REPAIRS TO INTERNAL WIRING INCLUDING FITTINGS /FIXTURES, LT LINE AND LT PANEL AND SECURITY LIGHTS AT AIR FORCE AREA UNDER GE MISAMARI

Amount

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes, complete all as specified and directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Rigid PVC Concealed Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and directed.

All as per item No 4 but, for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator, complete all as specified and directed.

All as per item No 4 but, for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and directed.

All as per item No 4 but, for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed.

All as per item No 4 but, for one bell point controlled by one, bell switch 5 Amps, complete all as specified and directed.

All as per item No 4 but, for one light point controlled by one, two way switch 5 Amps, complete all as specified and directed.

All as per item No 4 but, using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and directed.

All as per item No 11 but, for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator, complete all as specified and directed.

All as per item No 11 but, for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and directed.

All as per item No 11 but, for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed.

All as per item No 11 but, for one bell point controlled by one, one way bell switch 5 Amps, complete all as specified and directed.

All as per item No 11 but, for one light point controlled by one, two way switch 5 Amps, complete all as specified and directed.

All as per item No 11 but, using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly, complete all as specified and directed.

M&L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Concealed Conduit ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.

M&L Submain wiring with 4 runs of single core 10 sqmm PVC insulated FRLSH unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC concealled conduit ISI marked and its accessories including One run of single core 10 sqmm PVC insulated FRLSH unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.

S&F switch piano (White) single pole flush type 5 amps, 230 volts, complete all as specified and directed.

Fixing only switch piano single pole flush type 5 amps, 230 volts obtained from item No 1 above complete all as specified and directed.

S&F in replacement switch piano (White) single pole flush type, two way, 5 amps, 230 volts, complete all as specified and directed.

S&F in replacement bell push (White) flush type 5 amps, 230 volts, complete all as specified and directed.

S&F in replacement socket (White) flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts, complete all as specified and directed.

Fixing only socket flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts obtained from item No 1 above complete all as specified and directed.

S&F in replacement switch socket combination (White) flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts, complete all as specified and directed.

Fixing only switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts obtained from item No 1 above complete all as specified and directed.

S&F in replacement switch socket combination (White) 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and directed.

S&F in replacement Switch (White)15 amps flush type, complete all as specified and directed.

S&F in replacement Socket (White) 15 amps flush type, complete all as specified and directed.

Fixing only switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type obtained from item No 1 above complete all as specified and directed.

S&F in replacement ceiling rose (White) three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and directed.

Fixing only ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm obtained from item No 1 above, complete all as specified and directed.

S&F in replacement ceiling fan regulator (White) step type, flush type heavy duty suitable to work on 230 volts Ac supply, complete all as specified and directed.

Fixing only ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply obtained from item No 1 above complete all as specified and directed.

S&F in replacement lamp holder (White) insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblocks, complete all as specified and directed.

Fixing only lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks obtained from item No 1 above, complete all as specified and directed.

S&F call bell suitable to work on 230 volts AC supply including removal of old unsv call bell, complete all as specified.

S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen, complete all as specified.

S&F LED colour temperature 2700 K (warm white) 12 W LAMP with B 22 base capacity 1200 lumen, complete all as specified and directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 volts double door with magnitic locking system complete including removal of old unsv sheet metal enclosure, complete all as specified and directed. Make : L&T/Schneider/Indo asian/Legrand.

S&F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure, complete all as specified and directed. Make : L&T/Schneider/Indo asian/Legrand.

S&F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps, complete all as specified and directed.

S&F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 40 Amps, complete all as specified and directed.

S&F MCB SP 6 to 32 Amps C-Series 240 volts for fixing on MCB DB's, complete all as specified and directed.

S&F sheet metal enclosure MCB VTPN 4 way Double door IP 43 Protection Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s earth bar/s sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. Make : L&T/Schneider/Indo asian/Legrand.

Supply and fixing for single pole and neutral enclosure with a two pin and earth plug and socket complete with on one single pole MCB 20 Amp, 240 volts, complete all as specified and directed.

S&F wall mounted LED 18 watts, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting for LED tube 4'' x 18 watts complete including dismantling the existing unserviceable fitting, complete all as specified and directed.

S&F wall mounted LED 18 watts, 4 feet, Batten slim type (Daylight 5000K) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fittingcomplete including dismantling the existing unserviceable fitting, complete all as specified and and directed.

S&F Ultra bright LED T8 Tubelight 18 watts (single side connection) with very high efficacy with built in driver with metal Heat sink suited for installation in existing tubelight G13 lamp holders to give glare free light with necessary wiring and removal old existing unsv tube from fitting including taking up/ down old unserviceable Tube, disconnecting Choke, Starter etc from the Light Fitting, complete all as specified and directed.

S&F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provosion of LED bulb 09/10 watts complete incl removal of old unsv fitting, complete all as specified and directed.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting, complete all as specified and directed.

S&F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete incl removal of old unsv fitting, complete all as specified and directed.

S&F ceiling fan capacitor 2.5 mfd/ 2 mfd/3.15 mfd as per site requirement heavy duty with metal body including removal old existing unsv one complete all as specified and directed.

Taking down the existing unservicable UG cable of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed. Note : Earthwork will be measured and paid seperately under relevant item.

Relaying Faulty LT UG XLPE cable of size 3.5 core x 35/50/70 sq mm laid in trenches/ floors/ on wall/ service connections after cutting and jointing through Cable Joint kit as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.

All as per Item No.56, but for cable size 25 Sqmm 4 core, complete all as specified and directed .

Supply & laying incl replacement of LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 95 Sqmm 3.5 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and directed. Note : Earthwork, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid separately under relevant items.

All as per Item No.58, but 70 Sqmm x 3.5 Core, Complete all as specified and directed.

All as per Item No.58, but 50 Sqmm x 3.5 Core, Complete all as specified and directed.

All as per Item No.58, but 35 Sqmm x 3.5 Core, Complete all as specified and directed.

All as per Item No.58, but 25 Sqmm x 3.5 Core, Complete all as specified and directed.

All as per Item No.58, but 16 Sqmm x 4 Core, Complete all as specified and directed.

All as per Item No.58, but 10 Sqmm x 2 Core, Complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable, complete all as specified and directed.

Returning, filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils, complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and laying well burnt Bricks, locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection, complete all as specified and directed.

Supply, spread and filling approved sand in cable trenches for cushioning of LT UG cable, complete all as specified and directed. Note : Punned thickness only will be measured and paid separately under relevant item.

Supply & lay GI tubing, 40 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed .

Supply & lay GI tubing, 50 mm dia bore, light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc, complete all as specified and directed .

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 10 Sqmm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm supension wire , twin core cable flat or circular cable incl taking down old unsv cable, complete all as specified and directed.

S&F Recess mounted Environmental friendly ,asthetically designed ,ultra modern 2X2 luminaire 28W with high brightness SMD LED as Light source,suitable for Armstrong /Grid ceiling , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including suitable LED Driver, ccomplete all as specified and directed. Make : Model No. PLUTO NEO PANEL 2X2 PLUTONEO2X2PLR28WLED840S of Havells or equivalent in Crompton/Surya.

S&F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 1.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed .

S&F 1100 volts grade PVC insulated stranded FRLSH Copper conductor Single core of 2.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed .

S&F 1100 volts grade PVC insulated stranded Flexible Copper conductor twin core of 1.5 Sqmm, incl taking down old unsv Conductor, complete all as specified and directed.

S&F PVC Square Box of Size 7'' x 4'' including replacement of old UNSV one, complete all as specified and directed.

S&F PVC Square Box of Size 8'' x 6'' including replacement of old UNSV one, complete all as specified and directed.

S&F PVC Square Box of Size 4'' x 4'' including replacement of old UNSV one, complete all as specified and directed.

Supply only PVC wide Insulation Tape, complete all as specified and directed.

S&F GI strip of size 25 x 3 mm buried in ground / fix with saddle and screws etc, for roof and on wall as earth continuity conductor, complete all as specified and as directed.

S&F Air Termination, single pointed copper rod 12 mm dia and 300 mm long complete fixed with brazing, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. Note : The rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 5.00 meter above ground level.

Dismantling unserviceable LT Poles of any description and any size including demolition of Cement Concrete (as/if required) and made good disturbed Ground complete all as specified and directed. Note : Unsv Poles will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

Dismantling Cross-Arms of Mild Steel Channel or Angle Sections, etc, including Mild Steel Bolts, Nuts, Washers, etc, complete all as specified and directed.

Dismantling Insulators like Pin type, Shackle type from existing Electric Poles of any description and any size, seggregating Seviceable Insulators and keep in safe custody for re-use, complete all as specified and directed.

Dismantling ACSR or AAC Conductors from the Disturbed Span including Line Spacer, etc, complete all as specified and directed.

Dismantling Earth Wire, Cradle Guarding etc, complete all as specified and as directed.

M&L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) for stay assembly, complete all as specified and as directed.

M&L Cement Concrete (1:3:6) type C2 ( using 40mm graded stone aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and directed.

M&L Cement Concrete (1:2:4) type B1 ( using 20mm graded stone aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and directed.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red oxide Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and directed. Note : Earthwork, Cement Concrete, etc. will be measured and paid separately under relevant items.

M&L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230 x 230 x 6 mm complete all as specified and as directed. Note : Earthwork, Cement Concrete, Mild Steel Stay Clamps with Bolts, Nuts, Stay Strand, Loop Insulator etc. will be measured and paid separately under relevant items.

Dismantling unserviceable stary assembly of LT Pole, complete all as specified and directed. Note : Unsv Stay assembly will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

M&L Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and directed.

Refixing only Cross-arms, Bracings, Supports, Clamps and Back Plates, including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

S&F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade, complete all as specified and directed.

Fixing only Insulator Pin type Porcelain, Vitreous including one Galvanised Mild Steel Spindle Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade, complete all as specified and directed.

S&F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 100mm height 115mm dia including Galvanised Mild Steel 31x5mm Strap, 14mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, complete all as specified and directed.

