Construction of ITI Boys Hostel (Cap-100) @ Becharaji , Dist-Mehsana

NAME OF WORK:- Construction of ITI Boys Hostel (Cap-100) @ Becharaji , Dist-Mehsana

BILL OF QUANTITY

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

1 2553.40 Excavation for foundation upto 1.5 m depth including 122.99 Rupees One Cmt

sorting out and stacking of useful materials and Hundred Twenty

disposing off the excavated stuff upto 50 Meter Two And Paise

lead.(A) Ninety Nine Only

Loose or soft soil

2 1352.00 Excavation for foundation for depth from 1.5 m to 3.0 170.40 Rupees One Cmt

m including sorting out and stacking of useful Hundred Seventy

materials and disposing off the excavated stuff upto And Paise Forty

50 Meter lead.(B) Dense or Hard soil Only

3 303.00 Filling in plinth with sand under floors including 399.94 Rupees Three Cmt

watering ramming, consolidating and dressing Hundred Ninety

complete Nine And Paise

Ninety Four Only

4 355.00 Providing and laying controlled cement concrete 3788.24 Rupees Three Cmt

M.150 for curing complete excluding cost of Thousand Seven

formwork and reinforcement for reinforced concrete Hundred Eighty

work in (A) Foundations, footings,Base of columns Eight And Paise

and Mass concrete Twenty Four Only

5 550.00 Providing and laying controlled cement concrete M 4517.49 Rupees Four Cmt

250 and curing complete including the cost of form Thousand Five

work but excluding the cost of reinforcement for Hundred

reinforced concrete work in. (A) Foundation footing, Seventeen And

base of columns & mass concrete. Paise Forty Nine

6 105.00 Providing and laying controlled cement concrete M 7643.54 Rupees Seven Cmt

250 using B.T. stone aggregate and curing complete Thousand Six

including the cost of form work but excluding the cost Hundred Forty

of reinforcement for reinforced concrete work in. Three And Paise

Columns up to plinth level. Fifty Four Only

7 284.00 Providing and laying cement concrete 1:3:6 (1- 2968.91 Rupees Two Cmt

Cement : 3- Coarse sand : 6- Graded brick bat Thousand Nine

aggregate 40mm normal size) and curing complete Hundred Sixty

excluding cost of formwork in (A) Foundation and Eight And Paise

Plinth Ninety One Only

8 201.00 Provinding and Laying controlled cement concrete M- 6177.16 Rupees Six Cmt

250 & curing complete including the cost of form work Thousand One

but excluding cost of reinforcement concrete work in Hundred Seventy

Beams, Girders and Cantilever up to floor for PLINTH Seven And Paise

BEAMS Sixteen Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

9 254.00 Brick work using common Brunt clay building bricks 3455.27 Rupees Three Cmt

having crushing strength not less than 35 Kg./Sq.cm.. Thousand Four

In foundation and plinth in cement mortar 1:5 Hundred Fifty

(1cement : 5 fine sand) (b) Conventional Five And Paise

10 2102.00 Filling available excavated earth (excluding rock) in 136.92 Rupees One Cmt

trenches, plinth, sides of foundations etc. in layers not Hundred Thirty

exceeding 20 cm. in depth consolidating each Six And Paise

deposited layer by ramming and watering etc Ninety Two Only

11 744.00 Filling in foundation and plinth with murrum or 269.75 Rupees Two Cmt

selected soil in layers of 20cm. thickness including Hundred Sixty

watering, ramming and consolidating etc. completed. Nine And Paise

12 1068.00 Applying general insecticide pest control treatment to 80.62 Rupees Eighty Smt

floors, cupboards etc including labour material etc. And Paise Sixty

complete. Using Lamidacloprid 30.5 SC. as Per 6113 Two Only

part -II Consentration Weight (0.075% By mass) is

recommended 10.5 ml Chemical diluted with 5 Liters

of water application 0.5 liter chemical/Sqm of surface

is recommended as per IS

13 171.00 Provinding and Laying controlled cement concrete M- 7426.53 Rupees Seven Cmt

200 and with curing etc.complete. Including the cost Thousand Four

of formwork but excluding the cost of reinforcement Hundred Twenty

for R.C.C work in Column heving any cross section Six And Paise

area of Column.For All Floor Column. Fifty Three Only

14 375.00 Provinding and Laying controlled cement concrete M- 6509.45 Rupees Six Cmt

200 and with curing etc.complete. Including the cost Thousand Five

of formwork but excluding the cost of reinforcement Hundred Nine

for R.C.C work in beam heving any cross section area And Paise Forty

of BEAM. For All floor Beam. Five Only

15 39.00 Provinding and Laying controlled cement concrete M- 7610.35 Rupees Seven Cmt

200 and with curing etc.complete. Including the cost Thousand Six

of formwork but excluding the cost of reinforcement Hundred Ten And

for R.C.C work in Lintel. For all floor Lintel. Paise Thirty Five

16 21.00 Provinding and Laying controlled cement concrete M- 7477.03 Rupees Seven Cmt

200 for reinforced concrete chhajja not exceeding Thousand Four

10cm thickness up to floor two level including Hundred Seventy

finishing the exposed surface with cement mortar 1:3 Seven And Paise

( 1 cement : 3 fine sand) to give a smooth surface Three Only

,centering and formwork and curing complete.

excluding cost of reinforcement FOR RCC CHHAJJA

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

17 27.00 Provinding and Laying controlled cement concrete M- 8609.24 Rupees Eight Cmt

200 including finising smooth with curing complete Thousand Six

including the cost of form work but excluding cost of Hundred Nine

reinforcement for reinforced concrete work in And Paise

VARTICAL AND HORIZONTAL FINS/ PADADI For all Twenty Four Only

18 415.00 Providing & laying controlled cement concrete M200 6529.65 Rupees Six Cmt

for curing comp. including cost of form work and Thousand Five

excluding cost of reinforcement for reinforced conrete Hundred Twenty

work in SLAB For All Floor Nine And Paise

Sixty Five Only

19 16.00 Providing and laying Controlled cement concrete M 6489.25 Rupees Six Cmt

200 and curing complete including the cost of form Thousand Four

work but excluding the cost of reinforcement. Hundred Eighty

Staircase All Floor Nine And Paise

Twenty Five Only

20 238880.00 Providing TMT Bar FE 500/500D reinforcement with 86.86 Rupees Eighty Kg

fusion bonded Epoxy coating not less than 175 Six And Paise

micron thickness and up to 300 micron to Eighty Six Only

reinforcement bars as per IS-13620-1993/ASTM-775

M including testing of coating at plant and all taxes

for R.C.C. work including bending, binding and

placing in position complete All floor Level

21 866.00 Brick work using common burnt clay building 3774.37 Rupees Three Cmt

conventional type bricks having crushing strength not Thousand Seven

less than 35 Kg./Sqcm. in super structure in cement Hundred Seventy

mortar 1:5 (1 cement : 5 fine sand) for All floor Four And Paise

including the cost of all materials and labour charges Thirty Seven

22 757.48 Half brick masonry in common brunt clay building 595.90 Rupees Five Smt

bricks having crushing strength not less than 35 Hundred Ninety

Kg./Sq.cm.. In cement mortar 1:4 (1cement : 3 coarse Five And Paise

sand) in super structure above plinth level For All Ninety Only

23 6735.00 Providing 15mm thick MALA Trowelled Finished 212.10 Rupees Two Smt

cement plaster in single coat on brick/concrete walls Hundred Twelve

for interior plastering upto floor two level and finished And Paise Ten

even and smooth in (i) Cement mortar 1:3 (1-cement: Only

3-sand) etc. complete. for All Floor

24 2699.00 Providing 10 mm thick cement plaster in single coat 239.37 Rupees Two Smt

on fair side brick/concrete walls for interior plastering Hundred Thirty

upto floor two level and finished even and smooth in Nine And Paise

cement mortar 1:3 (1 cement : 3 sand) including Thirty Seven

finishing with a floating coat of neat cement slurry etc. Only

complete for Ceiling For All Floor

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

25 320.00 Providing 20 mm thick waterproof cement plaster fo 333.30 Rupees Three Smt

sunk in single coat on bick/concrete walls for interior Hundred Thirty

plastering finished even and smooth in cement mortar Three And Paise

1:3 (1 cement : 3 sand) and mixing water proofing Thirty Only

materials of approved brand and manufacture in C.M.

in proportion recommnded by the manufacture and

finished with a floating coat of neat cement slurry for

26 4123.00 Providing 20 mm thick sand faced cement plaster 321.10 Rupees Three Smt

With Gutka Finishon walls for all height above ground Hundred Twenty

level consisting of 12mm thick backing coat of One And Paise

cement mortar 1:3 (1 cement : 3 sand) and 8mm thick Ten Only

finishing coat of C.M. 1:1 (1 cement : 1 sand)

including making necessary cornices as directed etc.

complete.For all heights

27 600.00 Providing throating or Plaster drip and moulding to 43.05 Rupees Forty Rmt

RCC Chhjja. Three And Paise

28 1892.00 Providing 12mm wide groove/notch in plaster 22.22 Rupees Twenty Rmt

including finishing the same etc.complete for all Two And Paise

height. Twenty Two Only

29 6.00 Providing and fixing door Double shutter having 8969.81 Rupees Eight Smt

factory fabricated std. Extruded aluminium colour Thousand Nine

anodized hollow section19552 weight is not less than Hundred Sixty

1.1 kg/mtr {Section 63.50 x 38 mm x 2.50 mm thick } Nine And Paise

for door frame, hollow portion of door frame shall be Eighty One Only

filled with wood to be insert for durable grip of door

hinges, with factory made 38 mm.thick Double

Shutter Pivoted flush door With Floor Spring with

both side pre 1mm laminated sheet with 6 Lever

Mortice lock, SS Aldrop 30cm long, SS Handle size

60 Cm Long, Tower Bolt size 20 cm etc. as per detail

colour & pattern apporoved by this office including

necessary anodized alluminum fixtures and

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

30 163.00 Providing and fixing Double Shutter Door Having 6455.92 Rupees Six Smt

Extruded aluminium colour anodized hollow Thousand Four

section19552 weight is not less than 1.1 kg/mtr Hundred Fifty

{Section 63.50 x 38 mm x 2.50 mm thick } for door Five And Paise

frame, hollow portion of door frame shall be filled with Ninety Two Only

wood to be insert for durable grip of door hinges, With

All Open Edges Machine Cut & Machine Polished,

Fixed By Zinc Coated Hinges With Double Shutter Of

Factory Made & Stamped I.S 12823 Grade One, Type

One 35 Mm Thick Solid Core, Melamine Faced,

Three Layered Resin, Flushed Door, Having

Decorative Lamination On Both Sides & 12 Mm Th

Tiw. Beading Fixed Around The Door, Fro as per

detail colour & pattern apporoved by this office

including necessary anodized alluminum fixtures and

31 38.00 Providing and fixing door Single shutter having 5737.81 Rupees Five Smt

factory fabricated std. Extruded aluminium colour Thousand Seven

anodized hollow section19552 weight is not less than Hundred Thirty

1.1 kg/mtr {Section 63.50 x 38 mm x 2.50 mm thick } Seven And Paise

for door frame, hollow portion of door frame shall be Eighty One Only

filled with wood to be insert for durable grip of door

hinges, Machine Cut & Machine Polished, Fixed By

Zing Coated Hinges With Single Shutter Of Factory

Made & Stamped I.S 12823 Grade One, Type One

Mm Thick Solid Core, Melamine Faced, Three

Layered Resin, Flushed Door, Having Decorative

Lamination On Both Sides & 12 Mm Th T.W. Beading

Fixed Around The Door, From "Novapan" Or

Equivalent Company Holding Licence For Minimum

Years. as per detail colour & pattern apporoved by

this office including necessary anodized alluminum

fixtures and fastenings.

32 48.00 Providing and fixing FRP frame size 125x65 mm and 2615.04 Rupees Two Smt

35mm thick FRP depress panel shutter having extra Thousand Six

reinforcement on sides & edges in Gel coat finish. Hundred Fifteen

The core of the shutter & frame is to be filed up with And Paise Four

injected fire retardant grade polyurethene foam done Only

in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole

FRP frame & shutter is to be water proof weather

proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings

& fastener sleeve.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

33 20.00 Providing and fixing Three Shutters Slinding Window 5171.20 Rupees Five sqmt

(3 Shutter+1 mosquit Net Shutter) having Standard Thousand One

Extruded Colour Anodized Alluminium Section Hundred Seventy

Equivalent To Jindal Series E (30mm) Sections One And Paise

Numbered: Frame-Bottom With Weep Holes- 20928, Twenty Only

Frame Top & Side - 20837; Shutter Top & Bottom-

20993, Shutter Inter Lock - 20550, Shutter Side

(Handle) - 20549, With 5 Mm Thick Transparent

Tinted Float Glass, With Epdm Rubber Gasket, Air

Lock Strip And Finishing Joints With Silicon Sealant,

With Powder Coated Standard Alluminium Fittings

With Mosquito Net Provision as per details etc

34 221.00 Providing and fixing Three Shutters Slinding Window 5505.51 Rupees Five Smt

(2 Shutter+1 mosquit Net Shutter) having Standard Thousand Five

Extruded Colour Anodized Alluminium Section Hundred Five

Equivalent To Jindal Series E (30mm) Sections And Paise Fifty

Numbered: Frame-Bottom With Weep Holes- 20928, One Only

Frame Top & Side - 20837; Shutter Top & Bottom-

20993, Shutter Inter Lock - 20550, Shutter Side

(Handle) - 20549, With 5 Mm Thick Transparent

Tinted Float Glass, With Epdm Rubber Gasket, Air

Lock Strip And Finishing Joints With Silicon Sealant,

With Powder Coated Standard Alluminium Fittings

With Mosquito Net Provision as per details etc

35 32.00 Providing and fixing standared extruded of aluminum 1175.56 Rupees One Smt

section of size 63mm x 38.10mm x 1.2mm (of Jindal Thousand One

Section no:2434@ wt. of 0.643 kg/mt), with colour Hundred Seventy

Powder coated alluminium frame ventilation with Five And Paise

5mm thick frosted glass as details etc. complete for Fifty Six Only

36 605.00 Providing and Fixing Machine Cut free edges,Pre 2100.80 Rupees Two Smt

Mirror Polished Green Marble Stone slab 16mm to Thousand One

18 mm thick in single peace) for For Doors & Hundred And

windows sill,jambs & Cledding as per design incl. full Paise Eighty Only

moulded round front edge and 1cm both side nosing

on 20 mm thick cement mortar 1:6 (1 -cement :

coarse sand) jointed with grey cement slurry

including rubbing, polishing & Finishing etc.

