Annual Plan-Providing Garden Lights for Arackamon Idathavalam and Athikkayam Bridge-Project No. S0227/27 of Naranammoozhy GP

OD187442/2026-2027:Supply, Conveyance and Erection of 80mm dia, 4.05mm thick GI pipe, Hot-Dip Galvanized (HDG) as per IS 2629 / ASTM A123 with Zinc Coating Thickness 70 - 100 microns, Jindal or other equivalent superior make in single section for lamp post with provision for fixing cable entry box at a height of 1.25m from the base and painting with 2 coats of highly reflective, heat-resistant, and rust-inhibiting aluminium paint over a coat of zinc chromate primer etc. as required.

OD187428/2026-2027:Supply and welding Base Plate of size 120mm x 120mm x 12mm, Hot-Dip Galvanized (HDG) as per IS 2629 / ASTM A123 with Zinc Coating Thickness 70 - 100 microns, as required and fixing at the end of the GI Pipe of given size including suitable anti-corrosive aluminium painting for making Electric Lamp Post, as advised by the Engineer in Charge, at site.

OD209197/2026-2027:Supply of 50 x 6 mm GI strip, Hot-Dip Galvanized (HDG) as per IS 2629 / ASTM A123 with Zinc Coating Thickness 70 - 100 microns, including cutting, bending, drilling holes, welding etc. and painting with aluminium paint for making clamps for fixing the lamp poles in position, including suitably fixing the poles using heavy-duty, corrosion-resistant, 12mm dia, 75mm long GI bolts and nuts, check nuts washers etc. as required.

OD187433/2026-2027:Supply installation testing and commissioning of Single Arm Galvenised Iron (GI) Bracket 0.5 m long, Hot-Dip Galvanized (HDG) as per IS 2629 / ASTM A123 with Zinc Coating Thickness 70 - 100 microns, Bajaj or other equivalent superior make, for fixing LED Outdoor Light Fittings, suitable for fixing on top of the GI pole having width Across Flat 80mm and fixing rigidly using suitable machine screws/ fasteners etc. as required and as advised by the Engineer-in-Charge.

90.15.3.1:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.3:Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.