Karnataka

AOC

Works

Canals including Lining and Structures

Repairs to lining, Embankment, Removal of silt, Clearing jungle of D-66 From Ch 3 to 14 Km (at selected reaches), D-66 RBC & minors coming under HLBC.

Cauvery Neeravari Nigam Limited

CNNL No 6 HLBC Div Pandavapura | Mandya, Karnataka

Amount: ₹10.9 LCloses: 20 Jun 2026Closed

Timeline

Published11 Jun 2026
Closed20 Jun 2026
Awarded—

Bids

1 Bid20 Jun 2026

#	Company	Amount	Status
1	ASHOKA N G ₹6.7 Laccepted-aoc	₹6.7 L	accepted-aoc

Tender Value

₹10.9 L

EMD Value

₹27,500

Closing Date

20 Jun 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Raghavendra

Mobile Number

Work Description

Repairs to lining, Embankment, Removal of silt, Clearing jungle of D-66 From Ch 3 to 14 Km (at selected reaches), D-66 RBC & minors coming under HLBC.

Tender Information

Tender ID

CNNL/2026-27/CN/WORK_INDENT5088

Reference Number

CNNL/2026-27/CN/WORK_INDENT5088

Tender Type

Open

Product Category

Canals including Lining and Structures

Form of Contract

Electronic Documents, First(One Cover)

Location

CNNL No 6 HLBC Div Pandavapura

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate of last five years certified by CA Along With Valid UDIN

RequiredSimilar nature of work done certificate

RequiredGST Registration Certificate

RequiredClass-IV And Above Contractor registration certificate in KPWD

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will be rejected

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs

The tender processing fee will neither be refunded nor will be transferred to other works

The CNNL reserves the right of rejecting any or all of the tenders without assigning any reason and will not be bound to accept the lowest tender

The rates quoted by the contractor shall be Excluding of GST. The bidder shall also quote the rates Excluding of GST

Contractor has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval

The work includes all lead and lift and work shall be carried out as per the instructions of the Engineer-in-Charge of the work

The validity period for E.M.D. shall be for a minimum period of 135 days from the date of submission of tenders

All the conditions prescribed in the CNNL Tender Document should be followed. As per circular No.CNNL.Cicular-1/2015-16/ Dated:26-12-2015 third party inspecting agency for the said work will be engaged, apart from the Quality Control and field tests of the Nigama and contractor should co-operate with the third party test and Quality Control authorities

Any necessary documents can be uploaded in spaces provided for general documents in upload document section.

In addition to the above, all the conditions, as stipulated in the tender booklet of CNNL should be followed

One percent (1%) of the bill amount of the successful tenderer will be KPP Portal deducted towards the construction labour welfare fund as per Government Order LD / 300 / LET / 2006 Bangalore dated 18-01-2007 and Government letter No. PW / 134 / BMS / 2007 dated 27-07-2007

Further details and information, if any, required can be had from the Office of the Executive Engineer, No.6 HLBC Division, CNNL, Pandavapura, Karnataka, on all working days during office hours

In case of arising of any dispute between the Executive Engineer and contractor, the clause-29 of PWG 65 is applicable

The employer is not responsible for any delay in accessing kppp Portal

Royalty Recovery from the contractors bill will be made as per Government Circular No.CI 115/MMN 2019, Bangalore Date:30-06-2020 & Circular from the office of Director Mine & Geology Department Dt: 03-07-2020 & further any Orders/Circulars issued by Government Of Karnataka from time to time

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. a)The percentage quoted by the contractor must be inclusive of sales Tax and any other duties, taxes etc.,(Excluding excise duty) The contractor is also required to pay quarry Fees, Royalties, Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra payment on this account will be made to the contractor

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use on the work at their own cost

All the formats prescribed in the bid document shall be filled by the tenderer in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

The undersigned reserves the right to either postpone or to cancel the entire process of tender

Security Deposit :- Security Deposit Will be with held till the expiry of the defect liability period

Within 5 days of receipt of the letter of acceptance, the successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of the contract price plus additional security for unbalanced tenders in accordance with clause 20.4 of ITT a)Cash b)Bankers cheque or Demand draft or pay order in favor of Executive Engineer, No 6 H.L.B.C Division, CNNL, Pandavapura, Payable at Pandavapura or c)Specified Small Savings instruments pledged to Executive Engineer, No 6 H.L.B.C Division, CNNL, Pandavapura. If tenderer fail to satisfy above requirement shall constitute sufficient grounds for cancellation of the award and forfeiture of the EMD

Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements or record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in Kppp portal completion, litigation history, or financial failures etc.

The intending bidder should furnish the KPWD Class IV & Above Contractor certificate of registration issued by State/Central govt. organization

GST Registration along with GST clearance certificate for the financial year 2025-26 should be uploaded

A copy of income tax return fled for the financial year 2021-22 to 2025-26

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e 2021-22 to 2025-26 achieved in at least two financial years a minimum financial turnover of value not less than the Estimated annual payment under this contract i.e.10.87 Lakhs

If the rate(s) quoted by any tenderer for any item(s) is/are below the estimated rates of the department. Then, the contractor shall furnish Additional performance security in the form of FD/NSC for an amount equivalent to the difference between the cost as per the quoted rate and estimate rate. in case contractor quoting rate above 125% of the estimated rates then the amount over and above 125% will be withheld during the progress of work

Defect liability period for Silt Removal & other small works 06 months & for concrete and other Repair works it shall be 01 year from the date of issue of Completion Certificate

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value.The available tender capacity will be calculated as under Assessed available tender capacity (AxNx2.5- B) Where, A -Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress.N -Number of years prescribed for completion of the works for which tenders are invited. B -Value, at 2026-27 prices level, of existing commitments and on-going works to be completed during the next one months (period of completion of the works for which Tenders are invited) Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be counter signed by the Employer in charge, not below the rank of an Executive Engineer or equivalent

The bidder should satisfactorily completed at least one similar work to an extent of 50% of the cost of work i.e 5.43 lakhs in last five years i.e., from 2021-22 to 2025-26

The contractor should obtain the material dispatch permit for stone, aggregates, sand and murrum etc. will be used in the construction work from the mines and geology department at the time of execution and same should be submitted along with the work bill, then for such work bills no royalty will be deducted. if the contractor failed to submit the material dispatch permit (MDP) along with the work bill five times royalty will be deducted from the work bill as per KMMCR 2016 amendment rule 44(4) and circular vide no.Ga,Bhu.E/DCB/DCB/takte/2019-20/4497 dated:12.12.19 by mines and geology department

The rates quoted by the contractor must be inclusive of all taxes, etc. (Excluding GST). The contractor is also required to pay quarry Fees, Royalties, octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹27,500

Important Dates

Last Activity

20 Jun 2026

Published

11 Jun 2026

Download Ends

19 Jun 2026

BOQ Preview

•

Repairs to lining, Embankment, Removal of silt, Clearing jungle of D-66 From Ch 3 to 14 Km (at selected reaches), D-66 RBC & minors coming under HLBC.

•

Clearing and grubbing road land including uprooting rank

•

vegetation, grass, bushes, shrubs, saplings and trees girth up to

•

300 mm, removal of stumps of trees cut earlier and disposal of

•

unserviceable ...

•

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machin...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications including setting out, shoring, strutting, barricading, caution lig...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

RCC NP 3 1200mm dia. Complete with all lead and lifts, loading and unloading charges and as directed by Engineer-in-charge of the work.

•

RCC NP 3 600mm dia. Complete with all lead and lifts, loading and unloading charges and as directed by Engineer-in-charge of the work.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Bid Document KW-1 GEN 5088 PANDAVAPURA.doc

Tender Document • 2.74 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ASHOKA N G

₹6.7 Laccepted-aoc