ADDN ALTN TO OR COOK HOUSE DY 67 AND CERTAIN OTHER SANCTIONED WORKS AT ALHILAL MIL STN UNDER GE PALAMPUR

Amount

Dismantling of plain or corrugated sheeting anygauge,thickness,including Nainital or similar pattern roof covering etc complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified.

Dismantling timber scantling 40 sq cm & over in section , any position in unframed work.

S&F mild steel Roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. ade Fe 410-W (Grade E-250) complete all as specified and directed,

S&F plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed.

M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L Preparing old surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets of any thickness, including cover fillets complete all as specified and directed.

S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick,1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, 600mm secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI sloted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttrtfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed.measured and paid separately.

Demolition of brick work or stone /boulder masonry, built in CM, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified.

M&L Walling of random rubble stone masonry uncoursed, brought up to course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6 etc, complete all as specified

All as per Srl item No. 13 here-in-above but except stone. Note: Old stone obtained against dismantling/demolition shall be used.

Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) complete all as specified and directed.

M&L Plain cement concrete, M-10 (Nominal Mix) type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed..

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

M&L 50mm thick, PCC M-10 (Nominal Mix), type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed .

Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc, complete all as spfd and directed.

M&L Rendering 15 mm thick on stone masonry or other than fair faces of brick wall in CM 1:4 finished even and fair without using extra cement, complete all as spfd and directed.

M&L Rendering 10 mm thick on brick/stone masonry or other than fair faces of brick wall in CM 1:6 finished even and fair without using extra cement, complete all as spfd and directed.

M & L for peparation of newly plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty of 1 mm thickness over newly plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

M & L for peparation of old plastered or unplastered surfaces of walls and applying two coats of distempering walls with distemper oil emulsion and applying plaster of paris putty of 1 mm thickness over plastered wall surfaces including preparation of surfaces even and smooth complete all as specified and directed.

Material & Labour for applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new plaster surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Material & Labour for applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 :2004, Alkali & fungal resistance dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old plaster surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames incl shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed.

Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed.

S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.

S & F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones(fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F 2nd class HW (Sal / Hollock) factory made, plain framed, panelled shutters (two panels) 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick fitted to chowkats, complete all as spfd and directed.

S&F 2nd class HW (Sal / Hollock) factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass or gauge, etc. (w/o sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutters S&F to chowkats, complete all as spfd and directed.

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples complete all as specified and directed.

M & L Prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay dovtailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. complete all as specified and as directed.

M&L powder coated aluminium frame for doors, windows, ventilators with one or more rebates.including joing cleats for fixing etc complete all as specified and directed.

S & F powder coated aluminium door shutters, (thickness not less than 50 micron) aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L Sheet glass, 4mm thick ordinary quality and glazing with oil putty in square exc 0.5 sqm complete all as spfd and as directed

S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises complete all as specified and directed.

M&L joint free coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/450 x 350x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L for Non skid joint free (edge cut) coloured/ digital ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exc .18 sqm but not exc .38 as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed.

M & L coloured tiles of size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed

M & L for granite (of any size) tile 18 to 20 mm thick machine cut bedded and jointed grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and including 15 mm thick screed bed in CM 1:6 and grinding and polishing complete all as directed by Engineer-in-Charge.

M & L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed

S&F sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as directed by Engineer-in-Charge. Make Blue Star,Nirali,Paryag/Equivalant

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F in repair CP Swan Neck type Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed complete all as spfd and directed

S&F bib taps 15mm bore cast copper alloy fancy type with crutch or butterfly, handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F towel rail, 600 mm long of PTMT fixed with and including, CP brass screw and wooden/ plastic cleats (Min wt 190 gms) ,complete all as spfd and directed.

S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches etc , complete all as specified and directed.

S & F 110 mm bore PVC Bends (SWR) complete all as specified and directed.

S & F PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement complete all as specified and directed.

Disconnecting existing 1000 ltr capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.(Cleaning repairing, etc. measured separately) and fixed in position as directed complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.

S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogavanised, width of flaps (when open) 40mm as specified all as directed by Engineer-In Charge.

M & L Prelaminated particle board of thickness 18 to 19 mm, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed by Engineer-in-Charge.

S&F 25 mm Stainless Steel drapery rod with a pair of stainless stell coated M S clamp to hold drapery rod and decorative attachment at one or both ends of drapery rod fixed in opening door/window (each opening n exc 1.50m contained with a pair of clamps and a pair of side ornament attachments) complete all as specified and as directed.

M&L three coats of white wash on newly/old plastered wall surfaces including preparation of surfaces complete all as spfd and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fiixed in wood or steel/Aluminium frame of any description complete all as specifed.

Prepartion of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

S&F Steel ventilator with top hung shutter incl hinges, steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.

S&F Butt hinges, extruded alu- minium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-2, 100mm long, complete all as specified and directed.

S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.

M & L Colour chequered cement concrete tiles, machine pressed, factory made of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as spfd and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed.

Dismantling of 75 / 100 mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors etc, complete all as specified and directed.

S & F 75 mm bore PVC Bends (SWR) complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (single T) complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction, (single T) with oval access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, (double T) with oval access door complete all as specified and directed.

M&L 125/110mm dia PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed .

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling old cemented/asbestos water/PVC storage tank complete all as specified and directed.

S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'S' trap,setting trap and pan in lime concrete and jointing to flush pipe complete all as specified and directed.

S&F Vitreous China wash down water closet pan Europian type (pedestal pattern), connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one all as specified and as directed.

S&F 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed.

S&F vitreous china Urinal half stall type white with spreader etc, complete including making good. complete all as specified and directed by Engineer-in-Charge.

S&F oval (of any colour as directed) counter wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F waste pipe of polyethylene of low or high density of PVC, 32 mm dia, specified all as directed by Engineer-In Charge.

S&F PVC Connections 15 mm size with PTMT nuts of length 600mm complete all as specified.

S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 cm long all as specified.

M & L granite (of any size) tile 18 to 20 mm thick machine cut bedded and jointed grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and including 15 mm thick screed bed in CM 1:6 and grinding and polishing complete all as directed by Engineer-in-Charge.

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engineer-in-Charge.

S&F CP Swan Neck type Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed complete all as spfd and directed

S&F CP jet spray hygenic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed

S&F 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete complete all as specified and directed.

S&F CP with long shank and cup (concealed type) fancy type 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 20 mm Gun metal Gate valves fitted for iron pipe complete all as specified.

S&F swivel shower along with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms each) complete All as specified and as directed.

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc. 20 cm girth complete all as specified and directed.

S&F wooden lipping specified and directed by Engineer-in-Charge.

M&L magnetic catcher min 50mm size, complete all as spfd and directed

S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m in hard/dense soil and making good surface complete all as specified and directed

M&L Plain cement concrete, Type C2, 1:3:6 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

S&F 100mm Double action spring door closer, mild steel with steel wire spring, for urinal complete all as spfd and directed

M&L surface excavation n.exc. 30 cm deep and averaging 15 cm deep & getting out in soft/loose soil.completed all as specified & directed.

M&L 150mm thick hardcore of gauge not exc 63mm, deposited, spread and levelled in layer not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc. complete all as specified and directed.

M&L 150mm thick Cement concrete Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less as in floor etc, complete all as specified and directed by Engineer in Charge.

Finishing surface of concrete , by brooming complete all as specified and directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, with sealing compond grade 'B' complete all as specified and directed by Engr-in- charge.

M & L Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed by Engr-in- charge.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, fan regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid Concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including bends, cross, elbows tees etc of suitable size including concealed MS pressed steel (Modular sunken box) terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and Modular cover plate as top cover (ISI marked) including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multi stranded cable for continuous earth conductor connected to common arth dolly , complete all as specifid and directed for the following :- Note- (a) Proper colour coding is to be followed as per IS specification. (b) Point wiring considered for Modular switches and sockets, rate of metallic sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. (c) Rate of modular switch and sockets will be paid seperately under relevant item.

One light controlled by one switch 5 Amp , SP , one way 240 volts

One Ceiling /Exhaust fan point controlled by one switch SP , one way, 5 Amp , 240 volts.

One multi pin socket outlet 5 amp independent .

One multi pin socket outlet 5 amp same board .

All as per the description of Serial Item No. 70 above but using 2.5 sqmm (nominal area) multistranded copper conductor cable & 2.5 sqmm size PVC insulated FRLS and unsheathed copper conductor cable FRLS for earth continuity (green colour) for one 3 pin socket outlet 15 Amp multipurpose independent point controlled by 16 Amps switch ,SP ,one way ,240 volts for socket ,complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F Modular Switch one way 16 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F modular type fan step regulator 120w two module complete all as specified and directed.

Taking down unsv ceiling fan, Supply and Fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC), incl U clamp complete with making hanging arrangement for ceiling fan with nut bolt washer, split pin connected with proper angle/GI pipe for hanging ceiling fan etc complete all as specified and directed. Note- old unsv ceiling fan to be deposited in MES store yard.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.

S&F LED Bulb 09/10 watt with provision of fixed in Lamp holder complete all as specified and directed.

S&F in replacement of existing worn out ceiling light with enviromental friendly, new generation, aesthetically designed, ultra modern recessed mounted LED light luminaries of size 595 mm x 595 mm(2'x2') an independent Isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage - 36/40/42 Watt, Lumen out put- 4000-4300 Lm, THD < 10%, PF > 0.9, having short circuit and surge protection suitable for Armstrong/ Grid ceiling with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mt fixed to wall with 02 Nos Fl clamps made of 40 x 5 mm Fl, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including rend length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer , 63 Amp, 4 pole & including MCCB 63A 4 pole 16KA complete(when MCB's are to be used) with suitable size of bus bar complete fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-charge at site.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F, MCB SP 240 volts, 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Taking down old unserviceable electric water geyser, S&F new electric storage Heater (vertical type Geysers) 25 Ltrs BEE RATING 5 STAR, 230 volts AC single phase with and including grouting with high tensile rag bolt, nut & washer etc as directed as per site requirement and making necessary inlet / outlet water connection for Geysers. Geysers to have glass lines tank, fero glass coated container, PUF insulation, glass coated heating element, thermostat cut off etc. complete all as specified and as directed. (Note-: Old UNSV electric water heater to be deposited in MES store yard)

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts, 10 KA complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML. No) not less than 25 mm dia confirming to IS 14930 (Part-1) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqrım FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upilo DB complete all as specified and directed (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

Taking down unserviceable exhaust fan , S&F Exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers energy saving including cutting of wall all as specified and directed by Engr - in - Charge.

S&F Exhaust fan made of sturdy Engineering plastic complete, AC single phase, 230V of size 250 mm sweep with blades, and frame and Louvers, energy saving including cutting of wall all as specified and directed by Engr - in - Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 Sqmm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 08 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

Supply, laying and testing cable XLPE insulated screend PVC bedded, galvanised steel strip or wire armoured electric power cables (Heavy duty) 1100 V grade with stranded aluminium conductor of size 16 sqmm x 4 Core, laid in trenches or passing through pipe including taking down of existing cable/service connection of any type or size and removing from site to MES store for reuse if serviceable or for credit all as specified and directed and directed by Engr-In-Charge.

Supply, laying and testing cable XLPE insulated screend PVC bedded, galvanised steel strip or wire armoured electric power cables (Heavy duty) 1100 V grade with stranded aluminium conductor of size 25 sqmm x 4 Core, laid in trenches or passing through pipe including taking down of existing cable/service connection of any type or size and removing from site to MES store for reuse if serviceable or for credit all as specified and directed and directed by Engr-In-Charge.

Excavation in trenches not exceeding 1.5 m width and not exceeding 1.5 m depth and getting out for laying of pipe etc in any type of soil complete all as specified and directed.

Returning, filling of excavated soil, including spreading levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the strating point in soft/loose soil complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

Brick, old size sub class 'B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

S&F tube light grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

S&F tube medium grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.

S&F in repair 25 mm bore gun metal, gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe complete including taking out old un-serviceable one all as specified and directed.

M&L construction of valve pit of inner sizes up to 60 cmx 60cm x 60cm brick masonry construction complete All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil,metal sheet cover with proper angle iron frame and PCC work all as per TD drg complete all as specified and directed.

m t construction co (BID ID -3433796)