Renovation of Toilet blocks and other Civil Repair Works at Secretariat Gymkhana, Sector-21, Gandhinagar

No figures

1 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) 5.00 Cmt 1110.75

R.C.C. work

2 Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable 14.00 Cmt 577.92

materials with all lead and lift. (ii) In Cement Mortar.

3 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable 522.00 Smt 50.11

materials with all lead and lift.

4 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of 257.00 Smt 20.55

serviceable material and disposal of unserviceable from site of work with all lead and lift

5 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of 240.00 Smt 56.79

unserviceable materials with all lead and lift. (ii) A.C. or any type of sheet roofing.

6 Dismentling doors, windows, ventilators etc. (wood or steel or any other material) shutters including chowkhats 55.00 No 197.09

architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding

Sq.M. in area.

7 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other 5.00 No 263.90

attachment etc. complete and stacking them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

8 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with 60.00 Rmt 78.51

all lead and lift ( for any dia, of pipe)

9 Dismantling sanitary fittings like wash basin, W.C. pan Indian and European type, flushing tank etc. including stacking the 47.00 No 425.93

materials with all lead and lift.

10 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the 65.00 Cmt 123.13

excavated stuff upto 50 Meter lead. (A) Loose or soft soil

11 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and 4.00 Cmt 136.30

disposing off the excavated stuff upto 50 Meter lead. (A) Loose or soft soil

12 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) 96.00 Cmt 3758.19

and curing complete excluding cost of formwork in (A) Foundation and Plinth

13 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and 2.00 Cmt 4705.07

reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

14 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and 4.00 Cmt 6540.89

reinforcement for reinforced concrete work in ( C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level.

15 Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and 3.00 Cmt 4416.53

reinforcement for reinforced concrete work in ( C) Column upto floor two level.

16 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 15.00 Cmt 136.92

cm. in depth consolidating No disposited layer by ramming and watering.

17 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete 1075.00 Kg 77.29

upto floor two level

18 Providing and applying white cement slurry coat mixed with approved integral waterproofing approved compound over 2276.00 Smt 181.48

existing China mosaic terrace for filling all joints, gaps and cracks, including thorough cleaning and scrubbing of surface

before application, proper rubbing/finishing, curing, cleaning after completion, and dismantling & re-forming cement

mortar vata with waterproofing compound, complete with all materials, labour, tools and tackles as directed by Engineer-

19 Providing Material & Labour For Fixing Glass Doors (Size upto 3000mm x 2400mm As per site Required) Using Patch 45.00 Smt 8852.23

fitting & 10 to 12mm thick Toughened Glass including fixing of all required accessories of approved brand as per detailed

drawing / as directed by Engineer In-charge etc.complete. Including Floor Spring, S.S. Pipe Handle for door 30 Cm x 20 mm

20 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 120.00 Rmt 253.82

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [C] 25 mm.

21 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 160.00 Rmt 208.80

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [B] 20 mm.

22 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside 120.00 Rmt 339.05

Dia. Low densidy, complete with special falnge compression type fittings, wall clips etc. including making good the wall

ceiling and floor. (G)110 mm

Item Rate In

Description of Item Quantity Unit Amount

No figures

23 Providing & fixing Bronze Gate Valve Ball Valve ISI mark of make zoloto or equivalent as approved by Engineer In Charge. 20.00 No 1582.44

complete with using bonding materials rates are including of making good the wall ceiling & floor etc. Complete for 25 mm

24 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq.Cm. in foundation, 9.00 Cmt 4244.85

plinth and all floors in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

25 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. inCement 33.00 Smt 629.80

mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation, plinth and all floors (B) Conventional

26 Providing 15 mm. thick cement plaster in single coat malla on rough side of half brick wall for interior plastering finished 255.00 Smt 185.41

even and smooth for All floor level including curing etc. complete. in Cement mortar 1:3 (1 cement : 3 fine sand)

27 20 mm. thick sand face cement plaster on walls for all floors above ground level consisting of 12 mm. thick backing coat of 150.00 Smt 315.69

C.M. 1:3 (1 cement : 3 sand) and 8 mm. thick finishing coat of C.M. 1:1 (1 cement :1 sand) including making groove at

required distance as directed by architect or engineer in charge etc. complete.

