General Civil Maintenance Work of Viaduct & 07 Metro Stations (i.e. Sardar Patel Stadium, Commerce Six Road, Gujarat University, Gurukul Road, Doordarshan Kendra, Thaltej and Thaltej Gam) excluding Old High Court Station of East-West Corridor Western Reach Section from Shahpur Ramp to Thaltej Gam Dead End of Ahmedabad Metro Rail Project Phase - 1

BILL OF QUANTITIES

1.0 The Bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers,

Special Conditions of contract, Scope of Work, Technical Specifications etc.

2.0 Schedule ‘A’ consists of DSR items for Civil works & AMC/R&B SOR works as detailed in Tender documents.

Tenderer has to quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘A’.

3.0 Schedule ‘B’ consists of Non DSR items for Civil works as detailed in Tender documents. Tenderer has to

quote percentage above/below/at par the rates against BOQ amount given in Schedule ‘B’

4.0 The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’, ‘B’ are for completed

and finished items of works and complete in all respect. It will be deemed to include cost of all plants,

labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification,

contractor’s profit, taxes and establishment/overheads, together with preparation of design and drawings,

all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the

5.0 The Summary Sheet of Bill of Quantity is given in Annexure – 1. The bidder may note that the quote shall

be inclusive of all taxes. The tax bifurcations is to be given in Annexure – 2 of the BOQ.

6.0 If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-

responsive and shall be rejected.

7.0 Tenderers shall quote their offer in Indian Rupees (Rs.) only. Tenderers are required to quote percentage

(%) above/below/at par in figures in the appropriate highlighted cell in the summary sheet.

8.0 Errors will be corrected by the employer for any arithmetical errors in computation or summation as per

contract conditions.

9.0 All the unit rates/ percentages should be filled in figures. In case of any discrepancy, the value provided in

words shall be treated as sacrosanct.

10.0 The work executed against all the BOQ items in Schedule ‘A’ & ‘B’ as detailed in tender document would be

paid on measurement basis.

11.0 The contractor may raise their “On Account” payments on monthly basis as per the status of work on the

last day of the respective month.

12.0 In case of Schedule A item the description is given in brief and detailed description of item should be as

given in respective ie., DSR, AMC SOR, R&B SOR.

13.0 The financial bid is to be submitted online on https://tender.nprocure.com. The other relevant clauses of

submission of bid is clarified in ITT, Para / Clause D1 to D11

GMRC 2026 Page 2 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

FINANCIAL BID FORM

To : The Managing Director,

Gujarat Metro Rail Corporation (GMRC) Limited

Address : Block No.1, First Floor, Karmayogi Bhavan, Behind Nirman Bhavan,

Sector 10/A, Gandhinagar: 382010, Gujarat, India

Name of work: -“General Civil Maintenance Work of Viaduct & 07 Metro Stations (i.e.

Sardar Patel Stadium, Commerce Six Road, Gujarat University, Gurukul Road, Doordarshan

Kendra, Thaltej and Thaltej Gam) excluding Old High Court Station of East-West Corridor

Western Reach Section from Shahpur Ramp to Thaltej Gam Dead End of Ahmedabad

Metro Rail Project Phase - 1.”

1. Having examined the site of works and Bid Documents, comprising Instructions to Bidders, Scope of

works, Conditions of Contract, Technical Specifications, Bill of Quantities I/we, the undersigned offer to

execute and complete such works and remedy any defects therein in conformity with the said bid

documents for the sum of Rs. (Refer Annexure – 1 ) or such other sum as may be ascertained in

accordance with the said Bid documents.

2. We undertake, if our Bid is accepted, to commence the work from issuance of LOA / receipt of the

order to commence the work, and to complete and deliver the sections and whole of the works

comprised in the Contract within the period (i.e. 24 Months) stated in the bid hereto.

3. If our Bid is accepted, we will furnish Performance Security (ies) in the form of a Bank Guarantee to be

jointly and severally bound on us, in accordance with the Conditions of Contract.

4. We agree to abide by this Bid for the period of One Hundred & eighty (180) days from the last date

fixed for Bid Submission and it shall remain binding upon us and may be accepted at any time before

the expiry of that period.

5. We confirm our agreement to treat the Bid documents and other records connected with the works as

secret and confidential documents and shall not communicate information contained therein to any

person other than the person authorised by the Employer or use such information in any manner

prejudicial to the safety and integrity of the works.

6. Unless and until an agreement is prepared and executed, this Bid, together with your written

acceptance thereof, shall constitute a binding Contract between us, but without prejudice to your right

to withdraw such acceptance without assigning any reasons thereof.

7. We understand that you are not bound to accept the lowest or any bid you may receive.

We attach herewith proof of submission of income tax returns along with profit & loss statement attached

with tax returns.

Yours faithfully,

Authorised Signature :

GMRC 2026 Page 3 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Tender Notice No. : GMRC/CIVIL MAINTENANCE /WR/PH-1/2026

“General Civil Maintenance Work of Viaduct & 07 Metro Stations (i.e. Sardar Patel Stadium, Commerce Six

Road, Gujarat University, Gurukul Road, Doordarshan Kendra, Thaltej and Thaltej Gam) excluding Old High

Court Station of East-West Corridor Western Reach Section from Shahpur Ramp to Thaltej Gam Dead End of

Ahmedabad Metro Rail Project Phase - 1.”

Annexure – 1 (i.e. Summary Sheet of Bill of Quantity)

Rate to be Quoted by the Tenderer

Sr. No Schedule

In Figures In Words

(% above/below) (% above/below)

(DSR/SOR Items)

(Non DSR Items)

Total Amount (INR) In Figures

Total Amount (INR) In Figures

(Inclusive of all taxes)

1.0 The tenderer shall quote a single percentage (Above/Below/At Par ) at SN. 1 & 2 of this Summary Sheet only and nowhere else.

2.0 The bidder’s quote to be filled in Annexure – 1 (i.e. Summary Sheet of Bill of Quantity), it should be inclusive of all taxes.

3.0. The tax bifurcations to be filled in Annexure – 2 (i.e. Details of Taxes and Duties).

GMRC 2026 Page 4 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

GUJARAT METRO RAIL CORPORATION

Bill of Quantity

“General Civil Maintenance Work of Viaduct & 07 Metro Stations (i.e. Sardar Patel Stadium, Commerce Six Road, Gujarat

University, Gurukul Road, Doordarshan Kendra, Thaltej and Thaltej Gam) excluding Old High Court Station of East-West

Corridor Western Reach Section from Shahpur Ramp to Thaltej Gam Dead End of Ahmedabad Metro Rail Project Phase - 1.”

SN. Schedule - A Unit Qty Rate Amount

All item of work which are not covered in BOQ but are required to be carried out as

per direction of Engineer, will be based on list of concerned item as available in latest

Schedule of Rates (SOR) of work.

i. Schedule of Rates DSR -2023 CPWD

ii. Schedule of Rates of SCHEDULE OF RATES FOR BUILDING WORKS AHMEDABAD CITY

(AMC) YEAR:-2023-24 issued by GOVERNMENT OF GUJARAT ROAD AND BUILDING

iii. SCHEDULE OF RATES FOR BUILDINGS, ROADS & BRIDGES WORKS OF AHMEDABAD

DISTRICT for the year 2023-24 of Road & Building (R&B) Department of Government

iv.Delhi Schedule of Rates (E&M)

v.Delhi Schedule of Rates (mechanical)

Note:The order of preference for adopting the Rates will be in accordance with as first

preference being at (i) and the last preference being at (iii) above, till the availability

of concerned items in the respective schedule of Rates.

Total of Schedule-A

GMRC 2026 Page 5 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Schedule-B (NDSR Items):-

Sr No Sub-Schedule- B.1 (Doors/Windows/Railing) Unit Rate

Providing & fixing 10mm dia stainless steel tower bolt 200mm

1 NDSR-1 long with all screws etc. complete as directed by engineer in Each ₹

Providing & fixing of stainless steel L-drop 12 inch with all nuts,

screws drilling by employing skilled carpenter in non-fire door

2 NDSR-2 Each ₹

along with a pad lock (pad lock make; Harrisons or its

equivalent) all complete as per the direction of Engg-in-charge.

Providing and fixing stainless steel D-shaped door handle as

confirming to grade 304.(Minimum length of 200 mm to

3 NDSR-3 Each pair ₹

250mm, Make-dorma or equivalent) complete as per direction

of engineer in charge.

Providing and fixing chromium plated brass 100mm mortice

4 NDSR-4 latch and lock with 6 levers and a pair of lever handles of Set ₹

approved quality with necessary screws etc. complete.

Providing and fixing Aluminium door stops/wall stoppers to

5 NDSR-5 flush doors or panelled solid and glazed doors, etc., complete as Each Shutter ₹

per drawings and directions of engineer in charge.

Providing and fixing aluminium extruded section body tubular

type universal hydraulic door closer (having brand logo with ISI,

IS : 3564, embossed on the body, door weight upto 36 kg to

6 NDSR-6 each ₹

kg and door width from 701 mm to 1000 mm), with double

speed adjustment with necessary accessories and screws etc.

Providing & fixing EL Bihari hinge in aluminium door /window

7 NDSR-7 Each Set ₹

Providing & fixing of aluminium handle set with locking

8 NDSR-8 Each ₹

arrangement for aluminium window shutter as per approved

GMRC 2026 Page 6 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

quality with required screws complete as per direction of

Engineer-in-Charge.

Providing and fixing of high pressure laminated board

confirming to code BS EN-438-2015 of 12mm thickness for

partition and doors with all necessary fittings, fasteners, screws

and rubber strip for the groove in the plaster for reducing noise

level of door closing etc. required as per approve design and

colour, complete as per direction of engineer in charge.

Spraying and applying aldrine for anti-termite treatment of wall

doors and wooden cupboard /almirah and kitchen cabinet.

Aldrine to be sprayed on wall by making hole using drilling

machine and on doors & wooden cupboard/almirah and kitchen

cabinets by injection/gun/applicator. Work will be carried out in

10 NDSR-10 Each ₹

presence of qualified supervisor to ensure safety of applicator

and other staff as well as residents of the flats. Rates are

inclusive of all required material, machine, gun and all skilled

and unskilled labour, lead and lift, ascent-decent complete as

per direction of Engineer-in-Charge.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

11 NDSR-11 diluted with 5 liters SMT ₹

of water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

GMRC 2026 Page 7 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

12 NDSR-12 6131_paret-II Consentration Weight one percent is SMT ₹

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

surface is recommended as per I.S

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical

13 NDSR-13 emulsion diluted with 19 liter oil base. Total solution will be 20 SMT ₹

liters inclusive of one liter chemical emulsion application at the

rate of 7.5 litre

chemical / Sqm of surface is recommended as per I.S.

Providing and fixing panic bar / latch (Double point) fitted with a

single body, Trim Latch &

14 NDSR-14 Lock on back side of the Panic Latch of reputed brand and Nos ₹

manufacture to be approved by the

Engineer- in- charge, all complete.

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and

15 NDSR-15 Kg ₹

bolts complete, i/c fixing the railing with necessary accessories

& stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-in-

GMRC 2026 Page 8 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such

as nuts, bolts, steners etc.).

Providing and fixing hand rail of approved size by welding etc. to

steel ladder railing, balcony

railing, staircase railing and similar works, including applying

16 NDSR-16 Kg ₹

priming coat of approved steel

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and applying a

17 NDSR-17 priming coat of approved steel Kg ₹

primer, including welding and bolted with special shaped

washers etc. complete.

Hot finished welded type tubes

Sr No Sub-Schedule- B.2 (Toilet/Washroom/Plumbing/PHE) Unit Rate

Providing and fixing of CI grating 200x200 mm with all required

18 NDSR-18 materials and labour complete as per direction of Engineer-in- Each ₹

Charge, nothing shall be paid extra.

Providing and fixing Floor trap Stainless Steel jali over existing

19 NDSR-19 Nos ₹

GMRC 2026 Page 9 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing white vitreous china pedestal type water

closet (European type )with seat and lid, 10 litre low white

various china flushing system & C.P flush bend with fittings & C.I

Basets, 40mm flush bend, overflow arrangement with special of

20 NDSR-20 Each ₹

standard make and mosquito proof coupling of approved

municipal design complete , including painting of fittings and

brackets, cutting and making good the walls and floors

wherever required.

Providing and fixing Flushing Cistern (Make - Hindware or

21 NDSR-21 Each ₹

Equivalent) Cat. No.

Providing and fixing wash basin with C I brackets, 15 mm C. P.

brass pillar taps, 32mm C.P. brass waste of standers pattern

including painting of fittings and brackets , cutting and making

22 NDSR-22 Each ₹

good the walls wherever require. White Vitreous China wash

basin size 630x450 mm with a pair of 15mm Cc.P brass pillar

Providing and fixing Angle Valve (Make - Jaquar or Equivalent)

23 NDSR-23 Each ₹

Code: FLR-5053N

Providing and fixing Bib Cock (Make - Jaquar or Equivalent)

24 NDSR-24 Each ₹

Code: FLR-5037N

Providing and fixing Pillar Cock (Make - Jaquar or Equivalent)

25 NDSR-25 Each ₹

Providing and fixing of jet spray with flexible tube made of Volga

26 NDSR-26 Each ₹

or approved quality.

Providing and fixing of bib cock with health faucet with flexible

pipe of appropriate length with a separate stop cock for the

27 NDSR-27 Each ₹

health faucet. The cost to include all fittings and fastenings all

complete as required

GMRC 2026 Page 10 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing PVC Connection (Make - Jaquar or

28 NDSR-28 Each ₹

Equivalent)Code: ALD-805

Providing and fixing white vitreous china flat back or wall corner

type lipped front urinal basin of 430x260x350 mm size with

automatic flushing cistern with standard flush pipe and C.P

29 NDSR-29 brass spreaders with brass unions and GI clamps complete, Each ₹

including painting of fittings and each brackets cutting and

making good the walls and floors wherever required. One urinal

wash basin with 5 litre white PVC automatic flushing cistern

Providing and Fixing of WC seat Cover , complete with all

accessories required as per direction of Engineer-in-charge.

CERA make (B1510108) or equivalent

30 NDSR-30 Each ₹

Testing of potable water as per the standard of local (As per IS

10500) water supply authority (I/c supplying of water sample to

31 NDSR-31 the laboratory) and providing the sample test report to EIC. Each ₹

Cleaning of underground water tank of all the sections/Capacity

of tank by emptying of water in other tanks or in a separate

storage device to avoid the wastage of water. The rates are

inclusive of all taxes, men, materials, safety equipments and

32 NDSR-32 Per Tank ₹

other required resources. Nothing shall be paid extra and work

shall be paid extra and work shall be carried out as per direction

of Engineers in charge. The tank shall be cleaned on half yearly

basis and report shall be submitted to GMRC.

GMRC 2026 Page 11 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing UPVC soil and waste pipes ISI marked / SWR

with solvent cement / rubber ring joints and further protected

with fibreglass paste, including all specials such as bends, tees,

reducers etc with or without door as required, including any

cutting and making good of floors / walls that may be necessary,

clamps and stays as per requirements. The pipes laid above the

floor level (sunken level) should be rigidly fixed with PCC

bedding and levelled at every one metre intervals

34 NDSR-33.1 [A] 50mm Dia 6 Kg/cm2 Rmt ₹

35 NDSR-33.2 [A] 75mm Dia 6 Kg/cm2 Rmt ₹

36 NDSR-33.3 [B] 110mm Dia 6 Kg/cm2 Rmt ₹

37 NDSR-33.4 [C] 160mm Dia 6 Kg/cm2 Rmt ₹

PVC PIPE 160 MM: Providing and laying 160mm dia & 6kg

38 NDSR-34 pressure PVC pipe for drainage, all work complete as directed Rmt ₹

by engineer in charge. (make - as per approved list).

Providing and fixing PVC P-trap /multi-trap /Nahani-trap of

110mm dia for kitchen /bathroom with demolishing of kota

stone/cement concrete flooring of required area or up to

sqm for rectification of seepages and repairing the same as

39 NDSR-35 Each ₹

above, including the cost of materials i.e. PVC P-trap/multi-

trap/Nahani trap, solvent, piece of PVC pipe, Kota stone,

cement concrete or other materials, labour charges, taxes etc.

complete as per direction of Engineer-in-charge.

Providing and fixing UPVC/CPVC ball valve of approved quality,

40 NDSR-36 High or low pressure ,with plastic floats complete as directed by

engineer in charge.

20 mm nominal bore

41 NDSR-36.1 Each ₹

GMRC 2026 Page 12 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

25 mm nominal bore

42 NDSR-36.2 Each ₹

32 mm nominal bore

43 NDSR-36.3 Each ₹

40 mm nominal bore

44 NDSR-36.4 Each ₹

50 mm nominal bore

45 NDSR-36.5 Each ₹

65 mm nominal bore

46 NDSR-36.6 Each ₹

Mirror of staff toilet - Providing and fixing toilet mirror made of

6mm thick BWP ply with craft paper fixed to wall with

47 NDSR-37 screws/wooden plugs 5mm thick float glass mirror etc. including Sqm ₹

all necessary arrangement complete as per direction of

engineer in charge. (Make - as per approved list).

Providing and fixing vitreous toilet paper holder of vitr with

48 NDSR-38 mortar / white cement with all fittings and fastenings all Nos ₹

complete as required

Providing and fixing of CP grab rail in PWD Toilet. The cost to

49 NDSR-39 Nos ₹

include all fittings and fastenings all complete as required

Providing and fixing Urinal Partition of 20mm thick of approved

50 NDSR-40 material granite as specified. The cost shall include all fittings Nos ₹

and fastenings all complete as required

Providing and fixing automatically operated Hand Dryer with in-

51 NDSR-41 built heating unit and twin blowers of NovoTech or equivalent Nos ₹

GMRC 2026 Page 13 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Cleaning of terrace/loft water storage tank (inside surface area)

2000 litre capacity at all heights with coconut brushes, duster

removal of silt, rubbish from the tank and cleaning the tank with

water disinfecting with bleaching powder @ 0.5gm per litre

of tank including marking the date of cleaning on the side of

body with the help of stencil and paint and disposing of malba

52 NDSR-42 all litre ₹

complete as per direction of Engineer-in-Charge. (The old date

written on tank should be removed with paint remover or black

and if date is not written with the stencil or old date is not

deduction will be made @ Rs. 0.10 per litre) (if during cleaning

GI fittings or ball cock is damaged that is to be repaired by

at his own cost and nothing extra will be paid on this account)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of

53 NDSR-43 pipes & fittings with one step CPVC solvent cement, trenching,

refilling & testing of joints complete as per direction of Engineer

GMRC 2026 Page 14 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

54 NDSR-43.1 [A] 15 mm. Rmt ₹

55 NDSR-43.2 [B] 20 mm. Rmt ₹

56 NDSR-43.3 [C] 25 mm. Rmt ₹

57 NDSR-43.4 [D] 32 mm. Rmt ₹

58 NDSR-43.5 [E] 40 mm. Rmt ₹

59 NDSR-43.6 [F] 50 mm. Rmt ₹

Supply and Fixing PVC floor trap 125 x 75mm self-cleansing

design with or without vent arm, Inlet receiving cap of 50 &

60 NDSR-44 Nos ₹

40mm dia complete Including cutting and making good the

walls and floors

Supply of materials & Constructing brick masonry Rain Water

!!. 'A' class Table Molded bricks in cement mortar 1:S (1 cement:

61 NDSR-45 5 fine sand),

!. R.C.C. Top slab"wlth 1:2:4 Mix (1 Cement: 2 coarse sand:

,s aggregate), foundation concrete

62 NDSR-45.1 Inside size of 600 x 600 depth of 600mm with RCC cover Each ₹

Supply installation testing and commissioning water cooler

having nominal cooling capacity of 40 liters per hours, with

liters storage tank with 2 nos. of faucets, one no goose neck

type (for glass filling) and other one fountain type {for drinking}

63 NDSR-46 Set ₹

both with separate mechanical lever control with 1.5 HP electric

otor for compressor to work on one phase 230 volts SO Hz AC

power supply WI th complete accessories including cutting and

making wall as required.

GMRC 2026 Page 15 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Cleaning of chocked sewer line by diesel running vehicle

mounting hydraulic operated high pressure suction cum jetting

sewer cleaning machine fitted with pump having 4000 litres

suction capacity and 6000 litres water jetting tank capacity

including skilled operator, supervising engineer etc. for cleaning

64 NDSR-47 Metre ₹

and partial desilting of manholes and dechocking of sewer lines.

Dechocking and flushing of sewer line from one manhole to

another by high pressure jetting system of 2200 PSI for sewer

line from 150 mm dia upto 300 mm

Sr No Sub-Schedule-B.3 (ACP/Rolling Shutter) Unit Rate

Providing and fixing (Aluminium Composite Panel) Sheet any

colour on existing frame as per requirement all complete in all

65 NDSR-48 sqm ₹

respect as per direction and satisfaction of Engineer-in-Charge

4mm thick ACP (FR grade) of Aludecor ALAS color AD09

Annual repairing and maintenance of exixting rolling shutters

including dismentaling shutter and refinig the same and fixing of

new items as per requirement including

cleaning,oiling,greasing,alignment and testing complete.The

66 NDSR-49 Each ₹

cost of new items will be paid separatly except small hardware

like nuts/bolts and nails which are included in this item.The

scopre of work includes checking of shutters for smooth

functioning quarterly or as & when requires in emergency.

Providing hardware or other parts for smooth functioning of

67 NDSR-50 rolling shutter, items will be supplied as per CPWD

specifications.

68 NDSR-50.1 Brackets (sides) Each ₹

69 NDSR-50.2 Wire spring Each ₹

GMRC 2026 Page 16 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

70 NDSR-50.3 Spring holder Each ₹

71 NDSR-50.4 MS-Gararee device Each ₹

72 NDSR-50.5 Gear -Box Each ₹

73 NDSR-50.6 Rolling shutter Handle Each ₹

74 NDSR-50.7 Locking Naka/Kundee including welding Each ₹

75 NDSR-50.8 Ball Bearing Each ₹

76 NDSR-50.9 Gararee Rod Each ₹

77 NDSR-50.10 MS-Top Cover Mtr ₹

78 NDSR-50.11 Bottom Locking rail Mtr ₹

79 NDSR-50.12 M.S. Lathe Mtr ₹

80 NDSR-50.13 MS pipe shaft 2" dia Mtr ₹

81 NDSR-50.14 Side guide rail Mtr ₹

82 NDSR-50.15 MS Grill (for existing pattern) Sqm ₹

83 NDSR-50.16 Rolling shutter lever lock Each ₹

Oiling & greasing, repairing and welding of rolling shutter with

84 NDSR-51 accessories fittings all work completed as per direction of Each ₹

engineer in charge.(Accessories will be paid extra).

Sr No Sub-Schedule-B.4 (Carriage/Disposal) Unit Rate

Supply of canter on hire charges basis, for carriage of any

85 NDSR-52 Each ₹

material from metro stations to GMRC depots.

Clearing grass / bushes from ground level with the help of

tractor mulcher assembly/talwar/ hand held grass / bush

cutting machine including machine operator, fuel and all kind of

86 NDSR-53 Sqm ₹

blades required for cutting grass stems of bushes upto 5 cms dia

at a height of 15 cms from ground level and disposal of material

so cleared within 50m lead and as per satisfaction of E-I-C.

GMRC 2026 Page 17 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Disposal of Malba away from the premises through Dumper.

87 NDSR-54 Per Trip ₹

Rates are for each trip. (Minimum quantity of Malba = 8 cum).

Sub-Schedule-B.5 (Core Cutting/Expansion Joint/Grouting/Cold

Sr No Unit Rate

Bitumen/Waterproofing/PCC)

88 NDSR-55 Core cutting as per direction of engineer incharge

a) Core cutting work in RCC structure(Vertical as well as

89 NDSR-55.1 Inches Depth ₹

horizontal) -50 MM

b) Core cutting work in RCC structure(Vertical as well as

90 NDSR-55.2 Inches Depth ₹

horizontal) -100 MM

Providing and fixing Hilti Chemical fastener HIT-V-5.8,

M12x220mm of 12mm dia. including injecting HIT-RE 500 V3

chemical grout using injection gun including drilling of hole in

91 NDSR-56 RCC, concrete or brick masonry, cleaning the hole with pump, Each ₹

fixing the fastener, injecting the chemical etc. as per direction of

Engineer-in-Charge (Work during block hours in night) rates are

inclusive of GST and Carriage.

Providing, cutting and fixing Hilti chemical fastener

M16x200mm with HILTI chemical grout RE 500 V3 including

drilling of hole in RCC, Concrete or brick masonary, cleaning the

92 NDSR-57 Each ₹

hole with blow out pump, fixing the fastener with chemical

grout using chemical injecting gun etc. complete as per

direction of Engineer-in-charge.

Applying bonding agent on old surface of concrete including

93 NDSR-58 cleaning and preparation of surface with all T&P. (make - as per per set ₹

approved list ).

GMRC 2026 Page 18 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Expansion Joint: Compression seal joint

Providing and installing compression seal joint confirming to

specification including provision of edge beams at end edges of

94 NDSR-59 RM ₹

both at joining precast diaphragm segments, cast in situ units

and all related operations as required to complete the work as

specified in specifications.

Cleaning of existing joints (Expansion dummy and construction

joints) by removing old existing sealing compound by kerosene

oil, drying with blow lamp and filling again with Polysulphide

95 NDSR-60 Mtr ₹

Sealant of approved make including painting the sides of slabs

with primer of approved make complete as per satisfaction of

Engineer-in-charge.

Providing , placing and pasting Silicone Sealant WX of approved

make for sealing the surface of concrete to aluminium,

aluminium to glass , aluminium to aluminium, aluminium to

96 NDSR-61 Mtr ₹

masonry surface etc. With preparing the surface and placing the

sealent with the help of gun ,complete in all respect as per

satisfaction of E.I.C.

Providing and pasting of Sika multiseal tape 100 mm wide at all

97 NDSR-62 locations including all T&P, labour etc for cleaning the surface, Mtr ₹

applying the tape all complete as per direction of EIC.

Providing and supplying CICO Grout V1, premixed ultra high

98 NDSR-63 strength non-shrink cementitious grout or equivalent as Bag ₹

approved by Engineer-in-Charge.

Supplying of micro concrete chemical in 25 kg per bag make as

99 NDSR-64 Each ₹

per approved list of GMRC.

Supplying Cold Bitumen to site as per per dirction of Engineer-

100 NDSR-65 in-Charge Each Bag ₹

GMRC 2026 Page 19 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

PROVIDING AND LAYING SBR POLYMER AND CEMENT MIXTURE

101 NDSR-66 Sqm ₹

PROVIDING AND LAYING APP MODIFIED POLYMERIC

102 NDSR-67 MEMBRANE (3 MM THICK, REINFORCED WITH GLASS FIBRE Sqm ₹

Providing and applying polysulphide sealant including cost of

103 NDSR-68 backer rod and application of primer of different location as per RM

direction of Engineer-in-Charge for groove of size 80mm width

Providing, mixing and applying SBR polymer (of approved make)

modified Cement mortar

in proportion of 1:4 (1 cement: 4 graded coarse sand with

polymer minimum 2% by wt. of

cement used) as per specifications and directions of Engineer-

Note: Measurement and payment: The pre-measurement of

104 NDSR-69 thickness shall be done just after

the surface preparation is completed and Payment under this

item shall be made only after

proper wet curing has been done and surface has been

satisfactorily evaluated by sounding

/ tapping with a blunt metal instrument and/or the 75mm size

cube crushing strength at the

end of 28 days to be not less than 30 N/Sqmm2).

105 NDSR-69.1 12 mm average thickness. Sqm ₹

106 NDSR-69.2 25 mm average thickness in 2 layers. Sqm ₹

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural

107 NDSR-70 sources : 8 graded stone Cum ₹

aggregate 40 mm nominal size derived from natural sources)

GMRC 2026 Page 20 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Sr No Sub-Schedule-B.6 (Glass Work) Unit Rate

Providing & fixing in position glass

109 NDSR-71.1 5 mm thick heat reflecting glass Sqm ₹

110 NDSR-71.2 Extra for toughening 5 mm thick clear float glass Sqm ₹

Providing and fixing 6mm-10mm thick clear float glass in

aluminium door, window, ventilator, shutter and partitions etc.

111 NDSR-72 with PVC and neoprene gasket etc. complete as per Sqm ₹

architectural drawing and as per the directions of engineer in

charge. (make - as per approved list)

Providing and fixing of structural toughened glass 13.52 mm(

6.00+1.52+6.00) in all locations of metro stations including the

cost of sealing gaps with clear / coloured sealant / silicon of

112 NDSR-73 Sqm ₹

approved make and brand, cutting of groove (wherever

required ) including fixtures & fitings etc. complete as per site

requirement. ( make- as per approved list)

Providing and replacing 1000 mm TO mirror, covered with

powder coated covering having sun shade to existing hanging

member support from station roof/floor at the location as

113 NDSR-74 Each ₹

directed by Engineer- in - charge. Rates are inclusive of all

material, labour, scaffolding, cartage and all taxes etc. all

Providing and fixing toughened glass in partitions ,doors, faced,

counter etc. supported at bottom and sides with all necessary

114 NDSR-75 and fixture of approved make the glass to be fixed in wall/S.S

pipe/M.S framed structure as per approved design complete as

per direction of EIC(frame work and fittings to be paid

separately and for payment glass area only will be measured)

115 NDSR-75.1 a) 12 mm thick toughened glass Sqm ₹

GMRC 2026 Page 21 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

116 NDSR-75.2 b) 10 mm thick toughened glass Sqm ₹

117 NDSR-75.3 c) 8 mm thick toughened glass Sqm ₹

118 NDSR-75.4 d) 6 mm thick toughened glass Sqm ₹

Sr No Sub-Schedule-B.7 (False Ceiling/Flooring/Granite) Unit Rate

Providing and fixing tiled false ceiling of approved materials of

size 595 x 595 mm in true horizontal level, suspended on inter

locking metal grid of hot dipped galvanized steel sections

(galvanized @ 120 grams /sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to ger required

length and of size 24 x 38 mm made from 0.30mm thick

(minimum) sheet, spaced at 1200mm centre to centre to form a

grid of 1200 x 600mm and secondary cross "T" of length 600mm

and size 24x25 mm made of 0.30 mm thick (minimum) sheet to

be interlocked at middle of the 1200 x 600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3mm and

119 NDSR-76 laying false ceiling tiles of approved texture in the grid including, Sqm ₹

required cutting/making, opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc. Main "T"

runners to be suspended from ceiling using GI slotted cleats of

size 27x37x25x1.6mm fixed to ceiling with 12.5 mm dia and

mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85x30x0.8mm spaced at

1200mm centre to centre along main T, bottom exposed width

of 24 mm of all T-sections shall be pre-painted with polyester

paint, all complete for all heights as per specifications, drawings

and as directed by Engineer-in-charge. Providing and fixing of

Flex alum metal tile ceiling system manufactured by M/s.

GMRC 2026 Page 22 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Hunter Douglas India Pvt. Ltd or equivalent comprising of tile of

600 mm wide and 600 mm long manufactured out of 0.50mm

thick GI perforated for desired openings and patterns giving a

22% open area. The tile will be manufactured on advanced

equipment that includes several levelling stages in the

manufacturing process. Tile ends will be raised with pips and

stops to ensure positive engagement into the spring to enable

for de-mounting of individual panels. The tile sides will be

sufficiently high to ensure a minimum deflection across the

length of tile. All tiles will be bevel edged. The tile shall be

polyester based, powder coated in white colour. The tiles shall

be clipped into clip in profile of 0.50 mm thick G.I. The clip in

profile shall be supported from slab by means of rigid

suspension of 4 mm G.I. rod hold on clamps with clip.

GMRC 2026 Page 23 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and Installing in position as per approved sample

reflected ceilings plans 1200x600 perforated metal panel

ceilings demountable tray type made up of minimum 1mm thick

manufactured from GI corrosion resistant steel/ multi layer coil

coated sheets/ rolls. The pitch and dia of perforations shall be

as per approved design. The tiles shall be laid down on a

suitable grid system made up of minimum 1.5mm thick roll

formed galvanised steel sections. with suitable suspension

system with hangersplaced at a maximum distance of 2400mm

centre to centre. The ceiling system shall be powder coated to

120 NDSR-77 sqm ₹

approved shade & colour with a minimum thickness of S5

microns. On the top of the ceiling panel shall be lined with

factory fitted non woven accoutic felt of soundtex or equivalent

make, with a NRC value of 0.70. The celling system shall have

provision of fixing of lights, diffusers, speakers as per systems

contractors requirements. The ceiling system shall have an easy

mechanism of removing the tiles for inspection and access of

the services above.Provision of special access panels to be made

where marked on the drawings. All the suspension system and

substructure cost ls Included in the item.

Providing and fixing in position GI Gutter of 2mm thick sheet of

approved quality including fabrication and erection with self

tapping screws epdm washers with necessary laps and

121 NDSR-78 Sqm ₹

stiffeners, application of sealant, making provision for drainage

spout with all leads and lifts etc. Complete as per drawing and

specifications. ( Measurement to be as per profile area)

GMRC 2026 Page 24 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing removable raised/ false access flooring with

system and its components of approved make for different

plenum height with possible height adjustment upto 50mm,

comprising of modular load bearing floor panels supported on

G.I. rectangular stinger frame work and G.I. Pedestal etc. all

complete, as per the architectural drawings, as specified and as

directed by Engineer-in-charge consisting of:a) Providing at

required spacing to form modular frame work, pedestals made

out of GI tube of thickness minimum 2 mm and 25mm outer

diameter, fully welded on to the G.I. Base plate of size 100mm X

100mm X 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mm x 75mm x 3.5mm welded with GI fully

threaded stud 16mm outer diameter with two Gi check nuts

screwed on the stud for level adjustment upto 50mm, locking

and stabilizing the pedestal head in position at the required

122 NDSR-79 Sqm ₹

level. The pedestals shall be fixed to the subfloor (base) through

base plate using epoxy based adhesive of approved make or the

machine screw with rawl plug.b) Stringers system in all steel

construction hot dipped galvanized of rectangular size

570x20x30x0.80mm thick having holes at both ends for securing

the stringers on to the pedestals head using fully threaded

screws ensuring maximum lateral stability in all directions, the

grid formed by the pedestal dns stringer assembly shall receive

the floor panel, this system shall provide adequate solid, rigid

support for access floor panel, the system shall provide a

minimum clear uninterrupted clearance between the bottom of

the floor for electrical conduits and wiring etc. all complete as

per the architectural drawings, as specified and as directed by

the Engineer-in-charge.c) Providing and fixing Access Floor

panel of 600x600x32 mm medium grade Filled steel antistatic

GMRC 2026 Page 25 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

high pressure Lamination of 800H grade (FS800H). Access Floor

panel shall be steel welded construction with an enclosed

bottom pan with uniform pattern of 64 hemispherical cones.

The top and bottom plates of steel Gauges : top 0.6mm and

bottom 0.7mm fused spot welded together (minimum 64 welds

in each dome and 20 welds along each flange). The panel should

be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyro

grip non-combustible Portland cementitious core mixed with

lightweight floaming compound. The access floor shall be

factory finished with Anti-static High Pressure laminate with

Non Warp technology upto 1mm thickness for superior

adhesion and Surface flatness within 075mm. The panel is to

withstand a Concentrated Load of 363 kgs applied on area

25mm X 25mm without collapse in the panel which is placed on

four steel blocks. The panel will withstand and Uniformly

Distributed Load (UDL) minimum 1500 kg/sqm and an impact

load of 50kg all complete as per the approved manufacturers

specification and as per the direction of Engineer-in-charge. All

specification must be printed on the side of the panel to ensure

the quality of the product.450 mm Finished Floor Height (FFH)

GMRC 2026 Page 26 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing 10 mm thick acid and / or alkali resistant

vitrified tiles of approved make and colour using acid and /or

alkali resisting mortar bedding and joints filled with acid and /

123 NDSR-80 Sqm ₹

or alkali resisting cement as per IS:4457 complete as per the

direction of Engineer-in-charge. For flooring on a bed upto

mm thick mortar 1:4 (1 appropriate cement : 4 coarse sand).

Providing and laying tactile tile (for vision impaired persons as

per standards) of size 300x300x9.8mm having with water

absorption less than 0.5% and conforming to IS: 15622 of

approved make in all colours and shades in for outdoor floors

124 NDSR-81 such as footpath, court yard, multi modals location etc., laid on Sqm ₹

20mm thick base of cement mortar 1:4 (1cement : 4 coarse

sand) in all shapes & patterns including grouting the joints with

white cement mixed with matching pigments etc. complete as

per direction of Engineer-in-Charge.

GMRC 2026 Page 27 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and laying broken white glazed China mosaic flooring

for plain and curved surfaces on terraces, floors, balconies,

roofs etc. comprising of 12mm to 20mm size broken pieces of

ceramic/ glazed tiles, laid over cement mortar 1: 3 bedding on

plain or sloped surfaces. The Treatment includes preparation of

surface as required for water proofing of roofs, balconies,

terraces etc consisting of following operations: (a) Apply of

slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with water proofing compount confirming to IS

and approved by engg. incharge over the slab including

adjoining walls upto 300mm height including the cleaning the

surface before the treatment. (b) Laying brick bats with mortar

using broken bricks/ Brick bats 25-115mm size with 50% cement

mortar (1:5) admixed with water proofing compound

confirming to IS 2645 and approved by engg. incharge over

125 NDSR-82 Sqm ₹

20mm thick layer of cement mortar of Mix 1:5 admixed with

water proofing compound confirming to IS 2645 to required

slope and treating similarly the adjoining walls upto 300 mm

height including rounding of junctions of walls and slabs. (c)

After 2 days of proper curing applying coat of cement slurry

using 2.75kg/sqm of cemment admixed jointless cement mortar

of mix 1:4 admixed with water proofing compound confirming

to IS 2645. (d) Providing and laying broken white glazed China

mosaic flooring for plain and curved surfaces on terraces, floors,

balconies, roofs etc. comprising of 12mm to 20mm size broken

pieces of ceramic/ glazed tiles, laid over cement mortar 1:

bedding on plain or sloped surfaces. The flooring shall be

tamped to bring the cement mortar cream upto the surface,

including rounding of junctions and extending them upto 30 cm

along the parapet. The rate shall include bands, if different

GMRC 2026 Page 28 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

colour is used, any pattern or design as per drawing and

direction, finishing with white cement, curing, cleaning with

water and oxalic acid, etc. complete at all levels, as directed and

to satisfaction to the engineer in charge. Rate shall include all

tools, tackles, machines, necessary scaffolding, adding of

waterproofing material as recommended in the bedding mortar

by the Engineer in charge. (e) The Whole terrace so finished

shall be flooded with water for a min. period of 2 weeks for

curing and for final testing as per the direction of Engg.

GMRC 2026 Page 29 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and laying vitrified floor tiles of light and dark shades,

in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS :

15622, of approved make, in all colours and shades, laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

126 NDSR-83 Sqm ₹

including grouting the joints (paper joints) with white cement

and matching pigments etc., complete. Size of Tile 600x600 mm.

Laser machines shall be used for cutting tiles for cut / corner

tiles and the cut edges shall be grounded smooth to obtain

straight and hairline joints.

Providing, laying, jointing, grouting including fixing in position to

backing, prepolished, 20 mm thick granite, in sizes not less than

600x1200x20mm and rubbed to smooth mirror finish

for Veneering/Cladding work to walls, beams, columns,

pilasters, fascia, upstands, jambs, sills, copings, soffits of

openings and beams, with grout mortar of thickness to be

ascertained at site so as to achieve true lines, levels, plumb,

planes etc. subject to a minimum thickness of 20 mm for the

grout cement mortar 1:4, and making of openings for service

and other outlets etc. all to pattern, design and details as per

127 NDSR-84 Sqm ₹

drawings or as directed and including preparing the backing to

receive the granite work, white cement mortar, mixed with

pigment to match colour of granite for bedding and

jointing, including curing, rubbing, sand blasting, washing,

cleaning, providing cut-out for services, machine cutting,

providing machine drilled holes, recesses, rebates for stainless

steel attachments/ fixings, providing movement joints etc. all as

per drawings, specifications and as directed complete

(stainless steel attachments/fixings shall be paid separately).

Provision to be made for "V" groove as per drawing,

GMRC 2026 Page 30 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

design and as approved by engineer. All shades and textures

of granite available in Quarries of Nearby states (Gujarat,

Rajasthan etc.,)

GMRC 2026 Page 31 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing, laying mirror polished granite stones 20mm thick, all

to required sizes, design, details and pattern as per

drawings, including diagonal, inlays, borders, margins in one

or more types of stone over prepared base mortar with ordinary

Portland Cement, fit jointed with/ without groove, with

white cement slurry mixed with pigment to match shade of

granite including all finishing, all as required, as per

specifications and drawings and as directed

complete in floors, landings with upto 30mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand) using hairline finish

(unless otherwise specified) and curing, rubbing, mirror

polishing / honing / sand blasting, washing, cleaning, making

cut out for services as instructed etc..

128 NDSR-85 Note: Mirror polished granite of all shades and textures Sqm ₹

available in Quarries of Nearby States (Gujarat, Rajasthan

etc.,), In approved polished (mirror/honed) Base Light Coloured

Granite stone slabs in minimum size 1200 mm x 600 mm in

flooring, In approved polished (mirror/honed) Dark Coloured

Type-1 Granite stone slabs in minimum size 1200 mm x

mm in flooring, In approved polished (mirror/honed) Dark

Coloured Type-2 Granite stone slabs in minimum size 1200 mm

x 600 mm in flooring, In approved sand blasted Light Coloured

Granite stone slabs in minimum size 1200 mm x 600 mm in

flooring, In approved sand blasted Dark Coloured stone slabs in

minimum size 1200 mm x 600 mm in flooring, In approved

mirror polished Green Kota stone slabs in minimum size

mm x 600 mm in flooring

129 NDSR-86 Dismantling of granite Sqm ₹

GMRC 2026 Page 32 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Sub-Schedule-B.8(Reparing Work Granite/False celling/False

Sr No Unit Rate

Flooring/Door/Windows/Door Lock/Tiles/Door Handle)

Repairing and refixing of door/windows shutter including

removal of shutter from chaukhat cutting where necessary

130 NDSR-87 removing and refixing butt hinges on other side of frame of Each ₹

shutter wherever required. (Cost of hinges including fixing shall

be paid extra).

Repairing of existing aluminium door and windows I/c opening

the section and refining the section as per the existing as per

131 NDSR-88 Each ₹

Repair of loose/damaged aluminium expansion joint strip with

132 NDSR-89 Sqm ₹

GP-2 or equivalent at Platform and concourse level.

Refixing of dry cladding upto 10 metre heights with 300mm

thick gang saw cut stone with (machine cut edges) of uniform

colour and size upto 1m x 1m, fixed to structural steel frame

work and/or with the help of cramps, pins etc. and sealing the

133 NDSR-90 Sqm ₹

joints with approved weather sealant as per Architectural

drawing and direction of Engineer-in-charge. (The steel frame

work, stainless steel cramps and pins etc. shall be paid for

refixing of old 15-30mm thick granite stone of required size and

shape of approved shade, colour and texture in

footpath,flooring in road side plasaz ,concourse,platform and

134 NDSR-91 similar locations, laid over 20mm thick base of cement mortar Sqm ₹

1:4 incliuding grounting the joints with white cement mixed

with mathing pigment, epoxy touch up etc. asper direction of

Engineer incharge.

GMRC 2026 Page 33 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Replacing existing floor tiles/granite including cutting existing

fixed tile/granite, dismantling tile/granite, removing all debris,

cleaning and fixing new tile/granite using suitable adhesive of

135 NDSR-92 Sqm ₹

Laticrete or approved equivalent, all complete as per direction

and satisfaction of Engineer-in- Charge. (This item does not

include cost of Tile/Granite which shall be paid extra)

Repairing/strengthening of existing raised false floor consisting

of pedestal and floor panels by providing extra support like the

provision of stringers made of 25mm MS square pipe etc. All

complete as per the direction of the engineer in charge. The

rates are inclusive of each individual materials, labours,

136 NDSR-93 Sqm ₹

machining/equipments all lead, lifts, transportation, painting

and priming of stringers with anti corrosive/fire retardent paints

etc. complete, panels will be properly re-fixed by maintaining its

shape, size, level, alignments free from any undulation

Sr No Sub-Schedule-B.9(PEB Painting/Bolt Tightening) Unit Rate

Removing of old paint, rust with help of power tool and

preparing the surface to various standards (ASA 3.0) before

application of primer. The rate will include all the tools, paints,

137 NDSR-94 labour and other consumables and incidental charges. Nothing Sqm ₹

extra shall be paid except item no. 2, 4 & 5. The surface which

are not accessible with the help of power tool shall be prepared

by the wire brush.

Cleaning the surface (roof truss at platform level) with

detergent, wire brush, tools for (inaccessible area) and making

138 NDSR-95 dust free. The work shall be carried out as per direction of Sqm ₹

engineer-in-charge and include all labour, maternilas. tools,

GMRC 2026 Page 34 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

plants, ladders, scaffoldings, spider, sfaety blets ect. all

complete ( surface preparation to chaleve St2).

Covering of flooring with terpoline to avoid any stain mark at

granite floors on daily basis including labour charges for

139 NDSR-96 Sqm ₹

spreading and rolling back daily. (The dust collected should be

disposed off to the specified place).

Providing and fixing of PP spider with necessary scaffolding,

ladders, materiakls, machines upto the height of 8m at platform

shed with all lead, lifts ascent, descent and transportation etc.

All complete rates are inclusive of all highly skilled and semi-

140 NDSR-97 Sqm ₹

skilled labour. work wil be carried out strictly in non-

operational hours as per direction of engineer-in-charge.

Wherever Spider net not possible to fix, payment of scaffolding

may be be given seperatly.

Applying surface tolerant epoxy coating in two coats with epoxy

based primer with minimum DFT of 200 micron and volume of

141 NDSR-98 solids not less than 75%. Paint is to be applied with spray Sqm ₹

painting in places where its inaccessible it may be applied with

brush. (Item to be used where surface is having scaling)

Application of finishing coat of(UV resistant coat) of minimum

142 NDSR-99 Sqm ₹

50 micron thickness on surface which is not having any scaling

GMRC 2026 Page 35 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Tighting of loose bolts pof all angles bracings in roof truss PEB

Structure by fitter/welder up to required torque using necessary

T&P as per direction of Engineer- In - Charge. Work will be

carried out by using existing arrangement of PP spider net with

neccessary scaffolding ladder etc.done during truss painting of

same station (No extra payment will be given for height or any

143 NDSR-100 Per station ₹

other arrangement, extra payment will be given for additional

MS plate/bolts/etc. if any). (Remark: If Only Tightening of Roof

truss PEB Structure nut bolts is carried out and painting is not

executed, Payment will be made extra for extra arrangement of

PP Spider and necessary scaffolding at rate of NDSR 104) (To be

carried out Annually for Metro stations)

Providing and fixing of Hi-tensile galva lume steel sheets of

0.5mm thickness for metro stations roof sheeting at all levels

and height including all tools, materials, labours, safety

equipments, etc all complete as per direction of engineer in

144 NDSR-101 Sqm ₹

charge. (make-as per approved list) of requined shape, colur

and size rate is also inclusive dismantling of old hanging/

damaged roof sheets and stacking of the same at station

premises as per directions.

Providing and fixing 10 mm thick poly carbonate sheet make GE

or equivalent and make confirming to IS 14443:1987) of

145 NDSR-102 required colour, fasteners, silicon sealant, EPDM gaskets and Sqm ₹

shade including self-drilling/self-taping screw as per

GMRC 2026 Page 36 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

"Providing and repairing the damaged concrete portion with

single component, fibre reinforced, dual shrinkage-

compensated thixotropic, cementious patch repair mortar

(having the technical parameters mentioned in material

specifications) capable of applying 25 mm thick in single layer

initially by hand and finishing with trowed carefully compacting

146 NDSR-103 Sqm ₹

the same around the rebars and finishing to bring it in line with

existing concrete surface with an average specified thickness

inclusive of manpower, material and equivalent Master Emaco

5348 of BASF renderoc HB-60 of Fosroc/Sikadur 41 of Sika or

(a) 25 mm thickness"

Sr No Sub-Schedule-B.10(Hire Machinary) Unit Rate

GMRC 2026 Page 37 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing, hiring, operating and maintaining Telescopic Manlift having

boom length of 25–30 meters on hire basis, complete in all respects

including deployment of skilled operator (driver), helper, fuel (diesel),

lubricants, insurance and all maintenance (routine, preventive and

breakdown), repairs, insurance, statutory approvals, permits and all

operational costs as directed by the Engineer-in-Charge (EIC);

The equipment shall be kept in safe, efficient and fully functional

condition at all times, and in case of breakdown the same shall be

rectified within 12 hours failing which no payment shall be made for

the entire breakdown period and penalty shall be applicable as per

SCC, and if the breakdown exceeds 12 hours, an equivalent or higher

capacity standby machine shall be deployed immediately at no extra

cost, failing which penalty shall be imposed on the contractor.

The contractor shall ensure mobilization/shifting of the Man-lift

within the contract Scope area within a maximum time limit of

47 NDSR-104 hours per km or part thereof as per EIC instructions with no extra Week ₹

payment for transportation, and any delay shall attract proportionate

penalty as per SCC; the rate shall be deemed to include deployment

of traffic marshal(s) and provision of all necessary safety

arrangements including barricades, reflective jackets, baton lights,

cones and warning signage for operation near traffic areas; the

contractor shall ensure availability of the machine for all working days

except one (01) weekly off, and no payment shall be made for idle

time, non-availability, breakdown or any inefficiency; the quoted rate

shall be firm, fixed and inclusive of all taxes, duties, insurance, labour

cess, statutory compliances and incidental charges, and nothing extra

shall be payable on any account whatsoever, with payment being

made only for actual working period duly certified by the Engineer-in-

The machine deployed shall not be older than 5 years from the date

of Manufacturing.

GMRC 2026 Page 38 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and Operating Diesel Truck mounted Boom Lift of 15-

20metre reach complete in all respects including deployment of

skilled operator (driver), helper, fuel (diesel), lubricants, insurance

and all maintenance (routine, preventive and breakdown), repairs,

insurance, statutory approvals, permits and all operational costs as

directed by the Engineer-in-Charge (EIC); The equipment shall be kept

in safe, efficient and fully functional condition at all times, and in case

of breakdown the same shall be rectified within 12 hours failing which

no payment shall be made for the entire breakdown period and

penalty shall be applicable as per SCC, and if the breakdown exceeds

12 hours, an equivalent or higher capacity standby machine shall be

deployed immediately at no extra cost, failing which penalty shall be

imposed on the contractor.The contractor shall ensure

mobilization/shifting of the Man-lift within the contract Scope area

within a maximum time limit of 2 hours per km or part thereof as per

148 NDSR-105 Week ₹

EIC instructions with no extra payment for transportation, and any

delay shall attract proportionate penalty as per SCC; the rate shall be

deemed to include deployment of traffic marshal(s) and provision of

all necessary safety arrangements including barricades, reflective

jackets, baton lights, cones and warning signage for operation near

traffic areas; the contractor shall ensure availability of the machine

for all working days except one (01) weekly off, and no payment shall

be made for idle time, non-availability, breakdown or any inefficiency;

the quoted rate shall be firm, fixed and inclusive of all taxes, duties,

insurance, labour cess, statutory compliances and incidental charges,

and nothing extra shall be payable on any account whatsoever, with

payment being made only for actual working period duly certified by

the Engineer-in-Charge.The machine deployed shall not be older than

5 years from the date of Manufacturing.

GMRC 2026 Page 39 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

149 Providing services for shifting/transportation of Man Lift

(Telescopic Sky Lift / Hydra Machine) from one work

location/section to another, including movement outside the

assigned section, as and when required, strictly as per the

instructions of the Engineer-in-Charge.

The transportation shall be carried out using suitable

Truck/Trailer, including loading, unloading, securing, transit

NDSR-106 Each ₹

handling, fuel, tolls, driver charges, and all other incidental

expenses, complete in all respects.

The rate shall be applicable for transportation distance up to

(Seventy) kilometers (lead).

The contractor shall ensure timely mobilization and safe

delivery of the equipment without any damage

KSB Three Phase Submersible Pump Set 9.3 kiloWatt Discharge

150 NDSR-107 Each ₹

Capacity 72000, IS:8034:2018 Compliant

Supply of 10KV generator set including the cost of diesel and

151 NDSR-108 Each Day ₹

generator including cost of operator.

Sr No Sub-Schedule-B.11 (Signage/Other Misc) Unit Rate

Reparing Signages :Repair damaged sign without replacing it

Preparing surface by removing all existing letters, symbols, base

paint, lamination if any etc. including required scaffolding etc.

152 NDSR-109 Providing and fixing digital print vinyl (3630 series of 3M or

equivalent) to existing sign board required colour with printing

as per signage schedule, laminated.

GMRC 2026 Page 40 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

153 NDSR-109.1 300mm X 300mm Nos ₹

154 NDSR-109.2 600mm X 400mm Nos ₹

155 NDSR-109.3 1200mm X 400mm Nos ₹

156 NDSR-109.4 1500mm X 400mm Nos ₹

157 NDSR-109.5 1800mm X 400mm Nos ₹

Manufacturing, supplying and fixing retro reflective signage

boards of 3mm ACP with high intensity encapsulated lens retro

158 NDSR-110 reflective vinyl Type-III, including all materials, fixing, rounding Sqm ₹

corners, complete as per specification.

Steel work in tubular sections with 50 micron pure polyester

159 NDSR-111 powder coating for signage frames, posts, suspenders; cutting, Kg ₹

hoisting, welding/bolting complete as per drawing.

Driver of 60W/100W/220W, IP65, lens option, 1W with 5-year

warranty (Osram/Vin/Samsung).

161 NDSR-112.1 60 watt Nos ₹

162 NDSR-112.2 100 watt Nos ₹

163 NDSR-112.3 200 watt Nos ₹

Site layout/main sign board (3mm ACP with retro reflective

vinyl), SS post 50mm dia, 1.6mm thick, height 1.6m.

165 NDSR-113.1 Size 1500mm X 1200mm Nos ₹

Supplying & installation of ACM material for photo-luminescent

fire exit sign.

167 NDSR-114.1 Size 275mm X 150mm Nos ₹

Directory board – frame of SS pipe 50mm X 50mm X 1.6mm

169 NDSR-115.1 Size 1500mm X 1350mm Nos ₹

170 NDSR-115.2 Size 750mm X 1350mm Nos ₹

171 NDSR-115.3 Size 600mm X 900mm Nos ₹

GMRC 2026 Page 41 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Supply & installation of laminated printed vinyl sheet (3M/LG

172 NDSR-116 sqft ₹

equivalent) on glass.

173 NDSR-117 Supply & installation of flex single side print as per design. sqft ₹

Supply & installation of flex board single-side digital print with

174 NDSR-118 sqft ₹

aluminium stand.

Providing and pasting vinyl digital print signages at all locations

175 NDSR-119 including all T&P, labour etc for cleaning the surface, pasting

signages all complete as per direction of EIC.

176 NDSR-119.1 a) On 3mm Sunboard Base Sqm ₹

177 NDSR-119.2 b) On 3mmAcrylic Base Sqm ₹

178 NDSR-119.3 c) On 3mm ACP base Sqm ₹

Providing, supplying and fixing High Intensity Retro reflective

sheet of approved make on 3mm ACP Sheet. (Cost of ACP Sheet

179 NDSR-120 shall be paid extra) as per direction and satisfaction of Engineer- Sqm ₹

Printing Matter for Signage

Providing and fixing acrylic hanging plate with printing on both

180 NDSR-121 sides of size 1 ft x 0.5 ft all complete in all respect as per Each ₹

direction and satisfaction of Engineer-in-Charge.

Providing and fixing 6mm thick SS Plate matt finish with 4no. of

holes of dia 8mm/10mm and four edge mirror grinding and duly

181 NDSR-122 finishing with floor, including drilling holes in floor and fixing Kg ₹

with screws, all complete as per direction and satisfaction of

Engineer-in- Charge.

GMRC 2026 Page 42 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Additional wiring for illuminated signage: Supply and wiring for

lighting/Receptacle in the existing conduit for lighting

circuits/single phase sockets from DB to the switch box with P +

N _+E copper FRLSZH 1.1 KV grade cable to connect all

182 NDSR-123 signage’s, LEDs, Lights, switches sockets etc. All wires shall be

terminated with Pin tyle lugs and provided with ferrules for

identification normally circuit mains start from DB, MCB and run

up to the switch box/MCB controlled lights up to first point.

Single circuit consisting of 3 Run 2.5 sqmm copper conductor

183 NDSR-123.1 RM ₹

FRL SZH 1.1 KV Grade cable

Double circuit consisting of 6 Run 2.5 sqmm copper conductor

184 NDSR-123.2 RM ₹

FRLSZH 1.1 KV Grade cable

LED Rope light for Glow type signage

185 NDSR-123.3 RM ₹

186 NDSR-123.4 Nos. ₹

Providing and fixing of Anti Birds Spikes made of high quality of

Poly Carbonate, 5 Row 304mm. Rates are inclusive of screws,

187 NDSR-124 cable ties, adhesives, fasteners up to 5 meter Height complete Mtr ₹

as per direction of Engineer-in-Charge.

GMRC 2026 Page 43 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Attending various day to day complaints consisting of repairs to

the doors, windows, tables, chairs, ventilation, leakage of pipe

lines, fixing the fittings using putty, nails, screws, minor paints in

parts not exceeding 0.50 sqm and rectifying the defects, cause

of complaints, with necessary T&P but without

changing/replacing the fittings/fixtures and its internal parts

and it shall be treated as one complaint only. This includes

maintenance of all the buildings and installations, involving

repairs & maintenance & attending the

complaints/faults/breakdowns and taking rectification action,

within specified time to ensure the 24 x7 operation of Metro

systems and installation/fixtures etc. [ material like screws/nails

for fixing of tower bolts/door handles etc. and washers/ thread/

sefeda etc. in bib cock pillar cocks etc. to prevent the leakage is

included in the rates.]

Note:- For one location attending one complete unit (such as

189 NDSR-125.1 one door, one window, one table, one ceiling unit of one room

one Almirah etc. shall be treated as one complaint.)

190 NDSR-125.2 Cost for Each complaint Each ₹

Fabricating and supply & fixing of stainless steel (conforming to

191 NDSR-126 grade SS 304 stain finish) four seater bench without backrest as Each ₹

192 Face (Wall mounted)

GMRC 2026 Page 44 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with anodizing

(thickness 20-75 micron) ISO-9001-2008 product with premium grade

anodizing as per qualanod and qualicoat international standards. With

lifetime warranty under normal working conditions. Signage depth 25mm

and inner thickness 1.5 mm with profile weight of 0.492 kg per meter.

193 NDSR-127 Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C vinyl with

over laminate/IJ480C non pvc vinyl with 8550 non pvc over

laminate/Diamond grade type-11. Retro reflective fixed inside with the help

of double sided tape. Signage will be fixed by passing screws from star corner

which will be fixed by drilling into the wall.

194 NDSR-127.1 Non-Lit Sqm ₹

195 NDSR-127.2 Lit/Illuminated (Less than 0.5 sqm face area) Sqm ₹

196 NDSR-127.3 Lit/Illuminated (Equal to or More than 0.5 sqm face area) Sqm ₹

GMRC 2026 Page 45 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Modular signage using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions. Signage depth 50mm. Profile outer

2.5 mm and inner thickness 1.5 mm with profile weight of

kg per meter. Corners used to create frame. 4mm FR grade ACP

98 NDSR-128 AL45 used on both sides with 3M IJ 180C vinyl with 8520 over

laminate/IJ480C non pvc vinyl with 8550 non pvc over

laminate/Diamond grade type-11 Retro reflective.For a IDDS

display box of approx. size 950 x 450 mm: A MS ( mild steel) RHS

50 x 25 x 3 mm horizontal member welded on a 10 mm thick

mounting plate supported by triangular gusset plate of 8 mm

thick. This structural mounting is stable enough for IDDS. A

cover plate of full or half size covers the mounting and gusset

199 NDSR-128.1 Non-Lit (Two sided) Sqm ₹

200 NDSR-128.2 Suspended (At Concourse Level)

GMRC 2026 Page 46 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C

vinyl with 8520 over laminate/IJ480C non pvc vinyl with

non pvc over laminate/Diamond grade type-11. Retro reflective.

The height of the pipe can be as per different locations on site,

height can be maximum up to 1.8 meter.

At Concourse Level - with two nos. SS sections for suspension.

SS316 CHS (Circular Hollow Section) of dia 38mm/1.5" to be

used to suspend a Display box of approx. 1220 x 450 mm.

202 NDSR-129.1 Non-Lit (Two sided) Sqm ₹

203 NDSR-129.2 Lit (Two sided) Sqm ₹

204 Suspended (At Platform Level)

GMRC 2026 Page 47 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Modular signages using aluminum extrusions (Alloy 6060) with

anodizing (thickness 20-75 micron) ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions.

Signage depth 50mm. Profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame. 4mm FR grade ACP AL45 used on

both sides with 3M IJ 180C vinyl with 8520 over laminate/IJ480C

non pvc vinyl with 8550 non pvc over laminate/Diamond grade

type-11. Retro reflective.

The height of the pipe can be as per different locations on site,

height can be maximum upto 1.8m. At Platform Level - with MS

sections for suspension. 40x40x3mm MS Pipe box sections to be

used to suspend a Signage box of approx. 1220 x 450 mm.

206 NDSR-130.1 Non-Lit (Two sided) Sqm ₹

207 NDSR-130.2 Lit (Two sided) Sqm ₹

208 Post (Non-lit)

GMRC 2026 Page 48 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

(Thickness 20-75 microns). ISO-9001-2008 product with

premium grade anodizing as per qualanod and qualicoat

international standards. With lifetime warranty under normal

working conditions. The weight per meter is 2.148 kgs and

profile thickness is 3.2mm.

I sign display frame: modular signages using aluminum

extrusions (Alloy 6060) with anodizing (thickness 20-75

micron).ISO-9001-2008 product with premium grade anodizing

as per qualanod and qualicoat international standards. With

lifetime warranty under normal working conditions.

209 NDSR-131 Signage depth 50mm. profile outer thickness 2.5 mm and inner

thickness 1.5 mm with profile weight of 0.839 kg per meter.

Corners used to create frame.

4mm FR grade ACP AL45 used on both sides with 3M IJ 180C

vinyl with 8520 over laminate/IJ480C non PVC vinyl with

non pvc over laminate/Diamond grade type-11- Retro reflective

fixed inside with the help of double sided tape.

For mounting the poles MS section fixed inside the octagonal

post, top covered with plastic caps and bottom base plate made

out of 10mm thick MS plate with round edges.

At Ground LevelFor mounting the poles MS Hollow Section

x 80 x 3.2mm Thk SHS, fixing with 16mm dia 600mm long J-

210 NDSR-131.1 bolts in Concrete foundations. Sqm ₹

GMRC 2026 Page 49 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

At Platform Level

For mounting the poles MS Hollow Section 80 x 80 x 3.2mm

211 NDSR-131.2 Thk SHS, fixing with 16mm dia 250mm long Threaded Sqm ₹

Provding and fixing Modular Totems using aluminum extrusions

(Alloy 6060) with anodizing (Thickness 20-75 microns). ISO-

9001-2008 product with premium grade anodizing as per

qualanod and Qualicoat international standards. With lifetime

warranty under normal working conditions. Sections can be

used to create totems up to 6m with variable depths as per

requirement. Basic profile with thickness 2mm and

kg/meter. Round cover profile of thickness 2mm and

213 NDSR-132 Sqm ₹

1.136 kg/meter. Ease of graphic change and maintenance.

The cost shall include complete foundation works including

earthwork, excavations, centering, shuttering, steel/RCC

materials, bolts etc.

Totem size shall be 1000mm breadth x 4000mm height

excluding foundations and base.

214 Channel Letters

GMRC 2026 Page 50 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Main station identity name shall be illuminated, exterior LED

channel letters, reverse letter made with 3 mm aluminum.

100 mm sides of signage by bendable Aluminum alloy. Both

back & side assemble with by argon welding. Top signage sheet

fabricated of 5mm thick, Opal cast A grade PMA sheet 3/4" ring

made of 5mm plexi.

215 NDSR-133 IP-65 high power chips LED modules (CE certified) 12V DC-1-1.4

watt beam angle 140/160.

Input Voltage 220V AC-input frequency 47Hz Max. Output

power 300/200/100W. The sign and the logo shall hallow lit

effect by LED's.

216 NDSR-133.1 Lit Channel Letters 600mm height Nos ₹

217 NDSR-133.2 Lit GMRCL Logo 1000 x 1000mm Nos ₹

218 Additional Structural steel required for ceiling Suspension

All structural steel shall be of tested quality and shall conform

to one of the following

219 NDSR-134 IS:226 Structural steel (Standard Quality) Kgs ₹

IS:2062 Structural steel (Fusion welding quality) Grade A (1992)

IS:961 High Tensile Structural Steel (Ordinary)

220 Offices / Door signages

GMRC 2026 Page 51 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing plate signs made in 2mm Aluminum Brush

finish Sheet neatly trimmed and corners rounded and dressed

with holes punched/drilled as per size given in drawing.

Graphics to be Plotter cut over self-adhesive vinyl as per

artwork and complete plate covered with a protective over

laminate as specified and duly approved by Engineer-in-charge.

Cost to include fixing of sign at location on to plastered

221 NDSR-135 Sqm ₹

surface/concrete/Granite cladding etc. including all marking,

alignment, drilling, and plugs. 4nos. mirror head bolt per

Mirror bolt head stainless steel screws complete as specified in

drawings and at locations approved by the Engineer-in charge.

GMRC 2026 Page 52 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing graphics printed on Opaque Vinyl directly

pasted on the glass surfaces. Printed over Opaque self-adhesive

vinyl as per artwork and completed and laminated with

protective over laminate as specified and duly approved by

Engineer-in charge. Cost to include fixing of sign at location on

to glass surface including its cleaning, marking, alignment,

complete as specified in drawings and at locations approved by

the Engineer-in-charge.Signs including all operations from

printing, fixing graphics with protective laminate, and

installation all complete as per relevant drawings and technical

223 NDSR-136 specifications. Sqm ₹

Providing and fixing non-illuminated Photo-luminescent Safety

Way Guidance System (SWGS) Signages on rigid sheet with

Strong Self Adhesive and protective laminates, Life: 10 Years

and Weather Proof. The sign should be easily cleanable with a

dry cloth or with a cloth humidified with water, Self-

Extinguishing, and should not contain any radioactive

substances in toxic terms.

Photoluminescent

(Glow) Signages

GMRC 2026 Page 53 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Signs including all operations from printing, fixing graphics with

laminate, and installation all complete as per relevant drawings

specifications.

Providing and fixing non-illuminated Photo-luminescent Safety

System (SWGS) Signages on rigid sheet with Strong Self

Adhesive and protective

laminates, Life: 10 Years and Weather Proof. The sign should be

easily cleanable

with a dry cloth or with a cloth humidified with water, Self-

Extinguishing, and

should not contain any radioactive substances in toxic terms.

The product should be safe , Non Peelable, Non Scratchable,

Non Breakable, Silk

Screen Printed: high quality paint with UV resistance, As Per

PSPA Class - A / DIN

67510 Part 2 / 60 Minutes / > 700 mcdl with High photo-

luminescent luminous

intensity Certified By Government Of India Lab

For A Glow Period > 24 Hrs. DRDO & ARAI Certified for All

require QC test to

Confirm As per the IS 9457-2005 ,IS 12349 (To be approved by

Should be RED/ GREEN/ BLUE/ YELLOW with Graphics Symbol in

approved by GMRCL/ Engineer-in-charge.

226 NDSR-137.1 Exit direction and Emergency Exit signages - 150 x 400mm Nos ₹

227 NDSR-137.2 Escape arrow Path Marking Tape sign - 80mm thk RM ₹

GMRC 2026 Page 54 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

228 Additional Conduiting for Illuminated Signages

Providing conduit embedment or surface laying on the roof slab

/ wall/ structuresincluding supply of heavy duty GI conduit pipe

with minimum 20 micron thickgalvanizing along with all

required G.I conduit accessories like bends elbows,junction

229 NDSR-138 boxes square boxes etc. With specification as covered under

specialspecifications of electrical works .The conduit shall be

installed and GI fish wireshall be provided a pulling wire. The

conduit shall be provided as pulling wire,surface laying conduit

shall be used with spacer type saddle clamps with brassscrew.

32mm Dia - GI Conduit pipe for lighting and power circuits

230 NDSR-138.1 including conduit Rm ₹

25mm Dia - GI Conduit pipe for lighting and power circuits

231 NDSR-138.2 including conduit Rm ₹

accessories and all junction as required.

232 Additional Wiring for Illuminated Signages

GMRC 2026 Page 55 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

25mm Dia - GI Conduit pipe for lighting and power circuits

including conduit

accessories and all junction as required. Supply and wiring for

lighting/receptacle

in the existing conduit for Lighting Circuits / Single phase

sockets from DB to the

switch control box (SB) with P+N+E-copper FRLSZH 1.1 KV grade

cable to connect

all signages, LEDs, lights, switches, sockets etc. All wires shall be

terminated with

pin type lugs and provided with ferrules for identification

normally circuit mains

start from the DB, MCB and run up to the switch box/ MCB

Controlled lights up to

Single circuit consisting of 3 Run 2.5 sq.mm copper conductor

234 NDSR-139.1 FRL SZH ,1.1 KV Rm ₹

Double circuit consisting of 6 Run 2.5 sq.mm copper conductor

235 NDSR-139.2 FRLSZH 1.1 KV Rm ₹

Single circuit consisting of 2 Run 4.0 sqmm and 1x2.5 sq.mm

236 NDSR-139.3 copper conductor Rm ₹

FRL SZH ,1.1KV grade cable

Double circuit consisting of 4 Run 4.0 sq.mm and 2x2.5 sq.mm

237 NDSR-139.4 copper conductor Rm ₹

FRLSZH 1.1 KV grade cable

238 Spike for birds

GMRC 2026 Page 56 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and fixing spikes over suspended/post/projected

signage for birds

made with latest technology that do not harm bird but make

signage bird proof.

Spikes for birds made in 3 inch Uv stabilized polycarbonate

protecting it from the

sun's rays. That will not go brittle even in direct sunlight. It shall

temperature resistant tested from -20 °C to +150 °C. It shall be

effective against

239 NDSR-140 even the heaviest pigeon infestation. Bird spike shall be Rm ₹

designed to protect

broad and narrow ledges.

Maximum height shall be 3 Inch. Length shall be as per signage.

Cost to include fixing of spike on signage including all marking &

Locations approved by the Engineer-in charge.

240 NDSR-141 Installation of Low Height Ticket Counter Sqm ₹

241 NDSR-142 Installation of Drop off Signage Board Sqm ₹

Sr No SCHEDULE B.12:( Borewell items) Unit Rate

Supplying and Installation as Specified the following ,as per

242 NDSR-143 direction of engineer-in -charge,including all taxes and duties

Water type check valve 100mm dia of Odco,sant,kirloskar,

243 NDSR-143.1 Each ₹

leader or equivalent make conforming to PN-10

GMRC 2026 Page 57 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Pressure gauge with isolating valve of 10mm dia confirming to

244 NDSR-143.2 Each ₹

IS: 3624 of H-Guru, Dan-Fuss or equivalent make

Supply of submersible pump set with 4 HP, 3 phase, 440 volt,

Hz motor 10 stage pump suitable for 80 feet water level and

245 NDSR-143.3 discharge 1800 ltr/hr model no. CORA- 12C/') make - KSB.The Each ₹

rates are inclusive of all taxes and duties complete.

Supply erection of 2.5 sqmm submersible cable make- Finolex,

246 NDSR-144 CCI, skyone.The rates are inclusive of all taxes and duties Meter ₹

Lowering of pump submwersible pump into the existing bore as

247 NDSR-145 per direction of engineer-in-charge.The rates are inclusive of all Each Job ₹

taxes and duties complete.

Lifting of pump set from the existing bore as per direction of

248 NDSR-146 engineer-in-charge.The rates are inclusive of all taxes and duties Each Job ₹

Providing and fixing ISI mark 4 x 2.5 sqmm. Copper conductor

armoured cable. All work shall be carried out as per direction

249 NDSR-147 from Engineer-in-charge.The rates are inclusive of all taxes and RM ₹

duties complete.

Providing and fixing ISI mark 1' PVC conduit pipe. All work shall

250 NDSR-148 be carried out as per direction from Engineer-in-charge.The RM ₹

rates are inclusive of all taxes and duties complete.

Removal of water and existing filter materials from the

structures, Development and cleaning of bore Cleaning of

251 NDSR-149 material and putting back to the system as required and per Each ₹

direction of engineer-in -charge. The rates are inclusive of all

taxes and duties, Nothing shall be paid extra.

GMRC 2026 Page 58 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Miscellanecous civil works like cleaning of ground rain water

drain , meshes, minor repairing of drains, meshes, manhole

252 NDSR-150 covers etc. The rates are inclusive of all taxes and duties Each ₹

Cartage of equipment required for maintenance of Borewell as

253 NDSR-151 required as per direction of engineer-in-charge. The rate are Each job ₹

inclusive of all taxes and duties complete.

Sinking bore well of 150mm dia clear, using fast rig in all strata

including I Lot

overburden up to 20m, fixing of casing pipes, collars and cap

254 NDSR-152 cutting and threading Including transportation of rig and Lot ₹

supporting vehicle,

crew charges and cost of consumables etc. complete including

yield test at the

final depth with a minimum working of comeressor for one hour

255 NDSR-152.1 Up to 60 m depth @Rs. 200 perm

256 NDSR-152.2 Above 60m and up to 90m@ Rs. 220 perm

257 NDSR-152.3 Above 90m to 120m @ Rs. 250 per m

Supplying 150mm n.b MS 'C' class bore well casing pipe with

258 NDSR-153 collars

conforming to IS Standards

Supply, delivery, Installation, testing and commissioning of

vertical multistage submersible pump of Suitable Capacity (HP)

259 NDSR-154 and providing necessary piping and valves upto ground level Set ₹

GMRC 2026 Page 59 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

One set vertical multistage suitable submersible pump of

Phase 415 V, 50 Hz

AC, pump capable of pumping 600LPM against an approximate

110m from all causes, Including providing 4C x 4 Sqmm 440 V

flat core double

sheathed water proof submersible cable, Star Delta starter,

control panel with

dry run preventer, overload protection and backup protection

and capacitor as

required, installed Inside a weather proof kiosk with locking

260 NDSR-154.1 arrangement of

approved design near the bore well, including making necessary

connections from mains to the starter panel and from starter

Submersible pumps may be of Atlanta/ KS8 / Klrloskar / Calama

Note: The 4C x 4 Sqmm 440 V flat core double sheathed water

submersible cable shall be in scope of contractor as e_er site

Providing & fixing gun metal gate valve & non return valve of

261 NDSR-154.2 50mm nominal

bore on delivel\l_ side

Supply & Fixing 50mm n.b GI Pipe conforming to IS

262 NDSR-154.3 Specifications from bore

well pump up to ground level.

GMRC 2026 Page 60 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

lowering the pump & pipe assembly using tripod & chain pulley

block in a neat

workmanship manner with all necessary accessories for

263 NDSR-154.4 supporting the pump,

providing & fixing necessary bore well clamps on the delivery

pipe to securely

position & retain the pump & pipe in position etc., come_lete

Supply, delivery, installation, testing and commissioning of

vertical multistage

submerslble pump of suitable HP or nearest standard

manufacturing size and

264 NDSR-155 providing necessary piping and valves up to ground level Set ₹

suitable for 601pm at

25 mtr head complete with 4m delivery pipe, submersible

electrical cable, DOt.

starter, Level switch [Float sensor.

Providing, erecting approved make horizontal mono

submersible pump set I

having flow rate of 60 LPM and 25 m head with suitable motor

265 NDSR-156 Phase, 50 Hz, 415 volt+-10% with dual starter, cables of Set ₹

required size, GI

medium delivery pipes, specials, suction strainers etc. complete

manlfoldL control and measuring devices.

Sr No Sub-Schedule-B.13(Paver Block Work) Unit Rate

GMRC 2026 Page 61 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Providing and laying factory made chamfered edge Cement

Concrete paver blocks in footpath,

parks, lawns, drive ways or light traffic parking etc, of required

strength, thickness & size/

shape, made by table vibratory method using PU mould, laid in

required colour & pattern

over 50mm thick compacted bed of sand, compacting and

proper embedding/laying of inter

locking paver blocks into the sand bedding layer through

266 NDSR-157 vibratory compaction by using Sqm ₹

plate vibrator, filling the joints with sand and cutting of paver

blocks as per required size

and pattern, finishing and sweeping extra sand. complete all as

per direction of Engineer-in-

60mm thick cement concrete paver block of M-35 grade with

approved colour, design &

Taking out existing CC interlocking paver blocks from footpath/

central verge, including

removal of rubbish etc., disposal of unserviceable material to

267 NDSR-158 the dumping ground, for which Sqm ₹

payment shall be made separately and stacking of serviceable

material within 50 metre lead

as per direction of Engineer-in-Charge.

GMRC 2026 Page 62 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Laying old cement cocrete interlocking paver blocks of any

design/ shape laid in required

line, level, curvature, colour and pattern over and including

mm thick compacted bed of

268 NDSR-159 coarse sand, filling the joints with fine sand etc. all complete as Sqm ₹

per the direction of Engineerin-

charge. (Old CC paver blocks shall be supplied by the

department free of cost).

Sr No Sub-Schedule-B.14 (Paint Work) Unit Rate

Finishing with Deluxe Multi surface paint system for interiors

and exteriors using Primer as per manufacturers specifications :

269 NDSR-160 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and Sqm ₹

including one coat of Special primer applied @ 0.75 ltr /10 sqm

Finishing walls with Acrylic Smooth exterior paint of required

270 NDSR-161 shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) Sqm ₹

on existing cement paint surface

Painting with synthetic enamel paint of approved brand and

271 NDSR-162 manufacture of required colour to give an even shade : Sqm ₹

One or more coats on old work

Removing white or colour wash by scrapping and sand papering

272 NDSR-163 and preparing the surface smooth including necessary repairs to Sqm ₹

scratches etc. complete

GMRC 2026 Page 63 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Applying priming coats with primer of approved brand and

manufacture, having low VOC (Volatile Organic Compound )

273 NDSR-164 content. Sqm ₹

With water thinnable cement primer on wall surface having

VOC content less than 50 grams/litre

Total of Schedule-B

GMRC 2026 Page 64 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

Annexure – 2, DETAILS OF TAXES AND DUTIES (Tax Bifurcation) INR: Indian Rupees

GST (Goods and Services Tax)

Customs Duty Total

CGST SGST IGST Any other Tax Amount of

t on t on Amount Amount

Amou Amount on Amoun Amoun

which Rate which Rate Amount Rate on which Rate Amount on which Rate (6) = sum

nt which tax/ t t

tax/ (%) tax/ (%) (INR) (%) tax/ duty (%) (INR) tax/ duty (%) of (1) to

(INR) duty levied (INR) (INR)

duty duty levied levied (5)

al Note :1 Contractor at any point of time shall be bound to share the details pertaining to the Input Tax Credit availed or to be availed along with the supporting documents.

Note:2 In the Tax Schedule Contractor shall require to furnish component wise tax details.

Note:4 GST TDS will be deducted from the invoice considering the prevailing rates

Note 5 : It shall be sole responsibility of Contractor to pass all the accrue or to be accrued Input tax credit to GMRC as per Section 171 of CGST Act.

GMRC 2026 Page 65 of

Tender No: GMRC/CIVIL MAINTENANCE/WR/PH-1/2026 BOQ

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer C15 & C26 of ITT)

1The following are the particulars of minor deviations from the requirements of the Tender Document:

Sr. No Clause Deviations Price adjustment for each

1 The Tenderer shall indicate price adjustment against each deviation in Annexure 13A of BOQ. This price is the price

which the tenderer shall reduced from this tender price if deviation(s) is/are accepted by the Employer.

2 Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No

Deviations’.In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the

tenderer has not proposed any deviations from tender documents.

3 If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender,

other than in this Annexure, it will have no effect.

Signature of authorized signatory on behalf of tenderers

GMRC 2026 Page 66 of