8978 REPAIR, MAINT OF LT DISTRIBUTION SYSTEM AND LT CABLE, INTERNAL WIRING AND FITTINGS TO BLDGS, SECURITY STREET LIGHTS, GATE LIGHT, DG SETS AND OTHER CONNECTED MISC WORKS AT RTS AND DEPOT HEMPUR UNDER GE(EAST) BAREILLY.

Amount

Dismantling cross arms of MS channel or angle section, MS clamps etc compelte all as specified and directed.

Dismantling insulators of any type, any size carefully and keeping at site for re-use etc complete all as specified and directed.

Dismantling stay assembly including demolition PCC and earth work compelte all as specified and directed.

Dismantling of ACSR conductors of any type and size complete all as specified and directed.

Dismantling earth wire of any type and size complete all as specified and directed.

M&L for pin type porcelaine, vitreous,brown insulator including one galvanised mild steel spindle,two galvanised iron washers and galvanised iron nut, 50 mm height,65 mmdia for 550 Volts grade completed and directed.

Supply and fixing shackle type insulator, porcelain, white brown, or green insulator of size 100x115mm (Height 100 mm and 115 mm dia) with section strip 31/5 mm and 14 mm bolt complete all as specified and directed by the Engineer-in-Charge..

M&L for pin type composite insulation/silicon rubber material including one galvanishing MS spingle, nuts & washers of 150mm height, 150 mm dia for 11000 volt grade and fixing to the pole/structure and binding of conductor including taking down complete all as specified and directed.

M&L for disc type composite long rod insulator HT 11 KV out door type with composite insulating/silicon rubber materials type along with necessary acessories for connection of cables/ACSR conductors including taking down and making of cycle point complete, all as specified and directed.

M&L for servicing and greasing GOD (gang operated air break switch) 200 Amps triple pole 11 KV including replacement of the following U/S parts :- (a) ACSR Jumper with RYB, PVC sleaves 1.5 m to 2.0 m long – 03 Nos (b) Brass connector brackets with bolts, nuts etc - 3 sets (c) Copper lugs of suitable size

M & L for taking down HT 11 KV grade tripple pole gange operated Air break switch from 4 pole/2 pole structure and S & F New gang operated Air break switch (GOD) HT 11 KV of 200 A capacity out door type suitable for vertical mounting fixed type complete with 3 no. silicon rubber polymeric insulator per phase all as specified and directed.

S&F stay assembly set comprising of stay bow, galvanised 16mm dia 400mm long stay rod 16 mm dia GI stay bow, 1800 mm long with nuts, bolts, washers, MS stay plate, 02 Nos thimble and clamp etc required with all accessories as specified Note :- Loop type insulators, excavation, earth work, concrete for foundation shall be measured and paid separately under respective item of Sch 'A'. PCC shall be measured and paid separately) compelte all as specified and directed.

S&F loop type insulator large size with over all dimension 90x140 mm clearance of hole 25.5 compelte all as specified and directed

M&L for galvanised steel standard stay wire of size 3.15mm ( 70 Kg/Sqmm) grade for stay of poles including necesssary clamps of 50x6mm of flat iron complete all as specified in electtri 300x300x6 mm MS stay plate including thimbles, GI stay wire 7/2.24 mm SWG of required with all accessories as specified and directed.

M&L aluminium conductor steel reinforcd (ACSR) of any size for LT over head conductor on poles including stringing, tightening binding to insulators with aluminium wire making and connecting commissioning and testing compelte all as specified and directed.

M&L for 7 SWG GI continuous earth wire of size 3.15 mm or 4.00 dia for cradles, gurading and earth continuity on LT OH pole including suitable, binding wires etc complete all as specified and directed.

M&L for pre-fabricated MS structural steel (IS marked) work consisting of channels / angles / other sections etc of various sizes and shape, cut / weld / drilled holes etc hot / cold in position for cross arms with FI clamps (full, half D and earth clamp etc) incl necessary MS bolts, nuts etc and painting, all as specified and directed.

