Emergency / Essential / Restoration work Schedules under Dist. R&B Division, Morbi. (For Road Furniture work)

Name of work : Emergency / Essential / Restoration work Schedules under Dist. R&B Division, Morbi. (For Road Furnitur

Sr. No. Description of Item Unit Basic SOR

1 Painting two coat of lime and geru on trees on road side as directed including cost of labour and materials. No.

2 Repairs to GI pipe railing by providing necessary 40mm dia GI pipe including one coat primer two coat and oil painting as Rmt.

directed including cost of labour.

3 Repairs to steel angle railing by providing angle and repairs to angle fixing in CC 1:3:6 block of 30 x 30 x 0.45 cm size including Rmt.

one coat of primer two coat of oil painting including cost of laobur and material.

5 Painting and lettering with enamel paint 3- coats etc complete. (iii) Fifth K.M. Stone . No.

6 Painting and lettering with enamel paint 3- coats etc complete. (i) Ordinary K.M. Stone No.

7 Painting and lettering with enamel paint 3- coats etc complete. (iv) Hectometer stone. No.

8 Painting and lettering with enamel paint 3- coats etc complete. (vi) Village name board. No.

9 Painting and lettering with enamel paint 3- coats etc complete. (v) Road sign board. No.

10 Providing oil painting (two coats) to bridge inforamation board including lettering, numbring and painting black and white No.

strips to the posts as directed etc. complete including labour and materials.

11 Providing oil painting (three coats) to number plate or CD works including numbring, lettering, arrows etc. complete as each

directed including labour and materials.

12 Providing oil painting (two coats) to flood gauge work on pier / abutment of bridge up to 10 mt. height including numbring, Rmt.

lettering etc. complete as directed including cost of labour and materials.

13 Providing oil painting (two coats) black and white strips to guard stone / indicator stonre as directed etc. complete including No.

labour and materials.

14 Providing oil painting (two coats) black and white strips to kerbing of CD works as directed etc. complete including cost of Sqm.

labour and materials.

15 Providing oil painting (two coats) black and white strips on inner side of CD works parapet as directed etc. complete including Rmt.

16 Providing oil painting (two coats) black and white strips to GI pipe and post railing as directed etc. complete including cost of Rmt.

labour and materials.

Sr. No. Description of Item Unit Basic SOR

17 Painitng road center line strips up to 10cm width with road marking paint as directed etc. complete including cost of labour Rmt.

18 Providing oil painting (three coats) to Junction Board are 2.40 mt. x 1.20 mt. including numbring, lettering, painting black and No.

white strips on posts as directed etc. complete including cost of labour and materials.

19 Providing oil painting (three coats) to Junction Board are 1.20 mt. x 0.90 mt. including numbring, lettering, painting black and No.

white strips on posts as directed etc. complete including cost of labour and materials.

20 Providing oil painting (two coats) with red and white oil painting flood gauge on causeway and CD work incluiding necessary Rmt.

lettering, numbring as directed etc. complete including cost of labour and materials.

21 Providing reflective letters and retro reflective boad including cutting the letters of required size from reflective type and No.

stiking on existing board as directed etc. complete including cost of labour and materials.

22 Providing oil painting (three coats) black and white strips to angle and post railing as directed etc. complete including cost of Rmt.

labour and materials.

23 White washing (two coats) to existing guard stone, indiacator stone, boundary stone on road site as directed etc. complete No.

including cost of labour and materials.

24 White washing (two coats) to parapet of CD works as directed etc. complete including cost of labour and materials. Sqm.

25 Refixing of existing guard stone, indicator stone, boundary stone including taking out existing one from earth and refixing in No.

earth as directed etc. complete.

26 Refixing of existing ordinary Km. stone including taking out existing one and refixing the same in CC 1:2:4 foundation 0.90 x No.

0.90 x 0.30 mt. with necessary earth work etc. complete including cost of labour and materials.

27 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing Sqm.

and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms

per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white

color marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be

min 100 mcd/m2/lux during the service life during the day time. The marking should meet the performance criteria for night

time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015.Warranty for the Retro

reflectivity should be two years.

Sr. No. Description of Item Unit Basic SOR

28 Providing and fixing ordinary Kilometer stone of approved hard stone as per I.R.C. type design in C.C.1:4:8 including No.

painting and lettering etc. complete (ForN.H., S.H. and M.D.R.)

