REPAIRS TO JOINERY, PLUMBING WORKS AND CERTAIN B/R REPAIRS IN HQ SWAC BLDG AND AUDITORIUM AT VSN CHILODA AND MISC B/R REPAIRS TO AREA DRAINAGE, KERB STONE, PCC PATHS, INTERLOCKING TILES AT VSN CHILODA UNDER GE (AF) CHILODA

Amount

Demolition of brickwork or stone/ boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM (1:6) complete all as specified and as directed.

Refixing of demolised old Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for repairs 20mm thick Lakha Red stone to match with existing design with backing coat in CM 1:3, including all moulding and taking down complete all as specified and as directed.

M&L for toughened glass of thickness 12mm of area not exc. 2.50 Sqm cut to shape reqiured with rounded edges fixed with chromium plated screws to floors and walls including necessary fittings and including taking down complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth with 3% WPC (without using extra lime or cement) complete all as specified and as directed.

M&L for preparing of previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for preparing previously unterated surfaces of wall and applying two coats of acrylic emulsion (weather coat) painting over a coat of primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor etc. laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for virified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match but on vertical surfaces/ skirting laid over and including 10mm thick rendering in CM (1:4) as backing coat complete all as specified and as directed.

M&L for anti - termite treatment of wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over and including cement screed in CM (1:4), 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, laid over and including cement screed in CM 1:4, 15mm thick and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 as in repairs of plinth complete all as specified and as directed.

M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub floors, floor bases,or for water tank bases on slab and paving etc complete Finished even & smooth using extra cement all as specified and directed.

S&F in repairs vitreous china white wash hand basin oval type over/ under counterwash basin 560mm x 470mm complete all as specified and as directed. Make : CERA Cat No S2030104 or equivalent as approved by GE.

S&F in repairs 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and as directed.

S&F in repairs vitreous china urinals 375mm x 390mm x 590mm snow white in colour, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including brass screws, pointing around urinal back in cement including fitting such as spreader and outlet discharge pipe, coupling complete all as specified and as directed. Make : CERA S4020112 or equivalent as approved by GE.

S&F in repair cast iron 100mm bore spun cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

S&F in repair cast iron 75mm bore spun cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

S&F in repair cast iron 75mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair cast iron 100mm bore bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F in repair cast iron 75mm bore cowls complete all as specified and as directed.

S&F in repair cast iron 100mm bore cowls complete all as specified and as directed.

S&F in repair cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair cast iron nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110mm bore any radius complete all as specified and as directed.

S&F in repairs PVC "P" trap 125/ 110mm complete all as specified and as directed.

S&F in repairs vitreous china squatting pan of pattern `long pan', size 580mm white with `P' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) complete all as specified and as directed.

S&F in repairs grating doom 150x150mm of brass chromium plated all as specified and directed.

Taking up or down steel tubing pipe and connections 15mm bore complete all as specified and as directed.

S&F 15mm dia tubes ‘medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and Laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and accessories complete fixed to walls/ ceiling or laid to floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15mm bore complete all as specified and as directed.

S&F in repairs bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Cera Cat Part No. CERA F1017151 or equivalent make as approved by GE.

S&F in repairs pillar taps with swan neck spout, cast copper alloy, with capstan heads, chromium plated screwed down highpressure, with or without lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Cera Cat Part No. CERA F1003105 or equivalent make as approved by GE.

S&F in repairs pillar taps with Aquisense Sensor, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed. Make:- Jaquar Cat Part No. SNR-51011 or equivalent make as approved by GE.

S&F in repairs sensor, for urinal chromium plated, screwed down high pressure, with or without lettered screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore complete all as specified and as directed. Make:- Jaquar/ Cera/ Hindware as approved by GE.

S&F in repairs CP angle cock 15mm bore complete all as specified and as directed. Make:- Cera Cat Part No. CERA F1015201 or equivalent make as approved by GE.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs 32mm PVC waste pipe for wash hand basin/ urinal/ sink 600mm long complete all as specified and as directed.

S&F in repairs brass chromium plated 32mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F in repair aluminium anodised plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs toilet paper holder complete all as specified and as directed. Make:- Cera Cat Part No. CERA F5002110 or equivalent make as approved by GE.

Taking down aluminium door and resecuring or easing & adjusting and refixing in same opening for shutter n. exc. 2.0 Sqm complete all as specified and as directed.

S&F in repairs 5.50mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges not exc. 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs aluminium anodised barrel tower bolt 150mm long extruded section complete all as specified and as directed.

All as per Item No. 57 above but 100mm long.

S&F in repairs aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs stainless steel butt hinges medium weight cold rolled of size 100mm by fixing to existing frame complete all as specified and as directed.

Supply, fabricate and fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) two track window (two shutters glazed) with frame, glazed with 4.0mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc. all as specified below, including taking down old window complete all as specified and as directed. (a) Frame (top & side) section shall of size 61.85mm x 31.75mm x 1.50mm. (Section No. 20829) (b) Frame (bottom) section shall of size 61.85mm x 31.75mm x 1.50mm. (Section No. 20830). (c) Top & side members of shutter section shall be be of size 18.00mm x 52.00mm x 1.55mm. (Section No. 20750). (d) Shutter Interlock section shall be be of size 18.00mm x 40.00mm x 1.45mm. (Section No. 20737). (e) Bottom Members of shutter section shall be be of size 18.00mm x 40.00mm x 1.55mm. (Section No. 20736).

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply, fabricate and fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window (two shutters glazed) with frame, glazed with 4.0mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller etc. all as specified below, including taking down old window complete all as specified and as directed. (a) Frame (top & side) section shall of size 92.00mm x 31.75mm x 1.50mm. (Section No. 20831) (b) Frame (bottom) section shall of size 92.00mm x 31.75mm x 1.50mm. (Section No. 20832). (c) Top & side members of shutter section shall be be of size 18.00mm x 40.00mm x 1.55mm. (Section No. 20738). (d) Shutter Interlock section shall be be of size 18.00mm x 40.00mm x 1.45mm. (Section No. 20737). (e) Bottom Members of shutter section shall be be of size 18.00mm x 40.00mm x 1.55mm. (Section No. 20736).

S&F aluminium powder coated minimum thickness of powder coating 50 micron of approved colour ventilator, partially glazed and partially louvers, outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick half portion glazed with 3mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4.0mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperturer with 25mm x 3mm thick aluminium strip with screw to upper half portion of ventilitor all fitting and fixture and fixed in position including taking down of old ventilator complete all as specified and as directed.

S&F aluminium anodized door shutter, aluminium section weighing not less than 0.55Kg/m including necessary jointing cleats, glazing clips rubber neoprene packing including aluminium anodized snap beading screw 5mm thick glass and 12mm thick prelaminated particle board with decorative choice lamination on both sides etc. including taking down old shutter complete all as specified and as directed. (a) 150mm handle - 02 Nos. (b) Mortice lock in built 3 lever - 01 No. in each shutter.

Supply & fixing only aluminium sections suitable for doors, windows and ventilators for repairs to damaged part complete all as specified and as directed.

S&F in repair 4 levers brass Mortice lock vertical type, size 100mm complete all as specified and as directed.

M&L for preparation of surfaces old surface of wall and applying two coats of oil bound distemper over and including 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surface of wall and applying one coat of oil bound distemper complete all as specified and as directed.

S&F in repair door closer hydraulically aluminium extruded section body regulated designation No. 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/ frame to match with vision panels or peep holes, square or rectangular including lipping (supplying and fixing of glass measured separately) and fixed to chowkhats complete all as specified and as directed.

Taking down chowkhats or frames exc. 1.5 sqm and n. exc. 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames n. exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and as directed.

S&F in repairs stainless steel handles 100mm size, fancy type for wall mounted cupboard complete all as specified and as directed.

S&F in repairs aluminium handles 150mm size, cast type, with brass coating complete all as specified and as directed.

M&L for 18/ 19 mm thick prelaminated particle board in repairs, exterior grade, prelaminated both side decorative choice lamination fixed with aluminium frame work complete all as specified and as directed.

S&F in repairs 500Ltrs capacity triple layer rotational moulded polythene water storage tanks (cylindrical vertical with closewed top) hoisted and fixed on roof in position over existing PCC platform including all fittings such as connection pipe pieces with GI tank nipplle for inlet, outlet, washout and over flow etc and including fixing only ball valves complete all as specified and as directed.

S&F in repairs ball valve up to 40mm bore complete all as specified and as directed.

S&F in repairs sinks with drainage board made of high grade stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete all as specified and as directed. Make:- Cera Cat No CERA F 8030105 AB or equivalent make as approved by GE.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair single piece WC with UF soft close seat cover, hinges, dual flush, cistern fittings, fixing accessories and accessories set of size 360mm x 730mm x 740mm, with 'S' trap 300mm complete all as specified and as directed. Make:- Jaquar Cat part No SLS-WHT-6851S300UF or equivalent make as approved by GE.

S&F in repair cylindrical lock 6 levers best quality with SS and duplicate keys for built in wooden door complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc. from 500 litres tanks and from mouth of circulating pipes,.etc including disconnecting existing tanks, setting aside (or lowering if required) for cleaning etc. and reconnecting and refixing in position complete all as specified and as directed.

S&F in repairs sliding lock of aluminum window complete all as specified and as directed.

Dismantling of wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for anodised aluminium snap grid frame work for false ceiling size of grid 605mm x 605mm complete all as specified and as directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40mm x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed.

S&F in repair position glass bricks of approved make of size 195mm x 195mm x 80mm with white cement (1:1) at all heights, with necessary PVC frame etc complete all as specified and as directed.

M&L for 60mm machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS : 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in repairs magnetic catches of size n. exc. 50mm x 15mm, complete all as specified and as directed.

S&F in repairs solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for demolishing existing tiles and taking down carefully any type of water closet or Nahani/ floor trap and demolishing cement concrete in sunken floor slab upto 450mm and applying one coat of cold applied bituminous primer @ 250 grams/ sqm on plastered surfaces including side walls. Thereafter a layer of APP modified membrane in sunken portion over side walls up to the finished floor level shall be plastered with 15 mm thick in cement mortar (1:4), mixed with water proofing compound at the rate of 3% by weight of cement.and filling and mass concrete PCC (1:5:10) type E2 (using 40mm graded stone aggregates) complete all as specified and directed with 3% WPC to weight of cement after satisfactory testing of CI pipes/ joints and slab/ walls by filling water for 72 hours and refixing the the water closet or Nahani/ floor trap and fixing Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) and removing demolished material outside MD land. Note:- CI pipe/ Nahani/ floor trap to be measured and paid seperately.

S&F in repairs 1000 Ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F in repairs polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover complete all as specified and as directed.

M&L chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment, set jointed in neat cement slurry complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in floor finishes and pavings complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Supply and fixing in repairs of wooden acoustic door with teak wood frame of 140 x 90 mm with fire and smoke strip of 10 mm x 4 mm and acoustic hollow EDPM gasket thickness of door shutter 76 mm having infill of density of 48 Kg per cum glass wool sand witched by 12 mm fire rated board and cladded with 6 mm thick commercial ply facing and 3 mm rubber sheet finished with both side 1 mm mica laminate and 25 mm thick teak wood frame around the door pannel including 450 mm long SS handle, door closure and cylindrical lock complete all as specified and directed.

Supply and fixing in repairs 450mm long Brass door handle complete all as specified and directed.

S&F in repair for 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

Supply and fixing frosted glass for aluminium doors with EPDM rubber gasket all round including hacking out old broken glass and removing outside MD land complete all as specified and directed.

M & L for two coat of plastic emulsion paint including preparation of old surfaces on walls or ceiling complete all as specified and directed.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, curtain rod, door spring, hydraulic door closeretc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, drilling nails , minor adjustement of joinery, door etc. including petty repairs materials like screw/nails, plug etc. to make it functional complete all as specified and as directed. Note:-Any items required to be replaced shall be paid under respective items.

Checking of floor, plinth, plaster etc requiring masonary work and carrying out minor repairs such as edges patches n exc 0.5 sqm etc. including petty repairs material like sand , cement and aggregate to make it functional complete all as specified and as directed. Note:-Any items required to be replaced shall be paid under respective items.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fitting / fixtures and any obstruction to water supply, requiring plumber work and carry out minor repairs such as replacement of washers , checknuts, tightening of fitting of flushing cistern etc including petty materials like washers of all sizes, thread (Shoot), M-seal, screws, nails to make water supply / plumbing lines functional and leak proof complete all as specified and as dircted. Note:-Any items required to be replaced shall be paid under respective items.

M & L for sealing gaps between window and wall with silicon sealant of gap n. exc. 5mm all around the periphery of window having area n. exc. 2 sqm complete all as specified and directed.

M & L in repair for 18mm thick PVC board cut to shape required and fixed with screws and glue as in cupboards complete all as specified and directed.

M & L in repair for L type SS hinges, 100mm long fixed to frame or chowkats complete all as specified and directed.

S & F in repairs Plywood, grade BWR, type BB, 18mm thick fixed with screws to timber frame work complete all as specified and directed.

S & F in repair Decorative laminate 0.9mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M & L for false ceiling fixed in repairs including taking down old false celing at all heights with with semi perofrated 12mm thick micro tegular edge GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm oflength 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as specified and directed.

