REPAIR/MAINT OF HT/LT NETWORK INCLUDING TRANSFORMERS, VCBs, LT PANELS AND ACCESSORIES AT RAMPUR AND URI AND SUPPLY AND TREATMENT OF DISINFECTION MATERIAL FOR WATER TREATMENT AT VARIOUS LOCS UNDER GE 969 EWS

Amount

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out of soft/loose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Returning. filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm complete all as specified and as directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified and as directed.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenchs as cable protection complete all as specified and as directed.

M&L for cement concrete for foundation filings and mass conctere type D2 (1:4:8) using (40 mm graded aggregate). Complete all as specified and as directed.

M&L for cement concrete for coping of poles using B1 (1:2:4), using (20 mm graded aggragate) smooth finishing without using extra cement complete all as specified and as directed.

M&L for cement concrete for foundation fillings and.mass conctere type C2 1:3:6 using (40 mm graded aggregate) complete all as specified and as directed.

Supply and erection of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bots, nuts and screws as specified type 410 SP-31 (09 metres long) including two coat of black bituminous paint internally throughout and externally upto embedded portion and applying two coatsof synthetic enamel paint over a coat of red oxide primer with black and white strip of 30 cm each upto 1.50 metre height and two coats of aluminium paint over a coat of red oxide primer externally on remaning exposed surface after preparation of surface and eraction in position, complete all as specified and as directed. (Excavation and earth work, PCC for foundation and coping, channel, clamps nuts, bolts to be measured and paid separately)

Supply and install cross arms ,bracing,support,clamps channels, grill work etc fabricated from structural steel section including nuts bolts and washers of any size or as directed including two coat of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

Dismantiing cross-arms of M.S. channel or angle sections etc. complete all as specified and as directed.

S&F in repair ACSR conductor of (weasel) 6/1 X 2.59mm, streching properly on insulators and binding with aluminium binding wires, jumpers including fixing on insulators on each poles in span and tightening with permissible sag in between span etc including taking down of existing ACSR Conductors complete all as specified and as directed.

S&F MCCB 400 Amps 3 pole 415V of 36 KA and connecting to bus bars and cable end terminations with suitable lugs, including disconnecting and removing the unserviceable MCCB complete all as specified and as directed.

All All as per Above item No. 13 but 250 amps 36 KA

All as per Above item No. 13 but 200 Amps 36KA

All as per Above item No.13 but 160 Amps 36 KA

All as per Above item No. 13 but 125 Amps 16 KA

Restringing ACSR conductor of any size and type as directed by Engineer-in-charge including binding to insulators, jumpering etc complete all as specified and as directed.

Supply and laying Gl pipe 80 mm dia light grade for cable protection on pole/road/culvert crossing and for on pedestal. Complete all as specified and as directed.

Supply and erection of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bots, nuts and screws as specified type 410 SP-55 (11 metres long) including two coat of black bituminous paint internally throughout and externally upto embedded portion and applying two coats of synthetic enamel paint over a coat of red oxide primer with black and white strip of 30 cm each upto 1.50 metre height and two coats of aluminium paint over a coat of red oxide primer externally on remaning exposed surface after preparation of surface and eraction in position, complete all as specified and as directed. (Excavation and earth work, PCC for foundation and coping, channel, clamps nuts, bolts to be measured and paid separately)

S&F in repair 30 W LED street light new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source & electronic driver suitable for pole dia up to 40 mm.

Supply and fixing Gl pipe, bracket for street light fittings made out of 40 mm dia GI Pipe medium grade 1.20 m long bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and two coats of aluminium paint with a base coat of red oxide primer complete all as specified and as directed.

Supply and lay cable PVC insulated unsheathed of size 1.5 Sqmm 3 core copper conductor for service connections from junction box to light fitting.

Dismantling Taking out insulators any type, any size from LT over head line complete all as specified and as directed.

Supply and fix of pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height and 65mm dia for 1100 volts grade complete all as specified and as directed.

S&F Shackle Type, Porcelain, vitreous, white, brown or green, insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 100mm height, 115 mm dia for working pressure 1100 volts grade, section of strap 31 x 5mm, dia of bolts 14mm, complete all as specified and as directed.

M&L for Fibre LT over head line seperators suitable for 4 wires fixing on LT OH lines including dismantling of old damaged/ Un-serviceable LT line spacers of any type complete all as specified and as directed.

M&L for Fibre LT over head line seperators suitable for 3 wires fixing on LT OH lines including dismantling of old damaged/ Un-serviceable LT line spacers of any type complete all as specified and as directed.

M&L for Fibre LT over head line seperators suitable for 2 wires fixing on LT OH lines including dismantling of old damaged/ Un-serviceable LT line spacers of any type complete all as specified and as directed.

Painting to existing steel tubular LT poles, 9m long including cross arms, channels, angle iron support, bracings, clamps etc with two coats of aluminium paint Superior quality of approved make on surfaces exposed to view and making 30 cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including preparation of old painted surfaces by scraping etc complete and writing pole numbers of 2 inches bold letters with black paint after painting, complete all as specified and as directed.

Cutting branches/ plants / bushes obstructing at electric poles/along the LT over head lines including cutting of undue sufaces & disposal of materials upto a distance not exceeding 50m complete all as specified and as directed.

S&F Stay assembly (Diameter of stay rod in 20 mm) complete, with accessories as show in electrical plate no.1 (loop type insulator, stay clamps, excavation and concrete rneasured separately) including dismantling of existing stay assembly. Complete all as specified and as directed.

S&F Loop type insulators, vitreous porcelain, white, brown or green of large size, with overall dimensions 90mm x 140 mm, clearance of hole 25.5 mm complete all as specified and as directed.

Supply and laying XLPE insulated PVC FRLS. amoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 06 Sq mm 2 Core.

All as per above item No 34 here-in-before but of size 4 core 10 Sq mm

All as per above item No 34 here-in-before but of size 4 core 16 Sq mm

All as per above item No 34 here-in-before but of size 3.5 core 25 Sq mm

All as per above item No 34 here-in-before but of size 3.5 core 35 Sq mm

S&F changeover switch in sheet metal enclosure of capacity 32 A. 415V, 50 Hz, SPN along with SS enclosure version require separate cable gland box including all connected accessories complete all as specified and as directed.

S&F ON load changeover switch in sheet metal enclosure of capacity 63 A. 415V, 50 Hz, 4P along with SS enclosure version require separate cable gland box including all connected accessories complete all as specified and as directed.

S&F ON load changeover switch in sheet metal enclosure of capacity 100A, 415V, 50 Hz, 4P along with SS enciosure version require separate cable gland box including ail connected accessories complete all as specified and as directed.

S&F ON load changeover switch in sheet metal enclosure of capacity 125A, 415V, 50 Hz, 4P along with SS enclosure version require separate cable gland box including al connected accessories complete all as specified and as directed.

Supply and fixing ON load changeover switch in sheet metal enclosure of capacity 200 A, 415V, 50 Hz, 4P along with SS enclosure version require separate cable gland box including all connected accessories complete all as specified and as directed.

Repair/Maintenance, replacement & testing of LED drivers for street lights/ flood lights of capacity upto 15 Watt to 48 Watt suitable for any make and type LED street lights/ flood light complete all as specified and as directed.

Repair/Maintenance, replacement & testing of LED drivers for street lights/ flood lights of capacity upto 50 Watt to 100 Watt suitable for any make and type LED street lights/ flood light complete all as specified and as directed.

M&L danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts & nuts of approved size of 25 x 20 cm size complete all as specified and as directed.

M&L for taking out old unsv loop in and loop out box and Supply and fix loopin loop out fuse junction box of size 300 x200 x 105 mm made out of thermo plastic Polycarbonate with IP 66/67 weather proof for outdoor installation (with knockouts of cable entry) protection with terminals fuse cutout-01 No with 6A MCB, suitable for cable size 6-35 sqmm and fixing on steel tubular pole at a height not less than 1.5m above ground level with the help of clamps two nos of F1 20 x 3 mm and suitable nuts and bolts complete all as specified and as directed.

S&F Lightning arresters expulsion type complete with all fittings, transmission class, 11000 Volts discharge capacity 65 Kilo amp, as connected with earthing properly complete all as specified and as directed.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and as directed.

S&F Cable jointing kit for 11 KV (Earthed) grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and as directed.

Supply only Alum Ferric Grade-4, Packing type : Loose slab of 20 Kg Each confirming to IS-299:1989 for purification of water maintaining 30 PPM maximum and Arsenic (as per ISO 203) 4 PPM max and Lead 20 PPM complete all as specified and as directed. (Note :- Contractor is responsible for producing the date of manufacturing, date of expiry, purchase voucher & test certificate)

Supply of Sodium Hypochlorite Gde-I high strength cholrination chemical for disinfectant, in granual solid from for water treatment in factory sealed non returnable HDPE containers (40 to 50 Kg each) having chlorine concentration level of 75% shelf life upto 01 years, stability of chlorine residual 06 Hrs, make as approved by GE. Complete all as specified and as directed. Make :- Aqua-zing, Acuro Organics Limited, Puri Chlor (Note :- Contractor is responsible for producing the date of manufacturing, date of expiry, purchase voucher & test certificate)

Supply only Chlorine testing kit (including testing material) to show the PPM all as specified and as directed.

Supply only TDS Meter to measure TDS of water all as specified and as directed.

Note:- Schedule of credit Rs 56,370.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S RASHID CONSTRUCTION

M/S RAJ ENGINEERS

M/S Khan Hussain & Co.

k create innovative engineering solution