28 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 439.00 Smt 1120.36

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (or approved

29 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 10mm thick cement 12.00 Smt 1114.09

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (or approved size)

30 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement 247.00 Smt 1017.30

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement etc. complete for all floor. (or

approved size)

31 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, 165.00 Smt 1513.28

risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry

etc. complete for all floor. (or approved size)

32 Providing and laying 16 to18 mm thick polished Granite stone slab machine cut in single piece in sill and jambs or dedo 39.00 Smt 2833.77

laid on 10 mm thick polymer modified cement based tile adhesive and jointed withgrey cement slurry incl. rubbing and

polishing etc complete. For all floor as directed by architect or engineer in-charge.

33 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to 244.00 Smt 779.70

be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

34 Providing and fixing flat back wash basin of wall mounted 550 x 400 mm size Mario Starwhite with C.I. or M.S. bracket 15.00 No 7509.10

including cutting holes and making good the same including fixing C.P. brass and Angular stop Cock , C.P. brass extension

nipple 62mm long, S.S. flange water super connection pipe 60cm. long and full thread waste coupling etc. complete for all

35 Providing and fixing Star white wash down water closet squatting pan EWC (Wall hung type W.C. Pan) with Premium seat 8.00 No 12252.98

cover including jet sprey with integral 'P' or 'S' trap including jointing the trap with C. I. soil pipe in C.M. 1:1 including seat

cover, premium Health Fauset with hook and fittings and 25 mm dia Flush Cock with C. P. brass wall flange etc. complete

36 Providing and fixing water closet squatting Pan (Orrisa type W.C. Pan) size 580mm x 400mm (A) Vitreous China.(I) Long 6.00 No 1275.66

pattern = White colour including fixing of 100mm size P or S trap for water closet squatting pan including jointing the trap

with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)

37 Providing and fixing CAPRIANA series urinal of cera or equivalent, including all necerssary accesosries like waste coupling, 15.00 No 10221.20

waste pipe connection, water inlet pipe connection etc. complete as directed by engineer in charge

38 Providing & fixing Single shutter Door of 100 x 45mm WPC (Wood Plastic Composite) solid door frame of 0.9 density with 37.00 Smt 7756.91

32 mm thick solid core wodden Flush door with decorative pattern 1mm lamination on both side with Edge beading

surrounding shutter & including S S Aldrop 250mm, Pull handels of size 200mm long SS grade 316 with 10mm dia tower

bolt , SS 316 Hinges of size 102mm, 76mmx30, etc complete as directed by Engineer in charge.

39 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress roofing sheets shutter having extra 30.00 Smt 2377.76

reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected fire

retardant grade polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with necessary screws & alluminium fixtures & fastenings & fastener sleeve.

40 Providing and fixing Aluminum door partly glazed & partly roofing sheetsed door of approved colour Anodised and 32.00 Smt 4603.35

standard extruded aluminum frame having wt. @ 1.301 Kg/Rmt. with provided single door shutters having bottom rail

having wt. 1.19 Kg/Rmt. Lock, Top & style having wt. 1.50Kg/Rmt 1 Vertical rail having wt. 1.30 Kg/Rmt and glazing

clips having wt. 0.124 Kg/Rmt with 5mm thick float glass silicon gasket and 5-6mm Pre-laminated board at bottom as

per drawings or directed by Engineer in charge 1-nos of pivot/ Hinges 3 nos 125mm, D type 200, Alluminium handle

nos, lock of Approved Quality 1 nos, Towerbolt 1 No , including fixtures & Fastening etc. Complete.

41 Providing and fixing toilet cubical with 11 mm compact both side laminates board with vertical alluminium S.S. finish 12 30.00 Smt 9403.10

mm Big U type heavy section alluminium S.S. finish 12 mm top rail, H Door edge, with necessary fitting S.S. matt door lock,

clothes hook, S.S. door support leg, S.S. matt door nop etc. comp.

Item Rate In

Description of Item Quantity Unit Amount

No figures

42 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with 8.00 Smt 1175.56

colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation.

43 Providing and fixing C.P.Brass screw down bib cock of approved brand as directed by engineer in charge with flange polish 38.00 No 1219.58

bright 15mm dia. with C.P.brass extension nipple 62mm long if required etc. complete for all floor.

44 Providing and fixing flush valve with C. P. brass wall flange for WC indian or european type WC includign all tools required 18.00 No 2130.47

complete for all floor as directed by engineer in charge.

45 Providing and fixing C.P.Brass Angular Stop cock Polish bright 20mm dia. with C.P.brass extension nipple 62mm long if 23.00 No 969.85

required etc. complete for all floor.

46 Providing and fixing C.P.Brass pillar cock Polish bright 20mm dia. with C.P.brass extension nipple of required sizelong etc. 20.00 No 2203.95

complete for all floor.

47 Providing and fixing 3 flow overhead shower with classik Shower Arm with 15mm or 20mm or 25mm.inlet. as directed by 12.00 No 2148.78

Engineer In Charge.

48 Providng and fixing Jet spray heavy duty with chrome finished Braided hose 60 cm long as per direction of engineer 28.00 No 845.25

49 Providing and fixing 2 in 1 bibtab for toilet including wall flange and other necessary accessory required. etc complete. as 38.00 No 2250.41

per direction of engineer incharge.

50 Providing and fixing waste coupling and waste pipe for wash basin of urnial as per instruction of engineer in charge. 23.00 No 831.26

51 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick 318.00 Smt 1674.15

Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross

‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of

mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting

on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of

size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with

24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and

as directed by engineerin- charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling

tiles shall have NRC.Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection

85% noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m

KC.for the best thermal Insulation

52 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 475.00 Smt 606.95

1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x

40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and

perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting leat, joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser

etc. comp. as per detail drawing as directed

53 Providing and placing swimming pool overflow grating of approved make, 200 mm to 300 mm wide (8" to 12"), of 25.00 Smt 1219.58

required size, shape, and profile, including necessary support system, frame/channel, fixing accessories, fasteners,

complete in all respects, as approved by the Engineer-in-Charge.

54 Providing and placing 6–8 mm thick floor mat of approved make, of required size and shape, including cutting to proper 135.00 Smt 1045.35

dimensions, positioning, and fixing wherever required, complete in all respects, as approved by the Engineer-in-Charge.

55 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming 2750.00 Kg 88.38

coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main

and cross beams or any type of structural steel member. Hip and jack rafters, purlins conneted to common rafters and the

56 Providing and fixing of 2.5 to 3 mm thick Alluminium Composite pannel over existing framing on wall or celing as per 244.00 Smt 903.61

approved colour/shade including all necessary fastners, fixtures and tools also including removal of old sheet and

replacing of structural member if required as directed by Engineer in charge including all lead and lift.

Item Rate In

Description of Item Quantity Unit Amount

No figures

57 Providing erecting and fixing double coated ISI water tank of required capacity No with all necessary fittings and 20000.00 Liter 3.95

connection etc. complete on terrace.

58 Wall painting two coats with plastic emulsion paint of of make Asian, Berger, Nerolac, Indigo and manufacture on new wall 3090.00 Smt 83.18

surface to give an even shade including two coats of Birla or Asian acrylic lapy ( putty) & one coats of primer of approved

brand including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered

smooth for all floors.

59 Painting two coats (and priming coat) on new steel and other metal surface with enamel paint, brushing interior to give an 500.00 Smt 128.62

even shade including cleaning the surface of all dirt, dust and other foreign matter.

60 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) and one coat of primer of make 2060.00 Smt 120.26

Asian, Berger, Nerolac, Indigo or equivalent to give an required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials.etc complete for all floors

61 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with 27.00 Smt 1525.00

colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for

Fix window.

62 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 183.00 Smt 706.90

pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

63 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm 122.00 Rmt 374.92

thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc complete.

64 Providing and fixing mirror with PVC Frame of required size including fastening required for fixing on the wall as per 20.00 Smt 1416.58

direction of engineer incharge.

65 Providing and Erecting heavy duty plastic lockers compartment having required numbers of lockers made up of high 18.00 Smt 24275.35

density polyethylene (HDPE) material of required size and colour with built in locks and minimum two sets of keys

including materials, labour, transportation, erection as directed by engineer in charge.

66 Providing and Erecting Metal cloth hanger having 4-5 hooks attached including accessories, labour, erection as directed by 30.00 No 609.79

engineer in charge.

67 Providing Stainless Steel Bench having length from 1.2-1.5 meter for sitting of required size including all cutting, welding, 20.00 No 14634.90

placing, labour, transportation etc. as directed by engineer in charge.

68 Providing and Fixing Window Roller Curtain Blinds including all accessories, tooles, labour, erection etc. as directed by 61.00 Smt 6533.44

engineer in charge.

69 Providing two seater Rexine sofa having seating height from 35-45 cm and sofa frame shall be made from high-quality 6.00 No 41349.40

hardwood or engineered wood also generously padded with high-density foam or other resilient materials with SS leg

including all accessories, tooles, labour,fixing etc. as directed by engineer in charge.

70 Providing, supplying and fixing PVC Swimming Pool Lane Divider of approved make made of UV stabilized PVC floats/discs 80.00 Rmt 830.47

of 100 mm to 125 mm dia. (as specified) threaded on rope, including end hooks, anchors, tensioning arrangements and all

necessary mounting accessories, complete with installation, alignment and fixing in position, including all materials,

labour, transportation, leads & lifts etc. complete as directed by Engineer-in-Charge.

71 Providing & fixing precast R.C.C. Frame with Cover MD 10 Ton (Rubber Mould Finish) inner Size 600 x 450mm with all 15.00 No 1719.02

Necessary Fittings.

72 Providing & fixing For Manhole Circular Precast R.C.C. Frame with Cover MD 10 Ton (Rubber Mould Finish) inner Size 600 15.00 No 1951.32

x 600mm with all Necessary Fittings.

73 Providing and fixing toughened glass with color or frost film on existing frame including all accessories, tooles, labour, 60.00 Smt 6488.26

erection etc. for all floor as directed by engineer in charge.

74 Providing and fixing jali at tennis court or at any other places as per requirement on existing frame including all 17.00 Smt 513.96

accessories, tooles, labour, erection etc. for all floor as directed by engineer in charge.

75 Repairing the existing MS frame by supplying and fixing PVC/rubber-coated welded wire mesh of 2.5 mm diameter with 78.00 Smt 1306.69

50 mm × 50 mm grid, including cutting to required size, straightening, aligning, placing, and securely fixing the mesh with

necessary welding/tying arrangements, making proper overlaps or edge anchoring as required, and finishing all complete

as directed by the Engineer-in-Charge. The rate includes cost of material, labour, tools & tackles, minor repairs to frame,

scaffolding, and all incidental charges.

76 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap 10.00 No 1356.81

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour

77 Providing and fixing Telephonic Black Colour Granite Shelves / Partitions 18mm thick embaded in to wall at support 17.00 Smt 2136.55

including racking and finishing smooth the surface including cutting the stone as and where required etc. complete

including rounding of exposed edges etc. complete.

Item Rate In

Description of Item Quantity Unit Amount

No figures

78 Providing and fixing aluminium partition made from extruded aluminium sections of approved make and size, including 20.00 Smt 3469.98

vertical and horizontal members, securely fixed in position with necessary fasteners, screws, and accessories. The partition

shall be provided with 6 mm thick clear float glass / 6 mm thick decorative laminated/bakelite sheet (of approved shade)

in the lower portion, fixed with rubber gaskets, neoprene packing, glazing clips, and beadings as required. The work

includes cutting, joining, leveling, aligning, sealing joints with silicone, and completing all accessories, hardware, labour,

tools & tackles, and incidentals as per drawing and as directed by the Engineer-in-Charge.

79 Providing and fixing glass film of approved make and approved colour tint on existing glass surfaces, including cleaning the 140.00 Smt 609.79

glass, cutting the film to required size, applying with recommended adhesive/soapy solution, removing air bubbles with

squeegee, trimming edges, finishing the surface smoothly and neatly, and completing all materials, labour, tools and

incidental charges as directed by the Engineer-in-Charge.

80 Repairing the existing door by removing damaged hinges, checking alignment, and refixing/replacing hinges and required 10.00 No 232.30

accessories such as screws, aldrops, stoppers, handles, tower bolts etc., including tightening, adjusting the shutter for

smooth operation, minor chiselling, drilling, applying oil/grease, and completing the work with all labour, tools and

incidental charges as directed by the Engineer-in-Charge.

81 Providing post-construction anti-termite treatment by drilling holes in existing flooring/wall junctions at 600 mm c/c 96.00 smt 98.73

spacing, injecting approved anti-termite chemical emulsion as per manufacturer’s recommended dosage to form an

effective barrier, sealing holes with white/grey cement mortar, and cleaning the area complete with all materials, labour,

tools, and making good as directed by the Engineer-in-Charge.

82 Provinding and fixing chicken wire mesh of gauge 0.18mm and 0.18mt. wide with necessary screws and nail at joints 9.00 Smt 64.70

cracks of brick work R.C.C work as per drawing and specification and direction of Engineer incharge.

83 Providing and carrying out groove filling and polishing of existing natural stone flooring, including cleaning the grooves, 218.00 Smt 499.45

removing loose material, filling the grooves with approved polymeric filler/epoxy-based compound, allowing proper

curing, followed by machine grinding, rubbing and polishing the entire surface to achieve an even, smooth and uniform

finish, including supply of materials, labour, tools, consumables and all incidental charges as directed by the Engineer-in-

84 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal 35.00 No 599.64

diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the

85 Providing and fixing metal false ceiling of approved make and pattern, including supplying and fixing metal tiles/panels, GI 270.00 Smt 1417.03

suspension system consisting of main channels, cross-channels, hangers, perimeter angles, anchor fasteners, clips and all

necessary accessories, complete as per manufacturer’s specification. The work includes dismantling and removing the

existing false ceiling up to 8.0 m height, lowering and stacking the serviceable materials, disposing the unserviceable

materials, making good any damages to the structure, and installing the new ceiling in true level and alignment. The rate

includes all materials, labour, tools, scaffolding up to 8 m height, and all incidental charges as directed by the Engineer-in-

86 Providing, supplying and fixing anti-bird spikes at required locations to prevent bird perching and nesting on parapets, 200.00 Rmt 464.60

chajjas, ledges, signages, beams, cornices, ducts, window AC projections, pipe lines, and all other exposed surfaces,

complete as directed by the Engineer-in-Charge.

Item Rate In

Description of Item Quantity Unit Amount

No figures

87 Providing and fixing Galvalume roofing sheets (0.45–0.50 mm TCT) of approved profile on the existing structural 240.00 Smt 734.65

framework, including alignment, laying, cutting, overlapping, fixing with self-drilling screws, EPDM washers, ridge pieces,

corner flashing and all necessary accessories. Work includes cleaning the existing structure, preparing the surface,

ensuring proper slope for drainage and completing the installation as per manufacturer’s specifications and engineer-in-

charge directions.

88 Providing and fixing toughened glass on existing frame including all accessories, tooles, labour, erection etc. for all floor as 116.00 Smt 3895.09

directed by engineer in charge.

89 Providing and filling cores/voids of pipes, sleeves or structural members of any diameter with cement–sand grout/micro- 60.00 No 851.77

concrete, including surface cleaning and preparation, mixing to required consistency, placing the grout/micro-concrete

using suitable tools, compacting, curing and completing the work with all materials, labour, tools and consumables as per

specifications and directions of the Engineer-in-Charge.

90 Removing loose concrete blocks and debris from terrace/roof surface, collecting and lifting the material, carting it away up 22.00 Cmt 2555.30

to the designated disposal location with all lead and lift, including loading, unloading, stacking or disposal as directed by

the Engineer-in-Charge. All labour, tools, equipment and incidental charges included.

91 Providing and carrying out patch painting with polyuretheme base coating to existing RCC/masonry surfaces including 120.00 Smt 232.30

cleaning the surface, removing loose paint, dust and weak material, filling cracks and minor undulations with approved

crack filler/putty or waterproofing compound, rubbing smooth, applying primer and required coats of matching paint to

blend with existing surface, and completing the work with all materials, labour, tools, scaffolding, leads & lifts etc. complete

as directed by Engineer-in-Charge.

92 Providing and laying 25 mm thick River Washed Rough Kota stone flooring (one edge chisel dressed / natural finish) over 89.00 Smt 728.94

a 20 mm thick base of C.M. 1:5 (1 cement : 5 coarse sand), including pointing with C.M. 1:2 (1 cement : 2 stone dust),

curing, finishing, and all complete as per specifications.

93 Providing cleaning and repair of mosaic flooring/wall art, including removal of stains, dirt, and efflorescence using 158.00 Smt 487.83

approved chemicals and mild acid, repair of damaged areas by filling voids with cement-sand grout, fixing missing mosaic

tile pieces to match existing pattern, pointing, curing, and finishing complete, including all labour, materials, tools, and

safety measures, excluding dismantling of base

94 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 240.00 Rmt 660.58

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [F] 50mm.

95 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation 180.00 Rmt 338.24

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [D] 32mm.

96 Providing and fixing Gun metal check or non-return fullway 16.00 No 420.63

wheel valve.(C) 25mm dia.

97 Providing and fixing Gun metal check or non-return fullway 10.00 No 314.73

wheel valve.(D) 32mm dia.

Total Rs.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The amount of dismentalled credit materials at Rs. 16293.00 shall be deducted from first R.A. bill.

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

5 S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at

the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Capital Project Sub Division: 17 Capital Project Division:

Gandhinagar Gandhinagar