Loading…
Loading…
Tender Value
₹17.9 L
EMD Value
₹17,929
Closing Date
16 May 2026, 5:00 pmClosed
Executive Engineer, Tribal Welfare , K R Puram
K R Puram
Construction of Kitchen shed to APTWRJC for Boys at Barrinkalapdu (V), Jeelugumilli (M) of Eluru District . Est, Rs 25.00 Lakhs
931963
NIT No.27/2025-26/EE/TW/Gurukulam/Kitchens/DB,Dt.30.04.2026
OPEN - NCB
Buildings
ELURU
7 documents required · 7 mandatory
₹635
₹17,929
12 May 2026
12 May 2026
12 May 2026
Earth work excavation for foundations mechanical means up to 3m depth and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, , labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308) for Building Foundation
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for Drains
Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310
Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310 Data for finished item of work. APSS No.309 & 310
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310
Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed
Vibrated Reinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for For column footings
Vibrated Reinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete For PEDASTALS
Vibrated Reinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete For columns
Vibrated Reinforced Cement Concrete M20 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinth beam.
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)
Brick Masonry in superstructure with CM (1:8) prop with II Class bricks of size 23x11x7 cm, having crushing strength of not less than 40kg/cm2 including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc for finished item of work for Superstructure
Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Basement .
Plastering to even surfaces of wall with CM(1:4) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including , sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)
Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, screened sand, water etc., to site, , sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., for Uneven Surfaces of Brick Wall complete for finished item of work. (APSS 901,903 & 904)
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for ROOF SLAB 125 MM
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for ROOF BEAMS
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 12 mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work
Ceiling Plastering with CM(1:3) Prop: 12mm thick in single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, including , sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Shelves of 50mm thick
Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work.
VRCC M15 gradse using 20mm and 10mm HBG crushed metal with 330 Kgs of cement per 1 cum of concrete mechanically mixed, placed in positiom vibrating including curing for 14days complete as per drawings and technical specifications clause 802,803,1202 & 1202 MORD and 1500,1700 and 2100 MORTH including overhead charges and contract profit but excluding seignorage charges for 175 thick drain side walls.
Flooring and Treads with Polished shabad / Tandur stone minimum 15 to 18 mm thick of size (0.254M x0.254M) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including , labour charges for dressing of flooring stones etc., complete for finished item of work, .
Providing Skirting to internal walls and Risers of Steps to 15 cm height with Polished shabad / Tandur stone minimum 15 to 18 mm thick of size (0.254M x0.254M) length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including , etc., complete for finished item of work,
Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.
Cost supply of MS grills using 10mm safety grills at 100 mm C/c inluding cost & conveyance of all materials ,fabrication charges all labour charges etc complete for finished item of work.
Painting to New External Walls with two coats of Acrylic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)
Supply of PVC/SWR Pipe 4 Kg/sq.cm and Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice - 110 mm pipes
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and cold - 28.60 mm OD
Supply and fixing of CP long body bib cock fanly type deluxe heavy duty 12.7mm dia Indian make including all complete for finished item of work
Supplying & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko / Nice/ Senior or equivalent including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.
Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
Supplying & Fixing of ISI mark 25mm dia 2.00 to 2.20mm thick PVC conduit pipe concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, complete for finished item of work. (Pipe Make : Sudhakar / Modi / Atul)
Supplying & Fixing of ISI mark 25mm dia 1.60 to 1.80mm thick PVC conduit pipe concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (Pipe Make : Sudhakar / Modi / Atul)
Wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR PVC insulated 110V grade Copper Cable in the existing metallic / non-metallic conduct pipe with 6A / 10A 1 Way 1 Module Modular Switch, Celling rose and 8 Modular Horizontal / Vertical Cover Frame covering to switck control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Building.
Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 14/3.0mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)
Supplying and Run of 2 of 56 / 0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)
Supplying and fixing of Batten Holder(BH) /Slanting batten holder (SBH) in lieu of celling rose of light point complete with allconnetions and all labour charges with 0.5Watt LED bulb etc., complete for new installation.
Supply of 16A / 10A Modular Flush Fuse with Neon Indicator. Makes: Legrand Arteor / Schneider Zen celo/ CrabtreeMurano/ GM-Zenova/ Goldmedal (i-Push) all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.
Supply of 1200 mm length, Box type powder coated T8 LED tube light luminaire with necessary wiring suitable for fixing 1 No retrofit T8 LED tube but without tube and choke Makes:Greenlites / Fortune Art / Capart / GM / Goldmedal /Trinic/Kiran.
Supply and fixing of 8 Way SPN DB with IP 30 Protection suitable for Single phase Earth Leackage Circuit Braker (ELCB) / Residual Current Circuit Braker (RCCB) / Double Pole (DP) Isolator as incommer and 10kA SP MCB's as out going MCB's including internal connection, including labour charges for flush mounting, 1No 40A DP Isolator / RCCB / ELCB for incomer, 6-32A MCB's 6 Nos for outgoing etc., complete (Electrical Specification No. 4.4.1B)
Supply of mini modular stepped type electric regulator with cover from for ceiling fan 900/1200/1400mm sweep etc., complete for finished item of work.
Supply of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator.Makes :Crompton HS Plus / Havells ES PLUS/Orient Energy Star/ Halonix(Zephyr)/ Polycab(Synergy 50 ISI) / G.M. (Air Wave Premium with all accessories including giving connections and all labour charges etc., complete
Supply and Run of 4 of 10Sq.mm WPSC Aliminium cable along with No.10 SWG G.I bearer wire on both sides through PVC cleats with all accessories including labour charges etc., complete for service mains.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BID_DAJUA-KS-BRKPD.doc
TENDER_DOCUMENT • 0.48 MB
BRKPD-BOQ1.xlsx
TENDER_DOCUMENT • 0.02 MB
BRKPD Shedule A1.xlsx
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid