Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.6 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹4.7 L+₹9,149.56 (2.00%)Rejected-Finance | 2 | Rejected-Finance highest |
| Sl No | Description | Qty | Unit | M V BHAKTHA VALSALAN L1 | BABURAJ ENNAZHIYIL L2 |
|---|---|---|---|---|---|
| 1.00M C F IMPROVEMENTS | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.47 | cum | 362.79 ₹169.06 Lowest | 370.06 ₹172.45 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.22 | cum | 9,314.78 ₹2,011.99 Lowest | 9,501.42 ₹2,052.31 |
| 1.00 | OD506688/2025-2026:Steel work for purlin/single section with GP tubular sections (round, square or rectangular hollow tubes etc). pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 299.48 | kg | 158.27 ₹47,398.38 Lowest | 161.44 ₹48,347.73 |
| 1.00 | OD506692/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | 60 | sqm | 629.06 ₹37,743.6 Lowest | 641.66 ₹38,499.6 |
| 1.00 | OD506693/2025-2026:Providing and fixing 150 mm wide square cut pvc 4kgf/cm2 rain water gutter pipe with iron brackets with 25*25 mm size flat ,screws andwashers etc including making necessary connections with rain water pipes etc complete | 15.5 | metre | 459.8 ₹7,126.9 Lowest | 469.01 ₹7,269.66 |
| 1.01 | 15.7.3:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In lime mortar | 10.55 | cum | 887.78 ₹9,368.74 Lowest | 905.56 ₹9,556.37 |
| 1.01 | OD506694/2025-2026:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | 19.5 | cum | 995.27 ₹19,407.77 Lowest | 1,015.21 ₹19,796.6 |
| 1.01 | OD506695/2025-2026:Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge | 97.5 | sqm | 2,391.11 ₹2,33,133.23 Lowest | 2,439.02 ₹2,37,804.45 |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 400 | kg | 179.95 ₹71,980 Lowest | 183.56 ₹73,424 |
Tender Value
₹4.2 L
EMD Value
₹10,396
Closing Date
16 Mar 2026, 10:00 amClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER, MARANCHERY GP
Annual Plan-Maranchery gp 2025-2026-Improvements to MCF BUILDING
2026_LSGD_844982_1
7/AE/LSGD/MRY/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
MARANCHERY
Please refer Tender documents.
12 documents required · 12 mandatory
₹920
Yes
₹10,396
Yes
7 Jul 2026
7 Mar 2026
17 Mar 2026
7 Mar 2026
16 Mar 2026
7 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1M C F IMPROVEMENTS | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.003 | OD506688/2025-2026:Steel work for purlin/single section with GP tubular sections (round, square or rectangular hollow tubes etc). pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 0.2 | kg | - | - |
| 1.004 | OD506692/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with
zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.005 | OD506693/2025-2026:Providing and fixing 150 mm wide square cut pvc 4kgf/cm2 rain water gutter pipe with iron brackets with 25*25 mm size flat ,screws andwashers etc including making necessary connections with rain water pipes etc complete | - | metre | - | - |
| 1.006 | 15.7.3:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In lime mortar | - | cum | - | - |
| 1.007 | OD506694/2025-2026:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade | - | cum | - | - |
| 1.008 | OD506695/2025-2026:Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge | - | sqm | - | - |
| 1.009 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1426802.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.04 MB
Tendernotice_2.pdf
PDF • 0.03 MB
Tendernotice_3.pdf
PDF • 0.02 MB
TENDERFORM.pdf
Tender Documents • 0.01 MB
FEREMITTANCEANDBIDSECIRITY.pdf
Tender Documents • 0.02 MB
SBD.pdf
Tender Documents • 1.05 MB
PRELIMINARYAGREEMENT.pdf
Tender Documents • 0.12 MB
AFFIDAVIT.pdf
Tender Documents • 0.10 MB
BOQ_1426802.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .