Loading
Loading…
Loading…
Tender ID
Tender Value
₹4.2 L
EMD Value
₹8,368
Closing Date
27 Mar 2026, 11:00 amClosed
Assistant Engineer
Berhampore Sub Division no-I
Minor Repair of the Residence of the Additional District Magistrate (Development) related to Occupation Change at Berhampore, Murshidabad during the year 2025_26.
2026_WBPWD_1022557_1
eNIT 16 of AE/BSD-I of 2025-26
Open Tender
CIVIL WORKS
Percentage
28 days
Berhampore Sub Division no-I
Please refer Tender documents.
4 documents required · 4 mandatory
₹8,368
Yes
Berhampore Sub Division no-I
29 Jul 2026
16 Mar 2026
30 Mar 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
20 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out Mirzapur or glazed porcelain tiles carefully by
chiselling from walls or floor including stacking serviceable
material as directed. | 1 | sqm | - | - |
| 2Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar(b) 20 mm thick plaster | |||||
| 3Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (A) Deep Colour & White | |||||
| 4Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge. | |||||
| 5 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) In Ground floor (one Coat) b) Solvent based interior grade Acrylic Primer | 1 | sqm | - | - |
| 6 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :
(Two coats) ii) Luxury Quality | 1 | sqm | - | - |
| 7Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | |||||
| 8Priming one coat onTIMBER or PLASTERED surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | |||||
| 9Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. | |||||
| 10(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | |||||
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.22 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.83 MB
2911.pdf
Tender Documents • 0.50 MB
BOQ_2513291.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .