PERIODICAL SERVICES TO CERTAIN PERMT AND TEMP BLDGS, DAY TO DAY B/R AND E/M MAINTENANCE AND OTHER CONNECTED WORKS AT MIL STN DHARCHULA.

Amount

DESCRIPTION OF ITEMS

M&L for preparation of plastered or unplastered old decorated surfaces of walls applying one coat of white wash on walls complete all as specified and directed.

ditto all as per Item No. 1 above but applying one coat of white wash on ceiling complete all as specified and directed.

M &L for preparation of (previously treated) plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper any tint of walls complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of 3mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of old plastered surface wall by complete removing old surface and applying two coat of acrylic weather proof over one coats of acrylic primer on external surface as per manufactures instructions all as specified and directed.

M &L for preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint on walls complete all as specified and directed.

M &L for preparing old previously treated steel surface of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M &L for preparing old previously treated surface of wood and wood based surfaces of any description not other wise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

M & L preparing old previously treated surfaces of corrugated/plain sheets as in roof covering /wall over 10 cm girth or width and applying two coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material and Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.

M/L for Vitrified ceramic tiles 10 mm thick (Square/Rectangular), light shade, polished area of each tiles tile exceeding 0.36 sqm and not exceeding 0. 42 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles with as in floor, finished the surface rough to receive tiles complete all as spfd & directed.

Material and Labour for glazed tiles, coloured (300x 250 x 7mm/450x350x7mm) set and joint in veticle surfaces walls over 10 mm thick plaster in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as spfd and directed.

M&L 10 mm thick rendering in CM 1:6 on brick/concrete surfaces including finishing the surfaces fair and even complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplasterd new decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of primer any tint of walls complete all as specified and directed.

M&L for Preparing surfaces, plastered or unplasterd new decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of wall putty and primer any tint of walls complete all as specified and directed.

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and directed.

Supply and fix Extruded aluminum alloy handle, fabricated type, anodized 125mm size, complete all as specified and directed.

Supply and fix Aluminum, anodized, barrel tower bolts of extruded section 200 mm long, complete all as specified and directed.

Supply and fix Mild steel butt hinges medium weight,cold rolled 100 mm in size complete all as specified and directed.

S/F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking down old pipe, complete all as spfd & directed.

Supply and fix in repair 15 mm bore bib taps, Chromium Plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified & directed.

S&F 15 mm Stop valves, fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.

Material and labour for Grating doom 100 mm dia with wash hole of PTMT in repair (Minimum weight 40 gms) complete all as specified and directed.

Supply and Fix PVC connections 15 mm size with PTMT nuts of length 600mm long all as specified and as directed.

Supply and fix vitreous china squatting pan "Orissa pattern" size 580 mm x 440 mm white with integral foot rests, incl provn of lime concrete bedding complete all as specified and directed.

S&F vitrous china wash down water closet pan (padestal pattern) white colour(excluding cistern), complete all as specified and directed.

Supply and Fix in repair 10 ltr capacity PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.

S&F in repair 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.

Supply and Fix in replacement lid with hinges on one side & locking facility on another side/ or with thread including covered with barbed wire for PVC drinking water service tank of capacity upto 2000ltrs complete all as specified and directed.

E/M Items :

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M & L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed conduit 20mm or higher dia, complete with all accessories /fitting and sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly including making good disturbed surfaces to same as previous existing complete all as specified for one light /fan /bell point controlled by one way switch of 5/6 Amps complete all as specified and directed.

ditto as per item No 38 above but for one 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps complete all as specified and directed.

ditto as per item No 38 above but for one 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps complete all as specified and directed.

M & L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in PVC concealed conduit not less than 20mm dia, in concealed type complete with all accessories / fitting and sunken terminal boxes, switch board of suitable size with 3 mm thick plastic laminated hard gloosy surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly including making good disturbed surfaces complete all as specified and directed.

S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed.

S&F switch piano flush button single pole two way 5/6 Amps complete all as specified and directed.

S&F bell push flush button single pole one way 5Amps complete all as specified and directed.

S&F switch piano flush button single pole one way 15Amps complete all as specified and directed.

S&F socket out let 3 pin 5/6 Amps flush type complete all as specified and directed.

S&F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified and directed.

S&F Ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.

S&F lamp holder PVC/poly carbonated type with back plate suitable for pendants /angular /batten fittings complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F in repair Bell multi music type complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 4 way 240 Volts, double door suitable for housing MCBs and isolators complete all as specified and directed.

S&F sheet metal enclosure for DB SPN 8 way with 200 Amp rated bus bar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified and directed.

S&F MCB SP 6-32 Amps, 240volts 10KA complete all as specified and directed.

S&F MCB SPN 32/40 Amps, 240volts 10KA complete all as specified and directed.

S&F MCB TPN 40/63 Amps, 240volts 10KA complete all as specified and directed.

M&L sub main wiring with 2 runs of 6 Sqmm and one runs of 6 Sqmm Copper cable multistranded drawn through existing surface /recessed steel/PVC conduit providing necessary clamp, screw, thimble and connected to MCB/DB box /main switches etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED lights fitting mirror type with high out put diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED bulb 12 watts, 220V complete all as specified and directed.

Taking down ceiling fan from existing position, dismantling, overhauling and cleaning throughly, oiling /greasing and re- assemble after replacing split pins, check nuts, rubber seal etc and rehanging at same or new locations duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.

Supply only Ball bearing for Ceiling fan after and including taking down old ball bearing complete all as reqd at site, complete all as specified and directed.

Supply only capacitor 2.5 mfd±5%, 440 Volt, AC, 50Hz after removing old defective condensor complete all as specified and directed.

Taking down exhaust fan of any size from existing position, dismantling, overhauling and cleaning throughly, oiling/greasing and re- assemble after replacing unsv parts etc and rehanging the same duly connected with new PVC three core flexible copper conductor cable of size 23/.0076, complete testing & specified. Note: Spare parts will be measured and paid separately under respective items as supply only as mentioned below.

M&L for taking out burnt copper winding from exhaust fan of any size/type and rewinding with existing /same guage of super enammeled copper wire complete all as specified and directed.

Supply only 200/250mm sweep PVC body exhaust fan motor complete all as specified and directed.

Supply only capacitor 1-1.5 mfd±5%, 440 VAC, 50Hz Suare shape suitable for PVC body exhaust fan 200/250mm sweep or suitable one after removing old defective capacitor complete in exhaust fan complete all as specified and directed.

Supply only capacitor 4 mfd±5%, 440 Volt, AC, 50Hz or suitable one after removing old defective capacitor complete in exhaust fan complete all as specified and directed.

Taking down flate-plate solar collector storage solar water heater of capacity upto 250ltr, dismantling pipe assembly, cleaning thoroughly with descaling liquid compound complete to ensure free and constant flow of water through outlet, repair of copper bracing for bonding of header and raiser making leak proof, repair & repalcement of back and side insulation material, rethreading of inlet/outlet pipe 20 mm dia, reassembling the same after replacing u/s items i.e. heating element, thermostete, toughned glass, connection pipe with clamp etc. at existing location including necessary fasteners to ensure proper safety as reqd at site, repair/welding of MS structure for collector stand, testing and commissioning after re-installation at site complete all as specified. Note: Spare parts (heating element, thermostete, toughned glass, connection pipe with clamp) will be measured and paid separately under respective items as supply only as mentioned below.

Supply only heating element of 3.0 KW for solar water heater (as per sample ISI brand) including taking down old heating element complete all as specified and directed.

Supply only thermostate for solar water heater complete all as specified and directed.

Supply only flate-plate collector having absorber plate with copper tubes, thermal insulation with glass wool, glazing with transparent cover to prevent heat loss and made with iron poor solar safety toughened glass, 4 mm thick with low iron, transmissivity upto 92% at near normal incidence glass as same as existing complete all as specified and directed.

Supply only SS heat exchanger / Hot water tank of cap 100 LPD with outer cladding & frames of SS/AL/GI complete all as specified and directed.

Supply only Heavy duty nylon threaded flexible PVC/CPVC connection pipe 25 mm dia suitable for both hot & cold watrer supply of solar water heater complete all as specified and directed.

Supply only GI/brass adjustable scew clamp as per sample complete all as specified and directed.

Supply, laying and testing GI pipe medium grade 15 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as specified and directed.

Supply, laying and testing GI pipe medium grade 20 mm, ISI marked, with all fittings and fixed complete to wall and ceiling or laid on floors complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and re-fixing the same at new or old locations by replacing worn out GI fittings complete all as specified. Note: GI fittings as required shall be measured and paid separately under respective items as supply only as mentioned below.

Supply only Elbow 15mm

Supply only Tee 15mm

Supply only Socket 15 mm

Supply only Union 15mm

Supply only Reducer Socket 20/15 mm

Supply only Tank nipple 20 mm

Supply only Nipple 15 mm

Supply only Elbow 20mm

Supply only Tee 20x20x15mm

Supply only Socket 20 mm

Supply only Union 20mm

Supply only Nipple 20 mm

Supply ony float valve of NB 15mm inside SS tank of solar water heater

Supply only Butterfly valve 15mm

S&F 20mmball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L sub main wiring with 2 run of 4 sqmm and one run of 4 sqmm Copper cable FRLS multistranded drawn in and including PVC conduit in surface/recessed providing necessary clamps, screws, thimbles and connected to MCB of solar water heater/DB box etc all as reqd at site, specified.

Note : Tenderers may note that amount of credit Rs 21,666.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

NOORI ELECTRIC ENGINEERING WORKS

SHAHJEE FRIDGE SERVICE