CERTAIN REPAIR / MAINTENANCE OF FITTINGS AND FIXTURES, DBS, SUBMAIN WIRING, ELECTRIC GEYSER, SOLAR WATER HEATER AND ALLIED ELECTRIC WORK AT NAUSENA BAGH AND NOFRA UNDER GE NAVY PORBANDAR

Amount

Taking down aluminium point wiring (light, fan, buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials to store for keeping safe custody or for taking credit and making good disturbed surfaces of walls, floors etc as per existing all as Specified and directed by Engr-in-Charge

Taking down unservicable/partly unscrewing from boards/outlets light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as Specified and directed by Engr-in-Charge.

Point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for the following :-

(a) One light point controlled by one one way switch

(b) One fan/ exhaust fan point controlled by one way switch

(c) One 5 Amps 3/5 pin socket outlet on same board with other switches.

(d) One 5 Amps 3/6 pin socket outlet on independent board

(e) One buzzer point controlled by one way switch

(f) One light point controlled by two Nos two way switches

All as per item no 3 hereinbefore but with using 2.5 sq mm PVC insulated multi-stranded copper conductor FRLS cable for independent switch socket outlet 6 pin 5/15 Amps and incl 2.5 sqmm PVC insulated multi-stranded FRLS copper conductor single core as earth continuity conductor wire duly connected to all common earth point, drawn through and including 20 mm dia PVC surface conduit in any length all as directed at site complete all as specified and directed.

All as per item no 3 hereinbefore but Point 4 sq mm PVC insulated multi-stranded copper conductor FRLS cable for industrial socket outlet 3 pin 16 Amps point and one single core 4 sq mm PVC insulated FRLS unsheathed copper cable as earth continuity conductor (colour green) fixed to dolly complete all as specified and directed.

Switch piano flush type 5/6 Amps single pole one way 230 Volts complete all as specified and directed.

Modular switch 6 Amps, one way, one module with cover plate 240 volts, 50 Hz fixed complete all as specified and directed.

Switch piano flush type 6 amps two way SP 230 volts AC fixed complete all as specified and directed.

Modular switch 6 Amps two way one module with cover plate 240 volts 50 Hz fixed complete all as specified and directed.

Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volts fixed complete all as specified and directed.

Modular socket 6A 2/3 pin combined 2 module with cover plate complete all as specified and directed.

Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type with PVC box complete all as specified and directed.

Switch socket combination 5 in 1, 5 pin 16 Amps flush type with PVC box complete all as specified and directed.

Modular socket 16 Amps, 2/3 pin cobined 2 module with cover plate complete all as specified and directed.

Modular switch 16 Amps one way one module 240 volts 50 Hz fixed complete all as specified and directed.

Ceiling rose surface bakelite, 65x50mm 2 or 3 terminals complete all as specified and directed.

Call Bell AC 230 volts single pole, ding dong type fixed on and including 03 mm thick plastic laminated sheet cover of suitable size with brass screws and washers etc complete all as specified and directed.

Bell push, flush type 5 Amps 230 Volts complete all as specified and directed.

Modular bell push 6A 1 module with cover plate complete all as specified and directed.

Electric regulator, modular type, 2 module, 100/120 W, duly ISI marked complete all as specified and directed.

Fan step regulator, rotary type, 120 W, modular hum free AC 240 volts, 2 module duly ISI marked complete all as specified and directed.

Lamp holder insulated body with back plate for angle holder complete all as specified and directed.

Fixing only LED tube light fittings 1x20 Watt, 4 feet, 220V, AC decorative box type with including connecting up with new 3 core flexible cppper conductor cable of suitable size of from ceiling rose complete all as directed by Engr-In-Charge.

Fixing only LED tube light fittings mirror type with high output diffuser with driver including connecting up with new 3 core flexible copper conductor cable of sutable size from ceiling rose complete all as directed by Engr-In-Charge. Note for Item No. 23.00 & 24.00 :- LED light fittings will be issued under Sch 'B' free for fixing only.

Decorative light ftting, PVC body, oval in shape & LED lamp suitable for wall fitting including connecting up with 3 core flexible copper conductor cable with suItable size complete all as directed by Engr-In-Charge.

Driver for garden LED 10 W light fitting 2 feet Crompton complete all as directed by Engr-In-Charge.

LED post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light complete with IP65 protection with impact and corrosion resistant complete with driver and lamp etc all as directed by Engr-In-Charge.

Earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp, flush mounting type complete all as directed by Engr-In-Charge.

Triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 32 Amp complete all as directed by Engr-In-Charge.

Triple pole and earth enclosure with a three pin and earth plug with sokcet complete with one triple pole MCB 63 Amp complete all as directed by Engr-In-Charge.

Taking down sub main wiring of aluminium conductor PVC insulated cable of any size drawn through rigid steel / PVC conduit GI wire accessories etc complete and removing materials from site except those which are found serviceable kept in safe custody for reuse in the work all as Specified and directed by Engr-in-Charge.

Sub main wiring concealed with 4Sqmm (Nominal area) two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, confirm to IS with copper conductor drawn into rigid non-metallic PVC concealed conduit complete including 4sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor cable FRLS as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge.

Sub main wiring concealed with 6Sqmm (Nominal area) two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, confirm to IS with copper conductor drawn into rigid non-metallic PVC concealed conduit complete including 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor cable FRLS as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge.

Sub main wiring concealed with 10Sqmm (Nominal area) two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, confirm to IS with copper conductor drawn into rigid non-metallic PVC concealed conduit complete including 10 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor cable FRLS as earth wire and duly connected to all common earth point all as Specified and directed by Engr-in-Charge.

MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door complete all as directed by Engr-In-Charge.

MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 6 way Double door complete all as directed by Engr-In-Charge.

MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 16 way Double door IP-43-IK09 protection grade complete all as directed by Engr-In-Charge.

MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 240Volts SPN with 8 way Double door, IP-43-IK09 protection complete all as directed by Engr-In-Charge.

MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 12 way Double door IP-43-IK09 protection grade complete all as directed by Engr-In-Charge.

MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps complete all as directed by Engr-In-Charge.

MCB TP 415 Volts, 'C' series, breaking capacity 10 KA of rating 25 to 63 Amps complete all as directed by Engr-In-Charge.

MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 to 63Amps complete all as directed by Engr-In-Charge.

MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as directed by Engr-In-Charge.

MCB SP 240 Volts 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as directed by Engr-In-Charge.

RCCB DP 100 mA of rating 6 A-25 Amps complete all as directed by Engr-In-Charge.

MCB DP upto 25 Amps rating type complete all as directed by Engr-In-Charge.

MCCB TPN 63 Amps, 415Volts, 16 KA complete all as directed by Engr-In-Charge.

Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI Strip 25x4mm by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 32mm bore light grade all as shown in elect plate No 3 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work in any type of strata , salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore as watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with CRS Bars 8mm dia at the rate of 100mm centre to centre both way with 12mm dia lifting handle and pit / chamber constructed 50 cm away from the edge in PCC 1:3:6 type C1, Angle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

Taking down fan of any make/type/sweep,sealing cable end ,dismantling of blades and for repair /overhauling complete all as directed by Engr-In-Charge.

Overhauling of ceiling fan /wall fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same including small screw and bolts, fixing and connecting on its existing position and testing on completion all as specified and as directed .(Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares (bearing, bush, capacitor, pin) required shall be measured and paid separately in the relevant items).

Rewinding of ceiling fan, segregation of unserviceable parts, cutting and removing out burnt copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400 mm sweep fan (I) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush. - 01 No

Fixing or hanging only ceiling fan after overhauling/repair of winding above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) complete all as directed by Engr-In-Charge.

Spray Painting of ceiling fan / Wall fan of any sweep complete including fan blade down rod with synthetic enamel paint including cleaning and removing dust,dirt,oil particles by chemicals, making smooth surface for painting ,filling cavities with filler complete all as specified and directed.

Taking down exhaust fan, of any size and PVC, Mettalic any type for cleaning/servicing removing oil particles by chemicals and overhauling the same, refixing the same on its existing position and connection up complete all as directed by Engr-In-Charge.

Rewinding of exhaust fan 225 to 300 mm sweep, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including necessary transportion to workshop complete all as directed by Engr-In-Charge.

Fixing only Exhaust fan after winding fan under item No. 88 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) complete all as directed by Engr-In-Charge.

Supply only gun metal bush of any size complete all as directed by Engr-In-Charge.

Supply only bearing for ceiling fan complete all as directed by Engr-In-Charge.

Supply only fan capacitor 2.5 MFD complete all as directed by Engr-In-Charge.

Supply only fan capacitor 4 MFD complete all as directed by Engr-In-Charge.

Canopy of ceiling fan bottom and upper side of size 1200/1400 complete all as directed by Engr-In-Charge.

Wooden frame of suitable size and length for fixing of exhaust fan in existing hole including all nut/bolts complete all as specified and directed by Engineer-in-Charge.

Opening the geyser 25/50 ltr capacity and taking out inner tank and glass wool from inside the geyser , descaling & washing with acid to remove the scales, dirt etc if any and refixing the same after reassembly into geyser and proper filling of new glass wool around inner tank complete all as specified & directed. (Note:- Glass wool will be measured & paid separately under relevant item of the schedule)

Glass wool pf any colour complete all as directed by Engineer-in-Charge.

Geyser inner water storage tank of any type capacity 25 ltr make of metal stainless steel complete all as directed by Engr-In-Charge.

