CARRYING OUT REPAIR ROUTINE MAINTENANCE INCLUDING MANUAL AND OPERATION OF ELECTRIC LIFTS IN BLDGS NARMADA HOOGLY TAPTI KAVERI HIMADRI VIDYA VIJAYA AND CERTAIN BLOCKS AT NOFRA UNDER GE(NW) NOFRA COLABA MUMBAI

Amount

Manning & operation of electrically operated lift 08 Ps/ 13 Ps (544/ 884Kg) and 1000/ 2000Kgs Goods lift of make - ECE, OTIS,Thyssenkrupp,etc to serve upto G+12 upper floors (Vidya, Vijaya), 6Ps/8 Ps (408/544Kg) capacity of BBL/OTIS make to serve upto G+6 upper floors in bldg Narmada, Hoogli, Tapti, Kaveri and Himadri adaily 16hrs in two shift from 0600 hrs to 1400 hrs and 1400 hrs to 2200 hrs including taking care of from any pilfrerage/ theft or damage etc, complete all as directed by Engineer-in-Charge in Bldgs :Vidya,Vijaya,Narmada, Hoogli, Tapti, Kaveri , Himadri and Chenab - bldgs (Total- 08 Nos bldgs) Note :- (i) One Lift operator to be employed in two buildings per shift. (ii) Passes will be processed after verification of certificate, Pass shall not be granted without submission of qualification proof & experience certificate for lift operator. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of passes (iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operators

(iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. In case payments are made in current coin or currency notes, contractor shall submit certificate alongwith undertaking of employee that asking for payment other than by cheque or by crediting in the bank account of the empolyee. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Lift operators (semi skilled) report at lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected. (vi) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (vii) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell.

(viii) In case of any necessity for rescue operation or in emergency situations, lift operator shall be capable of rescue the passenger and reacting to the situation (in emergency situations) Rescue operator engaged for rescue operation shall immediate attend the complaint within 30 minutes failing which penalty at Rs 500/- per hour or part thereof shall be levied. (ix) Contractor shall submit the labour licenece as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (x) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (xi) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (xii) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xiii) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost Item No 1 i.e Rs 25,60,800.00, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2) .

(xiv). The deposited amount shall be the difference between estimated cost i.e Rs 25,60,800.00 and amount quoted by lowest bidder for respective item. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment/ release as the case may be. (xv) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working.

Repair/maintenacne of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- 08 PS (544 Kg) G+12 upper floor in building Vijaya 02 Nos Lifts of Make ECE

All as per item No 2 but 13 passenger G + 12 upper floors in building Vidya 02 Nos lifts of ECE Make.

All as per item No 2 but Goods (1000 Kgs) G + 12 upper floors in building (Vijaya) 01No lift Make- ECE

All as per item No 2 but Goods (1000 Kgs) G + 12 upper floors in building (Vidya) 01No lift Make- ECE

All as per item No 2 but 13 PS (884Kgs) in bldgs-Narmada, Tapti, Hoogli, Kaveri. Make : OTIS (04 Nos)

All as per item No 2 but Goods lift (2000Kgs) in bldg Narmada, Tapti, Hoogli, Kaveri. Make -OTIS ( 04 lifts)

All as per item No 2 but Himadri building 'OTIS' make 02 Nos lift 08 PS (544 Kg) G+6 upper floors

All as per item No 2 that 6 passenger (408 Kgs) G+5 in building : A (E), A (W), B (W), C (W), D (E), E(E), F(W) (07 Nos lifts 06 passenger (408 Kgs) G+5 upper floor Thyssenkrupp Make

All as per item No 2 that 6 passenger (408 Kgs) G+5 in building : J (W), K (W),H (E), G (E), G(W) (Total 05 Nos lifts ECE Make)

Note : - for item No 2.00 to 10.00 (i) The Contractor has to carry out the AMC of the Lifts through OEM only (ii) The AMC should cover any/all parts of Lifts if its functions found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. (iii) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (iv) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department. (v) The detailed lift mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.

(vi) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. (vii) Cost of minor spare parts / routine material required for above mentioned maintenance is deemed to be included in the quoted rate except items mentioned here-in-after. No additional cost of spares is admissible for the above maintenance. Decision of the Accepting Officer shall be final & binding regarding minor spares/ routine material (viii) Monthly schedule for proper maintenance of lift and necessary documentation including all spare parts required to be replaced during the period shall be as directed by Engineer-in-Charge. (ix) All minor spare parts and parts required for repair / replacement for maintenance of lifts to be replaced during AMC at no extra payment. (x) Bidders are to submit license from Govt. of maharashtra for maintenace & erection of lifts issued by chief electrical inspector.

Dismantling and taking out unsserviceable existing SS landing door & car door from various floors with its header, lock, brake safety contact, MS cill etc & supply and fix new stainless steel 18 SWG center opening by horizontal sliding stainless steel panel auto door for landing & car completewith header, cill, bracket breaning, safety contact electro magnetic gate locks etc complete all as per exisiting size and design including necessary cutting at vidya vijaya officers lifts opening in masonary work and making good disturbed surface complete al as specified and directed by Engr-in -charge. Location- Vijay, Vidya Building.

Dismantling and taking out unserrviceable car door from car cabin supplying and fixing new car door comprise of 02 nos power operated center opening by horizontal sliding stainless steel panel of 18 SWG with hair line finish flush type panels complete with removed header, hanger door drive unit with full beam infra red sensor upto full length of car door aluminium sill VVVF connection complete al as specified and directed by Engr-in -charge. Location- Vijay, Vidya Building.

Disconnecting and taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated 16 core flat / round type with multistranded copper conductor 1100 Volts grade of size 0.75 Sqmm confirming to IS and including thimbless suspended type freely move with car cabin up and down movements between ground and upper floors including necessary proper connection with midway junction and other connection required in circut complete all as specified and directed by Engineer-in-Charge

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight pully and car cabin with clamps,nuts, bolts and washer etc complete all as specified and directed by Engineer-in-Charge Make : Usha Martin Location : certain building/blocks at Nofra Make:- USHA / MARTIN

Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fix new main steel wire rope 8 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nut, bolts and washers etc complete all as directed by Engineer-in-Charge in certain building/blocks at Nofra. Make : USHA MARTIN

Supply and Fixing New main drive VVVF drive complete with all accessories and electric connection.complete all as directed by Engineer-in-Charge in certain building/blocks at NOFRA

Disconnecting and taking out old defective infra red door sensor of any type and make and supply and fix new infra red door sensor of (make : T L JOHNE) up to full length of car door complete all as specified and directed by Engineer-in-Charge. In certain lift at NOFRA

S&F New Rope Load Sensor at Certain block lifts at Nofra complete all as directed by Engineer-in-Charge in certain building at NOFRA

Disconnection and supply with new maintenance free batteries of 12 volts, 17 AH (set of 4) complete all as specified and directed by Engr in Charge. Make :-Exide / Amron in certain building at NOFRA

Taking down unserviceable cabin fan from car cabin and supply and fixing new new car cabin fan non oscilatting type axist flow single speed 300mm sweep, 240 volts ISI mark with grill complete all as specified & directed by Engr-in-Charge. Make :- EMCO/VBM/CINI.

Taking down unserviceable car top from car cabin and supply and fixing new new car top with falsceliling complete all as specified & directed by Engr-in-Charge.

Supply and fix in repair of recessed mounting squre/round LED downlight 8/6/3 watts with high quality economic energy suitable for ceiling complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement Car door operator with all accessories to match the existing complete all as specified and directed by Engineer-in-Charge.

Supply and fix Aluminum covered wire wound dynamic breaking resistor to absorb the reserve energy dissipation of motor during regeneration in control operation suitable for existing capacity motor up to 15 HP VFD complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement car door (VVVF) drive with all accessories to match the existing complete all as specified and directed by Engr in Charge.

Dismantling and taking out ARD control system and commissioning and testing of new ARD system including PC cards/diodes suitable for 6 PS lift to 13 PS lift including wiring with connection items in existing building 415V 50 Hz 3 Phase comprising with maintainace free battery 12V 17 AH to match with exisiting capacity motor and controll system comlete all as specified and directed by Engr in Charge

Distmantling the exisiting worn out wire mesh at emergency window at lift shaft, Supply and Fixing new wire mesh complete all as specified and directed by Engr in Charge.

Disconnecting and taking out unserviceable emergency alram system(Hooter) complete S&F new emergency alarm system assembly on ground floor landing complete with PCB card battery charging unit and speaker including necessary control electric connection wiring with COP and control panel complete all as specified and directed in Central machine shope and various other lift of Nofra area complete all as specified and directed by Engr in Charge.

Monarch Enterprises

Escon Elevators Pvt Ltd

Veer High Tech Solution

shakti engineering and electrical works