WBPWD/AE/NKHESD/NIQ- 46/Q of 24-25

Amount

Dismantling of existing normal/flood lights, loop boxes and allied electrical installations on the bottom/top of the main gate including existing wiring submission of same in the section office.

Supply and delivery of the following cable:-1.1 kv 4 core 35 sqmm Aluminium armoured cable (Power Source for main gate) [Gloster/Polycab/Finolex ] on wall with saddling arrangement

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed( F2,1b)

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting F1,2c

Supplying & fixing 40 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required .F6,11d

Cement Concrete/ Pitch road cutting avg. depth 760 mm x avg. width 460 mm including restoring concrete/pitch mending good damages.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :F5,8b,xv- 4 core 35 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : F4,7c 4core 35 sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required F4,7c 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mm x 100mm x 62.5mm inspection box making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 9 mtr E-15,3a

Average run 12 mtr E-15,3d

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board E-15,4a

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes F5,9-1.5 sqmm

2.5 sqmm F5,9

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required E-6,22

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.E-6,18a

Supply and delivery of Extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) [Make: Philips BN 021 LED12S 6500 PSU GR/CG/Havells]

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. C-2, 14a

Supply & fixing 230V 50Hz 400mm ( 18 inch) sweep heavy duty full metal body /Decorative type wall bracket fan with all accessorieswith necy. bolts & nuts. ( Make- EPC/CG/Orient)

Supply & delivery of 200W highbay range with industry leading efficacy of 150 Lm/W with all necessary accessories [Make: Phillips BY515P LED200S 5700 NB PSU GR/CG/Havells]

Fixing only Highbay light fitting with suitable GI tie clamps and GI plate for mounting on top of the main gate by clasped in intermediate portions of the stucture. (3.5 kg GI,MS tie Approx)

Supply & delivery of 250 V. 100 Wt. LED flood light fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires) incl. fixing the fittings on the top of the pole as per direction of EIC. (Make: Phillips BY225P LED100S CW NB PSU FG GR V1 CG / Havells) as per direction of EIC.

Supply & delivery of 250 V. 100 Wt. LED flood light fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires) incl. fixing the fittings on the top of the pole as per direction of EIC. (Make: Phillips BY225P LED100S CW WB PSU FG GR V1/ CG / Wipro/Lighting Technology) as per direction of EIC.

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.(2.5 kg ,MS pati) approx

Supplying & Fixing PVC waterproof type looping cable box size 150x100x100 mm deep having 4 mm thick comprising of one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted on door cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 25x3 mm thick, GI/ AL clamps with bolts, nuts etc for fixing it as per height mention by EIC. (Sintex or approved make)

Supply and Installation of Hooded type Feeder Piller Box of suitable size with front opening door and locking arrangement made of 5mm M.S plate fixed to be on massonary base as per dirrection of EIC. The box should be comprising of the following accessories as per requirement of load & as per direction of EIC : 1) S & F 240V, 63A , DP MCB Isolator---1no. (Make: Legrand/L&T /Havells) 2) S & F 240V, 6-32A , SP MCB---12 nos. (Make: Legrand/L&T /Havells) 3) S & F double-door SPN MCB Distribution Board with IP-42/43 protection, fixed inside wall of feeder pillar & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4) S & F voltage and current measurement arrangement The complete arrangement must be wiring by suitable size PVC insulated Cu wire/Cu Bar with suitable sockets/lugs etc as per direction of EIC incl Errection of Feeder Piller Box on 10" brick padestal (600mm bellow Goround leveland 600mm above G.L) incl.sand cement plastering and neat cement finishing. Inside the brick padestalwill be filled up by loose sand where the incoming & outgoing cable will be rest.

BAPPA CONSTRUCTION (BID ID -5657442)

S D ENTERPRISE (BID ID -5658489)

NEO ELECTRICALS (BID ID -5645692)