M&L for opening the binding wire from pin/shackle insulator on steel pole of any height for re-stretching the ACSR conductor, after re-stretching without kinks & bends, binding the pin/shackle insulator with appropriate size of aluminium binding wire, etc complete all as specified and directed. NOTE :- (i) The above work includes clearing/ prooning of tree branches faling around the conductors. (ii) Cost of binding wire deemed to be included in the quoted rate, No extra amount will be paid.

M&L for preparation of old painted steel surfaces of LT/HT steel tubular/swaged/rail poles of 9m to 11m long including brackets, clamps, channels and cross arms by cleaning of oils, lubricants, grease etc. complete above PCC coping and applying two coats of aluminium paint on surfaces 1m above PCC coping, applying two coats of synthetic enamel paint in zebra pattern with Aluminium and red colour combination up to 1m height above PCC coping; writing MES No. of poles (Number size shall be 25mm and lettering shall be 40mm) complete including applying two coats of white wash on exposed concrete surfaces of coping to poles duly preparing the surfaces all as directed.

Trimming of tree branches along the LT overhead line up to 1.5 mtr from OH line to tree around the parameter, unit area complete all as specified and directed. Note:-Span shall be considered the distance between pole to pole.

M&L for MCCB 4 pole, 415 volts, adjustable type, 160 Amps with breaking capacity 36 KA compelte all as specified and directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 200 Amps with breaking capacity 36 KA compelte all as specified and directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 250 Amps with breaking capacity 36 KA compelte all as specified and directed.

M&L for MCCB 4 pole, 415 volts, adjustable type, 630 Amps with breaking capacity 50 KA compelte all as specified and directed.

M&L for steel tubular poles complete with cast iron base plate, final taper plug, bolt, nuts and screws as specified type 410 SP-31(9 mtr long). Including painting pole with two coats of bituminous paint internally and external embedded portion in ground concrete and painting exposed surface with two coats of aluminum paint over one coats of aluminum paint over one coat of red oxide primer including taking down of existing LT pole of any size and re-fixing of chaneel, insulator and electric connection etc, complete all as specified and directed.

M&L for steel tubular poles complete with cast iron base plate, final taper plug, bolt, nuts and screws as specified type 410 SP-55(11mtr long). Including painting pole with two coats of bituminous paint internally and external embedded portion in ground concrete and painting exposed surface with two coats of aluminum paint over one coats of aluminum paint over one coat of red oxide primer including taking down of existing LT pole of any size and re-fixing of chaneel, insulator and electric connection etc, complete all as specified and directed.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/path/drains/along wall/floor/pole/equipment etc. cross sectional area including cable lugs of following size including taking down of existing cable complete all as specified and directed.

(a) LT cable 2 Core 16 Sqmm

(b) LT cable 4 core 16 Sqmm

(c) LT cable 3.5 core 25 Sqmm

(d) LT cable 3.5 core 35 Sqmm

(e) LT cable 3.5 core 50 Sqmm

(f) LT cable 3.5 core 70 Sqmm

(g) LT cable 3.5 core 120 Sqmm

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, laying of pipe etc and not exceeding 10 sqm on plan for manhole etc and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.5 mtr in depth for foundation, laying of pipe etc and not exceeding 10 sqm on plan for manhole etc and getting out in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed.

Removing excavated material (soils) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying dry burnt bricks, sub class ‘B’ old size in cable trenches, as cable protection complete all as specified and directed.

M&L for dry sand cushioning to under ground electric cable on layer of 08 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of M.E.S Schedule Part-I complete all as specified and directed.

Cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.

Supply and laying galvanised iron pipe 50mm bore light grade fixed to poles with steel clamps laid under road crossing, fixed to wall etc complete all as specified and directed by Engr-in-charge.

Material and labour for P.C.C (1:3:6) type C-2 using 40 mm graded aggregate as in foundation of pole and filling of mass concrete including providing necessary form work complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping to poles including necessary form work and applying three coats of white wash over the surfaces of coping including demolition of existing disturbed coping and removing the debris to a distance n.exc. 50m complete all as specified and as directed.

Taking down carefully copper /aluminum point wiring including light fittings and switchs and sockets of any type and removing materials from site a making good disturbed surface of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing DB and main switch with MCBs etc of any type and capacity at site and making good the disturbed surface of walls, floors filling up of holes, plastering white washing distempering etc matching to the existing etc complete all as specified and directed.

Taking down old defective sub main wiring of any type complete all as specified and directed.

M&L for Point wiring complete with and including 1.5 sq. mm (nominal area) single core multi stranded FRLS copper conductor PVC insulated unsheathed cable 1100 volts grade I S I marked drawn through in and including concealed non metalic rigid PVC conduit 20 mm dia with accessories such as bend ,tees, junction boxes etc. anoised steel terminal boxes for mounting fittings like switches, sockets and fan regulators etc with 3 mm thick laminated sheet covers fixed with brass screws and /cup washer including one run of 1.5 Sqmm PVC insulated and unsheathed multi strand copper conductor as green colour earth wire and connected to common earth dolly complete all as specified and directed for the following:-

(a) one light/fan point controlled by one switch

(b) one 3 pin socket outlet 5A on independent board

(c) one 3 pin socket outlet 5A only on same board.

(d) one bell point controlled by one, one way push button on the same board with other switches or independent with cables 1.5 sq mm size.

(e) one light point controlled by two 2-way switches with cables 1.5 sq mm size.

All as per item 41 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded ( multistrand ) copper conductor cable for 3/6 pin socket outlet 15 amp on one independent board.

S&F Switch piano flush type single pole one way 5 Amps all as specified and directed.

S&F Switch piano flush type single pole one way 15 Amps all as specified and directed.

S&F Switch piano flush type single pole two way 5/15 Amps all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amp piano flush type all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed .

S&F bell push ,Flush type, single pole 5 Amps all as specified and directed.

S&F bell ,Buzzer, ding dong, AC 230 volts, single pole all as specified and directed.

S&F ceiling rose PVC / polycorbonate isolated body 3 terminals with base plate ISI marked all as specified and directed..

S&F Electronic fan regulator step type flush type suitable for fan 48'' /56'' mm sweep on existing phenolic laminated sheet etc as required make bajaj/orient/Cromton/Usha ISI marked all as specified and directed.

M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F MCB DB TPN 4 way 415V double door all as specified and directed.

S&F MCB DB SPN 4 way 240V with 200 amps rated bus bar double door all as specified and directed

S&F MCB DB SPN 8 way 240V with 200 amps rated bus bar double door all as specified and directed

Supply & fixing MCB Three Pole and Neutral (TPN) of capacity 100 Amps, 415 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric)

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 40 Amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric)

Supply & fixing MCB Single Pole (SP) of capacity 6 to 40 amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge. (Make : Legrand , schneider Electric)

S & F Sub main wiring with PVC Insulated FRLS cable 2 single core 1.5 sq mm 1100 V grade with stranded copper conductor and incl rigid PVC conduit concealed in wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC Insulated FRLS copper conductor single core 1.5 sq mm for earth continuity all as directed. (for Horse Padack purpose)

S & F Sub main wiring with PVC Insulated FRLS cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor and incl rigid PVC conduit concealed in wall / roof/ceiling (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC Insulated FRLS copper conductor single core 2.5 sq mm for earth continuity all as directed. Note : 2 RM length single core PVC Insulated FRLS multistraded copper conductor (FRLS) cable conduit and one length of earth cable shall be measured and paid for one length

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories concealed and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including modular metal flush box concealed in walls, with modular white cover plate with frame top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: -

(a) One light/Fan point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on same board.

(c) One 3 pin switch socket outlet point 5 Amps on independent board

All as per item sl No 61 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

Supply and fix switch modular type single pole one way 6 amp.

Supply and fix switch modular type single pole one way 16 amp.

Supply and fix modular socket outlet 6A, 2/3 pin combined 2 module completed all as specified and directed

Supply and fix modular socket outlet 6A/16A, 2/3 pin combined 2 module completed all as specified and directed

67. single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed.

Supply and fix modular bell push type single pole one way 6 amp.

Supply and fixing LED light fitting 1x20 watt, 220 volts AC decorative box type with driver, holder including LED tube linght connecting up with three core flexible copper conductor cable suitable size from ceiing rose and taking down existing unserviceable luminaire complete all as specified and directed .

Supply and fixing LED light fitting 1x9W/1x10W bulk head luminaries including LED light diiver holder connecting up with three core flexible copper conductor cable suitable size complete all as specified and directed. Make: Crompton/Havells/ Philips/Bajaj/C&S

Supply and fixing LED light fitting 2 feet , 10 watt 220 Volts AC decorative type with driver holder connecting up with three core flexible copper conductor cable suitable size and taking down existing unserviceable luminaire complete all as specified and directed .

Supply and fixing of LED building security light fitting Luminare of 25 Watt made up pressure die cast housing with toughened glass and high power with option of secondary optic with IP 65 protection complete with 1.5 meter GI tube and fixing clamps and 3 core copper cable complete all as specified and directed . Cat no. LSTS-25-CDL-M of crompton or equivalent in Philips/Bajaj

Supply and fixing of round shape 12 watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roofceilling including connecting up with flexible copper conductor cable of suitable size from ceiling rose to fitting and taking down existing unserviceable luminaire complete all as specified and directed . Make: Crompton/Havells/C&S/ Bajaj/ Philips

74. Supply and fixing of LED Floodlight 120 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection along with mounting bracket fixing for LT pole or on Wall including necessary arrangment of cable from floodlight to pole and removing the old defective light fitting complete ,all as specified and directed.. Make: LFLN-120-CDL/60-M of Crompton or equivalent in Wipro / Philips/Bajaj

Supply and fixing of LED Floodlight 135 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection along with mounting bracket fixing for LT pole or on Wall including necessary arrangment of cable from floodlight to pole and removing the old defective light fitting complete ,all as specified and directed. Make: LFLN-135-CDL/60-M of Crompton or equivalent in Wipro / Philips/Bajaj

Supply and fixing of LED 45 watt, decorative indirect post top, for garden landscape lighting with IP65 protection, resistant to impact and corrosion anti glare and uniform distribution and necessary modification of existing GI pole including taking down existing unserviceable post top light fittings complete all as specified and as directed by Engr-in-Charge. Make : Crompton Cat No LPTOI-45-CDL or equivalent .to Havells/Bajaj/Philips

Supply and fixing of unique modular LED Floodlight 250 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection along with mounting bracket fixing for LT pole/wall/gate including necessary arrangment of cable from floodlight to pole/wall/gate and removing the old defective light fitting complete, all as specified and directed... Make: LFLPI-250-CDL/60-M of Crompton or equivalent in Wipro / Philips/Bajaj

Supply and fixing of LED street light 72 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection and provision of bracket for fixing of street light fittings bend to shape, made out of bracket suitable size GI pipe light grade upto 1.50m long fixed including MS clamps of size 40 x 4 mm, bolt, nuts & washer to fix with LT pole/Wall with two coats of aluminium paint over a coat of red oxide primer including taking down existing unserviceable LED street light fittings complete all as specified and as directed by Engr-in-Charge Make: CG Cat No. LSTP-72-CDL-M or equivalent in Bajaj/Philips/wipro

Supply and fixing of LED street light 60 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection and provision of bracket for fixing of street light fittings bend to shape, made out of bracket suitable size GI pipe light grade upto 1.50m long fixed including MS clamps of size 40 x 4 mm, bolt, nuts & washer to fix with LT pole/Wall with two coats of aluminium paint over a coat of red oxide primer including taking down existing unserviceable LED street light fittings complete all as specified and as directed by Engr-in-Charge Make: CG Cat No. LSTP-60-CDL-M or equivalent in Bajaj/Philips/wipro

Supply and fixing of LED street light 45 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP65 protection and provision of bracket for fixing of street light fittings bend to shape, made out of bracket suitable size GI pipe light grade upto 1.50m long fixed including MS clamps of size 40 x 4 mm, bolt, nuts & washer to fix with LT pole/Wall with two coats of aluminium paint over a coat of red oxide primer including taking down existing unserviceable LED street light fittings complete all as specified and as directed by Engr-in-Charge Make: CG Cat No. LSTS-45-CDL-M or equivalent in Bajaj/Philips/wipro

Supply and fixing of LED street light 40 Watt, 220V 50Hz made up pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP65 protection including necessary arrangment of cable from street light to pole and removing the old defective light fitting complete, all as specified and directed. Make: CG Cat No. LSTS-40-CDL-M or equivalent in Bajaj/Philips/wipro

Repairs/replacement of solar street light by dismantling panel, battery, PVC battery box, PVC wire LED light etc complete all as specified and directed.

Supply only for PVC Battery box complete all as specified and directed-

Supply only for solar LED light 12 Watt complete all as specified and directed

Supply only for solar panel 50 watt complete all as specified and directed.

Supply only for solar charger controller panel complete all as specified and directed.

Supply only for battery 12 volt 40 AH fully complete all as specified and directed.

Supply and fixing LED out door divices 45 Watt, 220V 50Hz , complete all as specified and directed.

M&L for carrying out general servicing and repairs to Engine of DG set of the following capacity installed at varouse pump house at RTC & Depot Hempur including servicing of water pump, replacement of unserviceable spares, carrying out 'B' Check as per manufacturer's recommendations including replacement of oil filters, fuel/diesel filters with 'O' rings, Turbo fileter, super bypass filter and Engine Oil and toping up of coolant up to required level complete all as specified and as directted. Notes : (i) Supply only Engine Oil and coolant shall be measured and paid separetely. (ii) Rate quoted is inclusive of Oil filters, diesel filters with O rings, hose pipe and diesel pipe with clamps and turbo filter.. (iii) All the spares require replacement during servicing shall be measured and paid separately as 'Supply only' (iv) Servicing of Radiator & self starter shall be measured and paid separately

(a) 125 KVA DG set

(b) 63 KVA DG set

(c ) 40 KVA DG Set

(d) 30 KVA DG Set

(e) 25 KVA DG Set

Supply only Air cleaner/filter of existing size suitable for 125 KVA DG Set .

Supply only Engine oil 15W-40 or as per manufacturer's recommendation.

Supply only Radiator Coolant

M&L for Cleaning and servicing of radiator assembly including cooler of the capacity DG Set upto 125 KVA by circulating de-scaling solution including repairs and replacement of worn out rubber hoses with clamps, mounting boots and bolts, recrification of leakages by welding/ brazing etc. complete all as directed.

M & L for supply and fixing against repairs Automatic Voltage Regulator (AVR) suitable for uptp 125 KVA, connecting with panel circuit, starting and testing on load all as specified and directed by Engineer-in-charge

Supply and replacement lead acid battery 12 V 150Ah complete (Initially charged) and connected to DG sets complete all as directed [Make: Exide/ SF/ Amaron]

Earthing complete with galvanised steel earth plate electrode 60cmx60cm.x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point, 20 mm bore medium grade GI watering pipe, 15mm bore light grade GI protection pipe, PCC chamber with RCC cover, funnel with wire mesh etc including necessary test on completion all as specified and as directed. Note :- (a) Earth strip / Earth lead beyond 7.5m shall be measured and paid separately. (b) Cost of 15mm and 20mm bore GI pipe is deemed to be included in quoted rates.

prabhave traders

LEEJA ENTERPRISES

N S ELECTRICALS

K.S.Traders

M/S BABA ENTERPRISES