Kerala

AOC

Works

Civil Works - Buildings

Maintenance of various waiting shed

Local Self Government Department

Karimannoor G P | Idukki, Kerala

Amount: ₹1.3 LCloses: 21 Aug 2025Closed

Timeline

Published12 Aug 2025
Closed21 Aug 2025
Awarded16 Jun 2026

Bids

Item Rate

2 Bids16 Jun 2026

#	Company	Amount	Rank	Status
1	ANILKUMAR V M L1₹1.3 LAccepted-AOC ALAPPUZHA \| KERALA \| 686102	₹1.3 L	L1	Accepted-AOC L1
2	SHIBU MATHEW L2₹1.3 L+₹98.99 (0.08%)Rejected-AOC	₹1.3 L+₹98.99 (0.08%)	L2	Rejected-AOC L2

BoQ Comparative

Line Items (11)

Sl No	Description	Qty	Unit	ANILKUMAR V M L1	SHIBU MATHEW L2
1.00Maintenance of waiting shed
1.00	11.41A.2.2: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm	28.09	sqm	2,020.84 ₹56,765.4 Lowest	2,022.43 ₹56,810.06
1.00	OD168233/2025-2026: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	39.6	sqm	620.61 ₹24,576.16 Lowest	621.1 ₹24,595.56
1.00	OD168421/2025-2026:Plain G I ridge capping 225 mm flaps with 0.35 mm thick/ nearest available size SS screws including plain washers and bitumen washers etc complete.	6	metre	353.64 ₹2,121.84 Lowest	353.92 ₹2,123.52
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	100.92	kg	230.75 ₹23,287.29 Lowest	230.93 ₹23,305.46
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	40.68	kg	186.9 ₹7,603.09 Lowest	187.05 ₹7,609.19
1.01	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.16	cum	7,926.65 ₹1,260.34 Lowest	7,932.89 ₹1,261.33
1.01	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.24	cum	6,825.77 ₹1,631.36 Lowest	6,831.14 ₹1,632.64
1.01	13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).	2.38	sqm	353.51 ₹843.12 Lowest	353.61 ₹843.36
1.01	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	25.66	sqm	113.99 ₹2,924.98	113.94 ₹2,923.7 Lowest

Tender Value

₹1.3 L

EMD Value

₹3,176

Closing Date

21 Aug 2025, 12:30 pmClosed

Tender Inviting Organisation

Name

Assistant Engineer

Address

O/o the Assistant Engineer, Karimannoor G P

Work Description

Annual Plan-karimanoor Gp 2025 - 2026-Maintenance of various waiting shed

Tender Information

Tender ID

2025_LSGD_784341_15

Reference Number

2025_LIDEW_AE_KMNR2

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Karimannoor G P

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredPreliminary agreement (.pdf)

RequiredForm no 83 (.pdf)

RequiredTender fee remittance (.pdf)

RequiredEMD (.pdf)

Requiredintegrity pact certificate (.pdf)

RequiredSBD (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹3,176

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

16 Jun 2026

Published

12 Aug 2025

Bid Opening

21 Aug 2025

Download Starts

12 Aug 2025

Download Ends

21 Aug 2025

Submission Starts

12 Aug 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1288508.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ANILKUMAR V M

L1₹1.3 LAccepted-AOC

ALAPPUZHA | KERALA | 686102

SHIBU MATHEW

L2₹1.3 L+₹98.99 (0.08%)Rejected-AOC

Sl No	Description	Qty	Unit	ANILKUMAR V M L1	SHIBU MATHEW L2
1.00Maintenance of waiting shed
1.00	11.41A.2.2: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm	28.09	sqm	2,020.84 ₹56,765.4 Lowest	2,022.43 ₹56,810.06
1.00	OD168233/2025-2026: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	39.6	sqm	620.61 ₹24,576.16 Lowest	621.1 ₹24,595.56
1.00	OD168421/2025-2026:Plain G I ridge capping 225 mm flaps with 0.35 mm thick/ nearest available size SS screws including plain washers and bitumen washers etc complete.	6	metre	353.64 ₹2,121.84 Lowest	353.92 ₹2,123.52
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	100.92	kg	230.75 ₹23,287.29 Lowest	230.93 ₹23,305.46
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	40.68	kg	186.9 ₹7,603.09 Lowest	187.05 ₹7,609.19
1.01	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.16	cum	7,926.65 ₹1,260.34 Lowest	7,932.89 ₹1,261.33
1.01	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.24	cum	6,825.77 ₹1,631.36 Lowest	6,831.14 ₹1,632.64
1.01	13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).	2.38	sqm	353.51 ₹843.12 Lowest	353.61 ₹843.36
1.01	13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work	25.66	sqm	113.99 ₹2,924.98	113.94 ₹2,923.7 Lowest

Sl No

Description

Qty

Unit

ANILKUMAR V M

SHIBU MATHEW

1.00Maintenance of waiting shed

1.00

11.41A.2.2: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm

28.09

sqm

2,020.84

₹56,765.4

Lowest

2,022.43

₹56,810.06

1.00

OD168233/2025-2026: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

39.6

sqm

620.61

₹24,576.16

Lowest

621.1

₹24,595.56

1.00

OD168421/2025-2026:Plain G I ridge capping 225 mm flaps with 0.35 mm thick/ nearest available size SS screws including plain washers and bitumen washers etc complete.

metre

353.64

₹2,121.84

Lowest

353.92

₹2,123.52

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

100.92

230.75

₹23,287.29

Lowest

230.93

₹23,305.46

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

40.68

186.9

₹7,603.09

Lowest

187.05

₹7,609.19

1.01

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

0.16

cum

7,926.65

₹1,260.34

Lowest

7,932.89

₹1,261.33

1.01

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

0.24

cum

6,825.77

₹1,631.36

Lowest

6,831.14

₹1,632.64

1.01

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

2.38

sqm

353.51

₹843.12

Lowest

353.61

₹843.36

1.01

13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

25.66

sqm

113.99

₹2,924.98

113.94

₹2,923.7

Lowest