Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹1.3 LAccepted-AOC | l1 | Accepted-AOC l1 | |
| 2 | l2₹1.3 L+₹26 (0.02%)Rejected-AOC | l2 | Rejected-AOC l2 |
| Sl No | Description | Qty | Unit | ABDUL SALAM L2 | SUNNY C J L1 |
|---|---|---|---|---|---|
| 1.00IMPROVEWMENT WORK | |||||
| 1.00 | 15.9.1:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In Lime Mortar | 1.05 | cum | 1,197.33 ₹1,257.2 | 1,197 ₹1,256.85 Lowest |
| 1.00 | 15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar | 0.17 | cum | 728.74 ₹127.53 | 728 ₹127.4 Lowest |
| 1.00 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 57.2 | sqm | 35.29 ₹2,018.59 | 35 ₹2,002 Lowest |
| 1.00 | OD304800/2025-2026:Providing and laying 60mm thick factory made cement concrete interlocking M-30 grade paver block making machine with strong vibratory compaction of approved size and design shape laid in required colour and vpatten over 50mm thick compacted bed course of 6mm aggregates and filling the joints etc complete as per direction of engineer. | 57.2 | sqm | 1,157.42 ₹66,204.42 | 1,157.4 ₹66,203.28 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.97 | cum | 7,932.89 ₹7,686.97 | 7,932.8 ₹7,686.88 Lowest |
| 1.01 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 0.57 | cum | 7,713.54 ₹4,373.58 | 7,713.5 ₹4,373.55 Lowest |
| 1.01 | 50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete | 0.91 | cum | 7,702.15 ₹7,024.36 | 7,702.1 ₹7,024.32 Lowest |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 19.21 | sqm | 369.76 ₹7,104.94 | 369.7 ₹7,103.79 Lowest |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 25.54 | kg | 178.42 ₹4,557.03 | 178.4 ₹4,556.51 Lowest |
Tender Value
₹1.3 L
EMD Value
₹3,308
Closing Date
22 Oct 2025, 5:00 pmClosed
ASSISTANT ENGINEER
OFFICE OF THE ASSISTANT ENGINEER, LID EW SECTION, ERUMELY GRAMA PANCHAYAT
Annual Plan-Erumeli Gp 2025-26 Pr 115 Improvements to Kitchen Renovation and interlocking at nedumkavuvayal welfare LP S Ward 23 -pr 115-General Civil Work
2025_LSGD_808656_13
ET/04/AE/LIDEW/EGP 25-26
Open Tender
Civil Works - Buildings
Item Rate
ERUMELI
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,308
Yes
8 Mar 2026
13 Oct 2025
24 Oct 2025
13 Oct 2025
22 Oct 2025
13 Oct 2025
Amount
IMPROVEWMENT WORK
15.9.1:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In Lime Mortar
15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar
2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
OD304800/2025-2026:Providing and laying 60mm thick factory made cement concrete interlocking M-30 grade paver block making machine with strong vibratory compaction of approved size and design shape laid in required colour and vpatten over 50mm thick compacted bed course of 6mm aggregates and filling the joints etc complete as per direction of engineer.
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
50.6.3.1:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth for 10 cm thick wall in CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)
21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).
ABDUL SALAM (BID ID -2401432)
Bidder Name
ABDUL SALAM
SUNNY C J
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
sbd115.pdf
Tender Documents • 1.76 MB
BOQ_1348732.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .