Loading…
Loading…
Tender Value
₹2.5 L
EMD Value
₹6,143
Closing Date
12 May 2025, 10:00 amClosed
Assistant Engineer
LID EW Section, Pattambi Municipality
ANNUAL PLAN PATTAMBI MNPLTY 2024 25 CONSTRUCTION OF BOREWELL IN DIVISION 27 PR NO 342/25
2025_LSGD_763059_11
01/AE/LSGD/PTB/MPTY/2025-26
Open Tender
Civil Works - Others
Item Rate
180 days
Pattambi Municipality
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹6,143
Yes
26 Jul 2025
5 May 2025
13 May 2025
5 May 2025
12 May 2025
5 May 2025
Amount
Bore well
OD400700/2024-2025:Site Investigation Charges
OD400702/2024-2025:Digging Bore well of 150 mm dia including all charges
OD400703/2024-2025:Supplying and fixing 180mm dia casing pipe of 6kg/cm2 including all charges
OD400705/2024-2025:Supplying and fixing 180mm dia PVC End Cap including all charges
OD400707/2024-2025:Conducting yield test to ascertain the yield of tube well by ground water department including all charges complete
OD400720/2024-2025: Supplying and fixing 50mm GI elbow including all charges
OD400721/2024-2025: Supplying and fixing 50mm GI coupling including all charges
OD515134/2024-2025:Engaging Coolie
PUMP HOUSE
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD513816/2024-2025:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site. From data 60.7.1
4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
10.5.2:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
MVG (BID ID -2208723)
Bidder Name
Hamza
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1242861.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .