Renovation of existing sheds

Demolition of brick work including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead.

Demolishing and disposal of unserviceable materials within 100 metres lead - Unreinforced cement concrete up to 15 cm thickness.

Dismantling AC or Gl sheet roofing including ridges, rafters and purlins etc , and carefully stacking useful materials for reuse

Dismantling Steel work in built up section in angles, flats up direction including all gusset plates , bolts & nuts cutting rivets, welding joints etc.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil - Mechanical means up to 3m depth

Conveyance of earth/ sand/ gravel etc. to a distance upto 5 kms from the site of work to the place where specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.

Dismantling, clearing away and carefully stacking materials useful for re-use, through scraping of old plastered surface

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm (0.54 Cum), 20 mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) -Grade M 15 using 20 mm ( 0.54 Cum) and 12 mm (0.36 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Construction of brick masonry in CM (1:6) using well burnt bricks 2nd class or ground moulded (Non- modular or traditional size) (230X110X70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Plastering in cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

- do- in CM (1:3) 12 mm thick

- do- in CM (1:5) 12 mm thick

- do- in CM (1:5) 20 mm thick

Flooring with vitrified tiles of 1st quanity of double charged (with double layer pigment)/ multi charged stain free full body porcelain vitrified tiles of size 600X600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Flooring with antiskid/ non-skid red or white full body 1st quality ceramic floor tiles of Size 300 mm X 300 mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and design of all series & shades (as per manufacture specification), set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg/10sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). 'Supply of glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Supply and fixing of 10 mm wide PVC edge beading including cost and conveyance of all materials and incidental charges etc., complete.

Painting two coats for new internal walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade over a priming coat with ready mixed cement primer (water thinnable) of interior grade-I {total three (3) coats} for new work, after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls - For New work

Painting two coats for old internal walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade over a priming coat with ready mixed cement primer (water thinnable) of interior grade-I {total three (3) coats} after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls - For Old work

Painting two coats for new external walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter over a priming coat with ready mixed cement primer (water thinnable) of exterior garde-2 {total three (3) coats} of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for External walls - For New work

Painting two coats for old external walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter over a priming coat with ready mixed cement primer (water thinnable) of exterior garde-2 {total three (3) coats} of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for External walls - For Old work

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/ muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for new internal (or) new external walls.

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/ muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for old internal (or) old external walls.

Supplying and fixing in position MS Tubes & pipes of all diametres as per IS-1161 of approved design, including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power changes etc., and cost and conveyance of all materials and fixing, necessary cuttings, bending, welding, grinding and finishing smooth, including cost of welding rods, power charges, including painting two (2) coats with synthetic enamel paint grade-I, over a primary coat (Red oxide metal primer) {total three (3) coats} of approved make and colour including cost of making the holes in to RCC or masonry works and making good the same wherever necessary, including labour charges for fixing in position, cost and conveyance of all materials, incidental charges etc., complete.

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.20 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket/TPV, GI fasteners 100X8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single/ double glass panes and silicon sealant. Fixed windows/ ventilators made of (small series) frame 47X50 mm & mullion 47X68 mm both having wall thickness of 1.90 ± 0.20 mm and single glazing bead of appropriate dimension. Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.20 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket/TPV, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100X8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc.. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single/ double glass panes, wire mesh and silicon sealant. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92X44 mm & sash 32X60 mm both having wall thickness of 1.90 ± 0.20 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.480 cu.m, 10 mm HBG crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC) etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department, including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges, for finished item of work (APSS No. 402) - For Lintels.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36 mm dia of Fe 500/Fe-500D/Fe550 (as per IS 1786 - 2008) for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire, 2 Nos of 20G binding wire in tandem are to be strictly adhered).

Manufacture as per BIS:12592 (Part 1&2), supply and delivery of HD-10 with 560 mm dia. clear opening manhole covers and frames with ISI marking including, loading, transportation, un-loading and stacking at site, all incidental charges etc., complete.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded door frame section of size 45X75 mm with encapsulation of 8 mm rigid layer on all the six surfaces. The door frame will have rebate of 32 mm. The two vertical members are to be joined together with the horizontal member using 8X50 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/ assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum no.s for horizontal member.

Providing and fixing 28 - 30 mm thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3 mm top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Supplying and fixing in position MS Ornamental grills for windows and ventilators or for veranda openings using MS Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) {total three (3) coats} of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of Galvalume puffed panel of thickness 50 mm thick. With top face with 0.35 mm thick galvalume sheet and bottom face of 0.3 mm thick galvalume sheet. The puf material is of 50 mm thick, density 40kg/cum complete as directed during execution Sheet Width: 1.070, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L- Flashing, Down Pipes, Gutter etc., with 0.50 mm thick, Width: 0.585, Length: Maximum 2½ Meters

Supplying and fixing of 550X400 mm - Single CP Pillar cock Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size CP Fitting with parallel pipe thread confirming to IS:29610-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block.

Supply and fixing of 12.70 mm NP long body bib tap Indian make heavy duty 400 grams.

Supply and fixing of 12.70 mm NP angle stop cock Indian make heavy duty

Supply and fixing of 12.70 mm Np two way Bib tap Indian make heavy duty

Supply of SYMET 2 in 1 Faucet (1 mts. Tube) with hook (Prayag make CAT.No:187) as directed during execution.

Supply and fixing SINGLE BOWL stainless steel sink size 24"X18"X8" (609.60X457.20X2,010.20 mm) 1 mm thick with accessories

Supply and fixing of following Premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") SDR 13.5 Pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

-do- 28.60 mm OD pipe SDR - 13.5

-do- 22.20 mm OD pipe SDR - 13.5

UPVC/ SWR Pipe fittings 4" (101.60 mm ) Nahany Trap (Without Jali with inlet)

UPVC/ SWR Pipe fittings Square tile & Jalli

Supply and fixing TV shape mirror with plastic frame size 609.60 mm X 457.20 mm

Supply of following dia PVC/ SWR Pipes 6 Kg/sq.cm. of approved make, including labour charges for laying, jointing, fixing in position and commissioning the PVC Pipes including couplers/ bends/ tees etc., including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice as directed during execution.

- do - 110 mm dia Single socket pipe

- do - 75 mm dia Single socket pipe

Supply of following UV Resistant UPVC/ SWR Pipe fittings (as per BIS standards)

- do - 110 mm dia Door Bend 87.5 Degrees

- do - 110 mm dia Plain Bend 87.5 Degrees

- do - 110 mm dia 45 degree bend

- do - 110 mm dia Coupler

- do - 75 mm dia Door Bend 87.5 Degrees

- do - 75 mm dia Plain Bend 87.5 Degrees

- do - 75 mm dia 45 degree bend

- do - 75 mm dia Coupler

Supply and fixing of European ISI Water Closet of 1st quality conforming to IS:2556 Part-2 1973 of white glazed with P trap with ISI mark or equivalent of approved make by the department.

Supply and fixing of best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 with ISI mark or equivalent of approved make by the department.

Supply and fixing of 10 Litres capacity single Flush PVC low level system with internal components and short bend of ISI mark or equivalent of approved make by the department.

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-3: for width of doors 851 to 1,000 mm)

Supply of following Anodized Aluminum fixtures for doors and windows of approved make by the department

- do - Tower Bolts 10 mm dia X 250 mm long with ISI Mark IS:204

- do - Tower bolts 10 mm X 150 mm long with ISI Mark IS 204

- do - Aldrops (IS 2681) 16 mm rod and 300 mm long make

- do - Door Handles (IS:208) with 150 mm long.

- do - Heavy Duty Alluminium Door stopper

Supply and fixing towel rod (CP) of 24" long and 3/4" dia of approved make by department.

Supply and fixing of NP Soap dish heavy type with NP Screws of approved make.