AMC of lab buildings of IIP.(Electrical works)2023-24

Amount

wiring for light point/ fan point/ exhaust fan point/ call bell point/ with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Group-C

Wiring for circuit/submain wiring along with earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2x1.5 sq mm + 1x1.5 sq mm earth wire

2x2.5 sq mm + 1x2.5 sq mm earth wire

2x4 sq mm +1x4 sq mm earth wire

2x6 sq mm + 1x6 sq mm earth wire

4x4 sq mm + 2x4 sq mm earth wire

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 X 1.5 sq mm

3 x2.5 sq mm

3 x 4 sq mm

supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following size (nominal size) on surface or in recessed with suitable size of phenolic laminated sheet cover in front including painting etc as required.

100 mmx 100 mmx 60 mm deep

180 mmx 100 mmx 60 mm deep

200 mmx 125 mmx 60 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc as required.

5/6 amps switch

2 way 5/6 amps switch

15/ 16 amps switch

3 pin 5/6 amps socket oulet

6 pin 15/ 16 amps socket oulet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

5/6 amps switch

2 way 5/6 amps switch

15/ 16 amps switch

3 pin 5/6 amps socket oulet

6 pin 15/ 16 amps socket oulet

Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switch in recess etc as required

1 or 2 module (75 mm x 75 mm)

3 module (100 mm x 75 mm)

6 module (200 mm x 75 mm)

8 module (125 mm x 125 mm)

12 module (200 mm x 150 mm)

Supplying and fixing following metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including providing and fixing 6pin 5A & 15 A socket outlet and 15 A piano type switch, connection, painting etc. as required .

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 and 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As required

Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connection etc as required

Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.

Installation,testing and commissioning of pre-wired fluorescent fitting/compact fluorescent fitting of all types,compelete with all accessories and tube etc.directly on ceiling/wall,including connection with 1.5 sq mm FR PVC insulated copper conductor,single core cable and earthing etc. as required.

installation, testing and commissioning of ceiling fan, including wiring the down rod of standrand lenght ( up to 30cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. As required

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as requied upto 450 mm .

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required.

1 run of cable

Providing and fixing following rating and breaking capacity MCCB in existing cubical panel board including drilling holes in cubical panel, making connections etc as required

200 Amp, 25 KA, TP MCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required

12 way, (4 + 36) double door

Supplying and fixing 5 amps to 32 amps rating, 240v/ 415v, "C" curve, miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. As required

single pole (Modular Type)

Single pole and neutral

Double pole

Tripple pole

Tripple pole and neutral

supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connetionx, testing and commissioning etc. as required.

supplying and fixing following rating, four pole, 415V, isolator in the existing mcb db complete with connection, testing and commissioning etc. As reqired.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in existing RCC / HUME / METAL pipe etc. As required.

upto 35 sq mm

Above 35 sq mm and upto 95 sq mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in existing masonry open duct as required etc. As required.

upto 35 sq mm

Above 35 sq mm and upto 95 sq mm

Laying and fixing of one number PVC inslulated and PVC sheated/ XLPE power cable of 1.1KV grade of following size on wall surface as required.

upto 35 sq mm (clamped with 1mm thick saddle)

Above 35 sq mm and upto 95 sq mm(clamped with 25x3mm MS flat clamp)

Above 95 sq mm and upto 185 sq mm(clamped with 25/40x3mm MS flat clamp)

Supplying and fixing 32/40 mm dia x 2.00 meters long G.I pipe (meidum class) bracket for mounting of fiuorscent/ HPMV/ HPSV street light fitting on pole including bending shape, 2 nos. 40 mmx 3mm flat iron clamps with nuts, bolts andthe pipe to the require washer, painting the flat iron primer and finish piant etc as required.

Excavation for cable trenches in soft soil depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soi, refilling with sand or good soil after laying of cable/pipe etc. in layers of 20 cm, ramming watreing and disposal of surplus excavated soil as directed, witinh a lead of 50 meters.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology base occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10A, for mounting height up to 2.8 meter and 5 meter diameter coverage area along with necessary fixing arrangements i/c programming at site complete as required.

Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars/ Lighitng DBs for automatic switching On & OFF of street lights at sun set & sun reise or twilight (Auto ON,OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.

1 out put per phase suitable for single phase supply

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing et. complete s required.

Supply of labour for attending day to day complaints complaints of electrical maintenance work for repair and replacement of all electrical accessories in non working electrical fittings and fixture (such main boards, fans, geysers switches, sockets, light fittings, motors, starters, street light, energy meters in lab buildings, underground and overhead line distribution network including service main, operation and maintenance 33KV 044KV substation and power house (24 hour round the clock) all other electrical work as assigned by site-incharge.

Skilled labour in Electrical trade

Unskilled labour in Electrical trade

Attending day to day complaints of no light/ non working points / providing temporary connections in IIP lab buildings, hostel & guest house etc as required.

Supplying and fixing RJ45 outlet information module in exsiting modular box etc as required.

Supplying, fixing and commissioning of Industrial Heavy duty exhaust fan of 380 mm sweep 1400 rpm/Turboforce neo SP, HD suitable for 230v 50hz ac supply complete with blade, regular, frame and moving system etc as required .The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and laying of following size ISI marked PVC insulated and PVC sheathed/XLPE /FRLS aluminium conductor steel armoured alumimium cable of 1.1KV grade as required.

2 X 16 sqmm

3.5 x 70 sq mm

Supplying and fixing following rating 415/230v C series, miniture circuit breaker suitable for lighting and other load of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required.

Double pole, 63 amps

Tripple pole and neural, 63 amps

Supply and fabrication of sheet steel MCB enclosure fitted with din rail for MCB of following rating complete with connections including drilling holes etc as required.

Double pole enclosure

Four pole enclosure

Supply and replacemant of capacitor of ceiling fans/ exhaust fan/ wall fan/ padestal fan of size of 2.5 to 4 mfd etc as required

Supply & replacement of 16 Amp. Plug top, 3 pin

Supply & replacement of 6 Amp. Plug top, 3 pin

supply and fixing of following LED energy saving surface/ pendent mounting LED lamp fitting with powder coated /batten with in bulit electronic ballast with decortive end caps etc. as required.

1 X 4' X 22W LED, 6500 K luminaries with tube rod.

2 X 4' X 20W LED luminaries with tube rod.

supplying and fixing following high efficiency LED tube rod lamps LED luminaire in existing fitting fixture with connection etc. as required.

4' X 20W LED luminaries tube rod.

Supplying and fixing LED tube rod 18 Watt 2 feet single side connection Ultra bright LED Polycarbonate tube rod with high efficinsy for installation in existing suitable fittings.

supply and commissioning of indoor recess/ surface 600X600mm (2'X2') LED luminaire 42w with high luman package etc as required.The product features special glare cut optics to ensure low luminaire luminance and is perfect for general and office lighting applications such as workstations, meeting rooms and cabins,corridors and break areas.(Havells/ Wipro/ Philiphs/ c&s) The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and fixing 25 Watt, 6500K new generation LED post of lanturn light luminare IP 65, energy saving, enviornmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium lad scape luminaire with high power LEDs as light souce. Clear cover offers bright illumination for different application. (Havells/ Wipro/ Philiphs/ c&s). The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

S/R of following Watt LED strret luminaire, New genration energy savin and enviornmental friendly long life LED street light made uo of pressure die cast aluminium housing with high efficiency LED s lighting source and Toughened glass having bottom opening seperate driver compartment with IP 66 protection and impact Resistance of IK07. (Bajaj/ Havells/Philiphs/WIPRO). The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

30 W led luminaire

Supplying and fixing Surface/Recess Mounting LED Panel fitting fixture 15 W ( 1"X 1"), Elegantly designed sleek recessed mounted pressure die- cast alumium luminaire in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and indepndent elctronic LED driver with connection all etc as required. The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and drawing folowing size of PVC insulated Aluminium flat twin core weather proof cabe in existing pipe or surface etc as required.

2x6 sq mm

Supplying of Wall fan of 400 mm sweep, 5 STAR ,energy saving, decorative pacer model(white/brown/lovery) suitable for 230 V, single phase, 50 Hz supply including all etc…as required. (Havells/Bajaj/Usha).The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and fixing 50 W turbo LED FLOODLIGHT luminaure, Energy saving, enviornmental friendly, long life, one desig for aesthetic consistancy in multi purpose application with SMD LEDs as light source with driver included, suitable for highliting architectural features or area lighting. also suitable to rough services/ installations.( Bajaj/ Philiphs/Havells/Wipro).The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and fixing of monkey guard fixtures(iron/steel cover) for protection of post of lanturns light fitting with all as required. Material designing must be discussed with enginer in charge and before supplying its design approval must be taken by engineer in charge.

Providing and fixing 9 watt retrofit LED bulbs for guest house etc…as required.

Supplying and laying of following size ISI marked ABC conductor PE insulated 0.50 mmJELLY FIELD Unarmoured telephone cable for under ground uses etc. as required.

SITC of following size ISI marked Mild steelTelephone MDF Boxeswith IP44 for Unarmoured telephone cable connections with all etc. as required.

10 Pair/20 PAIR

SITC of following size ISI marked Telephone cable jointing kit for Unarmoured telephone cable connections for underground cables with all etc. as required.

10 Pair/20 PAIR

DOON LIGHT ASSOCIATES