3124MBZ

A)Refractory Items and Insulations

Roast Bricks

Fire Tiles Brick No. 27

Fire Tiles Brick No. 29

Angle Bricks Brick No. 88

Ash Bricks Brick No 16 to 24

Air Pocket Brick Brick No 100

Air Pocket Brick Brick No 101

Brick No. 92

Brick No. 93

Insulation Bricks

24" x 12" x 3" tiles

Fire Bricks IS : 8

Ash Door Bricks (Small)

Ash Door Bricks (Big)

Fire Clay

Ceramic Fibre Blanket

Ceramic Tube

B) Electrical Items

Heating Elements Coil

Copper Wire 10 SWG with Porcelain Bit

Brass Connector for Heating Coil

Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification. -a) 3 ½ core X 35 sq. mm. (Al.)

Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification. b) 3core x 6 sq mm (Al)

Supply, delivery at site and laying of 1.1 Kv grade XLPE insulated PVC outer sheathed armoured Alluminum cable conductor power cable of following size either through cable duct or through cable tray or through protection pipes incl end termination as required and as per technical specification.c)Termination of Cable with necessary Gland & Socket

C) Switches and Brakers

200Amp TPN Fuse Switch unit FN Type Open/Closed

100 Amp TPN Fuse Switch unit FN Type Open/ Closed

32 Amp TPN Fuse Switch unit FN Type Open/ Closed

32 Amp-TPN Isolator

16 Amp. DP Isolator (Enclosed)

63 TPN Contactor (L & T) ML 4

Starter for Motor L& T make

D) Fuse and Fuse base

400 A HRC Fuse Base HN/ HQ

200 A HRC Fuse Base HN/ HQ

100 A HRC Fuse Base

63 A HRC Fuse Base

32 A HRC Fuse Base

16 A HRC Fuse Base

300 A Porcellain Fuse

63-100A HRC Fuse

2A 32A Fuse base

E) Meters

0-125A Ammeter AE 4" x 4"

0-15A Ammeter AE 4" x 4"

0-300 A Ammeter AE 4" x 4"

0-500 A Volt Meter AE 4" x 4"

Temperature Controller meter

300/5A Current Transformer

F) Indicators and Controllers

LED Indicating Lamp

Chrome Allumina Thermocouple

G) Mechanical Parts

Repairing and Overhauling the front Door Assembly with S.S rod, Grade 310 , Ceramic Blanket 128 Density 1400 Degree C Temperature Carrying etc. complete required including dismantling the damage items and restore.

Shaft for Door lifting Gear

Handle for Door Lifting

Shaft for door Operating Handle

Pulley for Door Operating

Chain i) 1" x 3 Mtr.

Chain ii) 3/4" x 2.5 Mtr

Spring Sets for door Pressing to guide rail

Trolley Rollers

Trolley Pin

Trolley Bush

Trolley Socket

Ash Collection door hinge block

Liver

Bearing Sets for Blower motor Fresh Air

Bearing Sets for Door Handle Shaft

Handle Pin for Door lifting

Sprocket for door lifting gear

Counter Weight

Ash collection spade and hooks

Ash Collection Tray Stainless Steel

Sprocket for Door operating Handle

Turn Buckle for door lifting chain

Painting of furnace unit and charging trolley by using aluminum paints before applying red oxide.

Painting of Pollution control unit by using aluminum paints before applying red oxide.

Fresh Air Blower

4mm M.S Sheet

M.S Angle 50mm x50mm

M.S Angle 25mm x25mm

Nut, Bolt 5/8 x2” with washer

Nut, Bolt ½” x2” with washer

Nut, Bolt 3/8 x2” with washer

H. POLLUTION CONTROL UNIT

Flue exhaust Blower with SS Impeller (ID Fan)

Induced draught fan for fresh Air (FD Fan)

Supply, delivery at site, installation, Testing and commissioning of S.S. fabricated droplet separator/Mist eliminator with accessories Complete as per technical specification.

Stainless Steel Damper arrangement

Recirculation Pump

10 H.P/7.5 H.P. , 3 ph, 2900 rpm - ABB Make and accessories

2 H.P, 3 ph, 2900 rpm - ABB Make, and accessories

Spray tower unit for Scrubber

Spray tower unit for Ventury

M.S Flange

30 Mtr Height chimney painting with scrubbing thoroughly and applying 2 coat red oxide and two coat Aluminum paints

I. REPAIRING/ REWINDING/ HEAT VERNISHING OF MOTOR

10 H.P. MOTOR

7.5 HP MOTOR

2 H.P. MOTOR

2 H.P MONO BLOCK PUMP MOTOR

UNITECH REFRACTORIES AND ENGINEERING CO

JADOB ELECTRIC CO.