Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.1 LAccepted-AOC V P O KOTLA KALAN TEHSIL DISTT UNA H P | UNA | HIMACHAL PRADESH | 174301 | ₹1.1 L Quoted ₹1.9 L | 1 | Accepted-AOC Accept |
| 2 | 2₹2.1 L+₹13,050 (6.78%)Rejected-AOC AT GROUND FLOOR MAIN BAZAAR MEHRE TEHSIL BARSAR DISTT HAMIRPUR H P PIN CODE 174305 | HAMIRPUR | HIMACHAL PRADESH | 174305 | ₹2.1 L+₹13,050 (6.78%) | 2 | Rejected-AOC Reject |
| 3 | 3₹2.1 L+₹19,180 (9.96%)Rejected-AOC | ₹2.1 L+₹19,180 (9.96%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | Balwant Kumar L1 | VIKASH RANA L3 | RAVI KUMAR L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (for pipe and pits) up to all depth and in all kind of soil such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting in soft / hard rock, chiseling / wedging out of same where blasting is prohibited in all lead and lift including trimming and dressing of side, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering where ever required, stacking the usable and unusable and un-usable materials/soil separately and after laying, jointing and testing of pipes, returning the useful soil trenches in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil/unusable materials as directed with in all leads/lifts including restoration of unmetered/unmetered surfaces to its original conditions and including cost of diversion of traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lift as per direction of Engineer-in-charge. | 27 | Cum | 400 ₹10,800 Lowest | 500 ₹13,500 | 450 ₹12,150 |
| 2.00Providing circumferencial Butt welded joints by electrical arc welding to following dia MSERW/API/GMS pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. | ||||||
| 2.01 | 250 mm dia | 30 | No | 2,200 ₹66,000 Lowest | 2,323 ₹69,690 | 2,300 ₹69,000 |
| 2.02 | 150 mm dia | 25 | No | 1,300 ₹32,500 Lowest | 1,414 ₹35,350 | 1,400 ₹35,000 |
| 2.03 | 80 mm dia | 40 | No | 700 ₹28,000 Lowest | 777 ₹31,080 | 750 ₹30,000 |
| 2.04 | 65 mm dia | 45 | No | 600 ₹27,000 Lowest | 666 ₹29,970 | 650 ₹29,250 |
| 2.05 | 50 mm dia | 25 | No | 600 ₹15,000 Lowest | 666 ₹16,650 | 650 ₹16,250 |
| 2.06 | 40 mm dia | 35 | No | 380 ₹13,300 Lowest | 444 ₹15,540 | 400 ₹14,000 |
Tender Value
₹2.0 L
EMD Value
₹3,910
Closing Date
12 Feb 2026, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
Deposit work BSP 2024 102 WSS Seoh Sub Division Dharampur in Tehsil Dharampur Distt. Mandi HP
2026_HPIPH_127342_1
12891-12940 Dated 03-02-2026
Open Tender
Civil Works
Item Rate
30 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹3,910
19 May 2026
3 Feb 2026
13 Feb 2026
3 Feb 2026
12 Feb 2026
3 Feb 2026
Excavation in foundation and trenches etc. (for pipe and pits) up to all depth and in all kind of soil such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting in soft / hard rock, chiseling / wedging out of same where blasting is prohibited in all lead and lift including trimming and dressing of side, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering where ever required, stacking the usable and unusable and un-usable materials/soil separately and after laying, jointing and testing of pipes, returning the useful soil trenches in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil/unusable materials as directed with in all leads/lifts including restoration of unmetered/unmetered surfaces to its original conditions and including cost of diversion of traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lift as per direction of Engineer-in-charge.
Providing circumferencial Butt welded joints by electrical arc welding to following dia MSERW/API/GMS pipe, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge.
250 mm dia
150 mm dia
80 mm dia
65 mm dia
50 mm dia
40 mm dia
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
Form6.pdf
Tender Documents • 0.82 MB
Form8.pdf
Tender Documents • 1.28 MB
TC.pdf
Tender Documents • 0.13 MB
BOQ_188016.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .