Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-Finance H NO 282 2 PURANI MANDI DISTT MANDI HP | L1 | Accepted-Finance Lowest | |
| 2 | L2₹2.4 L+₹16,530.45 (7.51%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹2.5 L+₹25,151.71 (11.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
Tender Value
₹2.2 L
EMD Value
₹4,500
Closing Date
2 Jun 2025, 10:00 amClosed
Executive Engineer
Executive Engineer Jal Shakti Division Mandi
Repair work Wall Painting and wood painting to typeIII quarter at Dharakothi Mandi
2025_HPIPH_106045_1
1931-70
Open Tender
Civil Works
Item Rate
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹4,500
14 Jun 2025
23 May 2025
2 Jun 2025
23 May 2025
2 Jun 2025
23 May 2025
Amount
Providing and fixing wood work in frames of doors, window, clerestory windows and other frames wrought, framed & fixed in position 2nd class deodar wood in all leads and lifts.
Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws. 40 mm thick 2nd class deodar wood in all leads and lifts.
Providing and Fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors, windows & clearstory windows i/c bright finished black iron enamelled hinges with necessary screws 40 mm thick (2nd class deodar wood) in all leads and lifts.
Providing & Fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats. square or round barswith round headedbolts and nuts by screws (ornamental grills) in all leads and lifts.
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete in all leads and lifts. 300 x 16mm
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc, complete in all leads and lifts. 250 x 10 mm
Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete in all leads and lifts. 125 mm
Providing and fixing oxidized M.S. hooks and eyes in all leads and lifts. 250 mm
Providing and Fixing of Cup Board with Action Tesa HDHMR (High Density High Moisture Resistant) Both Side Pre Laminated Board of size 18 mm. anti termite and dampness proof with out Back including all materials and fittings etc. in all leads and lifts as per the entire satisfaction of the Engineer - in - Charge in all leads and lifts.
Providing and Fixing 4 mm thick UV Sheet (Fully Water Proof) Ceiling of approved quality of ISI Mark i/c fixing to base frames with aluminium U & L angles, corners etc complete (frame work for base & cover fillets to be measured and paid for separately) in all leads and lifts.
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work in all leads and lifts.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 Itr/10 sqm over an under coat of primer applied @0.75 Itr/10 sqm of approved brand and manufacture in all leads and lifts.
Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Ceiling Fan 1200 mm sweep, Category-A
Providing and fixing high pressure uPVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. single equal branch, oval access door,collars, "P" or "S" trap etc., with clamps at 1.20 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc.in all leads and lifts. 110 mm dia
02BKYPS6327P1Z6 (BID ID -521133)
02ICWPS2887F1ZU (BID ID -521149)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .