SPECIAL REPAIR OF 06 X TOILET BLOCKS IN BLDG NO P-904 AT NO 2 TRAINING BATTALION, BEG AND CENTRE ROORKEE

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

M&L for except brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer instruction (but excluding the cost of water proofing liquid) external surface complete all as specified and directed

Supply only Liquid water proofing compound of approved make.

M&L For Rendering 5 mm thick in cement mortar 1:3 on concrete/brick surfaces in ceiling, finished fair & even complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, stanchions, beams, etc including all laps, cutting and waste complete all as specified and directed

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified and directed.

M&L for applying two coats of cement base paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surfaces and 1 mm wall care putty complete all as specified and directed.

M&L for three coat of white wash on New surfaces Ceiling including all prepration complete all as specified & directed

M&L for preparation of old decorated surfaces (plastered/un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint including 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bond emulsion by using rollers including 1 mm wall care putty complete all as specified and directed.

Taking down old U/S chowkhat with shutter nexc 1.50 sqm each and removing from site complete all as specified and directed

All as per item No. 17 above but exc 1.5 and nexc 4 sqm

Taking down shutter from the frame of any discription n.exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, towe bolt complete without glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat, ladders, framed balusters, walk ways, railings, framework of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, in opening as per specification of drawing complete all as specified and directed.

M&L for solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed.

S&F 100 mm long (size) butt hinges, Mild steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed.

S&F 200 mm long anodised aluminium tower bolt complete fixing to door complete all as specified and directed

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm size long complete all as specified and directed.

S&F 300mm long Aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete (1:2:4) Type B-1 as required all as specified and as directed.

S&F 1.25 mm thick mild steel plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up complete all as specified and directed.

M&L preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed.

Demolition of concrete of any description in any position complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs of any description or thickness in floors, aprons etc complete all as specified and directed

M&L for 75 mm thick PCC (1:3:6) as in plinth protection surface finish even and smooth without using extra cement complete all as specified and directed

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc,18 sqm in floor etc set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L glazed ceramic tiles 450x350x/7/600x300x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (40mm crushed stone aggt) as in foundation, flooring sub base, mass concrete complete all as specified and directed

M&L for 18 to 20mm thick granite stone as in platforms/ counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggt as in sub floor/roof/chajja complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

Dismantling of floor of WC and bath not exc 600mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area for payment measure net floor area. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.

Dismantling cast iron work of any description complete all as specified and directed

S&F110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

ditto but fixed in wall 110 mm

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

ditto but fixed in wall 75 mm

S&F PVC SWR bends any radius 75mm dia with access door or without access door complete all as specified and directed.

S&F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specified and directed.

S&F PVC SWR vent cowl 110 mm dia complete all as specified and directed.

S&F for 110mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F 75 mm PVC (SWR) couplers complete all as specified and directed.

S&F 110 mm PVC (SWR) couplers complete all as specified and directed.

S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and directed.

S&F for 2000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple complete all as specified in SSR Pt-I.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair WC vitreous china, squatting pan orissa patern size 580x440mm white with intergral foot rest & P or S trap, flush pipie complete excluding cistern complete all as specified.

S&F in repair WC vitreous china, (pedestal patern) white (excluding flushing cistern and flush pipes) including seat cover fixing bolt & P or S trap, flush pipie complete all as specified.and directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ccomplete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as specified and directed.

S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directeed

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed

S&F in repair CP shower rose with or without swivel joints of 15 mm size complete all as specified and directed

M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed

S&F in repair Vitreous China wash basin oval type white size 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipe and PTMT Spreader complete all as specified and directed.

S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.

S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed

S&F in repair 15 mm bore cast copper alloy stop valve, fancy type chromimum plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed.

S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed

S&F in repair Vitreous China bowl urinal flat back, size of 465 x355x265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in CM (1:2) securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed

S&F in repairs CP grating round 150 mm size complete all as specified and directed.

S&F of Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and as directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets all as specified and as directed by engineer in charge.

S&F in repair Stainless steel chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for providing PCC (1:2:4) 20 mm gragaded aggregate in landings, cover slabs (for man holes etc) chullah hoods chajja water trough shelves and similars articles with plain face including demolition of RCC slab any type complete all as specified and directed.

Dismantling and taking down carefully U/S copper/aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/ service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

M&L for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface, provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way non modular switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way non modular switch complete all specified and directed.

All as per item No 89 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed.

S&F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz complete all specified and directed

S&F socket out let 2 in 1, 3 pin, 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz complete all specified and directed

M&L ceiling rose 3 terminal/PVC/polycarbonate, isolated body complete all specified and directed

S&F sheet metal enclosures with metal socket and plug top Single pole and neutral enclosure with a two pin and earth plug and socket complete ISI marked, 230/240 volts, 50 hz with one single pole MCB SP 20 Amps complete all specified and directed.

S&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with suitable rated copper busbar, minimum ingress protection of IP40 complete all specified and directed.

S&F MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F in repair LED tube light batten 20 watts 4 fts extruded aluminium housing, translucent diffuser with LED light source, minimum 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F in repair Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories complete all specified and directed.

S&F sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all specified and directed.

S&F sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.0 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

S&F in repair Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep, RPM not less than 1100 RPM complete with louvers shutter including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all specified and directed.

S&F in replacement electric water heater,storage type steel body with stainless steel inner tank and heating element upto 1.5/ 2 KW capacity 25 litre, BEE 5 Star rated, ISI Marked, 240 V, 50 Hz complete with all accessories such as safety valve, thermostate, NRV, Hot and cold water connection PVC pipe all as specified and directed. Note: Old electric water heater to be submitted to AGE E/M store yard.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS-H insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed. Note : - The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing upto depth.

Taking up or down galvanised steel tubing and connections of any size and type complete all as directed for following sizes :-

15 mm bore

20 mm bore

25 mm bore

S&F or lay in trenches galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc fixed to walls and ceiling or laid in floors complete all as specified and directed of the following bore :-

15mm bore

20 mm bore

25 mm bore

Drilling and tapping GI water mains 50mm bore (in position) for branch connections of the internal dia 20mm, complete all as specified and directed.

S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 20 mm bore pipe, complete all as specified and directed.

S&F Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore complete all as specified & directed

Excavation in trenches not exc.1.5 mtr wide and not exc 1.5 mtr depth in any type of soil (soft/loose) for laying/taking up/ taking down of water pipes of any size and type including levelling of bottom surface to required level complete all as specified & directed

Returning filling in trenches including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified & directed

Removing excavated material from site to a distance n. exc. 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr avove the starting point complete all as specified & directed.

BHAGAT JI ENTERPRISES (BID ID -3457055)

OMVIN ENTERPRISES LLP (BID ID -3462894)

VINAYAK CONSTRUCTION COMPANY (BID ID -3456452)

RAJENDER CONSTRUCTION CO (BID ID -3453656)

IRFANAHMAD CONTRACTOR (BID ID -3457915)

M/s Chittar Mal & Co. (BID ID -3462840)