SPECIAL REPAIR TO BLDG NO. T-6 (CAMP 22/2) UNDER AGE B/R-II AT GE CLEMENT TOWN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.16 Sqm (400x400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x250x7/300x450x7mm thick set and jointed in neat cement slurry including & over 10 mm thick 1:4 cement mortar plaster and pointed in coloured cement to match complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, ridge etc fixed with self tapping screws including Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed

M&L for Providing cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified and directed by Engr-in-Charge

M&L for 75mm thick PCC 1:3:6 type C2 (Using 20mm graded stone aggregate) as in plinth protection/path/hardstanding laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound including demolition of PCC all as specified and directed

M&L rubber moulded factory made machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness , M-40 grade set, jointed and pointed in neat cement slurry in floors with grey cement & pigments including 30mm sand cushioning for laying of inter locking tiles all as specified and directed.

M&L Cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, , copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as complete all as specified and directed

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles with and including over 10mm thick rendering in CM (1:4) including Dismantling of tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for GI snap grid framework including 4mm thick Designer oceanic boards (Non asbestos) for false ceiling (grid size 605mm x 605mm ) including necessary notching and preparing holes and hangers 2mm dia GI adjusting level fixed to structural members. Galvanised steel section of exposes T section grid with exposed flange faces duly powder coated white/ivory colour. The suspension system consisting of perimeter wall angle of size 20x20x0.45mm of GS sheet to secured on wall/partition face with the help of rawl plug screws @450mm c/c. Universal T shaped main runner with single rotatary stiching of size 35x24mm made from 0.33mm thick GS sheet of length 3.60m to be spaced @1200mm c/c. Cross T shaped runner of size 25x24mm with double thick GS sheet 0.25mm thick spaced @ 600mm c/c. To form 600x600mm size module, intermediate T shaped cross runner of size 25x24mm made from 0.25mm thick GS sheet of length 600mm is placed inside the module of size 1200x600mm including suspension of the ceiling frame from structural members with 2mm thick GI wire and level adjusters all cut out etc to the required line and shape as per manufacturer recommendations complete all as specified and directed.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed

M&L for applying one coat of 3mm thick wall care putty on wall complete all as specified and directed.

M&L for applying two coat of internal acrylic distemper of approved tint on walls after complete removal of existing treatment and preparation of old plastered surface by rubbing down, washing complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as directed

M&L for complete removal of old surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm as directed

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and making good distrubed portion to match existing surface complete all as specified and directed

S&F framed work as in doors or gates of angle or other section, hollow section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' inlcuding dismantling of wrought iron complete all as specified.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed

S&F stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed to steel window or wooden window inc welding flat iron with tinned tacks or galvanized wire staples complete all as specifed and directed

M&L for preparing new steel and iron surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed

S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement to waste pipe in run lead with dia of outlet 75mm complete all as directed

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved solvent/adhesive and fixed to floor/wall or laid in trenches including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,complete all as specified and directed

S&F in repair PVC (SWR) bend 75mm dia , any radius as required and jointed with approved adhesive complete all as specified and directed

S&F in repair Bib taps cast copper alloy with handle, chromium plated fancy type, with wall flange screwed down, suitable for 15 mm bore pipe,complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified.

S&F as in repair stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified.

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including brackets including cutting for and pinning in brackets but including waste pipe complete all as specified

S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified

S&F in repair triple layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with complete all as specified and directed

S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed

S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including Taking up or down 15mm dia steel tubing and connections complete all as specified and directed

S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including Taking up or down 20mm dia steel tubing and connections complete all as specified and directed

M&L green marble 12-14 mm thick (table rubbed and polished ) in step, jambs, pillers , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe over 15mm thick screed bed in CM 1:6 including dismantling of stone slab complete all as specified and directed

S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified.

S&F Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified .

S&F in repair 20mm bore gun metel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

M & L for providing reinforced cement concrete (Nominal Mix), type B-1 1:2:4 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels, chajja, shelves , slab inlcuding necessary formwork including Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed by Engr-in-Charge

Disconnecting the electrification and taking down DBs (any type of SPN/TPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by EIC. Note - Temporary power supply shall be provided by contractor.

Taking down U/S submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

M&L for sub-main wiring (concealed) with two single core 6 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 20 mm dia non-metallic PVC conduit fixed in wall including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

Material & Labour for following type Point Wiring controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit MMS ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates).

One light point controlled by one switch.

One ceiling fan point controlled by one switch.

One exhaust fan pointcontrolled by one switch.

One 3 pin socket outlet 5 Amps on the same board.

One 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 54 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by EIC.

S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed.

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete including fixing of 9/10 watt LED bulb all as specified.

Supply and fixing step socket type modular fan regulator 120/280 V , 100Watt all as specified and as directed.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 100 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 4 way with 100 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCBs SPN 25-32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCB SP, 5-32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCBs SP 40 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S&F Oval shape Bulk head Edge -lit LED fitting comprising with high brightness LED 10 WATT,IP-67 protection all as directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 volts, 50 Hz, 1200 RPM, copper winding of sweep 250 mm complete all as specified and directed.

Taking down unserviceable Ceiling fan ,dismantling blades and removing fan & blades and deposited to MES E/M Store yard

S& F Ceiling fan complete with copper winding ,blades ,down rodss,electronic regulastor and accessories 230 v0lt,1200mm sweep,min delivery 210 CFM wuth service value 6.00 BEE. Five star rated with BLDC

M & L for Earthing complete with galvanised steel pipe electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed by EIC.

M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking out of unserviceable cable of any size /type from trench

Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 50 x 3.5 Core and testing complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

M & L for 50mm bore GI pipe (Light grade) laid under road or fixed with pole/wall of culvert as in protection of UG cable incl necessary MS clamp and complete all as specified and directed.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V ,10-60 Amp,accuracy class -150 Hz ,conforming to IS 13799,ip-54,with parameters to show data ,time ,current reading, load,PF ,voltage and kwh .

S& F Distribution Board ,TP &N , 4 Way,Vertical type Double door for Incomer MCCB & Outgoing MCBs 12 no,IP 42 Protection.(MCCB, MCBs will be paid separately).

S&F,MCCB,415 volt,16 KA ,4 Pole,125 A

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

JBN CONSTRUCTION (BID ID -3362834)

MAHTAB ALAM (BID ID -3363646)

SWASTIKA BUILDERS (BID ID -3363477)

ABHINAV KUMAR (BID ID -3360205)

RADHA ENTERPRISES (BID ID -3357036)

trinity construction (BID ID -3361819)