Renewal of Sisaiya Isanagar Katauli Jamdari Durgapur Padri Road ODR

Providing and laying slurry seal consisting of a mixture of fine aggregates, portland cement filler, bituminous emulsion and water on a road surface including cleaning of surface, mixing of slurry seal in a suitable mobile plant, laying and compacting to provide even riding surface

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm using mechanical means.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Providing & laying of hot applied thermoplastic compound 2.5 mm thick including rectrorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is inclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free form streaks and holes. Rates to be inclusive of all taxes, royalty, VAT etc and all T&P / machine material and labour required for proper completion of work. (MORT & H No 803)

Providing & laying of hot applied thermoplastic compound 5 mm thick including rectrorising glass beads @ 500 gms per sqm area, thickness of 5 mm is inclusive of surface applied glass beads as per IRC:35-2015.The finished surface to be level, uniform and free form streaks and holes. as per lucknow circle SOR rate.(Repeted Bar Marking)

S/f of Pavement Maker (Cat eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound.The housing shall contain prismatic two glass covered prismatic reflective face to reflect.

Please Enable Macros to View BoQ information