15th Finance Tied (Drinking Water)

Drilling of Bore well with Hand Bore set to a finished dia of 112/165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges.couplings, cap etc., The entire work should be carried out as per IS -2800 Part I & II 1979. the rate inclusive of cost of overheads & Contractor's profit @13.615% ( 165mm dia upto 90m depth)

Supply and Transportation of 2.0 HP 25 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well.The rate inclusive of over heads and contractor's profit @13.615%

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,.For 2.0 HP Single phase motor , the rate inclusive of overheads & contractor's profit @13.615%

Cost and supply of 160 mm dia PVC pipe 6kg/cm2 PVC and G.I pipes and specilas inclusive of overheads & contractor's profit @13.615%

Cost and supply of 40 mm dia HDPE pipe 10kg/cm2 PVC and G.I pipes and specilas inclusive of overheads & contractor's profit @13.615%

Cost and supply of 40 mm dia GM NRV inclusive of overheads & contractor's profit @13.615%

Cost and supply of 160mm dia Bore cap inclusive of overheads & contractor's profit @13.615%

Cost and supply of 40mm dia MS Clamp set inclusive of overheads & contractor's profit @13.615%

Cost and supply of 3 core flat submersible cable wire 1.50mm2 inclusive of overheads & contractor's profit @13.615%

Cost and supply of 7/18 Alluminium service Wire inclusive of overheads & contractor's profit @13.615%

Cost and supply of 32A 415V fuse carries inclusive of overheads & contractor's profit @13.615%

Cost and supply of 40A Isolator inclusive of overheads & contractor's profit @13.615%

Machine slotting charges for 160mm dia. PVC pipe (6Kg/sq-cm)labour charges etc complete inclusive of overheads & contractor's profit @13.615%

Errection charge of Single Phase Centrifugal Monoblock, Submersible Monoblock, Bore well Submersible Pumpset etc complete inclusive of overheads & contractor's profit @13.615%

Supply and delivery of 75mm dia HDPE Pipes PE-100, 6 Kg/cm2 as per IS 4984/2016 including cost, conveyance for 1.00 Rmt , the rate including overheads and contractor's profit @13.615%, (Trench size 0.70x1.00 mm) but excluding GST and Seigniorge charges, including overheads and contractor's profit @ 13.615%

Earth work excavation for Pipe line trenches 75mm dia HDPE 6kg /cm2 (2/3 machinery and 1/3 manual ) in all soils except rocky soils including lowering , laying and jointing of pipes with required fittings /specials true to alignment and gradient, refilling with already excavated earth, watering ,tamping and removing surplus earth and testing to required hydraulic test pressure etc.complete excluding cost of specials/fittings for finished item of work The rate is inclusive of cost of overheads and contractors profit @13.615% .

Provision for CC Road Cutting including Hire Charges of Cutting Machine, Labour Charges etc complete inclusive of overheads & contractor's profit @13.615%

Sand Filling in foundation including watering and ramming including cost and conveyance of all materials and labour charges etc.. Complete inclusive of overheads & contractor's profit @13.615%

Plain Cement concrete (1:2:4) Nominal using 20mm m/c chips Mix upto Plinth level including cost and conveyance of all materials and labour charges etc.complete for body walls of Culvert inclusive of overheads & contractor's profit @13.615%

Construction of Function Hold Tap Connections (FHTC) with supply & fixing of PP Clamp Saddle manufactured by injection moulding (virgin resin of PE-80/PE-100 having blue /black colour using food grade compound raw material with quality assurance cerificate for usage in drinking water system and having working pressure of 10 bar for 65 to 180mm dia main with 1/2" service connection) and supply and fixing of required materials such as Non-return cum flow control valve (with all three parts made by using solid steel bars of 316, wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be as per BS:6920 for effect on water quality, should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/1507 which are Compression male/female threaded adaptor (with SS insert D20 mmx 1/2"), Compression male/female threaded elbow (with SS insert D20 mmx 1/2")), including supply, delivery and fixing of 15mm dia B class GI pipe as per IS1239 with necessay GI fittings including 20mm dia HDPE pipe 16.0 Kg/cm2 pipes, earth work of trench excavation up to 0.50m depth), and 12.7mm dia Brass Bib cock long body Indian make heavy duty excluding GST and Seigniorge charges, including contractor' profit & overheads @ 13.615%. For 75mm dia HDPE

Providing Stand Post and Platform to FTHCs with CC(1:2:4) Platform of size 0.23x0.23x0.20m using 20mm HBG chips and embedded 110mmØ PVC 6Kg/sqcm PVC Pipe 0.90m in vertical posion around FHTC and filling with CC including cost and conveyance of all materials,Stenciling JJM Emblem and all albour charges etc., complete but excluding cost of FHTC Materials, including contractor' profit & overheads @ 13.615%.

CC Road Cutting for pipeline crossing including cost and coneyance of all materials and labour charges complete inclusive of overheads & contractor's profit @13.615%