CONSTRUCTION OF COMMUNITY HALL AT KATHODRA R.S.NO.48(BLOCK NO.-49) IN NEW EAST (SARTHANA)ZONE,SURAT

NAME OF WORK : CONSTRUCTION OF COMMUNITY HALL AT MOJE KATHODARA, R.S.No. 48 (BLOCK-49) IN NEW EAST

(SARTHANA) ZONE , SURAT.

DESCRIPTION Qty. UNIT AMOUNT

WORK UP TO PLINTH LEVEL

Excavation for foundation including sorting out and stacking off

useful materials and disposing of the excavated stuff up to 50 mt.

1 lead and all lift, watering etc.comp. (A) loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 1455.00 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

2 disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

SMC SOR , ITEM NO. 94, PG. NO.

Providing & Filling Rubbles including hand packing & filling

interstics with Quarry Spalls complete for all leads and lifts.

SMC SOR , ITEM NO. 22, PG. NO. 3 154.00 C.M. 1094.11

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand : 6 Crushed

4 stone agg 20m.m Nominal size) &curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 88.00 C.M. 3095.25

(C) Grade Slab 4.00 C.M. 3095.25

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ. cost

5 of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

(C) Grade slab 132.00 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 234.00 C.M. 4332.5

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 Design mix concrete as per IS 456:2000 (latest

7 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12930.68 -

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 33.00 C.M. 9288.03

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57 -

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 76.00 C.M. 7067.84

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness. 0.00 C.M. 7965.38 -

(2) Slabs having more than 10 Cm & upto 13 Cm

(3) Slabs having more than 13 Cm thickness. 9.00 C.M. 6793.97

(SOR SMC - MIX DESIGN PG. NO-14)

(E) RCC Wall - 200 mm Thick 28.00 C.M. 8336.43

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M35 Design mix concrete as per IS 456:2000 (latest

8 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 13194.99 -

DESCRIPTION Qty. UNIT AMOUNT

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 24.00 C.M. 9552.35

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

9 R.C.C. work incl. bending, binding & placing in position etc.comp.---

Upto G.L./P.L. 55860.00 Kg. 77.29

(SOR SMC Pg No. 1 It No. 8)

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 314.00 C.M. 4441.11

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 2293.00 C.M. 136.92

Filling in foundation and plinth with murrum or selected soil in

12 layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 934.00 C.M. 301.78

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

13 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Upto G.L./P.L. 133.00 S.M 249.39

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

14 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Upto G.L./P.L. 53.00 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

15 proforma duly stamped (2) The rate shall include for work at all 255.00 S.M 505.00

floors & conducting water proof test as directed. (M.R.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions. (b)

II corse of 20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course of applying

blown or / resideal bitumen applied hot at 1.7 kg per sqm of area.

(d) IV course of 400mm micron th. PVC sheet. (Overlaps at joints of

PVC sheet should be 200mm wide and pasted to each other with

bitumen about 1.7 kg./ sqm.)

(SOR SMC Pg No. 6 It No. 63)

carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as per

16 6131_part II concentration weight one litter give 1% concentration 861.00 S.M. 87.03

inclusive of one litter chemicals emulsions application at the rate of

5 litter chemicals /sqmt of surface is recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

17 in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

(SOR SMC Pg No. 3 It No. 27) 193.00 S.M 286.10

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi,algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

18 by water jetting if required. Fill up all minor cracks and defects 193.00 S.M 82.00

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No.

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing,

19 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68 -

First Floor 0.00 C.M. 12971.23 -

Terrace Floor 0.00 C.M. 13011.78 -

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11253.32 -

First Floor 0.00 C.M. 11293.87 -

Terrace Floor 0.00 C.M. 11334.42 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 54.00 C.M. 9288.03

First Floor 54.00 C.M. 9328.58

Terrace Floor 20.00 C.M. 9369.13

Above SC Floor 2.00 C.M. 9409.68

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9083.57 -

First Floor 0.00 C.M. 9164.67 -

Terrace Floor 0.00 C.M. 9205.22 -

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8155.37 -

First Floor 0.00 C.M. 8195.92 -

Terrace Floor 0.00 C.M. 8236.47 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 82.00 C.M. 7067.84

First Floor 52.00 C.M. 7108.39

Terrace Floor 12.00 C.M. 7148.94

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7965.38 -

First Floor 0.00 C.M. 8005.93 -

Terrace Floor 0.00 C.M. 8046.48 -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7377.92 -

First Floor 0.00 C.M. 7418.47 -

Terrace Floor 0.00 C.M. 7459.02 -

(3) Having more than 13 cm. Thickness

Ground Floor 130.00 C.M. 6793.97

First Floor 83.00 C.M. 6834.52

Terrace Floor 11.00 C.M. 6875.07

(SOR SMC - MIX DESIGN PG. NO-14)

DESCRIPTION Qty. UNIT AMOUNT

Ground Floor 5.00 C.M. 9963.97

First Floor 4.00 C.M. 10004.52

Terrace Floor 0.40 C.M. 10045.07

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 10.00 C.M. 7119.46

First Floor 10.00 C.M. 7160.01

Terrace Floor 0.60 C.M. 7200.56

(SOR SMC - MIX DESIGN PG. NO-14)

Providing, mixing, placing, compacting by machine vibrator, curing,

20 testing M35 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 13194.99 -

First Floor 0.00 C.M. 13235.54 -

Terrace Floor 0.00 C.M. 13276.09 -

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11517.64 -

First Floor 0.00 C.M. 11558.19 -

Terrace Floor 0.00 C.M. 11598.74 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 39.00 C.M. 9552.35

First Floor 39.00 C.M. 9592.90

Terrace Floor 8.00 C.M. 9633.45

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9347.88 -

First Floor 0.00 C.M. 9388.43 -

Terrace Floor 0.00 C.M. 9428.98 -

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8419.68 -

First Floor 0.00 C.M. 8460.23 -

Terrace Floor 0.00 C.M. 8500.78 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 7332.16 -

First Floor 51.00 C.M. 7372.71

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 8229.69 -

First Floor 0.00 C.M. 8270.24 -

Terrace Floor 0.00 C.M. 8310.79 -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7642.24 -

First Floor 0.00 C.M. 7682.79 -

Terrace Floor 0.00 C.M. 7723.34 -

(3) Having more than 13 cm. Thickness

Ground Floor 0.00 C.M. 7058.28 -

First Floor 67.00 C.M. 7098.83

Terrace Floor 0.00 C.M. 7139.38 -

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.00 C.M. 10227.64 -

First Floor 0.00 C.M. 10268.19 -

Terrace Floor 0.00 C.M. 10308.74 -

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.00 C.M. 7383.78 -

First Floor 0.00 C.M. 7424.33 -

Terrace Floor 0.00 C.M. 7464.88 -

(SOR SMC - MIX DESIGN PG. NO-14)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed

21 stone agg. 20 m.m Nominal size)& curing comp. incl. cost of from

work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 13.00 C.M. 4085.83

Providing, mixing, placing, compacting by machine vibrator, curing,

22 testing M25 Design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

DESCRIPTION Qty. UNIT AMOUNT

(A) Stair cases including landing etc.

Ground Floor 11.00 C.M. 7765.80

First Floor 11.00 C.M. 7806.35

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21 -

First Floor 0.00 C.M. 9523.76 -

Terrace Floor 0.00 C.M. 9564.31 -

(SOR SMC - MIX DESIGN PG. NO-14)

(C) RCC Wall - 200 mm thick

Ground Floor 13.00 C.M. 8336.43

First Floor 13.00 C.M. 8376.98

Terrace Floor 10.00 C.M. 8417.53

(SOR SMC - MIX DESIGN PG. NO-14)

23 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 55850.00 Kg 77.29

First Floor 63210.00 Kg 78.34

Terrace Floor 12838.00 Kg 79.39

Stair Cabin Top 770.00 Kg 80.44

(SOR SMC Pg No. 2 It No. 15)

Designing, providing and executing Bonded/ Unbonded Post-

tensioning works for slabs/beams/drop panels, etc. Including

decoiling the strands, cutting to the required lengths, supplying and

laying of sheathing (GI corrugated ducts), jointing with couplers

and inserting the strands, profiling, fixing live anchorages suitable

for tendons, grout vents, making dead end anchorages including

lowering the strands, fixing tendon support bars, supervising the

fixing of anti-bursting reinforcement, stressing the cables, end

trimming, grouting the cables with cement and admixtures, with

required plants and machinery tools and tackles, consumables etc.

including co-ordinating with Architectural/Structural consultants

drawings and obtaining approval from client/consultant/Project

Manager for the work done as per the requirement of

Architect/Structural Consultant at site. Also include Area marking

for Post tensioned elements. Area for the same shall be measured

within peripheral RCC beams/walls (Walls/beams not included)

or boundary of the slab etc. including all requisite as per Structural

Engineer instructions.Including all PT memberes (slab & beam)

stagging, shuttering and reproping shall be carried out as per

structural engineer's instruction and suggestion.

(1) All Post Tensioned Beams Detail Shall Only Be Provided After

Finalization Of Pt Vender By Contractor. (2) Rates Of PT beams

Includes All Ancillary Work/Facility/Item To Be Carried Out By

Contractor For Successful Execution Of PT Work. (3) All Required

Reproping For Long Span Beams/Slabs Or Other Critical Elements

Shall Be Carried Out By Contractor Without Any Extra Charge. (4)

Contractor Has To Kept Props For Rcc Elements As Per The 3504.00 RMT 180.00

Instruction And Detail From Structural Consultant In Addition To

Standard Norms As Per Is : 456:2006 Without Any Extra Cost. (5)

Contractor Has To Make All Required And Necessary Provision To

Support Cantilever Slab/Beams Projections And Elements Which

Required Stagging/Shuttering/Formwork Supporting Height More

Than Normal Height Like Additional; Brackets , Ms Beams Etc.

Without Extra Cost

Brick work using common burnt clay building bricks having

25 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 285.00 C.M. 4729.83

First Floor 367.00 C.M. 5018.55

Terrace Floor 79.00 C.M. 5307.27

Stair Cabin Top 16.00 C.M. 5595.99

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash

Ground Floor 255.00 S.M. 712.81

First Floor 304.00 S.M. 719.37

Terrace Floor 0.00 S.M. 725.94 -

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

27 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

DESCRIPTION Qty. UNIT AMOUNT

(A) for wall and similar surfaces

Ground Floor 2687.00 S.M 249.39

First Floor 3735.00 S.M 277.53

Terrace Floor 198.00 S.M 305.67

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

28 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 1029.00 S.M 225.34

First Floor 1077.00 S.M 254.89

Terrace Floor 92.00 S.M 284.45

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC) at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Ground floor 187.00 S.M. 102.00

First floor 244.00 S.M. 102.00

Terrace Floor 18.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Ground Floor 845.00 S.M 286.10

First Floor 847.00 S.M 286.10

Terrace Floor 520.00 S.M 286.10

Above SC Floor 34.00 S.M 286.10

(SOR SMC Pg No. 3 It No. 27)

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

31 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

Ground Floor 0.00 S.M 324.00 -

First Floor 0.00 S.M 324.00 -

Terrace Floor 0.00 S.M 324.00 -

LMR Floor 0.00 S.M 324.00 -

(SOR SMC Pg No. 3 It No. 28) MR

Providing throating or plaster drip and moulding it to R.C.C. chajja

etc.comp.. For all floor

Ground Floor 127.00 R.M 43.74

First Floor 127.00 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Ground Floor 128.00 R.M 50.00

First Floor 128.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

Ground Floor 19.00 S.M 1092.37

First Floor 38.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with white cement slurry.

Ground Floor 388.00 S.M 1135.80

First Floor 313.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm (Average)

base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new

36 surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement

slurry including finished with flush pointing & cleaning the surface

etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 55.00 S.M 1397.83

First Floor 60.00 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

37 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Ground Floor 735.00 S.M 1019.39

First Floor 1212.00 S.M 1019.39

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 51.00 S.M 1130.79

First Floor 22.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors. (Basic

rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 39.00 R.M. 3128.00

First Floor 4.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps etc.with

40 cinder or fly ash as directed by Engineer in charge etc. comp.For all

All Floor 45.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak wood

41 frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality & two

coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 87.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to filed up with

injected polyurethane foam done in situ along with embedded

42 wooden pieces for stiffening & also taking hinges & fintures. The 48.00 S.M 2019.98

whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S. hinges with fastener sleeve & alluminium fixtures &

fasteningsFor all Floors.

(SMC SOR,Pg No.5, It No. 55)

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 43.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

44 kg/mt) with sliding shutters of horizontal member size 40 mm x18 0.00 S.M 1705.67 -

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.For all Floors.

(A) Same as above but colour anodized 77.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded aluminium

POWEDER COATED section frame main outer size 95 mm x 24 mm

x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm

(of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of

size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @

45 Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 0.00 S.M 1591.87 -

mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant glass

fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 26.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded ofalluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

46 Powder Coated alluminium frame for ventilation with 5 mm thick 0.00 S.M 2414.00 -

frosted glass as details etc complete for Ventilation

A) Same as above but Colour anodized 11.00 S.M 1175.56

SMC SOR Alluminium Work ITEM NO.4A,Pg No.17 MR

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1 Cement:

4 Coarse sand) with necessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all Floors.

For all Floors. 181.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

48 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 1777.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames

of windows etc. At all floor levels with M.S. flats at required spacing

& frame around square or round bars with round headed bolts &

49 round headed bolts and nuts or by screws incl. Priming coat of Red

lead paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 5295.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other

foreign matters. (A) For plain grill For all Floor

For all Floors 268.00 S.M 68.57

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR, colour works,item no.-8,Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

51 stainless steel dash fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment

purpose only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 263.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following

operations. (a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm size

with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along

the vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl.

curing etc. Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All

above operations to be down in order and as directed and specified

by the engineer-in-charge. With average thickness of 120 mm and

minimum thickness at khurra as 65 mm. (Cement consumption

0.511 Bags / S.M.)

Terrace and staircabin top 964.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the

like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with

water proofing compound conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of

the depression & about 18mm th' On the side walls of the

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a height

of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement

consumption 0.316 Bags / S.M.)

For all Floors 246.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glased tiles of to be laid

over cementr morter 1:3 to plain or slope and to be tempered to

53 bring morter crème out up to surface using white cement including

grounding off jnctions and extending them up to 15 cm along the

wall, clearing with water and oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 964.00 S.M 779.70

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

54 including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 6757.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 2255.00 S.M 40.59

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

55 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces

For all Floors 6757.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 2255.00 S.M 83.36

SMC SOR , coiour works,Pg No.15,item no.-5

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

56 from all loose dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours. Application of putty is not

recommended. Minimum 4-6 hours duration is required between

each coat of weather shield max paint.For all Floors.

For all Floors 2246.00 S.M 82.00

SMC SOR, coiour works,Pg No.16,item no.-17

Providing and applying textured plaster as per design of ICI Dulux

or of Asian paint as per manufacturers specification and directions

in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

58 flush pointing in white or colour cement including rubbing and

polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 112.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of

steps,dedo and pillars laid on 10mm thick cement mortar 1:4 (1

59 Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic Rate:-

SMC SOR PAGE NO 4,IT NO 40 M.R. 22.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar

bent to shpe with hooked ends to RCC slabs curing, layig including

painting the exposed portion of loops, all as per standard design

For all Floors. 70.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

61 (A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams,hip & trussed

purlins connected to common raffers & the like. For all Floor

For all Floors. 16.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

DESCRIPTION Qty. UNIT AMOUNT

Providing & Fixing Polycarbonate sheet roofing with surface of

the sheet is coated with an anti-UV Co-extrusion layer having good

weather resistance, it can maintain its optical properties and

mechanical performance for a long time. Fasting is usually done by

screws. , The fastening screws should beinserted about 500 mm

apart and 300mm apart Along the supporting internal purlin and

62 edge pulin.All fixing holes with diameter at least 2 mm larger than

screw must be predrilled into each screw location. The screws

should be 6mm diameter with length according to sheet thickness

and corrosion resistant, with at least heavy duty hot dripped

galvanized or stainless steel. Excluding the cost of purlins rafter

(b) 2 mm thick Solid Sheet 9.00 S.M 1510.00

Extra for additional height of proping and centering where the

height of proping and centering exceed 4.0M between supprting

floor to ceilng including temporary brick or stone pillars for

suporting as required

1) height more than 4.0M and upto 5.0M 442.00 S.M 390.34

2) height more than 5.0M and upto 6.0M 442.00 S.M 688.83

R&B SOR, Pg No.75 ,Item no.-09002AA/09002BA

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron diagonals

x5mm size with top & bottom rails of T-iron 40x40x6mm. with

38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint etc.

Ground Floor 52.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

Masonary work using AAC Block Aerated light weight concrete

block having crushing strength not less than 35 kg/sqcm for super

65 structure above plinth level upto floor two level in cement

mortar 1:5 ( 1 cement : 5fine sand ) complete as per Technical

Ground Floor ( 1ST SLAB ) 49.00 C.M 4854.12

(LIBRARY & RECREATION CENTER AT P.T.P.S. NO.

(KATARGAM), F.P.NO 133, IT:31 SCDUAL B )

Providing & fixing at all floor levels,both face polished machine

cut edge Marble slab for Shelve joined with grey/White cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic

Cost Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 19.00 S.M 1050.00

Providing, fixing, fitting S.S. Latter of quality SS 304 or with

colour powder coating incliuding Necessary fixture & Fastaning

with scaffolding etc. complete. As per requirement & Direction of

Engineer in Charge.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

Providing, Approving designing and supplying 6mm thick white

Acrylic computer Laser cutting Latter including necessary

scaffolding, pasting on ACP sheet or similar surfaces, etc. complete.

RATE as Per EZ_B bord and S.S logo Samati for TPS NO.22 , F.P.

NO.76 (SARTHANA) incd GTS ITEM

69 Wall Vinyl Sticker 44.00 SqFt. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 147 (MR)

71 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 44.00 SqFt. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

72 5mm PVC sheet Eco Vinyl (Any size) 44.00 SqFt. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all waterproof

SMC SOR, PAGE NO.13,IT NO 150 (MR)

WATER SUPPLY & SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at

all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S"

74 trap for water closet squatting pan joining the trap with the pan &

soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

For all Floors. 2.00 Nos. 3275.00

DESCRIPTION Qty. UNIT AMOUNT

SMC sor- Sanitary Items, Page no22, It No.

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

75 ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278, HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

For all Floors. 21.00 3.65 3282.00

SMC sor- Sanitary Items,Page no21,It No.

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587

,HindWare F160109

For all Floors. 21.00 Nos 1009.90

SMC sor- Sanitary Items, Page no22, It No.

Providing Metropole Flush Valve Dual Flow 40mm

77 Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

For all Floors.

SMC sor- Sanitary Items, Page no22, It No.

Providing & fixing Wash Hung basin with single hole for pillar tap

Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004

For all Floors. 29.00 Nos 3276.63

SMC sor- Sanitary Items, Page no21, It No.7

Providing & fixing 600 mm.x 450 mm. mirror of superior glass

at all floor levels, mounted on 6 mm. th. A.C. sheet or plywood

sheet & fixed to wooden plugs with C.P.brass screws and washers

etc. For all Floor

All Floor 11.00 Nos 859.41

SMC sor Page no7 , It No.72

Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare

Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 29.00 Nos 1457.97

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 29.00 NO 1323.00

SMC sor Sanitary Items,Page no21, It No.

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

SMC sor Sanitary Items,Page no21, It No.

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

All floor 21.00 NO 2056.47

SMC sor Sanitary Items,Page no21, It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and

84 brass flange complete, including cutting and making good the wall

where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

For all Floors. 29.00 Nos 1564.36

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

DESCRIPTION Qty. UNIT AMOUNT

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN

1121N ,HindWare F880007

For all Floors. 11.00 Nos 924.24

SMC sor Sanitary Items,Page no21,It No.

Providing & Fixing stainless steel recessed type Soap dish of

86 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 11.00 Nos 839.91

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

87 cleaning design with C.I. scread down or hinged grating including

the cost of cutting and making good the walls.

All floor 15.00 586.27

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make

88 for soil and waste discharge system at all floor levels incl. All

fixtures like bends, tees,shoe etc. jointed with resin of approved

brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex make for rain

89 water at all floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc. comp. (M.R.) (A)

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of prince,

suprime, jain Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1

91 cement :3 coarse sand]) finishing as per instruction given by Eng.

75mm PVC pipe 140.00 R.M 173.00

SMC sor- Page no.8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe

(SCH-40) line of prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by angineer-in-

charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

93 wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

SMC sor Page no8 It No. 87 MR

DESCRIPTION Qty. UNIT AMOUNT

Providing and fixing M.S. holder bat clamps at all floor level,of

94 approved design to C.I. or S.C.I pipes including cost of cutting holes

and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

Providing and fixing G.I. holder "Z" clamps at all floor level,of

95 approved pipes including cost of cutting holes and making good the

wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00 -

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way wheel

valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe in

cement mortar in proportion 1:1 of following nominal internal

diameters including testing of pipes and joints etc. complete.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of 300mm

X 300mm size (inside) including plastering smooth inside and

outside 15 mm thick in C.M 1:3 etc. comp.i) square mouth traps

(A)300 MM X 300 MM Size - P type.For all Floors.

SMC sor,Page no 7, It No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top

100 slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 No. 3166.77 -

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single

pipe.'.(A) Precast RCC heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 233.85 -

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

101 cement: 2 Sand : 4 Grade stone aggregate 20mm size), Foundation 0.00 No. 2932.93 -

concrete 1: 5: 10 & fixing C.I. cover with frame to be not less than

38 kg. On top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39 -

SMC sor - Page no7,It No.76

DESCRIPTION Qty. UNIT AMOUNT

Providing and constructing Grease Chamber (Grease Trap) of

internal size 600 mm × 450 mm × 600 mm deep, including

excavation in all types of soil, foundation preparation, and 100 mm

thick RCC base slab (1:2:4 Mix), 230 mm thick brick masonry

walls in cement mortar (1:5) with internal partition wall, 12 mm

thick internal plaster in CM (1:3) finished smooth, internal surface

treatment with two coats of polyurethane liquid waterproofing

coating (Sika/Fosroc/Sunanda or approved equivalent) over

primer with geotextile reinforcement at corners and joints, external

surface coated with two coats of bituminous paint over primer as

102 per IS standards, Foundation concrete 1: 5: 10 & fixing C.I. cover

with frame to be not less than 38 kg. On top painted with zinc

chromate primer and enamel paint, including provision of SS

perforated removable basket, 75 mm dia PVC (SWR) inlet and

outlet pipes with necessary fittings, and finishing all works

complete in all respects including curing, testing for

watertightness, and disposal of surplus earth as per specification

and direction of Engineer-in-Charge.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size

having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 10.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm

SMC sor- Page no6 It No. 64 10.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

105 spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-

WHT 13261H ,HindWare BACK SMALL

SMC sor- Sanitary Items,Page no.21, It No.8

Providing & fixing at all floor levels,both face polished machine cut

edge Marble slab for urinal partition joined with grey/White

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)(

Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 16.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top,

bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C

1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside

107 R.C.C. pardi as per design, 10mm.th. water proofing cement plaster

in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner

face & bottom of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as necessary &

C.I. Cover 0.60 x .045 weight not less then 35kg. etc. com. as per

structural drawing excluding Steel & as directed by Engineer-in-

Under Ground water Tank 10000.00 Lit 6.87

SMC sor - Page no6. It No.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels, in flooring,

108 treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3

(1cement : 3 sand) finished with flush pointing in white cement

etc.com. For all floors

Under Ground water Tank 61.00 SM 900.29

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell make at all floor levels in skirting

risers of steps & dado on 10 mm. th. C.M.1:3 (1cement :3 sand)

including necessary cement paste for fixing and joined with white

cement slurry etc.complete. For all floors

Under Ground water Tank 114.00 SM 932.02

SMC SOR, Page no4, It No.

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing IS Mark TMT FE 500D reinforcement for R.C.C.

110 work incl. bending, binding & placing in position etc. comp. Upto

Upto G.L./P.L. 1180.00 Kg. 77.29

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

ELECTRIFICATION WORK OF BUILDING

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

112 / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below type of pipe to

be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal /

PVC / wooden box covered covered with appropriate front plate

113 modules erected on / in wall / ceiling for open / concealed wiring. 54 Pt. 151.50

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed.as per pipe erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and accessories with earth

114 continuity of following type erected on PVC / Metallic/Wooden box, 17 Pt. 674.68

single mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

115 front plate modules erected on / in wall / ceiling as per pipe 0 Pt. 510.05 -

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate

116 front plate modules erected on / in wall / ceiling as per pipe 35 Pt. 745.38

erected with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

DESCRIPTION Qty. UNIT AMOUNT

Point wiring for Individual Plug with & earth wire both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire

with 2.5 sq.mm ( green) earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

118 single mounting base frame covered with textured / metallic/white 35 Pt. 257.55

front plate modules erected on / in wall / ceiling with following

type accessories, Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type switches and following

type of accessories erected on PVC / Metallic/Wooden box, single

119 mounting base frame covered with textured / metallic/white front 5 Pt. 603.98

plate modules erected on / in wall / ceiling as per pipe erected.

with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete, Cat. III

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed

by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang, Cat. III 0 Ea. 160.59 -

120 [B] For Two Gang, Cat. III 0 Ea. 210.08 -

(4) TV Co-axial Socket outlet, Cat. III 0 Ea. 320.17 -

(7) Blank Plate Single, Cat. III 15 Ea. 25.25

(8) Computer RJ-45 socket, Cat. III 0 Ea. 160.59 -

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete, Cat. III

(19) Modular Indicating Call Bell, Cat.III 0 Ea. 329.26 -

(20) Modular Buzzer, Cat.III 0 Ea. 149.48 -

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

with necessary PVC fittings & Junction boxes fixed with adhesive

121 solution & Clamps with following dia of pipes, in approved manner

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc. complete of

122 following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

123 accessories of PVC/Resin polypropylene not below 1.8 mm thick

duly sealed in joint & erected on wall / ceiling of following size .

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 1200 Mtr. 62.62

(b) 2 wire 2.5 sq. mm 1000 Mtr. 82.82

DESCRIPTION Qty. UNIT AMOUNT

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

125 colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 0 Mtr. 112.11 -

(d) 3 wire 4 sq. mm 0 Mtr. 142.41 -

(g) 4 wire 4 sq. mm 30 Mtr. 180.79

Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper

insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two pairs,

& wrapped with FRLS PVC tape & sheathed with FRLS PVC or

HFFR outer Jacket suitable for telephone wiring & confirming to C-

DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.

[A] Conductor Size 0.5 mm

(2) Two Pairs 0 Mtr. 20.20 -

(b) Armoured [Jelly Filled] -

(1) Ten Pairs 0 Mtr. 125.24 -

(2) Twenty Pairs 0 Mtr. 199.98 -

(3) Fifty Pairs 0 Mtr. 467.63 -

Providing & erecting main Distribution (MDF) indoor type, back

mounted frame as per DoT standard approved with krone strips

(a) Suitable for 10 pair 0 Ea. 994.85 -

(b) Suitable for 20 pair 0 Ea. 1368.55 -

(c) Suitable for 50 pair 0 Ea. 1730.00 -

Supplying & erecting M.S. Box having 16 Gauge painted with red

oxide or Heavy duty PVC box erected flushed on wall or concealed

in wall with necessary plastering & finishing as directed of

following size.

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board erected on

PVC / Metal/Wooden board concealed/open with 3 mm thick PC

(Polycarbonate) / Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 1 Ea. 1133.22

Decorative call bell Ting-tong box type 250 volts complete

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL -

DESCRIPTION Qty. UNIT AMOUNT

MCCB 125 Amp , MICRO. BASED LSGD RELEASE MCB , 4 POLE,

MFM METER , R Y B INDICATOR, ON OFF INDICATIOR

40 AMP., FP MCB-B CURVE, 10 KA, WITH ON OFF INDICATOR :

40 AMP., FP MCCB, 25 KA, FOR FIRE PUMP - WITH ON OFF

INDICATOR : 1 No.

32 AMP., FP MCB-C CURVE, 10 KA, FOR DRINKING WATER PUMP

WITH ON OFF INDICATOR : 1 No.

32 AMP., FP MCB-CURVE, 10 KA,WITH ON OFF INDICATOR

(SPARE) : 1 No.

63 AMP., FP MCB-B CURVE, 10 KA (SPARE) WITH ON OFF

INDICATOR : 1 No.

40 AMP., FP MCB-B CURVE, 10 KA, (SPARE) WITH ON OFF

INDICATOR : 1 No.

16 AMP. FP MCB-B CURVE, 10 KA, (SPARE) WITH ON OFF

INDICATOR : 1 No.

16 AMP. ., DP, MCB-B CURVE, 10kA, (SPARE) WITH ON OFF

INDICATOR : 1 No.

16 AMP., DP, MCB-C CURVE, 10kA, (SPARE) WITH ON OFF

INDICATOR : 1 No.

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with -

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary

(B) Suitable for 200 Amp. Capacity 2 Ea. 1037.27

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)

(b) sheet steel double door

(iii)8 way (As Main GFLDB, FFLDB, SFLDB, TFLDB) 2 Ea. 3412.79

(iii) 8 way (As Raw Power DB {RPDB} GF + FF + SF) 0 Ea. 4025.86 -

(ii) 6 way (As A.C. DB {ACDB} GF + FF + SF) 0 Ea. 3437.03 -

135 RCCBs, 30 mA, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 0 Ea. 2637.11 -

136 RCCBs, 30 mA, 10 KA, 40 Amp.,DP, Cat. III 0 Ea. 2235.13 -

137 MCB, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 0 Ea. 638.32 -

138 MCB single pole 6A to 25A, 10 KA Cat. III (20 Amp) 36 Ea. 112.11

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity, Cat

III, (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity, Cat (III), 6 to

Providing & erecting 415 V MCB Four Pole for Motor &

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity, Cat

Supplying & erecting approved make Four Pole 415V change over

switch interior for panel mounting with operating mechanism

A.C.23 duty confirming to IS for

DESCRIPTION Qty. UNIT AMOUNT

Supplying and erecting approved make suitable panel indicator

143 LED type lamp, lens cover, complete erected with necessary 6 Ea. 43.43

144 class 1 Multi Function Meter with CT (160/5) 2 Ea. 5054.40

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed

145 thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 8 Ea. 6173.12

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral 440V/ 500V panel

mounting Aluminium Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for

phase sequence of following current carrying capacity, erected with

necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. Capacity

Supplying & erecting approved make Electronics Starter and

relay for air conditioners in ABS plastic moulded housing.

