GENERAL-Cherukulam Bund 2025-Urgent Repair works to Cherukulam Bund across Poonoor Puzha in Kakkodi Panchayath, Elathur LAC Kozhikode Dt.-General Civil Work

Amount

Repair to Mechanical Shutter

60.1.1:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

60.2.6:BAILING OUT WATER USING PUMP ABOVE 30HP AND UP TO 40HP - Bailing out water with engine and pump set above 30HP and up to 40HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

60.8:Shutter for check dams- Supplying and providing Thambagam wood shutter planks 5cm thick including cost of materials and labour charges etc complete

14.61:Painting (one or more coats) with black japan paint of approved brand and manufacturing to given an even shade.

OD39474/2024-2025:Cost of supplying and stacking 16 mm tested galvanised steel wire rope having breaking capacity of 16721 kg, tensile designation of 1770 kg/sq. cm confirming to IS 2266 - 2002.

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD39507/2024-2025:Lifting the mechanical shutter from the VCB inside, dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead and then replacing with new one.

Bidder Name

devanand