29 Providing and fixing Ordinary kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design No.

in C.C. 1:4:8 including painting lettering etc. complete (including cost of cement & Steel).

30 Providing and fixing Hectometer as per I.R.C. type design including painting, lettering etc. complete.(ii) Fixing in C.C. 1:5:10 No.

31 Supplying and fixing road sign board of MS Plates and angle iron including painting lettering etc. complete including fixing

in CC 1:4:8 with necessary excavation etc. complete as per IRC type design

(i) Non Reflective type No.

(ii) Reflective type No.

32 Providing and fixing village name boards as per standard IRC type design of steel plate including painting, lettering etc. No.

complete with fixing in C.C. 1:4:8 block with necessary excavation.

33 Providing and fixing Junction board of M.S. plates and angles as per standard I.R.C. design including fixing in C.C. 1:4:8 No.

with necessary excavation painting figuring and lettering on board etc. complete.

34 Informatory Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 80 x 60cms. rectangle as per the No.

design of IRC-67-1977 pre treated with phospheting process & acid teching; coated with one coat of epoxyprimer and two

coats of best qualityepoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long

stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; painted with best

qualityepoxy coatings in black and whitebends.the details of symbol for eachboard shall details of symbol for eachboard shall

be as per the instruction ofengineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x45 x 60cms. for each

leg. including excavation curing tec. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

35 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x 30cms. rectangle as as No.

per the design/drawing attached (IRC) pretreated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x 5mm

painted with best quality epoxy coatings The fixing at site shall be in 1:2:4 CC block of size 45x45x 60cms. for each leg.

including excavation curing etc. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

Sr. No. Description of Item Unit Basic SOR

37 Diversion sing board :-Providing & Fixing sign boards made out of 2mm aluminium sheet, size 180 x 60 cms. rectangle as per No.

the attached drawing pre treated with phospheting process & acid etching. coated with one coat of epoxy priemr and two coats

of best quality epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; Letters and

numerals should be as per IRC-30-1968,3.1m long (2nos) stand post and frame fabricated from iron angle of 35x35x3mm,

50x50x5mm painted with best quality epoxy coatings in blak and white bends. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45x 60cms for each leg, including excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

1017 Standard Delineator: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed No.

area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming

with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The

delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which retro reflective sheeting shall

be pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than

mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being

installed. height of sheeting should be minimum 150mm whereas width of sheeting should not be less than 75mm (should

be placed every alternative 15cm). The front and back faces of the delineator should be curved with a radius of not more than

200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator

for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets

vandal-proof. The delineator is meant for application on gaps in median, traffic islands, dangerous bends, roundabouts, narrow

bridges etc. or as desired by site engineer

39 Boundary Pillar (Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967, fixed in Each

position including finishing and lettering but excluding painting)

41 Road Markers / Road Stud with Lense Reflector (Providing and fixing of road stud 100 x 100 mm, die cast in aluminum, Each

resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling

hole 30mm upto a depth of 60mm and bedded in suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973)

42 Traffic Cone Traffic cones with 150 mm reflective sleeve (NH-M-186) Each

Sr. No. Description of Item Unit Basic SOR

43 Railway Crossing Sign No.

Railway crossing sign:Providing & Fixing sign boards made out of 2mm aluminium sheet, size 90x90x90cms.triangle plus 90 x

30cms additional plate as per the attached drawing (IRC) pre treated with phospheting process & acid etching. coated with

one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with retro sheeting as per latest

M.O.S.T.Specifications 3.1. long stand post and frame fabricated from iron angle of 35 x 35 x 3mm , 75 x 75 x 6mm as

required painted with best quality epoxy coatings in black and white bends. The fixing at site shall be in 1:2:4 CC block of size

45 x 45 x 60 cms for each leg. including excavation curing etc. complete the supervision of engineer in charge.(A) Engineer

44 Four / Two lane Ahead Sign No.

Providing and fixing sign boards made out of 2mm aluminum sheet size 120 x 120 cms. square plus 120 x 60 cms additional

plate as per the attached drawing. Pre treated with phospheting process and acid etching coated with one coat of epoxy primer

and two coats of best quality epoxy paint : refectorised with retro retro sheeting as per latest MOST specifications, Letters and

numerals should be as per IRC - 30 - 1968, 3.1m long (2 Nos) stand post and frame fabricated from iron angle of 50 x 75 x

75x 6 mm as required, painted with best quality epoxy coating in black and white bends. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 cms. for each leg. including excavation, curing etc. complete under the supervision of engineer

(A) Engineer Grade.