Company fabricated with bakelite terminal for connection with

silver coating bimetallic contact in switching device for o/p with

following features.

148 (1) Low Voltage Protection below 130 V 0 Ea. 886.78 -

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp.

(inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

Plastic enclosure fitted with DIN rail suitable for incorporating

One / Two nos. MCB

Plastic enclosure fitted with DIN rail suitable for incorporating

Three /Four nos. MCB

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Supplying & fixing box for housing RCCB + MCB combination made

of 18 SWG sheet steel duly powder coated with gasket, dust &

vermin proof bakelite shield two earthing terminals for following

type of RCCB, RCCB + MCB [b] For 4 Pole

Providing and erecting metallic vitrified danger notice board as

152 per language suggested by engineer incharge for MEDIUM 3 Ea. 69.69

VOLTAGE installation to be erected as per IS-2551.

Providing & erecting Medium Voltage Danger Notice Board

154 sticker as per language suggested by engineer incharge of standard 3 Ea. 26.26

size as per IS-2551

providng and erecting Approved make single phase electronic

energy meter rating 5A/20A/40A based on ASIC (Application

Specific integral circuit) digital technology with accuracy Class-I,

temper proof, free from effect of external magnetic field with phase,

earth, reverse and impulse indications, 6 digit electro-mechanical

counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in

robust enclosure complete to be erected as directed with 3 year

replacement guarantee. Cat. III

providng and erecting Approved make energy meter 3 phase

wire unbalanced load rating, 10A to 60 Amp. based on

ASIC(Application specific Integral Circuits) digital technology with

accuracy Class - 1 , temper proof, free from effect of external

magnetic field with 3 phase indication, earth & impulse indication,

6 digit electro mechanical impulse counter, suitable work on 120 V

to 300V per phase 45-55 HZ, housed in robust enclosure with

erection as directed. Cat. III

DESCRIPTION Qty. UNIT AMOUNT

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board necessary

IP-42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable

alley as per requirements & instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of

hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(A) locally fabricated panel board -

(i) with 350 mm depth 4 Sq. Mtr 10468.65

INDOOR LIGHTING ITEM

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.9, THD < 15%,CCT

Luminaire efficacy> 85 lumens/watt ,LED

158 LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet, Cat. III 0 Ea. 165.64 -

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Ea. 295.93 -

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 144 Ea. 373.70

Supplying and erecting LED lamps with following wattage capacity

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder, Cat. III

(i) 2 to 3 watts 0 Ea. 69.69 -

(ii) 5 to 8 watts 0 Ea. 112.11 -

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15 %,CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

160 fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(ii) 11-15 watts, Surge-2 KV, Cat. III 0 Ea. 427.23 -

(iii) 16-20 watts, Surge-2 KV, Cat. III 0 Ea. 589.84 -

(iv) 22-24 watts, Surge-2 KV, Cat. III 0 Ea. 758.51 -

(B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Ct. III 0 Ea. 1794.77 -

DESCRIPTION Qty. UNIT AMOUNT

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (vi) 34 Ea. 9647.52

above 160 to 200 watts Cat. III

FAN AND RELEATED ITEM

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B,

Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, copper winding, Power factor not < 0.9, Service

Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control and all

remaining accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete

as required.[ Make shall be approved by Engineer in Charge]

(A) 1200 mm Sweep (48")

HVLS Jumbo Fan having 12"Feet Long 5 nos. Alluminium metal

grade 6061 blades, 1.5 HP motor [1.1 KW motor], Mild Steel Body

high Strength Fabrication, Weight approx 70 to 80 KG, Powder

coated body Structure, Input Power 3 Phase, 440 V

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

164 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with 17 Ea. 1948.29

aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

165 M.S. Pipe down rod erected duly painted for fan complete with 34 Mtr. 108.07

proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan

hook or Fan box.

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size and

maximum speed in RPM

[A] 305 mm dia 900 RPM, Cat. III 14 Ea 2054.34

[E] 450 mm dia 1400 RPM, Cat.II 3 Ea 3939.06

169 Providing suitable M.S. louver shutter of the Exhaust fan. 0 Ea. 368.65 -

Supplying & erecting electro galvanised G.I. wire micro mesh jali

170 cover of grade 304 required size with suitable wooden frame duly 0 Sq. Mtr 634.28 -

fitted in wall outside of exhaust fan for insect protection.

Providing & erecting fresh air fan 250 mm dia with square frame

make of ABS body with louvers, Cat. III

DESCRIPTION Qty. UNIT AMOUNT

Supplying and erecting approved make oscillating type medium

duty bracket fan with Aluminium Blades A.C. 23OV. 50cy/s, with

thermal overload protection wall mounted with height adjustment

172 and rotary tilting device complete with guard, pull cord for speed 0 Ea. 3518.44 -

and oscillation flexible Core plug top complete erected with lead

wires as directed.

EARTHING SYSTEM

Providing and erecting required size HOT deep Galvanised iron

173 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, 10 Kg. 77.77

Motors etc. using proper clamp.

174 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1 Kg. 794.87

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing and erecting Pipe type earthing having 150 cms. long

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

SWG earth wire.

Providing and erecting Pipe type earthing with 40 mm dia

mtr long 'B' grade G.I. pipe with necessary coupling buch buried in

specially prepared earth pit & G.I. earth wire of 8 SWG erected &

connected as directed

For using salt and charcoal / coke as required for pipe type

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to submit

test certificate including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr 0 Ea. 7095.25 -

-Back filling Compound :1 no. Bag of 25 Kg. two for body earth and

one for neutral earth

[C] For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA)i.e. independent Earthing

located in other than normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

180 cable 1.1 KV grade to be erected as directed of following size.

(J) 4 core 2.5 Sq. mm 150 Ea. 168.67

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

181 with necessary clamps or in existing trench / pipe of following size

of cables (From DISCOM energy meter to Main L.T. panel)

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 30 Mtr. 731.24

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

182 with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 25 Mtr. 1349.36

Making trench in soft soil of suitable width of 90 cm deep for

183 laying cable or locating the fault all over the run and back filling 0 Mtr. 55.55 -

the same and making the surface as normal ground.

DESCRIPTION Qty. UNIT AMOUNT

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm.

below ground across the road crossing or on floor with necessary

material in an approved manner and making the ground as per

original. (F) 100 mm dia.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required -

185 depth in existing trench for laying of cable. below ground / road

surface for enclosing cable,

(A)50 mm outer dia 250 Mtr. 62.62

(B)63mm outer dia 100 Mtr. 73.73

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

186 with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 0 Mtr. 1349.36 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe at road

187 crossing or floor of following size of cables.

(A) 4 core 2.5 Sq. mm 0 Mtr. 271.69 -

(B) 4 core 4 Sq. mm 0 Mtr. 364.61 -

(C) 4 core 6 Sq. mm 0 Mtr. 510.05 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe at road crossing

or floor of following size of cables.

(A) 4 core 10 Sq. mm 0 Mtr. 676.70 -

(B) 4 core 16 Sq. mm 0 Mtr. 987.78 -

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of following

(B) 4 core 6 Sq. mm 0 Mtr. 126.25 -

(C) 4 core 10 Sq. mm 300 Mtr. 140.39

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

(A) 4 core 16 Sq. mm 600 Mtr. 153.52

(B) 4 core 25 Sq. mm 0 Mtr. 190.89 -

(C) 4 core 35 Sq. mm 50 Mtr. 255.53

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

191 (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 0 Mtr. 183.82 -

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 0 Mtr. 220.18 -

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 0 Mtr. 284.82 -

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) 100 Mtr. 378.75

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) 0 Mtr. 490.86 -

Providing and, fixing heavy duty flange type brass double

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating

tape etc for following size of cables.

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm 0 Ea. 38.38 -

(C) 2 to 4 core 10 Sq. mm 0 Ea. 38.38 -

(D) 2 to 4 core 16 Sq. mm 0 Ea. 47.47 -

(E) 2 to 4 core 25 Sq. mm 0 Ea. 51.51 -

DESCRIPTION Qty. UNIT AMOUNT

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [C] CAT -

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

197 cable 1.1 KV grade to be erected as directed of following size.

(E) 12 core 2.5 sq.mm 0 Mtr 396.93 -

WATER COOLER AND PURIFIER

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

199 SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 2 Ea. 11615.00

Supplying & erecting bank of all polypropylene condenser (APP

type) with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of

P.F. correction for operation on 3 phase 50 c/s, 400 /440V (+ / -

200 10%) with externally discharging resistance, earthing terminal & 0 Ea. 696.90 -

built on angle iron of channel iron frame work and provided with

terminal cover box. Complete erected on provided iron bracket or

on floor duly tested by license.

PUMP SETS AND STARTERS

Providing & erecting open well horizontal mono block pump set

with cast iron body, complete for three phase submersible motor

[B] For 2 HP 3 phase open well horizontal mono block pump set

suitable for 200 LPM @ 25 mtr head suitable for 50 mm dia 2 Ea 10734.28

delivery pipe Cat.III

Supplying submersible pump set suitable for bore of 100 mm.

dia. or more having three phase motor capacity not more than 3

H.P. of different range with following capacity

(A) (20 stage) 170 to 185 LPM discharge at 57 to 48 mtrs.

Respectively head suitable for 50 mm dia. delivery pipe, Cat. III

Supplying & erecting approved make self-priming domestic

monoblock water pump with 1 H.P motor, suitable for operation

on 230 volts, 50c/s. AC supply with metallic flange, and M.S.

impeller delivery and following discharge

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia. Delivery. Cat.III

Supplying and erecting push button operated fully automatic Star-

Delta starter with 3 Nos. of 15A.rating contactors and directly

operated thermal overload relay having 10-21A range and

204 erected in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C.

motors from 7.5 to 15H.P. complete erected on

(A) P.W. Block with necessary connection, Cat.III 0 Ea. 9758.62 -

(B) Angle iron frame add to the above 0 Ea. 184.83 -

DESCRIPTION Qty. UNIT AMOUNT

Supplying and erecting Direct On-line Electronics Starter with 2-

5/4-10/8-14/10-16 Amp. Rating relay (variable current setting)

directly operated in totally insulated elegant enclosure and 18 Amp.

