Fresh Tender GENERAL Alappuzha JP 2023 24 PROJ NO 845 Mararikulam Division Makki Coloni Community Hall Construction in ward 1 in Mararikkulam south GP 2023 24 Mararikulam South Gp General Civil Work

Work Name:GENERAL-Alappuzha JP- 2023-24 PROJ NO.845 Mararikulam Division Makki Coloni Community Hall Construction in ward-1 in Mararikkulam south GP 2023-24-Mararikulam South GP-General Civil Work

潤獷愠摮漠桴牥映慲敭ⱳ眠潲杵瑨映慲敭⁤湡⁤楦數⁤湩瀠獯瑩潩楷桴栠汯⁤慦瑳氠杵⁳牯眠瑩⁨慤桳映獡整敮獲漠⁦敲畱物摥搠慩☠氠湥瑧⁨栨汯⁤慦瑳氠杵⁳牯搠獡⁨慦瑳湥牥猠慨汬戠⁥慰摩映牯猠灥牡瑡汥⥹‬獵湩⁧潧摯焠慵楬祴䄠橮汩⁩潷摯⼠慪正眠潯ﭤ⸹㠴㈮债潲楶楤杮愠摮映硩湩⁧⹍⹓䜠楲汬⁳景爠煥極敲⁤慰瑴牥湩映慲敭⁳景眠湩潤獷攠捴‮楷桴䴠匮‮汦瑡ⱳ猠畱牡⁥牯爠畯摮戠牡⁳瑥⹣椠据畬楤杮瀠楲業杮挠慯⁴楷桴愠灰潲敶⁤瑳敥牰浩牥愠汬挠浯汰瑥⹥楆數⁤潴漠数楮杮⽳眠潯敤牦浡獥眠瑩⁨慲汷瀠畬獧猠牣睥⁳瑥ɣ杫Ů㔀⸰⸹⸳㨱牐癯摩湩⁧湡⁤楦楸杮瀠湡汥摥漠⁲慰敮敬⁤湡⁤汧穡摥猠畨瑴牥⁳潦⁲潤牯ⱳ眠湩潤獷愠摮挠敬敲瑳牯⁹楷摮睯ⱳ㌠‰浭琠楨正猠畨瑴牥⁳湩汣摵湩⁧卉⁉慭歲摥䴠匮‮牰獥敳⁤畢瑴栠湩敧⁳牢杩瑨映湩獩敨⁤景爠煥極敲⁤楳敺眠瑩⁨敮散獳牡⁹捳敲獷‬硥汣摵湩⁧慰敮楬杮眠楨档眠汩敢瀠楡⁤潦⁲敳慰慲整祬‬污潣灭敬整愠⁳数⁲楤敲瑣潩昰䔠杮湩敥⁲湩‭档牡敧‮獵湩⁧湁楪楬 慊正眠潯彤
〵㤮㐮ㄮ债潲楶楤杮愠摮映硩湩⁧慰敮楬杮漠⁲慰敮楬杮愠摮朠慬楺杮椠慰敮敬⁤牯瀠湡汥摥愠摮朠慬敺⁤桳瑵整獲映牯搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷⠠牁慥漠⁦灯湥湩⁧潦⁲慰敮湩敳瑲⁳硥汣摵湩⁧潰瑲潩湩楳敤朠潲癯獥漠⁲敲慢整⁳潴戠⁥敭獡牵摥 慰敮楬杮映牯瀠湡汥摥漠⁲慰敮敬⁤湡⁤汧穡摥猠畨瑴牥⁳㔲洠潴㐠‰浭琠楨正甠楳杮朠潯⁤畱污瑩⁹湁楪楬 慊正眠潯፤
〵㤮㘮ㄮ债潲楶楤杮愠摮映硩湩⁧汧穡摥猠畨瑴牥⁳潦⁲潤牯ⱳ眠湩潤獷愠摮挠敬敲瑳牯⁹楷摮睯⁳獵湩⁧‴浭琠楨正映潬瑡朠慬獳瀠湡獥椠据畬楤杮䤠䥓洠牡敫⁤⹍⹓瀠敲獳摥戠瑵⁴楨杮獥戠楲桧⁴楦楮桳摥漠⁦敲畱物摥猠穩⁥楷桴渠捥獥慳祲猠牣睥⹳唠楳杮䄠橮汩⁩潷摯⼠樠捡潷摯㌠‰浭琠楨正猠畨瑴牥ࡳ
⸹㌵债潲楶楤杮㐠砰‵浭映慬⁴物湯栠汯⁤慦瑳㐠‰浣氠湯⁧湩汣摵湩⁧楦楸杮琠牦浡⁥楷桴ㄠ‰浭搠慩敭整⁲潢瑬ⱳ渠瑵⁳湡⁤潷摯湥瀠畬獧愠摮攠扭摥楤杮⁳湩挠浥湥⁴潣据敲整戠潬正㌠砰〱ㅸ‵浣ㄠ㌺㘺洠硩⠠ㄠ挠浥湥⁴›″潣牡敳猠湡⁤›‶牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥攀捡ᅨ
〵㘮ㄮ㔮区汯摩戠潬正洠獡湯祲甠楳杮瀠敲挠獡⁴潳楬⁤汢捯獫⠠䘠捡潴祲洠摡⥥漠⁦楳敺㌠砰〲㉸挰牯渠慥敲瑳愠慶汩扡敬猠穩⁥潣普物業杮琠卉㈠㠱‵慐瑲䤠漠⁦㤱㤷映牯猠灵牥猠牴捵畴敲甠⁰潴映潬牯琠潷氠癥汥琠楨正敮獳㈠挰湡⁤扡癯⁥湩›䵃ㄠ㘺⠠ㄠ挠浥湥⁴›‶潣牡敳猠湡⥤攠捴挠浯汰瑥٥
〵㘮㈮㈮区汯摩洠獡湯祲甠楳杮瀠敲挠獡⁴潳楬⁤汢捯獫⠠慦瑣牯⁹慭敤 景猠穩⁥〳㉸砰㔱浣漠⁲敮牡獥⁴癡楡慬汢⁥楳敺挠湯楦浲湩⁧潴䤠⁓ㄲ㔸瀠牡⁴⁉景ㄠ㜹‹潦⁲畳数⁲瑳畲瑣牵⁥灵琠汦潯⁲睴敬敶楷桴琠楨正敮獳ㄠ挵湩㨠䌠⁍㨱‶ ‱散敭瑮㨠㘠挠慯獲⁥慳摮 瑥⁣潣灭敬整‘㔀㤮㌮䌺湥整楲杮愠摮猠畨瑴牥湩⁧湩汣摵湩⁧

strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platformÊ
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).Î5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more[email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)m13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)11.41A.1.1: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm11.41A.3.1: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm´
17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lidR
51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)<br> 2. 15 to below 25 flush capacity7
50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wallmetreÓ50.18.9.2.2:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2Û50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2Û50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2×50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2:
50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall9
50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall”50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bendnoª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow™50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbowû
8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coatsŠ13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workl
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksGOD367630/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.per sqm
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved stee

l primer, including welding and bolted with special shaped washers etc. completeè50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre¤
OD369387/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.