Fusible plug suitable for 25 Ltrs Cap storage type water heater including provn of necessary GI fittings removal of existing valves fixed in repair / replacement complete all as specified and directed.

Heating element 1KW/1.5 KW capacity of storage type water heater of compatible type (ISI Marked) including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements fixed in repair / replacement complete all as specified and directed.

Heating element 2000 watt complete all as directed by Engr-In-Charge.

Thermostat suitable for 25/50 ltrs capacity storage type water heater including removal of old unserviceable ones fixed in repair / replacement complete all as specified and directed.

Indicator lamp assembly complete for water heater (geyser) suitable to work on AC 230 volts supply and to match the existing size any type including disconnecting and fixed in repair / replacement complete all as specified and directed.

Drain plug brass with washer suitable for 25 ltrs geysers fixed in repair / replacement complete all as specified and directed.

Geyser hot water heavy duty connecting pipe 600/450mm long made out of branded flexible pipe with brass female coupling for connecting geyser outlet to existing connecting point 15 mm dia fixed in repair / replacement complete all as specified and directed.

Geyser cold water heavy duty connecting pipe 600/450mm long made out of branded flexible pipe with brass female coupling for connecting geyser outlet to existing connecting point 15 mm dia fixed in repair / replacement complete all as specified and directed.

Anchor bolts/ Fastner 75mm long made out of stain less steel for proper fixing of geysers complete all as specified and directed.

PVC insulated and FR PVC Round Sheathed , copper conductor (flexible) industrial cable of size 1.5 Sqmm 3 core, 1100 volt, conforming to IS 694 complete all as specified and directed.

Supply & fix plug top 3 pin 15 Amps 240 V, ISI complete all as specified and directed.

Stainless steel solar water tank of capacity 100 Ltr including taking out old unservicable tank after opening inlet/outlet connections by dismantling existing rusted /broken gate valve, GI/CPVC pipe and all connection and cleaning lines and making functional after carrying out repairs/replacement including nut bolt, washer, patch welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed. Note :- Supply & fixing of gate valve/pipes wiil be measured and paid seperately under relevent item of schedule.

Stainless steel solar water tank of capacity 300 Ltr including dissconnecting inlet/outlet connections b, gate valve, GI/CPVC pipe and all connection and cleaning lines and making functional after carrying out repairs/replacement including nut bolt, washer, patch welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed. Note :- Supply & fixing of gate valve/pipes wiil be measured and paid seperately under relevent item of schedule.

Stainless steel solar water tank of capacity 400 Ltr including dissconnecting inlet/outlet connections b, gate valve, GI/CPVC pipe and all connection and cleaning lines and making functional after carrying out repairs/replacement including nut bolt, washer, patch welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed. Note :- Supply & fixing of gate valve/pipes wiil be measured and paid seperately under relevent item of schedule.

Stainless steel solar water tank of capacity 900 Ltr including dissconnecting inlet/outlet connections b, gate valve, GI/CPVC pipe and all connection and cleaning lines and making functional after carrying out repairs/replacement including nut bolt, washer, patch welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed. Note :- Supply & fixing of gate valve/pipes wiil be measured and paid seperately under relevent item of schedule.

Thermosyphonic type solar water panel of size suitable for solar water heater capacity of 100 Ltr including taking out old unservicable tank after opening inlet/outlet connections by dismantling existing rusted /broken gate valve, GI/CPVC pipe and all connection and including descaling lines ,making functional after carrying out repairs/replacement including nut bolt, washer, welding work, including complete testing after installation fixed in repair / replacement complete all as specified and directed.

MS framed work as in support structure of solar panel of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel chequred sheeting or other covering etc. and fixing conforming to Fe-410-S complete all as specified and directed.

Gun metal / Brass ball valve screwed both ends for iron pipe, ISI marked of size 25mm bore including taking out old valve complete all as specified and as directed.

Gun metal / Brass ball valve screwed both ends for iron pipe, ISI marked of size 20mm bore including taking out old valve complete all as specified and as directed.

25mm bore CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C, leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

20mm (outer dia) CPVC pipes, UV stabilised, SDR 11 pressure bearing capacity 28.12 kg/sq.cm @ 23 C ,leak proof, tough, rigid and suitable, fixed to walls with clamps / ceiling / concealed in wall including cutting chases and making good, or laid in trenches / jointed with sealant solvent leak proof including all fittings elbow, Tee, Socket, Reducer, Bushing, Step over head bends, End cap, End pugs, union, tank nipple and special fittings (brass insert threaded) like male, female treads, adapters, brass tee & reducers, male brass threaded adaptor, female brass threaded adaptor, flange including making Suitable size of brass threaded terminal to match the CP/PTMT plumbing fittings and interconnections as required for internal and external water supply applications complete all as specified and as directed.

RAJ ENTERPRISE

ALBA AC AND REF SERVICES