Rating power relay with start - stop button for single phase

operation up to 3 HP as per complete erected on P.W. Block with

following features.

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking,

arrangement consisting of suitable size of ON- OFF isolator (AC -

3/23duty) main fuses, single phasing preventer, indicating lamps

206 for R- Y - B phases, overload relay, Automatic water level controller, 3 Ea. 7722.46

Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors will be of

L & T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of Engineer in

charge on site complete with wiring connection with existing wires

, with copper conductor from pump to upper and lower tank.

Providing and erecting ISI marked PVC insulated PVC Sheathed

Flat flexible Submersible copper cable approved make of following -

(B) 3 Core x 2.5 Sq. mm. 150 Mtr. 104.03

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB

with 20 Amp. Plug socket, company fabricated powder coated -

98 sheet steel enclosure erected as directed with connection.

[A] Metal Clad Socket with metal clad top. Cat.III 0 Ea. 527.22 -

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 0 Ea. 660.54 -

INVERTOR STABILIZER

Supplying and erecting of 1850VA Sine wave Digital Inverter

Supplying and erecting of 12V/150AH Tubular battery for 1 hrs

battery backup.

211 Supplying and erecting of 1KVA Stabilizer. 0 Ea. 10225.64 -

Supplying and erecting approved make online Un-

interruptible Power Supply system comprising flat cum-boost

charger, static Inverter & sealed maintenance free SMF batteries.

The charger having operating capacity for input 160-270V AC &

inverter having output 230V,50 Hz Ac with 0.8 load power factor

with battery, over/under voltage output with over load & short

212 circuit protection equipment. The system housed in CRC sheet duly

powder coated paint with following power backup.with MS painted

batteries stand, 10% Overload capacity for momentary load. (FOR

class room) (A) 1 KVA with 1Hr Backup

(B) 2KVA with 1Hr Backup 0 Ea. 47899.25 -

(C) 3 KVA with 1Hr Backup 0 Ea. 82941.20 -

(D) 5 KVA with 1Hr Backup 0 Ea. 130103.15 -

OUTDOOR & CAMPUS LIGHTING ITEM

Supply of approved make FRP Pole having following

specifications: FRP Light Pole made by CNC filament winding

machine using thermoset resin polyester/epoxy resin system)

having minimum 62% glass content. The pole should be in one

piece and tapered round in shape, having smooth finish and should

be totally free from corrosion as well as non conductive & shock

proof Pole should be provided with FRP Anchor Base and it should

be heavy duty, or MS Material duly painted with Epoxy paint.

DESCRIPTION Qty. UNIT AMOUNT

Pole should be flame retardant as per IS 6746. Resin used shall be

UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of

the pole shall not exceed more than 10% of the length of pole for

the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some

interchangeability features of poles as per standard ANSI C

latest version or ASTM D 4923/01 including cable termination box

with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement

(1) Suitable for base plate mounting single arm Bracket.

[F] Overall length of 5 Mtr. Average Thickness: 7.5mm

OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 3 Nos. 11719.03

kg approx. (Without Base) Anchor Base (Size 250X250 & 16mm th.)

[J] Overall length of 7 Mtr.Average Thickness: 7.5mm. Top/ Bottom

OD Dia A/F 89/183 mm ± 2mm approx. approx. Weight of Pole

kg approx. (Without Base) Anchor Base (Size 300X300 & 18mm

(2) Suitable for base plate mounting Double arm Bracket.

[H] Overall length of 7.0 Mtr. Average Thickness: 7.5mm.Top/

Bottom OD Dia: 90/170 mm ± 2mm approx. approx. Weight of Pole 2 Nos. 16691.26

Providing FRP arm bracket of having 2 sets of suitable SS304

hardware for fixing the brackets & spread of 1.2 Mtr(Suitable for

to 114 mm pole top dia)

(A) Single arm bracket 11 Nos. 2234.12

(B) Double arm bracket 1 Nos. 3450.16

(C) Triple arm bracket 1 Nos. 4447.03

216 SETC of GI Pipe Pole | 6 m Long 0 Nos. 5470.00 -

217 SETC of Bracket | single arm 0.5 m 0 Nos. 973.00 -

218 SETC of Bracket | Double arm 0.5 m 0 Nos. 1364.00 -

219 SETC of Bracket | Triple arm 0.5 m 0 Nos. 2441.00 -

220 SETC of Bracket | single arm 1.0 m 0 Nos. 1586.00 -

221 SETC of Bracket | Double arm 1.0 m 0 Nos. 2513.00 -

222 SETC of Bracket | Triple arm 1.0 m 0 Nos. 3308.00 -

Providing & Constructing 1:2:4 CC foundation of 6 m long GI Pipe

Supply and laying of GI "B" grade pipe for cable guard/ road

crossing with making of Zari for 40 mm Ø

Supply and laying of GI "B" grade pipe for cable guard/ road

crossing with making of Zari for 50 mm Ø

226 Cable end termination for 4 x 6 sq mm (Single Cable) 0 Nos. 130.00 -

227 Cable end termination for 4 x 10 sq mm (Single Cable) 0 Nos. 150.00 -

228 Cable end termination for 4 x 16 sq mm (Single Cable) 30 Nos. 212.40

SETC of 1.1 kV grade XLPE insulated Al conductor armoured cable |

SETC of 1.1 kV grade XLPE insulated Al conductor armoured cable |

Laying of cable with excavation of trench having depth of 75 cms

231 and refilling with clay and covering with 38 mm Ø ID DWC pipe to 0 m 150.00 -

be laid in | Soft soil/ Kachcha Road

Laying of cable with excavation of trench having depth of 75 cms

232 and refilling with clay and covering with 38 mm Ø ID DWC pipe to 0 m 180.00 -

be laid in | Hard Murrum/ Asphalt Road

Laying of cable with excavation of trench having depth of 75 cms

233 and refilling with clay and covering with 50 mm Ø ID DWC pipe to 250 m 160.00

be laid in | Soft soil/ Kachcha Road

Laying of cable with excavation of trench having depth of 75 cms

234 and refilling with clay and covering with 50 mm Ø ID DWC pipe to 0 m 190.00 -

be laid in | Hard Murrum/ Asphalt Road

Supply & erecting PVC/ XLPE insulated ISI marked unarmoured

copper cable 1.1 kV grade | 3 x 1.5 sq mm

Supply & erecting PVC/ XLPE insulated ISI marked unarmoured

copper cable 1.1 kV grade | 3 x 2.5 sq mm

SETC of SMC press moulded composite FRP (Plastic) loop- in, loop-

237 out, dust & water proof, junction box, 2 mm thickness as per 13 Nos. 1050.00

detailed specifications, terms & conditions of the tender: -

DESCRIPTION Qty. UNIT AMOUNT

S.E.T.C. of LED Streetlight Luminaires complete with all accessories

for Road having width of 12 m (Side Arrangement) ≈ 40 W

S.E.T.C. of LED Streetlight Luminaires complete with all accessories

for Road having width of 18 m (Side Arrangement) ≈ 120 W

241 SETC of CCMS with GI Box {Capacity 6 kW, 1 Ø} & foundation 0 Nos. 51300.00 -

242 SETC of CCMS with GI Box {Capacity 9 kW, 3 Ø} & foundation 0 Nos. 62900.00 -

Painting the number and words for (streetlight pole numbering and

back ground of colour as per Zone Code) inventory Identification

with good quality of enamelled paint up to 20 characters + 50 mm

Pipe type Earthing having 150 cms long and 2.5 cms. Ø GI pipe with

coupling and buch buried in specially prepared earth pit complete

with necessary 25 x 3 mm size GI earthing strip using salt and

charcoal/ coke as required for pipe type earthing

AREA & GROUND DEVELOPMENT

(A) PAVER BLOCK & VDS ROAD

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and

depositing on the road side slope as directed up to 50 mt. lead.

SMC SOR-PAGE NO 20 IT NO GD.1

Preparation of subgrade with compacting, Leveling and

consolidation of subgrade with miniroller/plate vibrator machine

including watering and filling in depression occur the process as

directed by engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.2

Providing & laying Granular Sub Base(GSB) confirming to Grading

V of Table 400.0 of compacted th. Of 150 mm with specified graded

stone metal and sand mixed in place and laid with mechanical

means spreading with motor grader and compactiong with

vibratory roller having miimum 80-100 KN static weight to achieve

desired dencity of 98 % of MDD including all material, labour,

machinery with all leads and lifts etc. comp.

SMC SOR-PAGE NO 20 IT NO GD.9

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

248 Crushed stone agg 20m.m Nominal size) &curing comp. excl. cost 197.00 C.M. 3095.25

of form work in :(a) foundation & Plinth

SMC SOR-PAGE NO 1 IT NO

providing and laying 200 micron plastic sheet on prepared sub

249 base as per instruction of Engg. In charge etc. complete. 898.00 S.M. 26.00

SMC SOR-PAGE NO 20 IT NO GD.12 MR

Supplying & filling fine sand (pana) in 75 mm /100 mm /

150mm compacted thickness over the base including necessary

250 compaction, watering etc. compacted. Item includes levelling by 162.00 C.M. 413.09

using vibratory plates compacted machine and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.4

Providing 100mm th. Ready made C.C. kerb of strength M-20 (Size

300mm X 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line level and in truly vertical postion,

including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone

dust ) smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed by

engineer in charge.

SMC SOR-PAGE NO 20 IT NO GD.6 MR

Providing interlocking type Rubber moulding cement concrete

Paver Block of approved shape, design & colour having 60 mm

thickness (M-35) Purchased from S.M.C's approved paverblock

manufactures only & fixing on fine sand bedding. Item includes

leveling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. Complete

With colour 639.00 S.M. 524.00

Without colour 639.00 S.M. 524.00

SMC SOR-PAGE NO 20 IT NO GD.7 MR

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

watering, ramming & consolidation etc. complete.

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR-PAGE NO 20 IT NO GD.3

Providing & filling in plinth with murrum or selected soil in layers

254 of 20 cm. Th'. Incl. watering, ramming & consolidation etc. 1764.00 C.M. 301.78

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete Pavement using 1:1.5:3 (1

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete.

Internal road 112.00 C.M. 5981.00

SMC SOR-PAGE NO 20 IT NO GD.10

Cutting of Groove 5.00 to 7.00 mm th. In VDS for depth of 1/3 of

256 total thickness with filling of epoxy sealent as directed by engineer 350.00 R.MT 50.00

SMC SOR-PAGE NO 20 IT NO GD.13

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

257 R.C.C. work incl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 4480.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

(B) COMPOUND WALL & MAIN GATE

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

for 250 mm dia 252.00 R.M 334.80

for 300 mm dia 75.00 R.M 401.28

SMC SOR-PAGE NO 9 IT NO

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

( 1 ) up to 1.5 mt. Depth 39.00 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

260 sand:8 gradedstone agg. 40 mm nominal size) & curing comp.

excl.cost of form work in

(A) Foundation and plinth 8.00 C.M. 2769.69

SMC SOR-PAGE NO 1 IT NO

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in

(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in

( B ) Ground Beam:

(1)Having c/s area up to 0.08s.mt

upto G.L./P.L. 24.00 C.M. 9102.61

(2) Having cross sectional area 0.08 to 0.12 sq. mt .

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in

(1) Having c/s area up to 0.08 sq.mt. 0.00 C.M. 12844.32 -

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C. 1:3:6 (1 cement : 3 sand : 6 stone agg.

264 mm nominal size) & curing complete including cost of formwork in 10.00 C.M. 4085.83

wall caps & copping.

SMC SOR-PAGE NO 9 IT NO

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

265 depth consolidating each disposited layer by ramming and 40.00 C.M. 136.92

SMC SOR-PAGE NO 1 IT NO

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 6070.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

3 graded stone agg. 20 mm nominal size) finishing smooth curing

etc. comp. Incld. Cost of form work but excl. Cost of reinforcement

for R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 s.mt 19.00 C.M 12844.32

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

(1)Having c/s area up to 0.08 s.mt 0.00 C.M 9102.61 -

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

SMC SOR-PAGE NO 1 IT NO

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. workincl. bending, binding & placing in position etc. comp.

Upto G.L./P.L. 3970.00 Kg. 77.29

SMC SOR-PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having

crushing strengthnot less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

At ground floor 147.00 C.M. 4729.83

SMC SOR-PAGE NO 2 IT NO

Half brick masonry in common brunt clay building bricks having

crushingstrength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

270 (1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash

At ground floor 0.00 S.M. 712.81 -

SMC SOR-PAGE NO 2 IT NO

Providing & Applying 10mm.th.cement plaster in single coat on

brick/concrete walls similar surfaces for plastering & finished even

271 & smooth with afloating coat of cement slurry mixed with

admixture of lime or neeru inrequired proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

At Ground Floor 0.00 S.M. 199.28 -

(B) For ceilings & soffits

At Ground Floor 0.00 S.M. 225.34 -

SMC SOR-PAGE NO 3 IT NO

20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick

272 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

At Ground Floor 1360.00 S.M. 347.42

SMC SOR-PAGE NO 3 IT NO

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor

At Ground Floor 0.00 R.M. 43.74 -

SMC SOR-PAGE NO 3 IT NO

274 Pro. smooth plaster patta

At Ground Floor 911.00 R.M. 50.00

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

At Ground Floor 433.00 R.M. 50.00

SMC SOR-PAGE NO 3 IT NO

DESCRIPTION Qty. UNIT AMOUNT

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi, algae and flaking paint. This

276 can be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for

4-5 hours. Application of putty is not recommended. Minimum 4-6

hours duration is required between each coat of weather shield

(A) For wall 1367.00 S.M 82.00

SMC SOR- COLOUR WORK PAGE NO 16 IT NO

M.S. Gate Steel work welded in built up sections,frame work

277 including cutting, hoisting, fixing in position and applying apriming

coat of red lead paint :-

(A) In beams and joists channels angles, tees, flats with connection

plats or angle cleats as in main and cross beams, hip and trussed

purlins connected to common raffers and the like.

Ground Floor 6.50 Qtl 9108.48

SMC SOR-PAGE NO 9 IT NO 98(A)

Providing & fixing M.S. Grills of required pattern to wooden

frames of windows etc. at all floor levels with M.S. flats at required

spacing & frame around square or round bars with round headed

bolts & round headed bolts and nuts or by screws incl. Priming coat

of Red lead paint etc. comp. (A) Plain Grill For all floors

All Floor 6061.00 KG. 109.41

SMC SOR-PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

279 an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

Ground Floor 455.00 S.M. 68.57

SMC SOR- COLOUR WORK PAGE NO 15 IT NO

(C) WATER SUPPLY & SANITARY

Providing and constructing simple chamber of 23cm. of B.B.

masonary wall in c.m. 1:5 incl. 15mm. thick cement plaster in c.m

1:3 inside and out side to exposed faces R.C.C. top slab with1:2:4

280 mix (1 cement : 2 sand : 4 grade ston aggregate 20mm size), 15.00 No 2932.93

foundation concrete 1:5:10 with fixing Precast RCC. heavy duty

cover on top etc. inside dimension 455 x 610mm & 450mm deep for

SMC SOR-PAGE NO 7 IT NO

Providing, Lowering & laying joining R.C.C NP2 CLASS pipe in C.M

281 1:1 of following nominal internal diameters incl. Testing of pipes

and joints etc. Comp

SMC SOR-PAGE NO 7 IT NO

SMC DRAINGAE SOR-22-23

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

DESCRIPTION Qty. UNIT AMOUNT

SMC SOR-PAGE NO 8 IT NO

Providing and fixing C.P brass screw down bib tap at all floor level

polished bright etc. comp.

SMC SOR-PAGE NO 8 IT NO

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC SOR-PAGE NO 8 IT NO

(D) RECHARGE BORE WELL

Drilling 300 mm diameter borewell in all types of strata up to

required depth including cost of bentonite powder, carting rings,

cutter, other required materials, labour charges etc. complete. The

drilling shall be done by mud flushed rotary equipment and bore

285 holes should withstand at least till completion of subsequent 41.18 R.M 857.00

activities like assembly jointing, lowering of casing / strainer pipes,

gravels packing, yield testing etc, complete up to required depth as

shown in drawing and directed by engineer –in- charge.

CE/HYD/01/2024-25 IT No

Supplying and filling clean best quality of well sorted - " SEVALIYA"

sorted pea gravel having size 6 mm to 10 mm in layer of required

thickness in filter chamber as per drawing and as directed by

Engineer –in- charge.

CE/HYD/01/2024-25 IT No

Providing and fitting bail plug having length 0.45mtr. from M.S

medium class pipe as per ISI for 200 mm diameter pipe.

Development of each water bearing zone come across up to the

depth of tube well (size 250 mm diameter & depth more then 150 JOB

ft.) by lowering 100 mm diameter drop line and 32 mm diameter GI WORK

air line for each Zone with air compressor of capacity not less.

Providing & Fixing MS Clamps with threaded of standard make

suitable for ERW pipes.

(a) For 200 mm Diameter ERW blank pipe with size 750 x 75mm x

10mm thick suitable for 200mm diameter.

Excavation for foundation in and all kinds of soil including leveling

and ramming the bottom of trenches and foundation pits, shoring,

290 strutting, dewatering if required, slush removing, filling the sides

up to original ground level for rectangular chamber and trench.

CE/HYD/01/2024-25 IT No

Providing and laying Cement Concrete M-100 grade 1:3:6 (1

cement: 3 coarse sand : 6 hand brocken stone aggregate 20mm

291 nominal size ) and curing complete excluding cost of form work in 0.62 C.M 3005.76

chamber P.C.C(without forms work) work complete. .( S.O.R.-2023-

SOR 23-24 IT-05 PG-01

Providing & laying Fly ash Brick masonary having crushing

strength not less then 70kg/sq.cm. 1:6 (1 cement : 6 fine sand) with

scaffolding, watering, curing etc. complete with all labours and

materials.various area as directed by incharge .

SOR 23-24 IT-16 PG-02

Providing 10mm thick Cement Plaster in single coat on

brick/concrete walls far interior plastering up to Floor two level

and finished even and smooth in cement morter 1:3(1 cement

sand various area as directed by incharge) .

SOR 23-24 IT-24 PG-03

Providing, fixing M.S Jali frammed work (three piece with handle

fitting) on Opening portion Precast Module Structure for

Prevention of Recharge bore well structure,size including framme,

heavy required Angle (40 x 40 x 6mm), flat pati (25 x 6mm),cuttin

SOR 23-24 IT-98 PG-09

Providing & Supplying 200mm dia mater 1.5mm L.C.G (Low

Carbon Galvanise) 'V' wire screen pipe of Johnson or approved

295 make ISI including lowering, fixing, jointing in bore hole as per 12.00 R.M 2100.00

aquifer depth and pipe assembly given as per site condition Soil

DESCRIPTION Qty. UNIT AMOUNT

Providing, Supplying, Fixing in bore hole 6Kg/cm2 P.V.C Pipe of

approved Quality (Prince,Suprem,Finolex) with ISI mark including

nesessary fittings and providing as per site sitution and directed by

Engineer –in- charge. ( 200 mm ( 8'') dia

Providing, Supplying, Fixing P.V.C. 6 Kg/Cm2 Pipe IS stanadard for

down take / inlet from Bldg./ Structure to Sand filter Chamber,

including piping/ plumbing, fitting, wall clamping, necessary

excavation and filling etc. complete as per site situation

(a) 110mm Dia.,6 Kg/Cm2 P.V.C. pipe. 3.50 R.M 325.00

(b) 160mm Dia., 6 Kg/Cm2 P.V.C. pipe. 10.00 R.M 525.00

Providing, supplying, fixing and installing M 300 Grade. precast

size 1.5 dia x 2.35 mt. height ,top 75mm thick in 2 half pieces Sand

Filteration chamber (2 layer Type of Precast module )as per Design,

Drawing.including necessary excavation, filling, dr

(a) 1 layer type of Precast module 0.00 NO. 18500.00 -

(b) 2 layer Type of Precast module 1.00 NO. 25000.00

Proving & fixing in position Johnson make and equivalent ... 'V' wire

L.C.G screen pipe 1.00 mm size of filter assembly of pair –ID

205mm & OD 217.50mm of 0.5mm slot size and ID 416 mm and OD

428 mm of 1.00mm slot size as per site situation

(a) 1.0 mt. length. 0.00 SET 7500.00 -

(b) 2.0 mt. Length. 1.00 SET 14000.00

Borehole Video photography all the fresh new fresh new bores or

300 few selected as desired for better understanding & clarity of work 1.00 JOB 4000.00

undertaken as directed by Engineer -in-charge.

Supplying water tankers for constant water supply at tube well

Compressor work and cleaning of work site after completion of

entire job (testing) inluding cleaning of mud etc.Location as

directed by Engineer-in-charge.

Providing and Fixing Recharge Borewell name boards as per

standard I.R.C type design of steel plate including painting lettering

etc. complete with fixing in C.C 1:4:8 block with necessary

Soil Investigation Test report from Govt.approved authorised

laboratary (Prior inserting bore Pipe) of each bore shall be EACH

submitted by Contractor and soil sample of various starta shall be BORE

first collected in Polythene bag and than submitted in transparent

Removal of surplus excavated earth of excavated mud-pits and

304 water harvesting chambers up to the lead of 5.0 km as per the 3.60 C.M 65.00

instruction of Engineer In Charge

(E) SECURITY CABIN, PUMP ROOM & PARKING SHED

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc.Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(A) Loose or soft soil

(1) Up to 1.5 Mt. depth 142.00 C.M 123.13

SMC SOR-PAGE NO 1 IT NO

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed

307 stone agg 20m.m Nominal size)&curing comp. excl. cost of form

work in :(a) foundation & Plinth

(A) Foundation 16.00 C.M 3095.25

SMC SOR-PAGE NO 1 IT NO

providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 design mix concrete as per IS 456:2000 (latest

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement.-

(A) foundation, footing, base of columns and mass concrete

SMC SOR-PAGE NO 14 MIX DESIGN

Providing, mixing, placing, compacting by machine vibrator, curing,

testing M25 design mix concrete as per IS 456:2000 (latest

309 revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement.

work in : Upto G.L./P.L.

DESCRIPTION Qty. UNIT AMOUNT

(2) Having cross sectional area more than 0.085 sq. mt.up to

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57 -

(2) Having cros sectional area more than 0.08 sq. mt and upto

SMC SOR-PAGE NO 14 MIX DESIGN

Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

graded stone agg. 20 mm nominal size) & curing comp. Includ. cost

310 of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

(C) Grade slab 63.00 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

311 R.C.C. work incl. bending, binding & placing in position etc. comp. 6755.00 Kg 77.29

SMC SOR, ITEM NO.-

Providing & construction brick work using Fly Ash bricks having

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp. - Ground Floor

(SOR SMC Pg No. 1 It No. 9) 6.00 C.M. 4441.11

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 154.00 C.M. 136.92

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

314 coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vertical ( two times ) up to good

quality and size of grain in elevation as per directed by engineer

(SOR SMC Pg No. 3 It No. 28) MR 33.00 S.M 324.00

Providing & applying two coats of weather shield max paint (3

coats may be required in case of darker colours.)of ICI Dulux or

Apex Ultima of Asian Paint including applying exterior acrylic

primer coat as per manufacturers specification and directions in

shade and colour approved by architects, on exterior surfaces of the

building including scaffolding, preparing the surface, watering,

curing etc. complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry and free

from all loose dirt, chalk, grease, fungi,algae and flaking paint. This

315 can be achieved by brushing with a wire/ stiff coir brush, followed 33.00 S.M 82.00

by water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly

using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and allow it

to dry for 4-5 hours.Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No. 16 -

WORK ABOVE PLINTH LEVEL -

Providing, mixing, placing, compacting by machine vibrator, curing,

316 testing M25 Design mix concrete as per IS 456:2000 (latest -

revision) and as per tender specification in all items including cost

of form work and rendering but excluding cost of reinforcement

(A) Columns : -

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 2.20 C.M. 11253.32

(SOR SMC - MIX DESIGN PG. NO-14)

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 4.00 C.M. 8155.37

(SOR SMC - MIX DESIGN PG. NO-14)

(4) Having more than 13 cm. Thickness

DESCRIPTION Qty. UNIT AMOUNT

Ground Floor 5.00 C.M. 6793.97

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 0.80 C.M. 9963.33

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.40 C.M. 7119.46

(SOR SMC - MIX DESIGN PG. NO-14)

317 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.---

Ground Floor 1926.00 Kg 77.29

Brick work using common burnt clay building bricks having

318 crushing strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6

(1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 25.00 C.M. 4729.83

First Floor 4.00 C.M. 5018.55

(SOR SMC Pg No. 2 It No. 16)

Providing & Applying 15mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

319 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in C.M

1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 150.00 S.M 249.39

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on

brick/ concrete walls similar surfaces for plastering & finished even

320 & smooth with a floating coat of cement slurry mixed with

admixture of lime or neeru in required proportion etc. comp. in

C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 39.00 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire

mesh (FRP / PVC) at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag

by cement mortar 1:3 before applying the plaster, including curing,

scaffolding all complete as directed.

Ground floor 11.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat 12 mm

thick cement plaster in cement mortar (1 Cement : 4 coarse sand)

in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding

curing etc. complete.

Ground Floor 125.00 S.M 286.10

(SOR SMC Pg No. 3 It No. 27) MR

Providing throating or plaster drip and moulding it to R.C.C. chajja

etc.comp.. For all floor

Ground Floor 19.00 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Ground Floor 19.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

325 jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

Ground Floor 39.00 S.M 1019.39

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished Kota stone slab 25mm thick in risers

of steps,skirting Dedo and pillars laid on 10mm thick cement

mortar 1:3 (1-cement : 3-coarse sand) and jointed with gray

cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Ground Floor 8.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

DESCRIPTION Qty. UNIT AMOUNT

Providing and constructing sandwitch type Granite stone platform

0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

327 th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

Ground Floor 1.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

328 including thoroughly brushing the surface free from mortar

dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 189.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 189.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an

329 even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

(A) for wall and similar surfaces

For all Floors 125.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 0.00 S.M 83.36 -

SMC SOR , coiour works,Pg No.15,item no.-5

Providing and applying textured plaster as per design of ICI Dulux

or of Asian paint as per manufacturers specification and directions

in shade and colour approved by architects, on exterior surfaces of

330 the building including scaffolding, preparing the surface, watering, 125.00 S.M 875.00

curing etc. complete and as directed by the architects and

Providing & fixing 35mm.th. Flush Door Solid Double Core type

Both Face water proof Ply Vennered & 1.5 mm th.laminate shall

be pasted on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade &

texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum

fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 9.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium colour

anodized section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

332 vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal 0.00 S.M 1705.67 -

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.For all Floors.

(A) Same as above but colour anodized 5.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing & laying granite slab 18 mm thick in Window-Door

seal,Frames Etc laid on 10 mm thick cement mortar 1:4 (1 Cement:

4 Coarse sand) with necessary adhesive material and finished with

flush pointing in white or colour cement, including rubbing &

polishing comp. (Basic Rate: Rs. 1000.00/S.M.).For all Floors.

For all Floors. 13.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

DESCRIPTION Qty. UNIT AMOUNT

Labour Charges For Edge Finished For Granite for all floors

For all Floors. 129.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Steel work welded in built up sections,frame work including

cutting, hoisting, fixing in position and applying apriming coat of

red lead paint :-

335 (A) In beams and joists channels angles, tees, flats with connection

plats or angle cleats as in main and cross beams, hip and trussed 150.32 Qtl 9108.48

purlins connected to common raffers and the like.

SMC SOR-PAGE NO 9 IT NO

Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in

1:1.5:3 concrete also horizontaly in line and connecting to purline

angle etc by welding rereting etc. (a) Medium duty "B" Class

SMC SOR-PAGE NO 10 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to give

an even shade including cleaning the surface of all dirt, dust and

other foreign matters.

SMC SOR-PAGE NO 15 IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

338 washer filled with white lead etc. Excluding the cost of purlins 505.00 S.M. 999.00

rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR-PAGE NO 9 IT NO

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary

connection with rain water pipes. (i) 0.63mm thick

SMC SOR-PAGE NO 9 IT NO 106 MR

LAWN : Area cleaning and side grading, removing unwanted

materials, plants, chrubs,wild grass, weeds,debris,rubbish,etc.

Excavating up to depth 30 C.M surface dressing leveling, making

slopes for drainage according to landscape, Disposal of unwanted

materials with all labour and tools. Development of lawn including

preparation of bed ground, spreading and mixing the good soil with

Farm Yard Manure, Gypsum, fertilizer soil with farm Yard Manure,

340 Gypsum, Fertilizer bas required hand specified. Planting of lawn 1305.00 S.M 90.00

grass bits roots of approved quality, watering and specified.

Planting of lawn grass bits roots of approved quality, watering, and

specified. Planting of lawn grass watering mowing, weeding etc.

maintenance of developed lawn for a period of 6 months.

(As per Garden Dept.)

Supplying on site plants with following specifications . Plants would

be in good condition and of specified height. The rates would be

inclusive of all taxes, sales tax, Octroi,transportaion etc. complete

341 F.O.R. site. Conditions of plant would be verified at the time of

selction as well delivery. All complete and as per instructions of the

Engineer-in-charge.

Lagerstroemia thorell II - 3.66m ht 10.00 Nos. 270.00

Millingtonia hortensis - 3.66m ht 10.00 Nos. 270.00

Azadirachta Indica - 2.13m ht 20.00 Nos. 270.00

Gresses & Bamboos

Bambusa valgaris - 1.83m ht. 30.00 Nos. 75.00

Nephrolepis exalotta smithi - 0.45x0.30m 40.00 Nos. 20.00

Champa - 3.66m ht. 10.00 Nos. 270.00

(As per Garden Dept.)

DESCRIPTION Qty. UNIT AMOUNT

342 Acoustical Panel Finish: Providing and fitting of acoustic panels

with Standard size & thickness of 1220*2420*9mm of brand

Artois, Smart Pannel, Senses Akustik only in Gradient Pattern.

Panels should have Sound Absorption coefficient (NRC) 0.84.

Formaldehyde emission standards of GB18580-2001 class E1, it

should be a green material with asbestos-free, non-toxic and

tasteless gas under extreme temperature, protecting the ozone 425.50 SM 2921.36

layer, non-irritant and recyclable. acoustic panels have to be Fire-

resistant as per China standard class B1. Good insulation

properties, to prevent transmitting the heat from outdoor to indoor

directly as partition or and ceiling, saving 35% of energy, extending

the life of air conditioning.including all acceessories, material,

labour etc. and complete the work satisfactorily as per instruction

of architect or Engineer-in charge And as per " Architecture" detail.

As per Approved Rates of SMIMER Furniture

Acoustical Grid Ceiling: Providing & Fixing of 600 x

Armstrong, Optra Soft Fibre Acoustical Suspended Ceiling System

with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm

343 Exposed Grid. The tiles should have Humidity Resistance (RH) of 282.50 SM 3262.00

95%, NRC 0.9 -, Light Reflectance ≥85%, Colour White, Fire

Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size

600 x 15mm.Rates of SMIMER Furniture

Plain Gypsum Sheet Ceiling: Providing and fixing of Plain Gypsum

Sheet Ceiling using 80 mm. x 26 mm. x 0.50 mm. thick g. i. Ceiling

Sections, 15 mm. x 45 mm. x 15 mm. x 0.90 mm. thick Intermediate

Channels, 20 mm. x 28 mm. x 30 mm. x 0.50 mm. thick Perimeter

Channels and 25 mm. x 10 mm. x 0.50 mm thick Ceiling Angles, as

per IS 513 & 150 GSM Galvanised finish as per IS 277, including

mm Dia. 45 mm long, Zinc coated, CR1 grade Rawl Plugs, 27 mm x

37 mm x 25 mm x 1.60 mm thick Soffit Cleats, 2.64 mm Dia. High

Carbon Spring Steel Wire Connecting Clip, confirming to IS

344 12.50 mm Th. Tapered Edge Gypsum Board Plain, conforming to IS 162.50 SM 1255.00

2095- Part 1: 2011 Certified Boards, Screw Fixed to Ceiling

Sections, using 25 mm Drywall Screws [material-carbon steel EN-

ISO 7049/50, finish-case hardened Grey Phosphating] at 230 mm

c/c on Ceiling Sections & 150 mm at Periphery of Ceiling. Square

and tapered Edges of the boards shall be jointed and finished so as

to have a flush look, including filling and finishing with Jointing

Compound, conforming to ASTM C475, & Joint Paper Tape etc.

complete with all Material, Labour with all Lead, Lift and Transport

and complete the work satisfactorily as per instruction of Architect

As per Approved Rates of SMIMER Furniture

Wooden + Laminated wall Panel: Providing and fixing of wooden

wall & Ceiling panel using 18 mm ply of brand (Greenply Ecotec,

Sylvan Ply, Bhutan Tuff, Saburi Ply,Century Sainin, Sainik MR),

1.00mm Th. Lamination, Aluminium channel & pipe (75 x 75 x

345 12.5mm), screws etc. complete with all material, labour & 160.50 SM 4005.40

scaffolding with all lead, lift and transport. and finished and

complete the work satisfactorily as per instruction of architect or

Engineer-in charge and as per " architecture" detail.

FIRE FIGHTING SYSTEM

A PUMPS & CONTROL PANELS

346 MAIN PUMP :-

MECHANICAL SEAL, HORIZONTAL END SUCTION TYPEMAIN

PUMP SET, CAPACITY @ 1600LPM AT @ 70METERHEAD, @40HP,

BRONZE IMPELLER, @2900 RPM.(MAKE:- KIRLOSHKAR / LUBI)

347 JOCKEY PUMP :-

VERTICLE INLINE TYPE JOCKEY PUMP SET, CAPACITY @180LPM

AT @ 70 METER HEAD, @5.5HP, @2900 RPM.(MAKE:- 1 NOS 81,506.25

KIRLOSHKAR / LUBI)

348 DIESEL PUMP :-

MECHANICAL SEAL, HORIZONTAL END SUCTION TYPE

DIESEL PUMP SET, CAPACITY @ 1600LPM AT @ 70METER

HEAD, @39HP, BRONZE IMPELLER, @2300 RPM.

(MAKE:- KIRLOSHKAR / LUBI)

349 ELECTRICAL PANEL :-

COMBINED ELECTRICAL AUTO CONTROL PANEL FOR

MAIN + JOCKEY + DIESEL PUMPS WITH EARTHINGS AND

(MAKE:- L&T / SCHINDLER)

350 COPPER FLEXIBLE CABLE WITH CONDUITS & FITTINGS :-

(A) 4 CORE X 6 SQ.MM. (MAIN PUMP) 20 MTRS 152.54

(B) 4 CORE X 2.5 SQ.MM. (JOCKEY PUMP) 10 MTRS 235.46

DESCRIPTION Qty. UNIT AMOUNT

(C) 6 CORE X 1.5 SQ.MM. (DIESEL PUMP) 10 MTRS 235.46

(D) 2 CORE X 1.5 SQ.MM. (PRESSURE SWITCH) 30 MTRS 108.68

(MAKE:- POLYCAB / RR)

(NOTE:- CABLE LENGTH MAY VARRY TENTATIVE)

351 G.I. PERFORATED CABLE TRAY :-

(NOTE:- LENGTH MAY VARRY TENTATIVE)

B PUMP ROOM VALVES & PIPING

352 C.I. "Y" TYPE STRAINER:-

PROVIDING AND FIXING OF C.I. "Y" TYPE STRAINER WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 150MM DIA 1 NOS 17,720.32

353 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 150MM DIA 4 NOS 5,790.32

(B) 100MM DIA 2 NOS 5,200.00

(C) 80MM DIA 1 NOS 2,843.36

(D) 65MM DIA 1 NOS 2,614.42

354 C.I. DUAL PLATE NON-RETURN VALVE :-

PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN

VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER

& RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 100MM DIA 2 NOS 6,350.00

(B) 65MM DIA 1 NOS 4,640.66

355 RUBBER BELLOW :-

PROVIDING AND FIXING OF RUBBER BELLOW WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- EASYFLEX)

(A) 150MM DIA 2 NOS 12,588.19

(B) 100MM DIA 2 NOS 9,400.39

(C) 80MM DIA 1 NOS 7,444.24

(D) 65MM DIA 1 NOS 6,804.26

356 FORGED BRASS BALL VALVE :-

PROVIDING AND FIXING OF FORGED BRASS BALL VALVE

SCREWED END (SUITABLE FOR WORKING PRESSURE

(MAKE:- ZOLOTO / SANT)

(A) 25MM DIA (FOR PUMP HEADER DRAIN) 1 NOS 830.51

(B) 15MM DIA (FOR PRESSURE SWITCH) 3 NOS 728.81

357 PRESSURE GAUGE :-

PROVIDING AND FIXING DIAL TYPE PRESSURE GAUGE

WITH ISOLATION BALL VALVE SUITABLE FOR WORKING

PRESSURE MENTIONED. COST SHALL BE INCLUSIVE OF

PROVIDING ANY SHORT PIECES, NIPPLES, ELBOWS WITH

SYPHONE TUBE ETC REQUIRED. (0-21 KG./CM2)

(MAKE:- BAUMER / H.GURU / EXCEL)

358 PRESSURE SWITCH :-

PROVIDING, FIXING, TESTING AND COMMISSIONING OF

PRESSURE SWITCH SUITABLE FOR AUTOMATION OF

PUMP ETC REQUIRED.

(MAKE:- DANFOSS / HONEYWELL)

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED

PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,

BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,

FITTINGS SUCH AS REDUCERS, TEES, ELBOWS, FLANGES.

INCLUDING CUTTING, WELDING, FIXING IN/ON WALLS,

CEILING BY USING SUITABLE SUPPORTS ETC.

(MAKE:- ASIAN / APOLLO / JINDAL)

(A) 150MM DIA 16 MTRS 2,445.74

(B) 100MM DIA 4 MTRS 1,800.00

(C) 80MM DIA 2 MTRS 1,700.00

(D) 65MM DIA 2 MTRS 955.02

DESCRIPTION Qty. UNIT AMOUNT

(E) 25MM DIA 3 MTRS 550.85

NOTE: - LENGTHS MAY VARRY ACCORDING TO ASSEMBLY /

LOCATION OF PUMPS.

C EXTERNAL HYDRANT & FIRE BRIGADE TANKER INLET

360 4 WAY FIRE BRIGADE INLET : -

PROVIDING AND FIXING OF 4 WAY FIRE BRIGADE INLET

CONNECTIONS MADE OF CI BODY, 150MM DIA FLANGED

INLET WITH 4 NOS OF INBUILT SS, NRV (BODY TYPE) 1 NOS 8,029.88

WITH PVC BLANK CAP & CHAIN.

(MAKE:- AAAG / NEWAGE)

361 2 WAY FIRE BRIGADE INLET : -

PROVIDING AND FIXING OF 2 WAY FIRE BRIGADE INLET

CONNECTIONS MADE OF CI BODY, 100MM DIA FLANGED

INLET WITH 2 NOS OF INBUILT SS, NRV (BODY TYPE) 1 NOS 4,745.76

WITH PVC BLANK CAP & CHAIN.

(MAKE:- AAAG / NEWAGE)

362 BUTTERFLY VALVE :-

PROVIDING AND FIXING OF BUTTERFLY VALVE WITH

MS FLANGES, GI NUT, GI BOLT, GI WASER & RUBBER

GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 150MM DIA (FOR 4 WAY VALVE) 1 NOS 5,790.32

363 C.I. DUAL PLATE NON-RETURN VALVE :-

PROVIDING AND FIXING OF C.I. DUAL PLATE NON-RETURN

VALVE WITH MS FLANGES, GI NUT, GI BOLT, GI WASER

& RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT)

(A) 150MM DIA (FOR 4 WAY VALVE) 1 NOS 7,991.24

364 HYDRANT VALVE :-

PROVIDING AND FIXING OF SS-304 SINGLE OUTLET

FIRE HYDRANT VALVE, HAVING 63MM FEMALE OBLIQUE

TYPE AND 80MM FLANGED INLET, AS PER IS:5290, 4 NOS 8,898.31

ISI MARKED WITH ABS BLANK CAP AND GI CHAIN.

(MAKE:- AAAG / NEWAGE)

# FRP SHEETED DOUBLE DOOR HOSE BOX

SUPPLY, INSTALLATION, TESTING & COMMISISONING OF

G.I. "C" CLASS PIPE AS PER IS 1239 WITH PAINTING

(1 COAT OF ZINC OXIDE PRIMER AND 2 COATS OF PO RED

PAINT), SUITABLE TYPES OF SUPPORTS, HILTI FASTENERS,

BOLTS, NUTS (GALVANISED), CLAMPS, "U" BOLTS,