37 21240.00 Providing and fixing safety grills of Required pattern 113.12 Rupees One Kg

for Windows,Door using required size of MS polished Hundred Thirteen

bars at specified spacing innserted and welded from And Paise Twelve

inside to rectangular box type frame CRC Pipes of Only

Required Size at required spacing as per design and

hold fasting with coach bolts including one coat of

primer and two coats of mattfinished oil painting etc

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

38 112.00 Providing and laying Machine Cut free edges, 2223.01 Rupees Two Smt

Machine polished Granite Stone slab 18 mm thick Thousand Two

single peace For Stair,Steps,landing as per design Hundred Twenty

incl. full moulded round front edge and 1cm nosing Three And Paise

and necessary groove on trade of steps laid on 20 One Only

mm thick cement mortar 1:6 (1 -cement : 6 coarse

sand ) jointed with grey cement slurry including

rubbing,polishing & Finishing etc. complete

39 1909.00 Providing and laying Mirror Polished Blue Kota stone 1019.00 Rupees One Smt

slab 25mm thick flooring over 20mm (Average) thick Thousand

base of cement mortar 1:6 (1-cement : 6-coarse Nineteen Only

sand) or L.M. 1:1.5 and laid over and jointed with

grey cement slurry including rubbing and Mirror

polishing with emery stone No 600 etc. complete.(A)

40 149.00 Providing and laying Mirror Polished Blue Kota stone 1166.93 Rupees One Smt

slab 25mm thick Risers of Steps. dedo and pillars Thousand One

laid on 10mm thick Cement Mortar 1: 3 (1-cement : 3- Hundred Sixty

coarse sand) and jointed with grey cement slurry Six And Paise

including rubbing and semi mirror polishing with Ninety Three

emery stone No.600. complete.(A) 25mm thick Only

41 239.00 Providing and laying 60 cm X 60 cm 8 mm thick 1351.38 Rupees One Smt

MATT FINISH Cermic Tiles in flooring treads of steps Thousand Three

and landing laid over 20mm (Average) thick base of Hundred Fifty

cement mortar 1:6 (1-cement : 6-coarse sand) laid One And Paise

over and jointed with white cement slurry incluiding Thirty Eight Only

finishing with flush pointing and cleaning the surface

42 1073.00 Providing and laying 30 cm X 60 cm 8 mm thick 1559.44 Rupees One Sqmt

Glazed Tiles Tiles in skirting, risers of steps and dedo Thousand Five

on 10mm thick cement plaster 1:3 (1-cement : 3- Hundred Fifty

coarse sand) and jointed with white cement slurry. Nine And Paise

Forty Four Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

43 964.00 Providing and laying water proofing tretment with 1079.65 Rupees One Smt

chaina mosaic tiles flooring over avg 40 mm C.C. Thousand

1:2:4 {1 Cement : 2 sand : 4 Kapachi / Gritt 6 to 12 Seventy Nine

mm size} bedding for maintaining slope for plain and And Paise Sixty

curve surface & 12 mm to 20 mm of broken piece of Five Only

seramic / glazed tiles ( one for more color as directed

) to be laid over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) containg one Kg of water profing

materials per bag of O P C at plain or / and slops and

to be tempered to bring mortar eramic up to surface

with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm

along the wall and curing with bends any pattens or

design as per drawing and cleaning by using oxalic

acid etc complete.

44 17.00 Providing and laying Both Side machine Double Side 2201.80 Rupees Two Smt

Polished Granite Stone slab 18 mm thick average Thousand Two

thick of approved quality incl. full moulded round Hundred One

front edge fixed in wall for Partition and jointed with And Paise Eighty

white cement slurry including rubbing,polishing & Only

Finishing etc. complete

45 6587.00 Wall painting (Two coats) with plastic emulsion paint 123.56 Rupees One Smt

of approved brand and manufacture on undecorated Hundred Twenty

wall surface to give an even shade including Three And Paise

throughly brushing the surface free from mortar Fifty Six Only

droppings and other foreign matter and sand papered

smooth. including Applying two coats of Birla or

Asian acrylic lapy ( putty) & two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

46 2638.00 Wall painting (Two coats) with plastic emulsion paint 129.06 Rupees One Smt

of approved brand and manufacture on undecorated Hundred Twenty

wall surface to give an even shade including Nine And Paise

throughly brushing the surface free from mortar Six Only

droppings and other foreign matter and sand papered

smooth. including Applying two coats of Birla or

Asian acrylic lapy ( putty) & two coats of primer of

approved brand and manufacture on new wall

surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth. on

ceiling and Soffits s of slab

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

47 2563.00 Wall painting two coats with weather proof acralic 73.75 Rupees Seventy Smt

emulsion APEX type paint of approved brand & Three And Paise

manufacture and of required shade on exterior wall Seventy Five

surface to give an even shade over and including a Only

primery coat with alkaly resistance primer of approved

brand after throughly brushing surface to remove all

dirt and remains of loose powdered materials etc

comp. for all height.

48 296.00 Providing and fixing 90 cm high Stainless steel railing 3164.33 Rupees Three Rmt

304 Grade made from anticorrocive S S pipe of 50 Thousand One

mm dia (16Gauge) as hand rail with S S 32 mm dia Hundred Sixty

(16Gauge) as a vertical support fixed in RCC slab at Four And Paise

1.2m c/c including three horizontal S S pipes of 16 Thirty Three Only

mm dia (16Gauge) at eqal distance fixed by

mm dia (16Gauge) S S pipe including accessories as

per detailed drawing as directed etc. complete.

49 850.00 Providing laying and jointing in true line and level 148.12 Rupees One Rmt

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Hundred Forty

including fittings as approved by Engineer In Charge. Eight And Paise

Pipe shall be fixed on the wall with the help of clamp Twelve Only

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

50 500.00 Providing laying and jointing in true line and level 91.84 Rupees Ninety Rmt

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water One And Paise

including fittings as approved by Engineer In Charge. Eighty Four Only

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

51 200.00 Providing laying and jointing in true line and level 72.65 Rupees Seventy Rmt

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water Two And Paise

including fittings as approved by Engineer In Charge. Sixty Five Only

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

52 135.00 Providing and fixing concealed center point to wall 170.36 Rupees One Rmt

ceiling & floor CPVC (SDR 13.5) PIPE having Hundred Seventy

National Sanitation Foundation (NSF) seal for potable And Paise Thirty

water of following dia. nominal bore tube fittings and Six Only

clamps including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.

53 210.00 Providing and fixing concealed center point to wall 253.82 Rupees Two Rmt

ceiling & floor CPVC (SDR 13.5) PIPE having Hundred Fifty

National Sanitation Foundation (NSF) seal for potable Three And Paise

water of following dia. nominal bore tube fittings and Eighty Two Only

clamps including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.

54 180.00 Providing and fixing concealed center point to wall 447.72 Rupees Four Rmt

ceiling & floor CPVC (SDR 13.5) PIPE having Hundred Forty

National Sanitation Foundation (NSF) seal for potable Seven And Paise

water of following dia. nominal bore tube fittings and Seventy Two

clamps including making good the wall, ceiling and Only

floor etc. complete. [E] 40mm.

55 120.00 Providing and fixing concealed center point to wall 660.58 Rupees Six Rmt

ceiling & floor CPVC (SDR 13.5) PIPE having Hundred Sixty

National Sanitation Foundation (NSF) seal for potable And Paise Fifty

water of following dia. nominal bore tube fittings and Eight Only

clamps including making good the wall, ceiling and

floor etc. complete. [F] 50mm.

56 45.00 Providing and fixing PVC SWR Nahni trap IS 14735 574.06 Rupees Five Nos

for drain - 75 mm diameter with jali of the following Hundred Seventy

nominal diameter of self cleansing design with C.I Four And Paise

scread down or hinged grating including the cost of Six Only

cutting and making good the walls.

57 10.00 Providing and fixing S.W. gully trap with C.I. grating 1246.92 Rupees One Nos

brick masonary chamber and water tight C.I. cover Thousand Two

with frames of 300mm x 300mm size (Indian) with Hundred Forty

standard weight (i) square mouth traps (ii) 150mm x Six And Paise

100mm size 'P' or R type. Ninety Two Only

58 90.00 Providing and fixing screw down bib taps of following 186.83 Rupees One Nos

size.(A) Brass screw down bib tap polished Hundred Eighty

bright. (i) 15mm dia. Six And Paise

59 60.00 Providing and fixing chromium plated brass half trun 263.77 Rupees Two Nos

type Flush cock of approved quality including fixing in Hundred Sixty

pipe line etc. complete. Three And Paise

.(ii) 25mm dia. Seventy Seven

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

60 20.00 Providing and fixing Table top wash basin of Size 9532.38 Rupees Nine Nos

610x450mm (Brand Varmora or equivalent) with C.P. Thousand Five

brass waste for washbasin or sink. & 32mm pillar tap, Hundred Thirty

Bottal trap capstan head, screw down high pressure Two And Paise

with screws, shanks and back nuts. (i) 32mm dia. Thirty Eight Only

Providing and fixing brass screw down stop tap. (A)

61 6.00 Providing & Fixing stainless steel sink Glossy ASIS 2445.21 Rupees Two Nos

304 Grade and 1 mm thick with with over all size Thousand Four

610x460 mm & bowl size 560x410x200 of Nirali brand Hundred Forty

or Equivalent with all fitting C I Or M.S Brackets Five And Paise

painted white /or fixing on stone base including Twenty One Only

cutting holes and making good the same brass wastw

and M I fisher union fitting including all necessary

62 10.00 Providing and fixing water closet squatting pan ( 1373.73 Rupees One Nos

Indian type W.C. Pan of Hindustan, Cera, Thousand Three

Parrywareor, hindware,) or equivalent size 580 mm Hundred Seventy

including 100mm size P or S trap for water closet Three And Paise

squatting pan including jointing the trap with the pan Seventy Three

and soil pipe in cement mortar 1:1 etc.complete. Only

63 10.00 Providing and fixing wash down water closet (Wall 7825.48 Rupees Seven Nos

Hung W.C. Pan) with integral P or S trap and PVC Thousand Eight

dual flush tank with complete fittings including cutting Hundred Twenty

holes in walls and making good the same connecting Five And Paise

the flush bend with cistern and closet etc. complete Forty Eight Only

including plastic seat cover and including jointing trap

with Waste pipe overall size as per the selection of

the Model by E.I.C. or as approved}

64 9.00 Providing and fixing Wall Hung fitting for urinal 10089.90 Rupees Ten Nos

approoved quality including Concealed inlet and Thousand Eighty

outlet better hygiene conection the urinal with waste Nine And Paise

pipe tap etc complete. (A) White earthenware flat Ninety Only

back or corner type size of size 350 x 340 x 615 mm

of y including fixing of CP brass waste pipe & 15mm

brass stop tap including cost of all materials & labour

charges etc. comp (Cera cat-S4020113) or

equivalent. (M.R)

65 24000.00 Providing erecting and fixing Three Layer And 10 year 9.09 Rupees Nine And litr

Warranty syntex Astral or equivalent PVC(ISI) mark Paise Nine Only

water tank of required capacity each with all

necessary fittings and connection etc.complete on

66 20.00 Providing and fixing 600 mm x 450 mm beveled edge 859.41 Rupees Eight Nos

mirror of superior glass mounted on 6 mm thick A.C Hundred Fifty

sheet or plywood sheet or PVC framing and fixed to Nine And Paise

wooden plugs with C.P. brass screw and washers. Forty One Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

67 36.00 Providing and fixing C.P. brass towel rail complete 616.42 Rupees Six Nos

with C.P. brass brackets fixed to wooden plugs with Hundred Sixteen

C.P. brass screws (B) 600 mm X 20mm size.. And Paise Forty

68 36.00 Providing and fixing 600mm x 120mm glass shelves 586.09 Rupees Five Nos

with C P Brass brackets and guard rail complete fixed Hundred Eighty

to wooden plug with CP Brass screw.etc.complete. Six And Paise

69 18.00 Providing and fixing Gun metal check or non-return 420.63 Rupees Four Nos

fullway wheel valve.(E) 25 mm dia. Hundred Twenty

And Paise Sixty

70 18.00 Providing and fixing Gun metal check or non-return 663.43 Rupees Six Nos

fullway wheel valve.(E) 40mm dia. Hundred Sixty

Three And Paise

Forty Three Only

71 225.00 Providing, laying and jointing in true line and level 110 876.11 Rupees Eight Rmt

diametre U.P.V.C (Type B) SWR conforming to IS Hundred Seventy

13592-1992 with one end plain and other end Six And Paise

socketed with rubber ring, & fittings conforming to ISI Eleven Only

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all

72 641.00 Providing and fixing to wall ceiling and floor 10.0 Kg. 339.05 Rupees Three Rmt

F/Cm2 working pressure poluthene pipes of the Hundred Thirty

following outside Dia. Low densidy, complete with Nine And Paise

special falnge compression type fittings, wall clipsetc. Five Only

including making good the wall ceiling and

floor.(G)110 mm

73 9.00 Provinding and Fixing in position cowel vent to pipe 393.04 Rupees Three Nos

75mm dia as directed. Hundred Ninety

Three And Paise

74 6.00 Provinding and Fixing in position cowel vent to pipe 505.17 Rupees Five Nos

100mm dia as directed. Hundred Five

75 350.00 Providing laying (to level or slopes) and jointing 677.90 Rupees Six Rmt

reinforced concrete Light duty non-pressure pipes I.S. Hundred Seventy

class NP2 of the following internal diameter with Seven And Paise

collars and butt ends prepared for collar joints Ninety Only

including testing of joints complete.(B)

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

76 32.00 Constructing brick masonry chamber for underground 2932.93 Rupees Two Nos

C.I. Inspection chamber and bends with briocks Thousand Nine

having croshing strength not less than 35Kg. Cm2 in Hundred Thirty

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x Two And Paise

610mm intenal dimensions total weight of cover with Ninety Three

frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

77 16.00 Constructing brick masonry chamber for underground 3660.76 Rupees Three Nos

C.I. Inspection chamber and bends with briocks Thousand Six

having croshing strength not less than 35Kg. Cm2 in Hundred Sixty

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x And Paise

610mm intenal dimensions total weight of cover with Seventy Six Only

frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4

mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside

dimensions 500mmx 700mm and 450mm deep for

pipe line with one or more inlet

78 64.00 Providing and filling with good quality sinder (steam 808.00 Rupees Eight Cmt

coal) as directed by engineer in charge in sunks in Hundred Eight

layers of 15 cm thk, including watering, placing, Only

ramming well etc. as directed.

79 75.00 Providing and fixing in position 300mm high,150mm 707.00 Rupees Seven Nos

wode English/Gujrati letters made from 1.0mm thick Hundred Seven

stainless steel sheet as directed by Engineer in Only

charge with all material,hardware, accessories and

fitting etc.complete.

80 60.00 Providing and fixing in position 150mm high, 404.00 Rupees Four Nos

English/Gujrati letters made from 1.0mm thick Hundred Four

stainless steel sheet as directed by Engineer in Only

charge with all material,hardware,accessories and

fitting etc.complete.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

81 36.00 Constructing Sandwich Platform of 18 mm thick 3730.94 Rupees Three Sqmt

Polished Black or selected Granite at top and 25 mm Thousand Seven

thick Kota stone slab With 75CM height with Hundred Thirty

necessary Support using 20mm thick cement mortar And Paise Ninety

1:3 for sandwich and fitting at bottom & edges with Four Only

waterproof rigid adhesives including making

necessary grooves in walls with Vertical support of

double Kota stone sandwich every 60 cm centre to

centre including all labour material of approved

quality including full moulded round front edge fixed

in wall for partition and jointed with grey cement

slurry including rubbing and polishing etc. complete

82 134.00 Providing and fix Lours 114 mm Wide G.I. Sheet 2323.00 Rupees Two smt

having Thickness Of 0.55 mm & Weight Not Less Thousand Three

Than 490 gm./mtr. Roll formed to create 84 mm Wide Hundred Twenty

Louvers Snap Fixed On Special Shapped G.I. Three Only

Channel . Fix Louvers & Channels Shall Finished

With Poweder Coating Of 55 micron Per Deatiled

Drawing And Directed By Engineer In Charge etc

83 10.00 Providing and fixing ceramic board of required colour 7575.00 Rupees Seven Sqmt

with 25mm x 19mm alluminium frame and BBS Thousand Five

Plastic orner hanging clamps tray for chalk with Hundred Seventy

duster incluiding fixing on 9mm particle board with Five Only

060mm galvanised steel surface on back side and

060mm ceramic surface on front side as per IS with

necessary fixtures and fastening etc.complete.

84 1534.00 Providing and fixing pre-cast Rubber Dye / steel Dye 699.84 Rupees Six Sqmt

inter locking concrete block 60mm thick with grade of Hundred Ninety

concrete M300 pnumatic compressed / vibrated Nine And Paise

mechanically and as per approved design Confirming Eighty Four Only

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

85 264.00 Providing and fixing eco-friendly light weight calcium 1674.15 Rupees One Sq.mt

silicate false ceiling tiles having Tegular edge & 15 Thousand Six

mm Thick Densified edges on the Tile Periphery for Hundred Seventy

Extra Strength The Light weight calcium silicate Four And Paise

ceiling tiles shall have , light reflection 85% non- Fifteen Only

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC

or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from

mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form

agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked at middle of

the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm

86 6.00 Constructing Manhole with R.C.C. top slab in 1:2:4 23470.48 Rupees Twenty No

mix (1-cement :2-coarse sand : 4-graded stone Three Thousand

aggregate 20mm nominal size) foundation concrete Four Hundred

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 Seventy And

+ 50mm size) inside plastering 15mm thick with Paise Forty Eight

Cement Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to

be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5

(1- Cement: 5-Coarse sand) (3) C type depth

Metre for 150mm diameter sewer.

87 2.00 Providing and Fixing u shape 600mm x 100mm hand 8585.00 Rupees Eight No

rail (Cera) made from SS Bars with AntiSlip Coating Thousand Five

for handicap toilet as per engineer incharge Hundred Eighty

instruction Five Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

88 2.00 Providing and Fixing vertical grab bar 600mm long 5555.00 Rupees Five No

(Cera) for handicap toilet (as per engineer incharge Thousand Five

instruction Hundred Fifty

89 165.00 Providing and fixing 50mm Dia "Z" Clamp as per 141.40 Rupees One No

direction. Hundred Forty

90 240.00 Providing and fixing Chemical Anchore boult of Hilti 252.50 Rupees Two No

equvelent With nut bolts wiser plate Hundred Fifty

completedincluding chemical Driling 12 mm Dia With Two And Paise

all fixer Fifty Only

91 105.00 SIGNAGES ON WALL 813.05 Rupees Eight No

Providing, Fabricating & Fixing wall signage's using Hundred Thirteen

304 grade Stainless steel brushed steel finish plate of And Paise Five

1.5 mm thick fixed on a wall using s.s studs including Only

punched (laser cut) lettering carried out on s.s plate

of required size and text as directed by Engineer over

the S.S plate etc. complete.

Size:(45 cm x15 cm)

92 3.00 Providing and construction 2.75 mt inner dia and 98535.60 Rupees Ninety No

6.50mt deep sock pit including excavation BBCC, Eight Thousand

Brick masonary work at bottom and top including Five Hundred

RCC Slab at top in honey combica masonary in mud Thirty Five And

goober as directed. Paise Sixty Only

93 2.00 Providing Septic tank of size 5.5x2.5x2.50 mt. depth 235908.73 Rupees Two No

including necessary excavation and 23 cm thick RCC Lakh(s) Thirty

wall and horizental portion with bottom concrete Five Thousand

1:5:10 and 40 mm thick IPS and 15 mm thick inside Nine Hundred

plaster 12 cm thick cc 1:2:4 slab with two manhole Eight And Paise

cover including connection with sockpit and other Seventy Three

sanitary items.

94 4.00 Providing and fixing in position collapsible steel 6110.51 Rupees Six Quintal

shutters with vertical channels 20 x 10 x 2 mm braced Thousand One

with flat iron diagonals 20 x 5 mm size with top and Hundred Ten And

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, Paise Fifty One

steel pulleys complete with bolts, nuts, locking Only

arrangements, stoppers handles including applying a

priming coat of red lead

95 2.00 Supplying Handicap steel wheel chair with fixed arm 7575.00 Rupees Seven No

rest and leg rest with 8" PVC Castor and 24" Solid Thousand Five

Mag Wheel with as per instruction of engineering Hundred Seventy

Incharge. Five Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

96 148.00 Providing and fixing machine cut Double polished 616.10 Rupees Six Sqmt

kota stone in single piece (Max 150 cm long and Hundred Sixteen

width upto 45 cm with both side polished) for And Paise Ten

horizontal Shelves including making grooves & Only

Fixing the Same finished with flush pointing, round

open edge etc complete

97 47.00 Providing and laying controlled cement concrete 4374.31 Rupees Four Cmt

M.250 for curing complete including cost of formwork Thousand Three

and reinforcement for reinforced concrete work in (B) Hundred Seventy

Walls, from top of foundation level upto floor two level Four And Paise

(R.A.1) Thirty One Only

98 194.00 Providing 20 mm thick sand faced cement plaster 348.37 Rupees Three Smt

With Gutka Finishon walls for all height above ground Hundred Forty

level consisting of 12mm thick backing coat of Eight And Paise

cement mortar 1:3 (1 cement : 3 sand) and 8mm thick Thirty Seven

finishing coat of C.M. 1:1 (1 cement : 1 sand) Only

including making necessary cornices as directed etc.

complete.For all heights

99 3.00 Providing and fixing Fiber Manhole cover 750 MM x 1262.50 Rupees One No

750 MM size with cover frame having 5 MT load Thousand Two

carrying capacity etc comp Hundred Sixty

100 164.00 Providing and laying White / Colour glazed tiles 60 cm 982.03 Rupees Nine Smt

x 30 cm size & 6 mm. Thick in skirting risers of steps Hundred Eighty

and dado on 10 mm. Thick cement plaster 1:3 (1 Two And Paise

cement : 3 coarse sand) pointing in white cement and Three Only

jointed with white cement slurry. Shade and pattern

approved by Architect Office

101 420.00 Box cutting the road surface to proper slope and 109.05 Rupees One Cum

camber for making a base for road work including Hundred Nine

removing the excavated stuff and depositing on the And Paise Five

road side slops as directed upto 50 Mt. lead Only

102 140.00 Providing and laying compacted W.B.M. 150 mm 2470.46 Rupees Two Cum

thick of machine crushed B.T. metal of size 45 mm to Thousand Four

63 mm with using 0.12/ cmt./10 Smt stone screenings Hundred Seventy

as filler and binding material 0.06 cum./ 10 Smt. And Paise Forty

including spreading, watering & consolidation by Six Only

vibratory roller etc complete.

103 173.00 Providing and laying cement concrete 1:3:6 (1- 2981.57 Rupees Two Cum

Cement : 3- Coarse sand : 6- Graded brick bat Thousand Nine

aggregate 40mm normal size) and curing complete Hundred Eighty

excluding cost of formwork in (A) Foundation and One And Paise

Plinth Fifty Seven Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

104 166.00 Providing and laying in position controlled cement 5243.92 Rupees Five Cum

concrete M.250 grade Controll concrete with ironite Thousand Two

material 4 Kg. / Sqm for reinforced cement concrete Hundred Forty

work, using cement content as per approved design Three And Paise

Mix manufactured in fully aautomatic batching plant Ninety Two Only

and transported to site of work in transit mixer for lead

up to 10 kkms having continous agitated mixer,

manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping

of R.M.C. from transit mixer to site of laying,

excluding the cost of centering shuttering finishing

and reinforcement including cost of admixtures in

recommanded prportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as

per direction of the Engineer in charge Without Fly

Ash (Min cement level as per latest IS 456 shall be

maintained) including labour charges for Trimix

process,it is flooter,surface vibrator,Vacume etc

105 19480.00 Providing ISI Mark T.M.T. bar Fe - 500D 77.29 Rupees Seventy Kg

reinforcement for R.C.C work including bending, Seven And Paise

binding and placing in position complete upto Twenty Nine Only

floor two lavel For All Floor

106 656.00 Providing and fixing pre-cast concrete kerb stone of 414.10 Rupees Four Rmt

gray cement based concrete block 30cm length,30cm Hundred

height and 15cm thick of M250 grade concret as per Fourteen And

approved design and including excavation for fixing in Paise Ten Only

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.(upto 10 ton) with

oil paint colour to Kerb by Yellow/white and Black

patta (Three Coat) one coat of priming & two coat of

oil Paint including cost of material required for paint

and all labour work etc complete as per direction,

detailed drawing and instruction of engineer incharge

.(Including Epoxy Paint of Approved Quality)

107 48.00 Providing Pre-moulded asphalt filler joints as per 703.53 Rupees Seven Rmt

drawings.(A) 12mm Hundred Three

And Paise Fifty

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

108 50.00 Road marking with hot applied thermoplastic paints 367.72 Rupees Three Sqm

with reflectorising glass beads on bitumin surface Hundred Sixty

providing and laying a hot applied thermoplastic Seven And Paise

compound 2.5 mm thick including reflectorising glass Seventy Two

beads @ 250gms per sqm area, thickness of 2.5mm Only

is excluding of surface applied glass beds as per

IRC:35-2015. The finished surface to be level,

uniform and free from streaks and holes. zebra patta

/bump patta lane/center line/ edge line/cut patta. The

white color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

mcd/m2/lux during the service life during the day

time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15 of IRC

35-2015. Warranty for the Retro reflectivity should be

109 59.00 Steel work, welded in built up sections framed work 9108.48 Rupees Nine Qtl.

including cutting, hoisting, fixing in position and Thousand One

applying a priming coat of read lead paint & two coat Hundred Eight

of Oil Paint. (A)In beams and joists, channels angles And Paise Forty

Tees, flats, with connecting plates or angle cleats as Eight Only

in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

110 168.00 Providing corrugated 0.5mm thick double coated 959.50 Rupees Nine Sqm.

Trafford sheet roofing fixed with galvanized iron J or L Hundred Fifty

hooks, bolts and nuts 8mm diameter with bitumen Nine And Paise

and G.I. limpet washer filled with white lead complete Fifty Only

excluding the cost of purlins, Rafters and Trusses (1)

0.50 mm thick sheet.

111 620.00 Providing and fixing to wall ceiling and floor 10.0 Kg. 505.00 Rupees Five Rmt

F/Cm2 working pressure poluthene pipes of the Hundred Five

following outside Dia. Low densidy, complete with Only

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G).150 mm

112 30.00 Providing and Construction of Junction chambers of 1335.22 Rupees One No

size 0.35 x 0.35 x 0.60 mt. including Excavation, Thousand Three

Cement concrete 1:2:4,Half brick masonary Hundred Thirty

a:4,15mm thick plaster C.M.1:4 & Cement concrete Five And Paise

flooring connecting of rainwater pipe as per detailed Twenty Two Only

drawing and as directed by Engineer in charge

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

113 2.00 Providing and constructing filter chamber of size 2.06 10649.44 Rupees Ten No

x 1.21 x 1.20 mt. as directed including Excavation, Thousand Six

Cement concrete 1:2:4,Brick work C.M a:6,Half brick Hundred Forty

masonary C.M - 1:4,15mm thick plaster C.M.1:4 & Nine And Paise

Cement concrete flooring connection rainwater pipes Forty Four Only

as per detailed as directed by Engineer in charge

including cost of labour and material.

114 2.00 Providing water harvesting pit of 2.00 mt x 2.00mt x 84469.33 Rupees Eighty No

4.00 mt. size for water logging with excavation in any Four Thousand

strata upto four meter depth, filling the pit with Four Hundred

B.T.Metal 40 mm in 0.60 mt. depth with 25-40mm Sixty Nine And

kapachi, 0.30 mt. depth and 2.0 mt. depth with coarse Paise Thirty

sand in layers including making P.V.C. line for water

inlet etc. as directed with 250mm dia bore 35 mt.

depth and 150mm dia P.V.C. stainer pipe of 10 Kg.

f/Cm2 casing with gravel packing or as directed.

115 400.00 Plantation of trees in soil incl digging 45 x 45 x 45cm 30.30 Rupees Thirty No.

size pits, preparing soil, providing and mixing And Paise Thirty

organic fertiliser , watering, planting and filling the pits Only

as per direction including etc comlete.

116 400.00 Maintenance of Planted tree upto Two Year incl 252.50 Rupees Two No.

Watering, digging pits, trimmimg applying Fertilizer, Hundred Fifty

insecticide, pesticide and Pesticides and replacing Two And Paise

plants if necessary etc complete for raising of Plants Fifty Only

weeding or soil working also incl maintaining

117 320.00 Providing Tree Plants having minimum 1.00 mt height 101.00 Rupees One No.

and healthy growth of various kinds as like Peltoform, Hundred One

Gulmahore, Karanj, Ambla ,Rain tree, Saptparni, Only

Cherry, Cryjeliya, Spethodiya, Paras Pipala,

Garmalo, Neem, Borsalli, Kadam, Buch, Chanpo,

Asopalav and as suggested etc

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

118 320.00 Supply Saplings and Planting of trees species as 151.50 Rupees One Nos.

specified ( Alstonia scholaris, Erythrina indica, Hundred Fifty

Jacaranda mimosifolia,Delonix regia , Anthocephalus One And Paise

cadamba, Spathodea companulata,Neem Fifty Only

(Azadirachta indica), Lagerstromia speciosa

Tabebuia argentea, Cordia sebestena, Mimusops

elengi, Bauhinia blakeana, Kigelia pinnata, Cassia

fistula, Banyan, Ficus religiosa, Peltophoroum, Bottle

brush, Silver Oak, Billi, Mahagony, Pendula, Desi

Asopalav,Sevan, Badam, Ficus infectoria, Pinkesiya,

Millingtonia hotensis, Rain Tree, Bakm limdi, kasid,

Ashok tree, parkia, Tabebuia Rosea, millettia, etc.)

having height of minimum 7.00 to 8.0 ft. and bag size

is 13 inch x 13 inch, well branched, well established &

free from disease at site as per the instructions.

119 320.00 Supply and Planting saplings of (Jasud, Ixora, 35.35 Rupees Thirty Nos.

Ticoma Gaudi-chaudi, Gultora, Jetropha, Haemeliya, Five And Paise

Chandani, Mogaro, Galfemia, , Allamenda, Desi Thirty Five Only

Gulab, Euphorbia mili, Jasud Hybrid, Chandani

double, Madhukamini, Madhumalti, Ticoma

Capensis, Ixora draft, Nikadevia, English Karen etc.)

having height of minimum 2.00 to 2.5 ft. and bag size

is 8 inch x 10 inch, well branched, well established &

free from disease at site as per the instructions.

120 320.00 Supplying and planting fresh and healthy plants 40.40 Rupees Forty Nos.

(Syzygium cumini , Terminalia catappa, Polyalthia And Paise Forty

longifolia, Phyllanthus emblica, Peltophorum Only

pterocarpum, Azadirachta indica, Bambusa vulgaris,

Neolamarckia cadamba, Lagerstroemia indica,

Cassia fistula, Cassia siamea, Mangifera indica,

Acacia auricutiforms, Casuarina equisetifolia, Annona

squamosa, Ficus religiosa, Ailanthus excelsa, Cordia

sebestena, Alstonia scholaris, Manilkara hexandra,

Moringa oleifera, Pongamia pinnata,Terminalia

arjuna, Butea monosperma, Saraca asoca, Morus

nigra, Ceiba pentandra, Sterculia fotida, Terminalia

bellirica ets.) of 2-3 ft. Height in 6 inch x 6 inch

polythene bag size with all material including

transporting and labouring and all othe inclusive.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

121 50.00 Providing and fixing TREE GUARD 2.00 mt. long & of 1161.50 Rupees One No.

600mm dia square mesh of 2cmx 2Cm. and M.S. Flat Thousand One

of 25mm x 5 mm vertical support and three rings of Hundred Sixty

20 x 3 mm flat, fixing on site in CC 1:4:8, and One And Paise

including oil painting two coats with red lead priming Fifty Only

122 2.00 Providing and erecting open well type hori. Monoblock 7928.50 Rupees Seven No.

pump set with C.I. body having following specification Thousand Nine

(I) 1 H.P. single phase open well motor pump set Hundred Twenty

suitable for 145 ltr / min(ii) suitable for 32 dia delivery Eight And Paise

pipe with control panel & 10 mt. Fifty Only

123 2.00 Providing and fixing Drip Irrigation System of 1868.50 Rupees One No.

approved brand for plantation, incl. fixing with water Thousand Eight

supply line and plantations per drawing and Hundred Sixty

requirement. Screen filter 7000 Ltr per Hr Eight And Paise

124 2.00 Providing and fixing Drip Irrigation System of 606.00 Rupees Six No.

approved brand for plantation, incl. fixing with water Hundred Six Only

supply line and plantations per drawing and

requirement. Pressure gauge 1" dia ( 0 - 7 Kg / Cm2

125 2.00 Providing and fixing Drip Irrigation System of 2373.50 Rupees Two No.

approved brand for plantation, incl. fixing with water Thousand Three

supply line and plantations per drawing and Hundred Seventy

requirement. Bypass assembly Gun metal Three And Paise

126 4.00 Providing and fixing Drip Irrigation System of 656.50 Rupees Six No.

approved brand for plantation, incl. fixing with water Hundred Fifty Six

supply line and plantations per drawing and And Paise Fifty

requirement. 32 mm control valve Gunmetal Only

127 2000.00 Providing and fixing Drip Irrigation System of 12.12 Rupees Twelve Rmt

approved brand for plantation, incl. fixing with water And Paise Twelve

supply line and plantations per drawing and Only

requirement. 16 mm lateral HDPE pipe 2.5 kg incl

fitting and Micro Tube / Dripper etc

128 600.00 Providing and fixing Drip Irrigation System of 18.18 Rupees Eighteen Rmt

approved brand for plantation, incl. fixing with water And Paise

supply line and plantations per drawing and Eighteen Only

requirement. 20 mm lateral HDPE pipe 2.5 kg incl

fitting and Micro Tube / Dripper etc

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

129 240.00 Providing and fixing Drip Irrigation System of 24.24 Rupees Twenty Rmt

approved brand for plantation, incl. fixing with water Four And Paise

supply line and plantations per drawing and Twenty Four Only

requirement. 25 mm lateral HDPE pipe 2.5 kg incl

fitting and Micro Tube / Dripper etc

130 240.00 Providing and fixing Drip Irrigation System of 35.35 Rupees Thirty Rmt

approved brand for plantation, incl. fixing with water Five And Paise

supply line and plantations per drawing and Thirty Five Only

requirement. 40 mm lateral HDPE pipe 2.5 kg incl

fitting and Micro Tube / Dripper etc

131 500.00 Providing and fixing Drip Irrigation System of 3.03 Rupees Three No.

approved brand for plantation, incl. fixing with water And Paise Three

supply line and plantations per drawing and Only

requirement. Dripper 4 LPH / 8LPH

132 15.00 Providing and fixing gun metal check or non-return full- 1464.50 Rupees One No.

way control wheel valve 50MM dia. Thousand Four

133 1740.00 Lawn Grass :- Filling the area up to the depth of23 151.50 Rupees One Smt

cm. with good quality of field fertile soil, breaking the Hundred Fifty

clods leveling the area, free from stone grass roots One And Paise

etc. and farm yard manure at the rate of 5 cum. Per Fifty Only

100 sq. mt. mixing the same with layer of soil,

levelling rolling, pre planting, watering etc. and

planting the lawn grass of approved varity at 10 x

cm. distance etc. complete as per detail specification

and maintance for 3 months.

134 315.00 Providing and fixing 1.20 Metre high fencing with 2.0 391.93 Rupees Three Rmt

Metre long M.S. Angle posts 40mm x 40 mm x6 mm Hundred Ninety

and oil painting 3 coats fixed at 2.5 Mt,C/c. with five One And Paise

Horizontan lines and two diagonals of galvanised Ninety Three

steel barbed wire weighting 9.38 Kg. per 100 Metre, Only

strained and fixed to posts with G.I,staples including

fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C1:5:10 etc complete

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

135 45.00 Providing laying and jointing Brass 3/4 Impact Pop 1989.70 Rupees One Rmt

Up Sprinkler for Agricultural Use his Features like Thousand Nine

Sturdy construction, Impeccable performance, Hundred Eighty

Durable and Case and Sprinkler made of Stainless Nine And Paise

Steel Spring & Axle Both Full & Part Circle Sprinkler Seventy Only

Size: ¾" Female Inlet Thread Colors Nozzles to

differentiate the different sizes 3/4 Impact Pop Up

Sprinkler 3/4" And Direct As Per Engineer Incharge

136 144.00 Brick work using common burnt clay building bricks 3736.93 Rupees Three Cu.mt.

having crushing strength not less than 35 kg./Sq.Cm. Thousand Seven

in SuperStructure above Plinth upto Floor two level in Hundred Thirty

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Six And Paise

Conventional Ninety Three

137 406.00 Providing and fixing RAZOR Coil with Blade 16MM, 898.90 Rupees Eight Rmt.

Clips per Spiral-5, Hot Dipped Galvanized 200 GSM, Hundred Ninety

Tape Thickness 0.50 MM, GI Spring Core Wire Eight And Paise

2.60MM Thick {avg weight 9.50 Kg / 100 mt}, and 5 Ninety Only

Rows of galvanised steel barbed wire weighing

Kg. per 100 Metre in M.S. Angle posts 50 mm. X

mm. X 6 mm. and oil painting 3 coats fixed at 2.5.0

mt. C/C strained and fixed to posts with G.I. staples,

including fixing posts in compound wall

138 2308.00 Finishing wall with weather proof exterior 73.75 Rupees Seventy Sq.mt.

emulsionpaint on wall surface (two coats) to give an Three And Paise

requiredshape even shade after thoroughly brushing Seventy Five

the surfaceto remove all dirt, and remains of loose Only

powdered materials. etc complete

139 350.00 Drilling 250/300 mm dia pilot bore at above village 630.24 Rupees Six Rmt.

site all strata by mud flush direct rotary rig / reverse Hundred Thirty

rotary rig And Paise

Twenty Four Only

140 350.00 Reaming of 250 mm dia pilot bore hole to 600 mm dia 385.82 Rupees Three Rmt.

bore hole including assembling, jointig, lowering Hundred Eighty

housing casing, strainer pipe, Gravell packing, clay Five And Paise

packing etc.comp. from 250/300mm dia to 550mmm Eighty Two Only

dia bore hole rom 0.00 mts to 330.00mts

141 25.12 Supply of gravel having size 4mm to 6mm as directed 2049.29 Rupees Two Cum

on site Thousand Forty

Twenty Nine Only

142 25.12 Supply of clay balls having size of 15mm to 25mm 758.51 Rupees Seven Cum

made from stickyclay on site. Hundred Fifty

Eight And Paise

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

143 3.00 Supply of of Cement OPC 53 grade For Cement 6365.02 Rupees Six M.T.

Celling as directed on site As per Engineer Encharge Thousand Three

144 1.00 Making Job Connection For Cement Celling as 13405.73 Rupees Thirteen Job

directed on site As per Engineer Encharge Thousand Four

145 150.00 Making Job Connection For Sealing of Existing 111.10 Rupees One Mtr

Tubewell by Sticky Clayon/Clay Ball/Gravel site As Hundred Eleven

per Engineer Encharge And Paise Ten

146 350.00 Supply , Lowaring And Laying of ERW blank M.S. 2431.07 Rupees Two Rmt.

pipe of approved quality at site of work confirming to Thousand Four

IS 1239-1964 200 mm dia ( Min 6.00 mm thick) Hundred Thirty

147 2.00 Reducer made from 6 mm thick plate (M.S.) for ERW 1884.27 Rupees One No.

pipes of size as below(ii) 200mm dia X 250 mm dia. X Thousand Eight

600 mm length Hundred Eighty

148 1.00 Conducting Electrologging Test of 200mm dia bore 18180.00 Rupees Eighteen No.

hole incl. Carting and idle hours Thousand One

149 320.00 Supplying ISI marked (Embossed) following size of 873.65 Rupees Eight Rmt.

Heavy duty "C" Class GI pipe & erecting as directed Hundred Seventy

by Engineer in Charge with necessary plumbing as Three And Paise

desired (D) 80mm dia. (Jindal, Asian, Tata make or Sixty Five Only

equilalent make only)

150 1.00 Development of Each water bearing zones 35008.62 Rupees Thirty No.

comes/across up to the full depth of tube well (Size Five Thousand

200/250/300 mm dia depth more then 150 mts) by Eight And Paise

lowering 100 mm dia dropline and 32 mm dia GI air Sixty Two Only

line for each zone with suitable capicity

Aircompressor up to the availability of send free

151 450.00 Supplling Of G.I. Fitting (B) Above 65mm and up to 73.48 Rupees Seventy kg

100 mm Three And Paise

Forty Eight Only

152 100.00 Gas Cutting of MS/Gi heavy duty pipe and threading 128.60 Rupees One No.

one end of pipe with 8 TPI / 11 TPI as per Hundred Twenty

requirement and including to and fro charges (C ) 200 Eight And Paise

mm Dia Sixty Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

153 70000.00 Slotting of 200 mm dia pipe having Slot of 0.22 Rupees And No.

6.75 cm x 6.35 cm x 3.12 mm Paise Twenty

154 1.00 Charge For Lowering of drop line above 186 mt 29365.75 Rupees Twenty Job

155 1.00 MONO PUMP SET Supply of Board approved make 46686.24 Rupees Forty Six No

electric motor driven Submersible pumpset confirming Thousand Six

to IS 8034/198/ and motor confirms to IS 9283/1979 Hundred Eighty

working at three phase 400/440 volt 50C/S A.C. Six And Paise

Supply & 2900 RPM Twenty Four Only

Disharge - 240 LPM,

Cat. - 4.8, Disharge - 240 LPM, Head - 270 Mts HP -

156 500.00 Cable Supply of PVC insulated flat submersible cable 463.59 Rupees Four Mtr

as per detailed technical specifications of R/C of Hundred Sixty

GWSSB conforming to IS 694, IEC 60227 / 60228. Three And Paise

(a) 1 x 3 x 25 mm2 size Fifty Nine Only

157 1.00 Control panel Board for Sub. Pump Detailed 27687.13 Rupees Twenty No

Specification as per GWSSB R/C ATS FROM 31 TO Seven Thousand

35 H.P. Six Hundred

FROM 31 TO 35 H.P. Eighty Seven

158 1.00 Lowering of submirsible motor pump set complete 28722.38 Rupees Twenty job

with required. Nos. and size of casing pipes erected Eight Thousand

bymeans of proper chainpulley block & pipe wrenches Seven Hundred

after checking of threads of each pipe with coupling to Twenty Two And

take the load of the pump set and pipe assembly filled Paise Thirty Eight

up with water. Only

(c) (c)Above 150 mtr.

159 2143.00 Earthwork for embankment including breaking clods, 169.28 Rupees One Cum.

dressing with all lead and lift and including watering Hundred Sixty

rolling and consolidation of subgrade in layers at Nine And Paise

O.M.C. to required dry density including filling the Twenty Eight

depression which occur during the process using Only

power roller 8T to 10T.(E) From Borrow area within

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

160 1.00 OFFICE TABLE : Office Table 1650mm W X 750mm D X 15150.00 Rupees Fifteen No.

740mm H Worktop Made from 25 mm Thick Pre-laminated Thousand One

Particle board. All the edges are sealed with 2 mm thick Hundred Fifty

PVC edge band all around, Side Panels Made from 25 mm Only

Thick Pre-laminated Particle board. All the edges are

sealed with 2 mm thick PVC Edge band on the user side

and 0.8 mm on the Top and Bottom Side. The side panels

have 2 glide screws each for leveling of the desk. Modesty

Panel Made from 18 mm Thick Pre- laminated Particle

board. All the edges are sealed with 0.8 mm thick PVC

edge band all around Freestanding Pedestal The

freestanding pedestal is made from 18 mm Pre-laminated

Particle board with a combination of 2mm and 0.8 mm

PVC Edge band on all the exposed surfaces as per

requirement. The drawers are provided with suitable slides

for smooth operation. All the pedestal drawers are centrally

locked with a single key. The entire desk unit is assembled

with suitable KD fittings and hardware. Each side panel is

provided with a cutout for laying cables for the monitor and

other computer accessories.

161 1.00 Supplying of Box Type Openable metal bed with 18 8080.00 Rupees Eight No.

m.m. thick M.R.Grade plywood with 1.0 mm thick Thousand Eighty

lamination sheet as per drawing on all side, bottom & Only

top with 18mm thick M.R.Grade plywood with

malamine polish inside, back and bottom side and

stainless structure shall be of 50 mm × 25 mm

M.S.Powder coated, leg shall be of 38 mm × 38 mm

M.S.Power coated pipe of 1.6 mm thick power coating

shall be of 60 to 70 Microns. (B) 2000mm x 2000mm

162 1.00 Dinning Table+ Chair set : Four Seater Supplying 28280.00 Rupees Twenty No.

Four Seated Dinning table having size of 750mm x Eight Thousand

740mm x 1100mm made from 100mm x 100mm solid Two Hundred

teak wood leg. The frame is made from 50mm x Eighty Only

100mm teak wood finished with natural polish and top

covered with 19mm BWR plywood covered with

1.5mm/1mm thick laminate including 4 nos. Chair

having size of 400mmx 82mm x 440mm with fabric

cover with soft matrial etc. complete as directed by

Engineer in charge/ Architect.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

163 12.00 SIDE TABLE/CENTER TABLE : Providing 3535.00 Rupees Three Nos.

and constructing Side Table/Center Table made from Thousand Five

Top Size 1000X500mm : flat laminated plywood Hundred Thirty

34mm thick with natural veneer coated with PU Five Only

lamination in high gloss finish. The frame is made

from 16mm calibrated BWR Plywood covered with

1mm Lamination, etc.complete as directed by

engineer in- charge/Architect.

164 8.00 SIDE TABLE/CENTER TABLE : Providing 2525.00 Rupees Two Nos.

and constructing Side Table/Center Table made from Thousand Five

Top Size 600X600mm : flat laminated plywood 34mm Hundred Twenty

thick with natural veneer coated with PU lamination in Five Only

high gloss finish.The frame is made from 16mm

calibrated BWR Plywood covered with 1mm

Lamination, etc.complete as directed by engineer in-

charge/Architect.

165 10.00 Supplying Eight Seated Canteen table : Structure 15150.00 Rupees Fifteen Nos.

made 1''''.5 ''''x 1''''.5'''' tubular pipe crc 16 gauge with Thousand One

powder coating finish horizontel and vertical support Hundred Fifty

20 x 40mm16 gauge crc pipe with powder Only

coating,table top made of S.S. 304 grade 20 gauge

sheet , having size of top 69'''' x 30''''.8 SEATER

166 3.00 Computer Table - Rector/ Special Room/ Suit Room 8080.00 Rupees Eight No.

Providing & Supplying Computer Table of linear side Thousand Eighty

station workstation with understructure of leg, cross Only

connector, wire carrier, cable pole, power box, access

flap.Supplying & placing 25mm thk prelaminated

rectanguler ws with pvc lipping of size 1200mm X

600mm X 750mm H and CPU trolley Approved Make:

Godrej / Herman Miller / Haworth / Knoll

167 3.00 Office Chair Supplying of revolving chair Seat & Back 15150.00 Rupees Fifteen No.

Upholstered with Molded Foam Seat & Back is Thousand One

Covered with ABS. Multi-Locking Mechanism with any Hundred Fifty

Position Locking System Seat in Waterfall design to Only

provide Max.Comfort for Long working hours.Loop

arm with Synchronized Movement. Ergonomically

Design Back to provide Extra Lumber Support.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

168 4.00 VISITOR CHAIR Supply and Installation Nylon mesh 6060.00 Rupees Six No.

mid back visitor chair Supply and Installation of Nylon Thousand Sixty

make Mesh High back chair, overall dimension of Only

chair 680 L x 680 W x 990 H, Base should be

cantilever frame made of MS tube, 550W X 535D

3mm thick. Seat 490 W x 515 D x 475 H (eff.),

thk., back rest 515 W x 660H, 515 H. The seat shall

be made up of 12±0.1mm. Thick hot-pressed plywood

upholstered with moulded foam and fabric and

polyurethane foam density= 45-50Kg/cu.m, 35mm

thick. Seat upholstery material shall be made

polyester. Seat bottom cover shall be made of Non-

woven fabric, Back shall be made of MS HR sheet

having thickness of 8mm, arm rest should be fixed

made of Polypropylene,etc. complete as directed by

architect and engineer in-charge.

169 150.00 STUDENT CHAIR - Providing Student chair of overall 2020.00 Rupees Two No.

size mentioned below make of 1 ¼” (1.25) ERW pipe Thousand

of 16 gauge with seat & back made from 12 mm hot Twenty Only

press ply & provided with PU mold of 40 density &

Covered with U- foam for seat 75 mm thick

(minimum) or as per requriment with best approved

tapestry with duo colour fabric combination with polka

patter on base & handle provide robust rough as per

sample approved by Architect & Engineer incharge.

170 72.00 CANTEEN CHAIRS Canteen Chairs SEAT/BACK The 1515.00 Rupees One No.

seat / back shell is made up of 1.2+/-0.1 cm thick hot Thousand Five

pressed plywood measured as per QA method Hundred Fifteen

described in OCP-QLTA-P14-18 and laminated with Only

natural veneer in three different shades of Teak &

Mahgony. BACK SIZE: 42.0cm (W) x 45.0cm (H),

SEAT SIZE: 44.0cm (W) x40.0cm (D). WOODEN

ARMRESTS: The armrests are made from Laminated

veneered plywood (Teak stained) with melamine

finish. TUBULAR UNDERSTRUCTURE: The tubular

understructure is made of of M. S. tube O1.9+/-0.02

cm. X 0.16+/-0.0128 cm thk. And black powder

coated (DFT 40-60 microns)ferrules.

171 8.00 S.S.VISITOR BENCH Supplying Visitor Three seater 7575.00 Rupees Seven No.

bench : Structure made of bottom support ms crc pipe Thousand Five

with black colour powder coating finish, arms rest crc Hundred Seventy

pipe with chrome finish, seat and back ms crc Five Only

perforated seat with superior quality of powder

coating finish.Colour black and grey.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

172 2.00 02 Seater Sofa: "seat foam: the seat should be made 18180.00 Rupees Eighteen No.

of pu foam with density 32 ± 2 kg/cu.mtr having an Thousand One

additional top layer of j pu foam with density 28 ± 2 Hundred Eighty

kg/cu. seat should be upholstered with fabric or Only

leatherette. 2) back foam: the back should be made

of pu foam with density 28 ± 2 kg/cu. mtr with two

additional top layer of supersoft foam of density 23±2

kg/cu. mtr, upholstered with fabric or leatherette

understructre : understructure should be made up

of1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-

18 4. dia 4mm zigzag spring assembly should be

mounted in understructure for support and additional

cushioning purpose leg assembly: it should be a

welded assembly made in stainless steel (grade ss

202) tube & plate.Width (W):146.0 CM. Depth (D):

92.0 CM. Height (H): 82.0 CM. Seat Height (SH):

CM. APPROVED MAKE : GODREJ / HERMAN

MILLER/ STEELCASE/ KNOLL"

173 3.00 03 Seater Sofa: "seat foam: the seat should be made 25250.00 Rupees Twenty No.

of pu foam with density 32 ± 2 kg/cu.mtr having an Five Thousand

additional top layer of j pu foam with density 28 ± 2 Two Hundred

kg/cu. seat should be upholstered with fabric or Fifty Only

leatherette. 2) back foam : the back should be made

of pu foam with density 28 ± 2 kg/cu. mtr with two

additional top layer of supersoft foam of density 23±2

kg/cu. mtr, upholstered with fabric or leatherette

understructre : understructure should be made up of

1.2±0.1 cm. thick hot pressed plywood ocp-qlta-pl14-

18 4. dia 4mm zigzag spring assembly should be

mounted in understructure for support and additional

cushioning purpose leg assembly: it should be a

welded assembly made in stainless steel (grade ss

202) tube & plate.Width (W): 205.5 CM. Depth (D):

92.0 CM. Height (H): 82.0 CM. Seat Height (SH):

CM. APPROVED MAKE : GODREJ /HERMAN

MILLER/ STEELCASE/ KNOLL"

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

174 113.00 Supplying of Box Type Openable metal bed with 18 13130.00 Rupees Thirteen No.

m.m. thick M.R.Grade plywood with 1.0 mm thick Thousand One

lamination sheet as per drawing on all side, bottom & Hundred Thirty

top with 18mm thick M.R.Grade plywood with Only

malamine polish inside, back and bottom side and

stainless structure shall be of 50 mm × 25 mm

M.S.Powder coated, leg shall be of 38 mm × 38 mm

M.S.Power coated pipe of 1.6 mm thick power coating

shall be of 60 to 70 Microns. (A) 2000 mm × 950 mm

175 113.00 Supplying of 4" thick single bed matress made from 2525.00 Rupees Two No.

40 density u-fom with cotton cloth cover and Quilte Thousand Five

cover with all required hardware like chain etc Hundred Twenty

material and labour. (A) 1950mm x 900mm Size Five Only

176 1.00 Supplying of 4" thick single bed matress made from 5050.00 Rupees Five No.

40 density u-fom with cotton cloth cover and Quilte Thousand Fifty

cover with all required hardware like chain etc Only

material and labour.(B) 1950mm x 1950mm Size

177 113.00 Supplying of steel cupboards with steel Frames and 12120.00 Rupees Twelve No.

shutters in two top And bottom Part Seperatly Thousand One

operatead (Double shutter, horizontal self and middle Hundred Twenty

support in each CB) using 20 gauge CRCA steel Only

sheet including necessary SS fixtures, fastening like

locking arrangement, handles, Hinges with approved

shade of sparay painting as Directed by Engineer In

Charge etc complete. Sizes should be 750mm (W)

178 1.00 Supplying Dressing Table with Mirror having size of 30300.00 Rupees Thirty No.

50 cm x 182 cm x 40 cm made from Solid wood Thousand Three

having full size mirror with 2 nos. of drawere etc. Hundred Only

complete as approved by Architect or Engineer in

179 226.00 Bed sheet for single bed with one pillow cover 505.00 Rupees Five No.

Providing and supplying single bed sheet with SAG Hundred Five

Printed logo. Brand: MARKGOLD Colour: White Only

Dimensions(In Inches): 54 x 90 Set Content:

Bedsheet, 1 Pillow Cover Thread Count: 210 Weight:

0.5 kg No of Pillow Covers: 1 Fabric: 100% Cotton

Sku: FU1741570-S-PM26887

180 230.00 Supplying and Laying Featherlite pillow With Cover of 505.00 Rupees Five No.

medium size 18" x 27" as per the instruction and As Hundred Five

per approved by Architect and approved by Engineer Only

181 230.00 Supplying and Laying Woolen Blanket as per the 606.00 Rupees Six No.

instruction and As per approved by Architect and Hundred Six Only

approved by Engineer In-charge.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

182 230.00 Providing and Supplying Cotton Solapur Blanket 353.50 Rupees Three No.

having size of 224 CM X 145 CM having weight of Hundred Fifty

1040 Grams as per approved colour by Architect and Three And Paise

approved by Engineer In-charge. Fifty Only

183 4.00 Bed sheet for double bed Providing and supplying 606.00 Rupees Six No.

double bed sheet with SAG Printed logo.Fabric Hundred Six Only

Contents: - The sheet be manufactured from

percent polyester & 53 Percent cotton the size should

be 224 Cms X 224 Cms as per the instruction and As

per approved by Architect and approved by Engineer

184 189.00 Mosquito net Providing and fixing Mosquito Net 404.00 Rupees Four Sqm

Fiberglass with Pre- Stiched Netting Mesh Size as per Hundred Four

window , Curtain, DIY Self-Adhesive Window Net Only

Screen with Hook and Loop Sticky Tape, durable

screen mesh, Anti Wrinkle and no breaks. Chemical

corrosion resistance.

185 3.00 T.V. LEDGE Ledge with 3nos drawers is fixed to wall 28785.00 Rupees Twenty No

with 4 nos M.S. Brackets is Eight Thousand

1.8m length 230mm depth and 150mm height. Seven Hundred

Drawers run on telescopic channel. Top made of Eighty Five Only

19mm plywood with 1.0mm thick laminate and

drawers made of 12 mm plywood with balancing

laminate. complete with drawing and detail

186 113.00 Bath room set Providing and supplying cello make 252.50 Rupees Two No

bath room set with bucket,tumbler and stool.SIZE: 41 Hundred Fifty

cm x 41 cm x 38 cm with Mug - 1.0 Ltr. ; Bucket - 20 Two And Paise

Ltr. Fifty Only

187 30.00 Toilet set Providing and supplying cello make bath 252.50 Rupees Two No

room set with bucket,tumbler. Hundred Fifty

188 113.00 Wall hook hanger. 5 nos hook in one set 101.00 Rupees One No

Providing,supplying and fixing SS hook hanger with 5 Hundred One

nos of hook in one set. Only

189 126.00 Aluminium cloth Hanger Providing, supplying Ivanic 80.80 Rupees Eighty No

Aluminium Cloth Hanger Heavy Duty 202 Grade as And Paise Eighty

per instructions of engineer-in-charge(24 nos. in one Only

190 37.00 Plactic dustbin Small Providing and sypplying Aditi 121.20 Rupees One No

make High Quality stainless Plactic Dustbin- 10 Liters Hundred Twenty

capacity One And Paise

191 35.00 Plactic dustbin Big Providing and sypplying Aditi 272.70 Rupees Two No

make High Quality stainless s teel Dustbin-46-50 Hundred Seventy

Liters capacity. Two And Paise

192 74.00 Door mate-size:38cmx58cm Providing and supplying 252.50 Rupees Two No

3G pvc door mat at all rooms,toilets,entrance and Hundred Fifty

kitchen. Two And Paise

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

193 26.00 Door mate-size:180cmx90cm Providing and supplying 404.00 Rupees Four No

3G pvc door mat at all rooms,toilets,entrance and Hundred Four

194 31.00 Cloth stand Providing and supplying Mega Stainless 1161.50 Rupees One No

Steel Cloth Drying Stand. Thousand One

195 27.00 Wet and Dry Mop Supply of Make To Be Used For 858.50 Rupees Eight No

Wet & Dry Cleaning With Maximum Cleaning Effect. Hundred Fifty

Microfiber Mop Cloth Clean And Absorb Oily Particles Eight And Paise

And Other Dirt. Microfiber Cloth Can Use Wet & Dry. Fifty Only

196 45.00 Room lock Providing and supplying Link O Line 303.00 Rupees Three No

Round 65mm with 5 Keys ,Steel Double Locking Hundred Three

Room lock(silver). Only

197 9.00 Key holder size: 30 x 30 x 5 Centimeters Providing 505.00 Rupees Five No

and supplying of key manager from "Lepose "is made Hundred Five

of metal and comes in silver color. The size of this Only

product is 5 cm x 40 cm x 50 cm (l x w x h). You can

store upto 48 keys in this holder.

198 30.00 PAINTING - 17"X17" Providing and fixing of painting 606.00 Rupees Six No

as per selection and complete the work satisfactorily Hundred Six Only

as per instruction of architect or Engineer-in charge.(

199 31.00 Providing and fixing of 12" round wall clocks as per 404.00 Rupees Four No

selection and complete the work satisfactorily as per Hundred Four

instruction of architect or Engineer-in charge. Only

200 36.00 Providing and fixing of planter/pots of frp or plastic 505.00 Rupees Five No

with artficial indoor plants as per selection and Hundred Five

complete the work satisfactorily as per instruction of Only

architect or Engineer-in charge.

201 9.00 METAL RACK FOR STORAGE Providing 6060.00 Rupees Six No

and fixing of storage rack of angle slotted type of size Thousand Sixty

78” x 36” x 18” with 6 shelfs (20 swg), including all Only

hardware, colors, channels, etc. and complete the

work satisfactorily as per instruction of Architect or

Engineer-in charge.

202 108.00 Study Table 1200 mm D x 600mm W x 750mm H 4545.00 Rupees Four No

Providing and constructing Study Table made from Thousand Five

flat laminated plywood 34mm thick with natural Hundred Forty

veneer coated with PU lamination in high gloss finish. Five Only

The frame is made from 16mm calibrated BWR

Plywood covered with 1mm Lamination, etc.complete

as directed by engineer in- charge/Architect.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

203 200.00 Providing and Fixing 100% Cotton fabric Curtain as 1212.00 Rupees One No

approved make including fitting and fixtures etc. Thousand Two

complete as directed by Architect or Engineer - in Hundred Twelve

204 1.00 Kitchen Equipment Providing and Fixing Clean Dish 48480.00 Rupees Forty No

Landing Table with Angle of Storage for Dishwasher Eight Thousand

rack (850mmX900mmX850mm) as per Detail Four Hundred

specifications,make andapproved by Engineer In- Eighty Only

205 1.00 Providing and Fixing S.S Exhaust Hood With SS Oil 93930.00 Rupees Ninety No

Filter (S.S Exhaust Hood S.S 304 , 18 SGW S.S, Oil Three Thousand

Filter S.S 304 , 18 SGW S.S ) OF SIZE Nine Hundred

3600x900x600 mm as per Detail specifications, make Thirty Only

and approved by Engineer In-charge.

206 1.00 Providing and Fixing Exhusht Blower 3 HP 3 Phase ( 72720.00 Rupees Seventy No

Motor Kilosker & Crompton ) Heavy duty centrifugal Two Thousand

fan for blower , fabricated from heavy M.S. Seven Hundred

sheets/channel thickness 5 mm and plates reinforced Twenty Only

with angle iron 50 x 50 x 5 mm thickness for sturdy

and smooth performance dynamically balance

impeller fan size 525 mm plate thickness 5 mm

capacity 8000 CFM , pressure 40 mm water gauge

motor 3 HP 960 RPM , 2.25 KW three phase as per

Detail specifications,make and approved by Engineer

207 20.00 Providing and Fixing G.I Ducting 20 SGW, Chimni 1515.00 Rupees One Sqm

15"x15" as per Detail specifications,make and Thousand Five

approved by Engineer In-charge. Hundred Fifteen

208 1.00 Providing and Fixing Two Burner Gas Range with 1 35350.00 Rupees Thirty No

u/s of size 1200x600x800 mm as per Detail Five Thousand

specifications, make and approved by Engineer In- Three Hundred

charge. Fifty Only

209 1.00 Providing and Fixing Chapati Plate with Puffer of size 30300.00 Rupees Thirty No

1000x600x800 mm as per Detail specifications, make Thousand Three

and approved by Engineer In-charge. Hundred Only

210 1.00 Providing and Fixing Dough kneader with Capacity : 48480.00 Rupees Forty No

10 Kgs , Elt. Motor : 1 H.P of size 38"x19"x35" inches Eight Thousand

as per Detail specifications, make and approved by Four Hundred

Engineer In-charge. Eighty Only

211 1.00 Providing and Fixing Pulveriser with Capacity : 25 Kgs 35350.00 Rupees Thirty No

, Elt. Motor : 1 H.P, 1 phase RPM-2800 of size Five Thousand

19"x17"x24" inches as per Detail specifications, make Three Hundred

and approved by Engineer In- charge. Fifty Only

212 1.00 Providing and Fixing Stock Pot Range with 1 u/s of 22725.00 Rupees Twenty No

size 600x600x700 mm as per Detail specifications, Two Thousand

make and approved by Engineer In-charge. Seven Hundred

Twenty Five Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

213 1.00 Providing and Fixing Counter Top with 1 u/s of size 15150.00 Rupees Fifteen No

47"x25"x34" inches as per Detail specifications, make Thousand One

and approved by Engineer In-charge. Hundred Fifty

214 2.00 Providing SS 304 Grade Utensil Storage Rack in 20200.00 Rupees Twenty No

Store of 2000mm W X 2250mm H X 900mm D size Thousand Two

as approved b y Engineer In Charge. Hundred Only

215 1.00 Bain Marie Providing and Fixing Bain Marie 6+1 Bowl 40400.00 Rupees Forty No

(06 round bowl,+ 01 Rectangular Bowl total 07 bowl) Thousand Four

of size 47” X 25” X 34” As per Specifications. Hundred Only

216 10.00 Supply, Installation, Testing & Commissioning of GI 2925.26 Rupees Two Nos.

pipe (IS:1239) class C including cutting, screwing, Thousand Nine

welding , necessary fittings i.e. bends, elbows Hundred Twenty

reducers, clamps, hangers, supports, flanges,dead Five And Paise

flange all G.I nut bolt as required etc. including Twenty Six Only

cutting holes in brick or RCC walls/slabs and making

good the same complete including painting with one

coat of primer and two or more coats of synthetic

enamel paint of approved make and shade complete

in all respects. 150 mm dia

217 188.00 Supply, Installation, Testing & Commissioning of GI 2391.98 Rupees Two Rmt

pipe (IS:1239) class C including cutting, screwing, Thousand Three

welding , necessary fittings i.e. bends, elbows Hundred Ninety

reducers, clamps, hangers, supports, flanges,dead One And Paise

flange all G.I nut bolt as required etc. including Ninety Eight Only

cutting holes in brick or RCC walls/slabs and making

good the same complete including painting with one

coat of primer and two or more coats of synthetic

enamel paint of approved make and shade complete

in all respects. 100 mm dia

218 12.00 Supply, Installation, Testing & Commissioning of GI 2096.46 Rupees Two Rmt

pipe (IS:1239) class C including cutting, screwing, Thousand Ninety

welding , necessary fittings i.e. bends, elbows Six And Paise

reducers, clamps, hangers, supports, flanges,dead Forty Six Only

flange all G.I nut bolt as required etc. including

cutting holes in brick or RCC walls/slabs and making

good the same complete including painting with one

coat of primer and two or more coats of synthetic

enamel paint of approved make and shade complete

in all respects. 80 mm dia

219 1.00 Providing and erecting BUTTERFLY VALVE 9049.60 Rupees Nine Nos

(MANUAL) with C I body SS disc nitrile sheet & O - Thousand Forty

ring & PN 16 pressure rating as specified. 150 mm Nine And Paise

220 5.00 Providing and erecting BUTTERFLY VALVE 6733.67 Rupees Six Nos

(MANUAL) with C I body SS disc nitrile sheet & O - Thousand Seven

ring & PN 16 pressure rating as specified. 100 mm Hundred Thirty

Three And Paise

Sixty Seven Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

221 6.00 SITC of Single headed External Fire Hydrant Valve 6200.39 Rupees Six Nos

with 63 mm dia with m/f coupling (SS 304) Thousand Two

instantaneous outlet conf. to IS 5290 Type – A Hundred And

including mating flanges galvanized nuts, bolts, Paise Thirty Nine

studs, washer & gaskets 3 mm thick with all Only

complete accessories

222 6.00 SITC of 63 mm dia. Stainless steel (SS 304) 1678.62 Rupees One Nos

Universal Branch pipe conf. to IS :2871 Thousand Six

Hundred Seventy

Eight And Paise

223 6.00 SITC of Fire Fighting Hose Pipe -conf. to IS 636 4492.48 Rupees Four Nos

Type A (type -1 ), the fire hose shall be 15 m long Thousand Four

with 63 mm dia. Stainless steel (SS 304) couplings Hundred Ninety

conf. to IS :903 at both the ends for connection Two And Paise

with the hydrant valve Forty Eight Only

and the branch pipe.

224 6.00 Providing, fixing, testing and commissioning of MS 5753.87 Rupees Five Nos

standard double fire hose cabinet stand mounting Thousand Seven

type (having single opening with M.S. Fabricated Hundred Fifty

Stand, necessary locking arrangement by allan key Three And Paise

suitable for housing 1 nos. hose pipe, 1no. Branch Eighty Seven

225 1.00 Providing Installation Testing & Commissioning Of 22998.81 Rupees Twenty Nos

Foot Valve Of 150 mm Dia As Per IS Standard Two Thousand

Ninety Eight And

Paise Eighty One

226 2.00 Supplying, Installation, Testing & Commissioning of 17875.99 Rupees Nos

C.I. flanged "Y" Type Strainer Of 100mm Diawith Seventeen

suitable flanges, nuts, bolts, gaskets etc. complete. Thousand Eight

Hundred Seventy

Ninety Nine Only

227 1.00 Supply,Installation, Testing & Commissioning of 14113.74 Rupees Fourteen Nos

Stainless steel Fire Brigade connection (Suction Thousand One

collecting head) consisting of 4 nos. 63 mm dia Hundred Thirteen

instantaneous type male coupling with built-in check And Paise

valves and 150 mm dia.flanged outlet complete with Seventy Four

bolts, nuts and rubber insertions as required as per Only

IS:904-1983 with butter fly valve and Non-Return

228 6.00 Supply,Installation, Testing & Commissioning of First- 12193.73 Rupees Twelve Nos

Aid Fire Hose Reel wall mounting swinging type Thousand One

complete with drum,bracket, 25 mm dia. Ball valve Hundred Ninety

and 25 mm dia.x 40 M long high pressure Hose Reel Three And Paise

tubing as per IS:12585 with stainless steel shut-off Seventy Three

nozzle having 5mm dia.orifice. The Hose Reel Only

shall strictly confirm to IS;884-1985 with piping.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

229 1.00 Supply, installation, testing & commissioning of air 2476.42 Rupees Two Nos

vent valves (PN10) of following sizes along with ball Thousand Four

valve. (15 mm) Hundred Seventy

230 3.00 providing and erecting NON - RETURN VALVE 11160.50 Rupees Eleven Nos

with dual plate of C I body SS plates vulcanized Thousand One

NBR seal flanged end & PN 16 pressure rating Hundred Sixty

as specified. 100 mm dia And Paise Fifty

231 150.00 Supply, fabication and installation of MS support as 198.87 Rupees One kG

per required for support of pipe and Other Hundred Ninety

Accessories Eight And Paise

232 210.00 Applying priming coat over new steel and other metel 69.99 Rupees Sixty Rmt

surface after and including preparing the surface Nine And Paise

bythroughly cleaning, oil,grease, dirt and other foreign Ninety Nine Only

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming

paint brushing red lead.

233 210.00 Painting two coats (excluding priming coat) on new 55.30 Rupees Fifty Five Rmt

steel and other metal surface with enamel paint, And Paise Thirty

brushing,interior to give an even shade including Only

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

234 15.00 Supplying & erecting carbon dioxide (CO2) fire 7824.77 Rupees Seven Nos

extinguisher user of following capacity with necessary Thousand Eight

clamps made from 50 x 6 mm M.S. Flat with nut & Hundred Twenty

bolts grouted in wall complete. [A] For 4.5 Kg Four And Paise

Capacity Seventy Seven

235 15.00 Supplying, installing, testing & 2610.85 Rupees Two Nos

commissioning of ABC dry powder stored pressure Thousand Six

type 6 Kg. capacity (IS:15683) with ISI Hundred Ten And

marked with required Paise Eighty Five

accessories. Only

236 15.00 Supply and installation of auto glow reflective film 1538.74 Rupees One Nos

signages for building at placed required bycode and Thousand Five

competent authority "CO2 extingushier" size of Hundred Thirty

signages shall be :8"x16". Eight And Paise

237 15.00 Supply and installation of auto glow reflective film 1538.74 Rupees One Nos

signages for building at placed required bycode and Thousand Five

competent authority "ABC extingushier" size of Hundred Thirty

signages shall be : 8"x16". Eight And Paise

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

238 15.00 Supply and installation of auto glow reflective film 781.37 Rupees Seven Nos

signages for building at placed required bycode and Hundred Eighty

competent authority "Fire Exit" size of signages shall One And Paise

be : 5"x12". Thirty Seven

239 15.00 Supply and installation of auto glow reflective film 653.27 Rupees Six Nos

signages for building at placed required bycode and Hundred Fifty

competent authority "Arrow Signages" size of Three And Paise

signages shall be : 4"x12". Twenty Seven

240 8.00 Supply and installation of auto glow reflective film 653.27 Rupees Six Nos

signages for building at placed required bycode and Hundred Fifty

competent authority "Fire hose reel" size of signages Three And Paise

shall be :4"x12". Twenty Seven

241 4.00 Supply and installation of auto glow reflective film 1538.74 Rupees One Nos

signages for building at placed required bycode and Thousand Five

competent authority "Exit plan" for each building (A3 Hundred Thirty

size) - with proper frame. Eight And Paise

242 1.00 Supply and installation of auto glow reflective film 185.65 Rupees One Nos

signages for building at placed required bycode and Hundred Eighty

competent authority "Assemply points" size of Five And Paise

signages shall be : 3' x 2' . Sixty Five Only

243 1.00 NOC From Chief Fire officer with required Details, 77770.00 Rupees Seventy Nos

Layouts and Testing as required. Seven Thousand

244 12.00 Maitaince For Three Year Incluindin All Necessary 26664.00 Rupees Twenty Quarter

Requaried Equipment And Submit Report Quartly Six Thousand Six

(onec in three Month) and Submit NOC from User Hundred Sixty

Agency onec in Six Month As Requried engineer Four Only

245 324.00 Point wiring for Light / Bell with 2-1.5 sq.mm & 582.77 Rupees Five Pts.

earth wire of 1.5 sq.mm (Green) both are of ISI Hundred Eighty

marked 1.1 KV grade FRLS PVC insulated multi Two And Paise

strand copper wires up to 10 mtr length , in below Seventy Seven

type of pipe erected with 6A Modular type switch / Only

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

246 182.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 809.01 Rupees Eight Pts.

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Hundred Nine

Grade FRLS PVC insulated multi strand copper wires And Paise One

up to 10 mtr length, in below type of pipe erected Only

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

247 141.00 Point wiring for on board Looped Plug with 6A 309.06 Rupees Three Pts.

Modular type switch & 5 pin socket erected on PVC / Hundred Nine

Metallic/Wooden box, single mounting base frame And Paise Six

covered with textured / metallic/white front plate Only

modules erected on / in wall / ceiling with following

type accessories

248 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate , modules erected with

necessary connections as per site situation directed

by Engineer In charge.

114.00 (1)One No. SP 6 Amp. Cat.III 151.50 Rupees One Nos.

114.00 (2) One No 5 pin plug Cat.III 151.50 Rupees One Nos.

5.00 (3) Two Pin/RJ-11 Telephone Socket [a] For one 160.59 Rupees One Nos.

Gang Cat.III Hundred Sixty

And Paise Fifty

100.00 (7) Blank Plate Single Cat.III 25.25 Rupees Twenty Nos.

Twenty Five Only

117.00 (8) Computer RJ-45 socket Cat.III 160.59 Rupees One Nos.

And Paise Fifty

79.00 (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Nos.

79.00 (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Nos.

Ninety Eight Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

249 1170.00 Providing and erecting ISI mark Medium class RIGID 24.24 Rupees Twenty Mtr.

PVC PIPES of following size complete to be erected Four And Paise

on/in wall or ceiling erected with necessary PVC Twenty Four Only

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

1560.00 (b) 25 mm 33.33 Rupees Thirty Mtr.

Three And Paise

Thirty Three Only

250 20.00 Supplying and laying UPVC cable trunking system 277.75 Rupees Two Mtr.

comprising unplasticised polyvinyl, chloride rigid Hundred Seventy

material with ignition free and flame proof confirming Seven And Paise

BS with necessary end caps Internal and external Seventy Five

bend, flat bends, coupler, tee etc..All necessary Only

accessories and measuring of following sizes

(1) 75 mm x 50 mm trunking

0 20.00 (2) 100 mm x 50 mm trunking 428.24 Rupees Four Mtr.

Eight And Paise

Twenty Four Only

251 6680.00 Providing and erecting Mains with 1.1 KV grade FRLS 104.03 Rupees One Mtr.

PVC insulated ISI marked stranded Copper conductor Hundred Four

wire in following type of pipe to be erected concealed And Paise Three

in /flushed on wall/ceiling, with 1.5 sq. mm copper Only

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

252 providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size(a) with medium class Rigid

PVC pipe and accessories

1580.00 (a) 2 wire 4 sq. mm 140.39 Rupees One Mtr.

And Paise Thirty

275.00 (b) 2 wire 6 sq. mm 184.83 Rupees One Mtr.

120.00 (h) 4 wire 6 sq. mm 326.23 Rupees Three Mtr.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

253 Providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

30.00 (f) One wire 10.00 sq. mm 115.14 Rupees One Mtr.

Hundred Fifteen

30.00 (g) One wire 16.00 sq. mm 177.76 Rupees One Mtr

Hundred Seventy

Seven And Paise

Seventy Six Only

0 10.00 (h) One wire 25.00 sq. mm 295.93 Rupees Two Mtr

254 225.00 Supplying and erecting Flexible PVC insulated multi 58.58 Rupees Fifty mtr

strand multi core 1.1 kv grade ISI marked copper Eight And Paise

wires of following size to be erected as directed.. Fifty Eight Only

e) 1.50 Sq.mm 3 core round PVC sheathed

255 150.00 Supplying & erecting approved make Telephone 20.20 Rupees Twenty Mtr.

Cable electrolytic copper conductor PE insulation And Paise

twisted in two pairs, & wrapped with FRLS PVC tape Twenty Only

& sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

256 4680.00 Supplying & erecting approved make LAN cable of 47.47 Rupees Forty Mtr

following size in existing pipe as per direction Seven And Paise

[C] CAT - 6 Forty Seven Only

257 1.00 Providing & erecting main Distribution (MDF) indoor 994.85 Rupees Nine Nos

type, back mounted frame as per DoT standard Hundred Ninety

approved with krone strips Four And Paise

(a) Suitable for 10 pair Eighty Five Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

258 7.00 Providing & erecting Switch board for Computer or 1133.22 Rupees One Nos.

electric apparatus consisting of following modular Thousand One

type accessories mounted with PVC / Metallic Hundred Thirty

concealed/open box with single mounting base frame Three And Paise

covered with textured/metallic /white front Twenty Two Only

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

259 33.00 Supplying and erecting led lamps with following 112.11 Rupees One Nos.

wattage capacity of 220 to 240 voltage, minimum Hundred Twelve

15000 burning hours life, 500 V in built-surge And Paise Eleven

protection,Polycarbonate diffuser, mounting suitable Only

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable

(ii) 5 to 8 watts

260 243.00 Supplying and erecting LED indoor fittings with LEDs 373.70 Rupees Three Nos

of wattage 0.2 Watt to 0.5 Watt assembled on single Hundred Seventy

MCPCB, with housing used as a heat sink shall be Three And Paise

made of thick sheet Steel conforming to IS: Seventy Only

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2kV,IP-20, conventional

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

261 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD <

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

7.00 (A) Square/ Circular shaped Surface/Recessed Mount 758.51 Rupees Seven Nos

Downlight with provision for spring loaded mounting Hundred Fifty

clips complete.IP20 Eight And Paise

(iv) 22-24 watts, Surge-2 kV Fifty One Only

(B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

2.00 (v) 24 watts, 12" x 12" , Surge-2 kV 724.17 Rupees Seven Nos

Cat-lll Hundred Twenty

27.00 (vi) 36 watts, 24" x 24", Surge- 2kV 1794.77 Rupees One Nos

Cat-lll Thousand Seven

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

262 14.00 Supplying and erecting LED street light / Flood light 7186.15 Rupees Seven Nos.

fittings with High power White LEDs wattage of 3 Watt Thousand One

and above assembled on single MCPCB, efficiency Hundred Eighty

more than 130 lm/w and corrosion free High pressure Six And Paise

die cast aluminum housing with smooth finish powder Fifteen Only

coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79

& LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply with

over-voltage protection.

(v) 120 - 159 watts

6.00 (vii) 200 - 250 watts 9196.05 Rupees Nine Nos.

Cat-lll Thousand One

33.00 (A) Street Light (IP-65), Surge protection -4KV 2843.15 Rupees Two Nos.

integral and ,Light must have 440VAC line supply with Thousand Eight

over-voltage protection. Hundred Forty

(i) 36 - 47 watts Three And Paise

Cat-lll Fifteen Only

4.00 (C) Post Top Lantern LED fitting comprises of finish 4096.56 Rupees Four Nos.

cast aluminum spigot and spun aluminum canopy Thousand Ninety

fixed with opal polycarbonate, pipe arrangement for Six And Paise

vertical mounting driver and accessories wired up to Fifty Six Only

terminal block.IP

263 18.00 Pproviding and erecting Approved make Four pole 6790.23 Rupees Six Nos.

moulded case circuit breaker having breaking Thousand Seven

capacity ICU of 25 KA. at 415 V,having normal Hundred Ninety

current rating up to 25 A to 100A. with Fixed thermal And Paise

& magnetic release suitable to work on A.C. supply Twenty Three

50 c/s. with all internal connections, spreader tinned Only

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

264 6.00 Providing and erecting Approved make Four pole 8861.74 Rupees Eight Nos.

moulded case circuit breaker having breaking Thousand Eight

capacity ICU of 35 KA. at 415 V. having normal Hundred Sixty

current rating 125A. with Fixed thermal & magnetic One And Paise

release suitable to work on A.C.supply 50 c/s. with all Seventy Four

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

265 2.00 Providing and erecting Approved make Four pole 17843.67 Rupees Nos

moulded case circuit breaker having breaking Seventeen

capacity ICU of 35 KA. at 415 V. having Normal Thousand Eight

current rating 200A.with variable Thermal & magnetic Hundred Forty

release suitable to work on A.C.supply 50 c/s. with all Three And Paise

Sixty Seven Only

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

266 1.00 pole moulded case circuit breaker having breaking 23041.13 Rupees Twenty Nos.

capacity ICU of 35 KA. and above at 415 V . having Three Thousand

normal current rating 250A. with variable thermal & Forty One And

magnetic release suitable to work on A.C.supply 50 Paise Thirteen

c/s. with all internal connections, spreader tinned Only

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat

267 1.00 Supplying & erecting approved make Four Pole 415V 2611.86 Rupees Two Nos.

change over switch interior for panel mounting with Thousand Six

operating mechanism A.C.23 duty confirming to IS for Hundred Eleven

(A)32-40A And Paise Eighty

Cat,III Six Only

1.00 (E)250A / 320A 13353.21 Rupees Thirteen Nos.

Cat.III Thousand Three

Three And Paise

Twenty One Only

268 Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape

for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

1.40 (A) Suitable for 100 Amp. Capacity 1961.42 Rupees One Rmt

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

1.35 (B) Suitable for 200 Amp. capacity 3202.71 Rupees Three Rmt

1.35 (C) Suitable for 300 Amp. Capacity 4909.61 Rupees Four Rmt

And Paise Sixty

269 3.00 Supplying KITKAT pattern porcelain cut-out fuse with 420.16 Rupees Four Nos.

base of following current capacity erected on existing Hundred Twenty

block board. And Paise

(vi) 200 A. 500 V. Sixteen Only

270 3.00 Supplying Knife / Blade / DIN type HRC fuse link 634.28 Rupees Six Nos.

capable to withstand 80 K.A. confirms to I.S. 13703 Hundred Thirty

for following current capacity Four And Paise

(F) 250 Amp (Size I ) Twenty Eight

271 69.00 providing and erecting Miniature circuit breaker single 297.95 Rupees Two Nos.

pole 0.5A to 2A system and having breaking capacity Hundred Ninety

10 KA to be erected in existing box. confirming to IS Seven And Paise

8828/1996 with ISI Mark Ninety Five Only

272 272.00 providing and erecting Miniature circuit breaker single 123.22 Rupees One Nos.

pole 6A to 25A suitable to operate on 240 V A.C. Hundred Twenty

system and having breaking capacity 10 KA to be Three And Paise

erected in existing box. confirming to IS 8828/1996 Twenty Two Only

273 18.00 Providing & erecting 415 V MCB Four Pole for Motor 736.29 Rupees Seven Nos.

& Inductive Load (C Curve) having 10KA breaking Hundred Thirty

capacity & confirms to IS :8828 in existing box having Six And Paise

following capacity (b)40 Amp. Twenty Nine Only

1.00 (c)63 Amp. 811.03 Rupees Eight Nos

Cat.III Hundred Eleven

And Paise Three

274 Providing & erecting 240 V MCB double pole switch Nos.

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity

30.00 (B) 40 Amp. 362.59 Rupees Three Nos.

Cat.III Hundred Sixty

Fifty Nine Only

275 4.00 Plastic enclosure fitted with DIN rail suitable for 52.52 Rupees Fifty Two Nos.

incorporating One / Two nos. MCB And Paise Fifty

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

276 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)

8.00 (iv)12 way 1492.78 Rupees One Nos.

3.00 (iii)8 way 1152.41 Rupees One Nos.

8.00 (i)4 way 629.23 Rupees Six Nos.

4.00 (B) three phase incoming and single phase horizontal 2913.85 Rupees Two Nos.

type outgoing Per phase isolation type (PPI) Thousand Nine

(b) sheet steel double door Hundred Thirteen

(ii) 6 way And Paise Eighty

7.00 (iii) 8 way 3412.79 Rupees Three Nos.

277 52.00 providing and erecting Approved make RCCBs 2458.34 Rupees Two Nos.

conforming to IS: 12640 and having sensitivity of 30 Thousand Four

mA and Short Circuit withstand capacity of 10 KA and Hundred Fifty

suitable for operation on single phase 240 V,50Hz. Eight And Paise

having characteristic of quick action & tripping with all Thirty Four Only

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

(ii) 40Amps. DP

278 4.00 Providing and erecting metallic vitrified danger notice 69.69 Rupees Sixty Nos.

board as per language suggested by engineer Nine And Paise

incharge for MEDIUM VOLTAGE installation to be Sixty Nine Only

erected as per IS-2551.

279 30.00 Providing and erecting Annealed bare Copper wire 794.87 Rupees Seven kg.

4.064mm to 1.626mm. Hundred Ninety

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

280 6.00 Supplying & erecting earth pit of minimum bore 4591.46 Rupees Four Nos.

dia.150mm size approved make Earthing Electrode Thousand Five

consisting Pipe-in-Pipe Technology as per IS 3043- Hundred Ninety

1987 made of corrosion free hot dipped G.I.Pipes One And Paise

having Outer pipe dia of 50mm having 80-200 Micron Forty Six Only

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover.(approved make

OEM has to submit test certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report

must be submitted. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

281 Providing & erecting weather proof, dust & vermin Rupees Nil

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall

be painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied

with following approved manufacturers with following

9.70 (B) The standard companies switch gear shall be 14902.55 Rupees Fourteen Sq. Mtr

used and only manufacturers at CPRI approved Thousand Nine

factory Hundred Two

(i) with 350mm depth And Paise Fifty

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

282 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables

10.00 (D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 454.50 Rupees Four Mtr

0 50.00 (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 220.18 Rupees Two Mtr

120.00 (F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 648.42 Rupees Six Mtr

Eight And Paise

15.00 (G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 876.68 Rupees Eight Mtr

Hundred Seventy

Sixty Eight Only

283 970.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI 151.50 Rupees One Mtr

armoured cable multistrand / Solid Aluminium Hundred Fifty

conductor for 1.1 KV. to be laid on wall with One And Paise

necessary clamps or in existing trench / pipe of Fifty Only

following size of cables

(B) 4 core 6 Sq. mm

170.00 (C) 4 core 10 Sq. mm 168.67 Rupees One 0.00

Eight And Paise

Sixty Seven Only

284 910.00 Making trench in soft soil of suitable width of 90 cm 55.55 Rupees Fifty Five Mtr.

deep for laying cable or locating the fault all over the And Paise Fifty

run and back filling the same and making the surface Five Only

as normal ground.

