REPAIR / REPLACEMENT OF SANITARY / PLUMBING / FLOORING / PLASTERING, JOINERY AND THEIR CONNECTED ITEMS IN OMQ AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

M&L for repairs to CP/Brass bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer including refixing and replacement of CP face etc all as including making good the existing surface etc complete all as specified and directed to stop the leakage ang making the same functional.

M&L for repairs to bib taps / pillar taps / stop cock / angle valves / concealed stop cock / wall mixer / basin mixer of any description for stopping leakage of water by replacement of brass spindle heavy quality, complete all as specified and directed.

S&F in repair 15 mm size angle cock, cast copper alloy, chromium plated, fancy type with capstan head, concealed type, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm size bib cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm size bib cock long body type cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 75 mm size with arms 15 mm inlet complete all as specified and directed.

S & F in repairs 15 mm size pillar taps, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe with 450mm long flexible connector and fixed complete all as specified and directed.

S&F in repair 15mm bore Wall mixer 3 in 1 system with provision for both telephonic shower & overhead shower system complete all as specified and directed.

S&F in repair white vitreous china wash hand basin of size 580 x 440 mm, fixed over & including MS brackets comprising of the following items :- (a) Waste fitting 32 mm dia brass chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) PVC waste pipe 32 mm dia 750 mm long complete.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete all as specified and directed.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580x450 mm white with integral foot rests with cast iron ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed. Make : Jaquar, Perryware, hindware

S & F in repairs two piece wall hung / floor mounted EWC with cistern size 65.5x36.5x75.5cm including custom made seat cover and twin flush fitting complete all as specified and directed. Make: Cera Campbell Cat No: 2099 or equivalent series in KOHLER/Jaquar

S & F in repairs two piece wall hung / floor mounted twin flush internal cistern fitting of flush tank syphon kit along with toilet fill valve flush valve flapper and washer complete all as specified and directed. Make: Cat No: 8181010103 clair or equivalent series in KOHLER/Jaquar

Supply and fix in repairs 10 litre capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float, handle & flush pipe, fixed in position and connecting complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495x420 mm, with bowl size 405x355x178 mm, including waste assembly, PVC flexible waste pipe complete all as specified and directed.

S&F in repair stainless steel sink with draining board for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete including waste coupling, waste pipe complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and n.exc 500 ltrs and removing to store

Dismantling water tanks of capacity exc 500 and n.exc 1000 ltrs and removing to store

Supply and fix in repair 500 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

Supply and fix in repair 1000 litres capacity, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with 25mm dia GI tank nipple of for inlet, outlet, washout and overflow etc complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete all as specified and directed.

Supply & fix in repair Nipple suitable for HDPE water tank (Minimum weight of 25mm- 65gms) inlet /outlet suitable for 25 mm bore pipe complete all as specified and directed.

S&F in repair Health Fauset (Hand shower) with 8mm dia 1 metre long easy flex tube and in chorme finish & wall hook complete all as specified and directed. Make: Prayag Cat No. 451 or equivalent makes mentioned in Appx 'B' to CA.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete all as specified and directed.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and directed.

S&F in repairs plastic sheet covers for water closet, black, closed pattern with flat bottom with mild steel chromium plated or alluminised hinging device complete all as specified and directed.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Chromium plated corner glass shelf size 12 inch with bracket complete all as specified and directed. Make:- Prayag

S & F in repair PTMT alloy bathroom mirror cabinet size 500x400 mm wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 24" x 10" deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed.

S&F in repair Waste pipe of PVC 31/32 mm x 800mm long complete all as specified and directed. Make: Prayag Cat No 3272

S&F in repairs water tank covers for 500/1000 ltrs capacity tank complete all as specified and directed.

Taking down CPVC water tubing and connection 20mm dia bore and removal from site.

Taking down CPVC water tubing and connection 25mm dia bore and removal from site.

Supply and fix 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on wall concelled or exposed / ceiling or laying in floors complete all as specified and directed. Note:- Cutting chease wherever required will be measured & paid separately.

Supply and fix 25 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, fixed on wall concelled or exposed /ceiling or laying in floors complete all as specified and directed. Note:- Cutting chease wherever required will be measured & paid separately.

M&L for cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement , fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length, with rubber ring joints jointed with solvent cement, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F in repair cast iron floor trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repair cast iron nahani trap 100 mm dia of outlet, including jointing to waste pipe, fixed in cement concrete (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

S&F in repair SS Grating of size 150 mm x 150 mm fixed with white or grey cement complete all as specified.

S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2, fixed as in spout pipe and making good disturbed surface in CM 1:3 complete all as specified and directed.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelling course complete all as specified and directed.

M&L for Non - skid joint free coloured Ceramic tiles (1st quality) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles thickness not less than 7mm size of tiles 450mmx300mm as in skirting / dado etc laid jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over & including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for light shed vitrified coloured tiles not less than 10 mm thick of size 600x600mm in floors/skirting etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the tiles over and including 15 mm thick screed be in CM 1:6 complete all as specified and directed.

Dismantling of granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.

M&L for Granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of Granite stone slabs edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below or above ground level, including removal of debries outside MOD land complete all as specified and directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) complete all as specified and directed .

M&L for 5 mm thick rendering in cement mortar 1:4 (as second coat), over and including 10 mm thick rendering in cement mortar 1:6 (as first coat) on stone / PCC block masonry wall surface, including mixing liquid water proofing compound in second layer only as per manufacturers instructions, finished the surface even & smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls & applying two coat of distemper oil emulsion over a coat of primer over and including cement base wall cair Putty on wall surfaces complete all as specified and directed.

M&L for preparation of pastered surface of wall and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Cleaning of HDPE service water tank of capacity exc 250 litre & up to 500 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed.

M&L for cleaning of HDPE service water tank of capacity exc 500 litre & up to 1000 litre and connected circulating pipes at any position by removing sludge, mud, moss, moulds, efflorescent salts, oil spots etc or any other foreign material from the bottom, cover and internal surfaces by scraping using wire brush, draining out the water from the tank and washing internally with water & bleaching powder (0.10 Kg of bleaching powder will be mix in 1 litre water) and again draining out the water from the tank and writing the date of cleaning with white synthetic enamel paint on black background with synthetic enamel paint complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each

Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed.

S&F IInd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick IInd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

S & F 30mm thick IInd class HW Glazed and skeleton windows, ventilators, etc are provided with stiles and rails as specified in SSR Part I section 8 clause 8.24 (b) complete all as specified and directed.

S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long as per specification complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm to wooden/ iron/ aluminium frame with wooden/iron/ aluminium beading and fixed with nails/ nut & bolts or wire staples complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/rubber beeding and screw in Sqm n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick figured glass pin head type glazing with oil putty n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.

Welding in repairs over metal/steel surfaces of any thickness exc 2.5 cm & n exc 5 cm in length complete all as specified and directed.

M & L for 100mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

M & L for 75mm long Butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repair 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair for mild steel butt hinges medium grade 100 mm size complete all as specified and directed.

S & F in repair for mild steel butt hinges, medium grade 75mm size complete all as specified and directed.

S & F in repair 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repair 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repair 25 mm dia Curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed.

Dismantling and re-fixing only existing Curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed.

S&F in repair Hasp and staple 75mm size, of aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair aluminium (Die cast) body Door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) three track window (two shutters glazed) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20736). Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B

S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portaion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 4mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed including taking down old door complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F in repair 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frame work or ply wood for kitchen cupboard,shelves and cupboard complete all as specified and directed.

M & L 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive for kitchen cupboard, shelves and cupboard as per manufacturer's instructions complete all as specified and directed.

S&F 75mm size SS cup board hinges medium weight cold rolled complete all as specified and directed.

S&F Magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed.

S&F 100mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F in repair Telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty etc complete all as specified & directed.

S&F second class HW plain fillets, square / rectangular, wrought face of sectional area exc 13 Sqcm but n.exc 25 Sqcm, securing with screw complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 300 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.

Note : Contractor to supply 01 Nos. plumber and 01 Nos. carpenter to report by 9 o'clock in morning to attend the daily complaints.The rates of the same shall be inclusive of the rates quoted by the contractor in Sch'A' items as above. Please refer PS clause No 29.0.

M/s Jagdish Machinery Stores

Sukhi Electricals

Hirachand Sunderji and co

R.H.ENTERPRISE

jitendra c joisar

S t modi

SIBS CONTRACTOR