45 Gunniting to existing structure like C.D. / bridges with cm 1:3, 50 mm thickness with iron jail 3mm thick 100 x 100mm size Sqm.

checking jail including necessary machinery curing & cost of cement including chiseling around used portion and scraping

with wire brushes cleaning the surface with water and air compressor.

46 Gunniting to existing structure like C.D. / bridges with cm 1:3, 25 mm thickness with iron jail 3mm thick 100 x 100mm size Sqm.

checking jail including necessary machinery curing & cost of cement including chiseling around used portion and scraping

with wire brushes cleaning the surface with water and air compressor.

47 Cement Grouting C.M. 1:3 C.D. / bridges including materials machineries, tube presser with pump or labour etc. complete Bag

including cost of cement labour works and materials complete.

48 Metal Beam Crash Barrier Rmt.

Sr. No. Description of Item Unit Basic SOR

Type-A, “W” : Metal Beam Crash Barrier (Providing and erecting a “W” metal beam crash barrier comprising of 3 mm thick

corrugated sheet metal beam rail, 70 cm above road / ground level, fixed on ISMC series channel vertical post, 150 x 75 x

mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by

hot dip process, all fittings to conform to IS : 1367 and IS : 1364, metal beam rail to be fixed on the vertical post with a spacer

of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)

49 Metal Beam Crash Barrier Rmt.

Type-B, “Thrie” : Metal Beam Crash Barrier (Providing and erecting a “Thrie” metal beam crash barrier comprising of 3 mm

thick corrugated sheet metal beam rail, 85 cm above road / ground level, fixed on ISMC series channel vertical post, 150 x

x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanized by

hot dip process, all fittings to conform to IS : 1367 and IS : 1364, metal beam rail to be fixed on the vertical post with a spacer

of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810)

50 Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with No.

reflector made of MMC (prismatic type of size 12cm x 6cm x 2.5cm) provided with bituminous adhesive 100g. with each unit

for fixing. (High Intensity grade)

51 Providing and fixing of flood gauge post in C.C. 1:2:4 with M.S channel C type of size 125 x 65 mm with web thickness 5 No.

mm 2.00 mt long including cutting the channels, bending one edge for hold fast including painting with oil paint of approved

branded manufacture (three coat) with one coat of primer and marking numbering, lettering etc. by using radium strips at

causeway / dip on road site as directed.( SOR It.no.26201 A )

Sr. No. Description of Item Unit Basic SOR

52 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum No.

composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall

be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

53 Village name / Bump ahed sign board Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP No.

(Aluminum composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol or inscription/letters

/ numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

Sr. No. Description of Item Unit Basic SOR

54 Direction (Junction) Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum No.

composite Panel); size 244x122 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x

5mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

55 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum No.

composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Sr. No. Description of Item Unit Basic SOR

56 Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum No.

composite Panel); size 150x90 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.

including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

57 Tree Guard sign :-Providing & fixing sign board made out of 2mm aluminium sheet / 3mm ACP (Aluminum composite Panel) No.

, size 30cms diameter circle, pretreated with phospheting process and acid etching, painted with one coat of epoxy primer and

two coats of best quality epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T. specifications. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

58 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum No.

composite Panel); size 90x30 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x 35 x 3mm;

painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Sr. No. Description of Item Unit Basic SOR

59 Distance Informatory / Destination Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP No.

(Aluminum composite Panel); size 180x120 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting

process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr

long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron

angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol foreach

board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

60 Four (Two) Lane Ahead Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum No.

composite Panel); size 120x120 cms. square plus 120x60 cm additional plate as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4 mtr long stand post (2 Nos.) of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends.

The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting

Sr. No. Description of Item Unit Basic SOR

Regulatory/Mandatory signs : Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 60 cms Dia Circle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with

61 bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per theinstruction of No.

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Parking Signs :- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size size 60 x 60cms. square plus 60 x 20cms rectangular additional plate as as per the design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

62 from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details No.

of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

I / We am / are willing to carryout the rate at ________ % Above/below (in figures) ______________________ percent (in words) the estimated rates mentioned above

Executive Engineer