29/2025-26

Earth work in Excavation for pipe trench in all kinds of soil and WBM in areas including dressing, watering and ramming and disposal of Excavated earth lead upto 50 meters and lift upto 1.5m, disposal earth to be leveled, neatly dressed.USOR. Item.no. 16.4 -P.no.207

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road In ordinary or Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR.Item.no. 16.6-(a) P.no.208

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209

Providing & laying mechanically mixed cement concrete 20mm nominal size graded crushed stone excluding cost of centering & shuttering. 1:2:4 (M-15) . USOR.Item.no. 16.23-P.no.210

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 90 mm dia HDPE 6 Kg/cm²

Providing, Laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as High Density Polyethylene pipes, PE 100 ) confirming to IS 4984/14151/ 12786/13488 with necessary jointing material llike mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other to form a monolithic & leak proof joint by thermosetting process. It] may be required to be done with Jack/ Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical iointed) USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.1 -P.no.9 , 110 mm dia HDPE 6 Kg/cm²

Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, CLASS PN 10, 80mm dia, USOR 4.41 P- 71

Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, CLASS PN 10,100 mm dia, USOR 4.41 P- 71

Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete, CLASS PN 10,150 mm dia, USOR 4.41 P- 71

Providing & fixing following cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointing material such as bolts,nuts and rubber insertion all complete as per IS :5312 (Part I ) 50 MM Class PN- 1.0Dia 8.4 a P-113

Providing & fixing following ductile iron single chamber triple function temper proof air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991, Class PN 10, 50mm dia USOR 4.50, P-73

Providing and laying including testing Bend 90̊ confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 , 90mm dia 6 kg/sq.cm

Providing and laying including testing Bend 90̊ confirming to IS specifications.USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.2 -P.no.9 110 mm dia 6 kg/sq.cm

Providing and laying including testing Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no. 10 90mm dia 6 kg/sq.cm

Providing and laying Bend 45 confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.3 -P.no.10 110mm dia 6 kg/sq.cm

Providing and laying including testing equal tee confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 90 mm dia 6 kg/sq.cm

Providing and laying including testing equal tee confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.4 -P.no.10 110 mm dia 6 kg/sq.cm

Providing and laying including testing pipe end confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.5 -P.no.10 90 mm dia 6 kg/sq.cm

Providing and laying including testing pipe end confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.5 -P.no.10 110 mm dia 6 kg/sq.cm

Providing and laying including testing reducer confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no.11 90 x75 mm dia 6 kg/sq.cm

Providing and laying including testing reducer confirming to IS specifications. USOR 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.6 -P.no.11 110 x90 mm dia 6 kg/sq.cm

Providing and laying including testing End Cap confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.8 -P.no.11 , 90 mm dia 6 kg/sq.cm

Providing and laying including testing End Cap confirming to IS specifications. USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.8 -P.no.12 110 mm dia 6 kg/sq.cm

Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange, GI Reducer UPVC MTA FTA etc. as per requiement of site i/c cost of labour etc. complete as per approved specification and as directed by Engineer in charge USOR 17.19 P 228

Provision for jointing of Rising main to sump well/OHT and OHT to Distribution pipe line with cost of material/specials such as Bends, MTA as per rerquirement of site i/c cost of labour with excavation, labour as per requirement complete as per approved specification and as directed by Engineer in charge.USOR 17.20 P-229

Construction of Brick masonry valve chamber with 20 cm thick wall in 1:6 C.M. with 12mm thick 1:4 Cement Plaster and base course 10 cm. thick in M-15. Inside Dimensions 90x60x100cm with - Heavy Duty SFRC chamber cover with frame size 130cm x 100cm x 10cm including cost of materials, labour etc. complete. USOR 2nd Amendment OF Issued vide order no. 254 dt 06.08.2020 p-7

Filling available excavated earth in trenches, plinth Filling available excavated earth in trenches, lead up to 50m and lift up to 1.5m in all kind of soil excluding watering and ramming.. USOR.Item.no.16.10 (b)-P.no. 208

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20mm dia MDPE Pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.1 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.2 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) . USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.3 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe upto 5 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.4 -P.no. 1

Providing making and testing of Consumer Service Connection (Functional House Hold Tap Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro Fusion Saddle, brass insert flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE 20mm dia/Gl pipe 15 mm dia (medium class), brass tap with Stainesless steel coating etc. all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), Pre-fabricated cement concrete platform in CC M-20 grade over 75 mm thick M-10 (1:3:6) base and Pre-fabricated Milestone shaped cement concrete stand post as per attached drawing and specifications. Complete item. For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and road (OTHER THAN CONCRETE ROAD) crossing is necessary. USOR 8th Amendment OF Issued vide order no. 368 dt 27.01.2023 Item.no.17.41.5 -P.no. 2

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes & heavy duty sockets and jointing materials all complete. Pipes and sockets confirming to IS:1239-2011 Part-II. 50mm dia, class medium with heavy dufy seamless sockets. USOR 6th &7th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 17.38.1 -P.no.32

11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area including labour complete. (Schedule Ref. C-1.2 of MPMKVVCL for SOR 2019-20)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP including labour complete. (Schedule Ref. C-5.2 of MPMKVVCL for SOR 2019-20)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line including labour complete. (Schedule Ref. C-5.1 of MPMKVVCL for SOR 2019-20)

L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter including labour complete. 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger)(Schedule Ref. D-3.2 of MPMKVVCL for SOR 2019-20)

11/0.4 KV out-door type transformer sub-station. 25 KVA on 140 kg. 8.0 meter long PCC Pole including labour complete.(Schedule Ref. E-1.1 of MPMKVVCL for SOR 2019-20)

Fabrication, Providing and fixing of typical information board of size 1.50mX0.90m made out as detailed belowl. Tow vertical support (post) made out from ISA angle 50.X50X6mm this shall be minimum 0.75m below GL and 2.25m above GL. The vertical post shall be erracted on 450mmX450mmXl000mm foundation blocks (250mm above GL and 750mm below GL) made of cement concrete 1:2:4. 2. The board shall be fabricated from l.6mm thick MS sheet of size 1.50mX0.90m, The frame of board shall be fabricated with angle ISA 40X40X6 cross member support from'behind and flat 20X5mm support all around board. 3. Whole structure shall be painted by standard color with lettering, border, heading, and logo etc using synthetic enamel paint of superior quality including supply, welding, excavation, concreting, painting of base, border and lettering, painting and other required details etc complete as directed by Engineer in charge USOR. 6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 17.48 -P.no. 32

Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. USOR.6th Amendment OF Issued vide order no. 09 dt 07.01.2022 Item.no. 9.14 -P.no. 17 Electro Fusion Equal Tee 90 mm dia Item.no.9.14.2.8 -P.no. 17

Electro Fusion Equal Tee 110 mm dia Item.no.9.14.2.9 -P.no. 17

Electro Fusion End Cap 90 mm Item.no.9.14.5.8 -P.no. 19

Electro Fusion End Cap 110 mm. Item.no.9.14.5.9 -P.no. 19

Electro Fusion Reducer 110x90 mm dia. USOR Item.no.9.14.4.13 -P.no. 18

Electro Fusion Reducer 160x110 mm dia. USOR Item.no.9.14.4.19 -P.no. 18

Electro Fusion Coupler 90 mm dia. USOR Item.no.9.14.1.8 -P.no. 16

Electro Fusion Coupler 110 mm dia. USOR Item.no.9.14.1.9 -P.no. 16

Please Enable Macros to View BoQ information