S&F in repairs 2000 ltrs capacity ISI marked rotational moulded triple layer polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including taking down of existing tank complete all as specified and directed by Engineer-in-Charge

M&L preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in repairs metropole flush valve dual flow of 32mm size concealed body type with exposed cut off provision & round flange complete all as specified and directed. Make - Jaquar FLV -1085N or equivalent as approved by GE.

Supply and application of Raincoat on the wall, first by cleaning the surface throughly, open the cracks and look out for for surface soundness, repair the surface and making it sound then filling the cracks with SBR and crack X powder, for larger cracks use Glass fibre mesh, apply coat of Primeseal Primer one coat as priming coat and let it dry for 6hrs and then after applying two coats at interval of 6 to 7 hrs between each of them complete all as specified and directed by Engr-In-Charge.

S & F in repairs 2nd class Hardwood Plain, bedding patti of cross section area n exc 6 Sqcm and fixed withs nails or glued for doors and kitchen cabinets shutters.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4) type B2 (using 20mm graded stone aggregates) in pavement/ hard-standing laid in alternative panels, surface finished even and smooth without using extra cement, including necessary form work, complete all as specified and directed.

M&L Chequred cement concrete tiles 30cm x30cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry , including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L outdoor parking tiles of size 400mmx400mmx10mm thick , set jointed in neat cement slurry, including 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment with 25 mm thickness sand cushioning including spreading in layers complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver blocks 80mm thick any shape and size conforming to IS 15658-2006 of M-40 Grade with grey cement and pigment with 25 mm thickness sand cushioning including spreading in layers complete all as specified and directed.

M & L for dismantling interloving paver block of thickness 60mm and refixing in postion as specified after slope correction complete all as specified and directed.

M & L for dismantling interloving paver block of thickness 80mm and refixing in postion as specified after slope correction complete all as specified and directed.

Dismantling of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) for wall lining (veenering to wall ) 10 mm thick in cement mortar (1:3 )and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Lakha red granite 18 to 20 mm thick (of any type) work (table rubbed and polished) for wall lining (veenering to wall ) 10 mm thick in cement mortar (1:3 )and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F for Dholpur stone 15 to 18mm thick ,cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including 10 mm thick in cement mortar (1:3 ) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as speecifed and directed.

M&L for prepartion of new concrete surface of any description over 10cm girth or width, not otherwise described applying two coats of synthatic enamel paint over a coat of primer complete all as specified and directed.

M&L for prepartion of old concrete surface of any description over 10cm girth or width, not otherwise described applying one coats of synthatic enamel paint complete all as specified and directed.

M&L for preparation of old treated surfaces of kerb stone by complete removing of existing treatment and applying two coat of synthatic enamel paint complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L Preparing of newly plastered surfaces and applying two coats of cement based paint (of approved tint) over a coat of primer complete all as specified and directed.

M&L Preparing of old plastered surfaces and applying one coats of cement base paint (of approved tint) complete all as specified and directed.

M&L Preparing of old plastered surfaces and applying two coats of cement base paint (of approved tint) complete all as specified and directed.

M&L for preparing previously unterated surfaces of wall and applying one coats of Acrylic Emulsion (weather coat) painting over a coat of primer complete all as specified and directed.

Dismantling and refixing of exsiting chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F mild steel work as in post, strauts in fencing incl cutting top to shape as reqd, drilling holes, notching for wire etc flat iron fillets for securing wire mesh and similar work conforming to Fe-410-0 or Fe-310 complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut n.exc 5 cm long and dia 5 to 10 mm complete all as specified and directed.

M&L MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, not otherwise described not exc 10cm width or grith and applying 1 coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantlling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F in Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling of GI barbed wire fencings fixed in RCC/Steel fencing posts complete all as specified and directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any tpe of standard rails straining bolts, incl securing or tying at crossings and provn of galvanised mild steel wire stappled or steel pins, etc complete all as specified and as directed. Note: Each line wire to be measured

S&F in repair galvanised punched type Concertina coils of 1050 mm dia when stretched to 8 mtr length and fixed on angle iron post/ struts with 3.15 mm dia GI wire etc complete all as specified and directed by Engineer-in-charge. Note:- Stretched length of concertina coil shall be measured & paid for.

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 including taking down old complete all as specified and directed.

M&L for Providing cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in coping incl weathering, slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, sides and soffits of floor slab and plinth beams, columns and similar work vertical or batter rough finished surface of concrete complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for Drain cover etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

M&L for nominal mix cement concrete type B1(1:2:4) (20mm graded aggregate) as in cover of drains/manhole and similar work all as specified including nrcessary formwork required complete all as specified and directed.

M&L Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

Ramdev and Sons (BID ID -3079991)

Shree Builders (BID ID -3081083)