285 35.00 Making trench in Hard Murrum / Tar Road of suitable 74.74 Rupees Seventy Mtr.

width of 90 cm or required depth for laying any size Four And Paise

of cable or locating the fault all over the run and back Seventy Four

filling the same and making the surface as normal Only

20.00 (B) If additional machinery like hammer driller or JCB 432.28 Rupees Four Mtr.

use [Add] Hundred Thirty

286 Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting

accessories of same material at required depth in

existing trench for laying of cable. below ground /

road surface for enclosing cable

700.00 (A)50 mm outer dia 62.62 Rupees Sixty Mtr

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

100.00 (B)63mm outer dia 73.73 Rupees Seventy Mtr

Three And Paise

287 10.00 Drilling the road without breaking the road surface 492.88 Rupees Four Mtr.

(Asphalt) for laying of cable for feeding power supply Hundred Ninety

by making up to following size of holes at both ends Two And Paise

complete. Eighty Eight Only

(A) Up to 100 mm bore dia

288 Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

80.00 (B) 2 to 4 core 6 Sq. mm 38.38 Rupees Thirty Nos.

Eight And Paise

Thirty Eight Only

2.00 (C) 2 to 4 core 10 Sq. mm 38.38 Rupees Thirty Nos.

Eight And Paise

Thirty Eight Only

289 0.00 Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

0 2.00 (A) 3 & 1/2 / 4 core 25 Sq. mm 66.66 Rupees Sixty Six Nos.

And Paise Sixty

6.00 (C) 3 & 1/2 core 70 Sq. mm 103.02 Rupees One Nos.

3.00 (E) 3 & 1/2 core 120 Sq. mm 140.39 Rupees One Nos.

And Paise Thirty

290 Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

320.00 (A) 1.5/ 2.5/4/6 Sq.mm 6.06 Rupees Six And Nos.

0 8.00 (C) 16/25 Sq.mm. 15.15 Rupees Fifteen Nos.

And Paise Fifteen

4.00 (D) 35/50 Sq.mm. 20.20 Rupees Twenty Nos.

15.00 (E) 70 Sq.mm. 25.25 Rupees Twenty Nos.

Twenty Five Only

9.00 (G) 120 Sq.mm. 45.45 Rupees Forty Nos.

Forty Five Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

291 182.00 Providing & erecting Approved make Power Saving 1948.29 Rupees One Nos.

50 Watt Ceiling Fan with double ball bearing ISI mark Thousand Nine

with Condenser 230 volt A.C. 50 Hz 1200 mm Hundred Forty

sweep complete having 3blades with aluminium Eight And Paise

blades with , canopy & 30 cm. down rod erected with Twenty Nine Only

earthing.(Make shall be approved by Engineer in

292 182.00 Supplying and erecting 19 / 20 mm. nominal bore 108.07 Rupees One Mtr.

Medium Class M.S. Pipe down rod erected duly Hundred Eight

painted for fan complete with proper insulation without And Paise Seven

leakage and earthing. Only

293 182.00 Supplying & erecting fan hook box of 10 mm M.S. 108.07 Rupees One Nos.

round bar bounded to the RCC bars up to 50mm Hundred Eight

length each side and pierced through a 16 Gauge And Paise Seven

M.S. box / Heavy Duty PVC box complete erected Only

concealed in Ceiling with necessary finishing.

294 182.00 Providing 2.5mm.thick laminated acrylic sheet to 18.18 Rupees Eighteen Nos.

cover the fan hook or Fan box. And Paise

295 4.00 Supplying & erecting approved make low noise 1703.87 Rupees One Nos.

decorative exhaust fan having square frame ABS Thousand Seven

body with inbuilt lowers & square frame. Hundred Three

250mm with 1350 RPM Cat.II And Paise Eighty

296 7.00 Supplying & erecting single phase approved make 2054.34 Rupees Two Nos.

industrial exhaust fan suitable for medium duty ring Thousand Fifty

mounted low noise operation suitable for medium duty Four And Paise

having following dia size and maximum speed in RPM Thirty Four Only

[A] 300-305 mm dia 900 RPM Cat.II

297 1.00 Supplying & erecting IP 55 grade following size 3595.60 Rupees Three Nos.

section pillar fabricated from joint less M.S. Sheet Thousand Five

with angle iron legs made from jointless M.S. Angle Hundred Ninety

with cable clamps to be buried in ground to have Five And Paise

appropriate erection to work uniform until erected with Sixty Only

cement concrete foundation and 45 cm high bricks

work finishing with plaster etc. hinged double door

internally supported on both side, with internal and

outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one

is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS

(B) 75 X 60 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long

made from 35 X 35 X 5 mm thick MS angle.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

298 0.45 Supplying and erecting HYLAM sheet on existing 1927.09 Rupees One Sq.Mtr

angle iron frame.for following thickness Thousand Nine

(E) 10mm Hundred Twenty

Seven And Paise

299 Supplying, erecting, testing, commissioning approved Rupees Nil

make M.S. Polygonal High Mast Pole having following

general Specification.

(a) Polygonal Section fabricated from M.S. Plate

confirms BSEN 10025 & Hot deep galvanized

minimum 65/86 micron (as per IS 2629 /1985)

Lantern carriage with ring and rubber lines for

erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four

(c) Double drum gear pipe motorized winch with 6mm

dia S.S. Rod (For 16 mtr and above size)

(d) Approved make L.E.D. aviation light = 1 No.

Lightening arrestor = 1 No. with necessary wiring of

2.5 sq.mm 5 core ISI copper cable Unarmoured.

(e) Bottom most section suitable for mounting

reversible motor and switchgears having door not

more than 1400mm x 300mm with waterproof gasket

& hinges & locking arrangement.

(f) Pole structure comprises suitable size of reversible

motor, cable and necessary switchgears with control

1.00 (g) bottom section shall have suitable size of 173291.76 Rupees One Nos

thickness supports ribs foundation bolts nuts etc. Lakh(s) Seventy

(h) Item not comprises the cost of lanterns. Three Thousand

(i) Necessary Cement Concrete foundation as per IS Two Hundred

including testing & commissioning of the entire Ninety One And

structure for following size of High Mast poles

[2] High Mast 14 Mtr. TOP A/F 105 Mm, BOTTOM

A/F 400 Mm, No. of Sec. No. - 1, Bottom Thickness -

3 mm, Size Base Plate - dia.520 mm x 16 mm thick,

Foundation Bolt Size M24 x 850 mm, Qty - 8 Nos.,

Suitable for mounting Fitting of Light - 6 Nos.

300 147.00 Providing , erecting , fabricating the M.S. structure as 77.77 Rupees Seventy Kgs.

per requirement on site incorporating proper size of Seven And Paise

M.S. angles,square,round, flats, bars, channels, Seventy Seven

sections complete with cutting, welding, grinding & Only

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering &

finishing complete.

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

301 21.00 Supplying and erecting approved make Octagonal 7561.87 Rupees Seven Nos.

pole made from HR sheet steel. The pole should be Thousand Five

made as per IS. and shall be coated with hot dip Hundred Sixty

galvanizing as per IS 2629/2633/4759, suitable One And Paise

suspend local wind speed with integral Junction box Eighty Seven

consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia,

mm thickness with 200mmX200mmX12mm base

plate, 4-M16 Bolts and 600mm long J-Bolt.Approx

Pole weight 46 kg

302 Supplying and erecting Street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having

nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple

with check nut complete painted with one coat.of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.

9.00 [A] Single Arm bracket 0.5 Mtr 491.87 Rupees Four Nos.

12.00 [B] Double Arm Bracket 0.5 Mtr 622.16 Rupees Six Nos.

303 11.00 Supplying & erecting approved make SMC press 515.10 Rupees Five Nos.

moulded composite FRP. loop-in, loop-out approx. Hundred Fifteen

2mm thick box complete with Bakelite connector strip And Paise Ten

5way(3P+N+E),DIN rail for mounting mob & hinged Only

doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep]

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

304 1.00 Supplying & erecting approved make Digital time 3168.37 Rupees Three Nos.

switch having lithium cell 6 years operative and Thousand One

operate battery backup 1 channel day clock with 14 Hundred Sixty

memory programme, suitable to operate on 240V + Eight And Paise

5%, 16A with, floating contacts Minimum switching Thirty Seven

setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches

& housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed.

305 1.00 Supplying & erecting power contactor ,AC3 duty for 2782.55 Rupees Two Nos.

time switch complete erected as per direction Cat III Thousand Seven

[D] 4 pole 440V 40 Amp. Hundred Eighty

Fifty Five Only

306 4.00 Supplying and erecting horizontal / vertical mounting 12433.10 Rupees Twelve Nos

type storage water heater with copper container Thousand Four

housed in M.S./S.S./ABS body insulated with glass Hundred Thirty

wool/puff complete with heating elements,adjustable Three And Paise

thermostats 300C to 850C, indicating lamp, safety Ten Only

valve, fusible plug, etc.complete erected with coach

bolts, nuts. washers & cementation

(D)35 ltr.with 1.5/2 KW. heating element

Premium Category

(Racold,A.o.Smith,Venus)

4.00 (A) 10 Ltr. with 3 KW. heating element 8373.91 Rupees Eight Nos

Premium Category Thousand Three

(Racold,A.o.Smith,Venus) Hundred Seventy

Three And Paise

Ninety One Only

0 4.00 (D)35 ltr.with 1.5/2 KW. heating element 12433.10 Rupees Twelve Nos

Premium Category Thousand Four

(Racold,A.o.Smith,Venus) Hundred Thirty

Three And Paise

307 3.00 Providing & erecting water cooler having storage 61482.74 Rupees Sixty Nos.

capacity 150 Ltr. & cooling capacity 150 Ltr.per hour One Thousand

@ an ambient temp of 45˚ C. The outlet temp. of the Four Hundred

water should drop by 15˚C within a hour, The water Eighty Two And

cooler should be comprising of hermetically sealed Paise Seventy

compressor, fan motor, condensing unit, water tank Four Only

surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

308 3.00 Supplying & erecting reverse osmosis (RO) water 77891.20 Rupees Seventy Nos.

purification system with M.S. powder coated pedestal Seven Thousand

frame, prefilter housing carbon filter suitable buster Eight Hundred

DC pump, auto low & high pressure switches with Ninety One And

following size of LPH capacity & erected as directed Paise Twenty

[D] 100 LPH with 1 phase / 3 phase Raw water pump

of 500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi),

Dual media filter 10"x54" - (1 No), Micron cartridge

filter 20" x 2.5" ( 1No), High pressure pump 500LPH

@ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO

Membrane housing with RO membrane of 40*40 -

(1No), RO pressure tube 4" x 1E - ( 1No), 0 -

1200LPH Rotameter -(2 Nos), with Recovery Rate

309 4.00 Supplying and erecting approved make panel 1275.63 Rupees One Nos.

mounting type Digital Voltmeter having 3 digits LED Thousand Two

display, 0 to 750 AC Volts range erected on existing Hundred Seventy

panel board with all connection, wiring etc .with Five And Paise

manufacturers calibration certificate. Sixty Three Only

310 4.00 Supplying and erecting approved make panel 1558.43 Rupees One Nos.

mounting type Digital Ammeter having 3 digits LED Thousand Five

display, external CT operated, calibrated for 0 to 1000 Hundred Fifty

Amps suitable to operate on 500 Volt AC , erected on Eight And Paise

existing panel board with all connection, wiring etc Forty Three Only

.with manufacturers calibration certificate.

311 8.00 Supplying and erecting Ammeter / Voltmeter selector 317.14 Rupees Three Nos.

switch for 3 phase AC Supply 500 V on existing panel Hundred

board with necessary connections. Seventeen And

312 12.00 Providing & erecting L.T. Current Transformer with 274.72 Rupees Two Nos.

bar primary 50/5 to 1000/5 ratio 15 VA burden Hundred Seventy

erected in existing CRCA box duly secured with Four And Paise

insulating materials connected to the meter Seventy Two

313 12.00 Supplying and erecting approved make suitable panel 43.43 Rupees Forty Nos

indicator LED type lamp, lens cover, complete Three And Paise

erected with necessary connections. Forty Three Only

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

314 2.00 Supplying & erecting approved make motor control 7722.46 Rupees Seven Nos.

cubical panel (Direct - on - line) made from 16 G. Thousand Seven

CRCA sheet duly epoxy powder painted inside and Hundred Twenty

outside with hinged doors and locking, arrangement Two And Paise

consisting of suitable size of ON- OFF isolator (AC - Forty Six Only

3/23duty) main fuses, single phasing preventer,

indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires

duly socket crimped, main contactor & overload relay,

start - stop push buttons, to be erected on angle iron

frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens

or BCH make only.

(A) DOL up to 5.0 H.P.

315 2.00 Providing & erecting open well horizontal mono block 20621.17 Rupees Twenty Nos.

pump set with cast iron body, complete for three Thousand Six

phase submersible motor having Hundred Twenty

[D] For 5 HP 3 phase open well horizontal mono block One And Paise

pump set suitable for 1350 LPM to 310 LPM @ 10 to Seventeen Only

42 Mtr head suitable for 50/65 mm dia delivery pipe

316 2.00 Lowering of submersible motor pump set at the depth 856.48 Rupees Eight JOb

of following ,complete with required. Nos. and size of Hundred Fifty Six

casing pipes erected by means of proper chain pulley And Paise Forty

block & pipe wrenches after checking of threads of Eight Only

each pipe with coupling to take the load of the pump

set and pipe assembly filled up with water

(D)For Open well Horizontal submersible pump set

317 2.00 Providing Water proof straight Joint in PVC insulated 189.88 Rupees One Nos.

flat flexible copper cable by using insulating material, Hundred Eighty

water proofing material, & making the joint complete. Nine And Paise

(A) Up to 10Sq. mm Eighty Eight Only

318 40.00 Providing and erecting ISI marked PVC insulated 295.93 Rupees Two Mtr

PVC Sheathed Flat flexible Submersible copper Hundred Ninety

cable approved make of following Size. Five And Paise

(E) 3 Core x 10 Sq. mm. Ninety Three

319 Supplying, Erecting, Testing & Commissioning the

passenger / stretcher lift having following main

Quantities Estimate Rate Total amount

Quantities Estimate Rate Total amount

It Rs. In In Words according to

but may Item of Work Unit

No. Figures. estimated

[1] GEAR LESS LIFT DRIVE (MRL) comprising of

High Starting torque Lift 3 phase 440 V A. C.

Permanent Magnet Synchronous motor of proper

rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector

control drive with encoder feedback closed loop

system shall be used for lift car and door operation

which shall be full collective selective operation hall

call demand response, UP/DOWN hall stops, Main,

Up/ Down Contactor with overload and phase

reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate

size and to sustain the impact load cabin + passenger