Fixing only Shackle type Porcelain, Vitreous of size 100mm height 115mm dia including Galvanised Mild Steel 31x5mm Strap, 14mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt grade, complete all as specified and directed.

S&F Loop Type Insulator Vitreous White, Brown or Green, large size with overall dimensions 90x65mm, clearance of hole 16mm dia, complete all as specified and as directed.

S&F Aluminium Conductor Steel Reinforced (ACSR) (sizes as required) with permissible Sags and providing Jumper, etc, fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc, complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the quoted rate.

Labour for Releasing ACSR Conductor of existing OH Lines by un-binding from Insulator of any description, re-fixing after stretching, re-stringing the Conductor, removing excess Sag, maintaining proper distance between Conductors as ordered, and binding to insulators with Aluminium Binding Wire, complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the quoted rate.

S&F Galvanised Steel Wire 3.15 or 4.0mm dia as Earth Continuity Conductor and fixed to Pole, binding with Aluminium Binding Wire, complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the quoted rate.

Labour for Releasing GI Wire of existing OH Lines by un-binding from Insulator of any description, re-fixing after stretching, re-stringing GI Wire, removing excess Sag, maintaining proper distance between Conductors as ordered, and binding to insulators with Aluminium Binding Wire, complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the quoted rate.

S&F PVC/ Fibre Separator for LT Lines 1100 Volts OH Conductor 2 Wire system for horizontal spacing of Conductor, fixing with Nuts, Bolts, Washers, etc, complete all as specified and as directed.

S&F PVC/ Fibre Separator for LT Lines 1100 Volts OH Conductor 4 Wire system for horizontal spacing of Conductor, fixing with Nuts, Bolts, Washers, etc, complete all as specified and as directed.

Laying/ Fixing only Galvanised Iron Pipe 50mm dia bore, as in protection of UG Cable, laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. Note : Cost of Mild Steel Clamp, Nuts, Bolts and painting is deemed to be included in the quoted rate.

All as per Item No.108 here-in-above, but GI Pipe of Size 40 mm dia, Complete all as specified and as directed.

All as per Item No.108 here-in-above, but GI Pipe of Size 80 mm dia, Complete all as specified and as directed.

M&L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Steel Tubular Poles of length 8.5/9.0 Metre (above the Planting Depth and PCC Copings) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying one Coat of Red Oxide Zinc Chrome Primer, alternate Yellow & Black Strips Painting (4 No. Each Strip 150 mm wide) and remaining portion of Pole and Cross Arms, Cable Protection Pipe, Brackets, etc. treated with two coats of aluminium paint, complete all as specified and as directed.

All as per Item No.111, but GI Pole of Size 11.00 Metre in length, Complete all as specified and as directed.

M&L preparing old painted surfaces by scraping and removing old paints, rust, etc. from Pre-stressed Concrete Pole of length 8.5/ 9.0 Metre (above the Planting Depth and PCC Copings) and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. and applying Two Coats of Synthetic Enamel Painting in alternate Yellow & Black Strips Painting (4 No. Each Strip 200 mm wide) and remaining portion of Pole treated with Two Coats of Exterior Weather Proof Paint and Mild Steel Cross Arms, Cable Protection Pipe, Brackets, etc. treated with Two Coats of Aluminium Paint, complete all as specified and as directed.

M&L Writing Letter on Steel Tubular/Pre-stressed Concrete Pole (8 Cm in height) with Synthetic Enamel Paint (White) on base of Black Paint in round shape of 15 Cm dia, complete all as specified and directed.

Trimming of Tree Branch, girth not exc. 50 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing trimmed Branches from Site(s) and stacking as directed, complete all as specified and directed.

Trimming of Tree Branch, girth exc. 50 mm but not exc. 100 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing trimmed Branches from sites and stacking as diredted, complete all as specified and directed.

Trimming of Tree Branch, girth exc. 100 mm but not exc. 150 mm around OH Electric Lines and cleaning upto 3.00 Metre from the OH Electric Lines, removing trimmed Branches from sites and stacking as directed, complete all as specified and directed.

Cutting unaxious green growth and wild grass by manual labour or by machine at Electrical Installation Premises, around Pole, along the boundary Fencing, removing rubbish from the Site of Work and deposting where directed not exc. 100 Metre from the starting Point, complete all as specified and as directed. Note : The Item shall be operated maximum 2 times in the entire period of the Contract and the measurement will be taken every time independently for payment.

S&F in replacement connecting and testing MCCB in existing LT Panel, suitable for 415 volts MCCB 4 Pole 630 Amps, thermal magnetic type DN3-630D with breaking capacity 50 KA with thermal magnetic release at 415 volts, including spreader terminal, complete all as specified and as directed. Make : Cat part No. CM93007OOOOAG of L&T or equivalent in Indo Asian/ Legrand.

S&F in replacement connecting and testing MCCB in existing LT Panel capacity, suitable for 415 volts MCCB 4 Pole 250 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, omplete all as specified and as directed. Make: Cat part No. CM92109OOP1OG of L&T or equivalent in Indo Asian/Legrand

S&F in replacement connecting and testing MCCB 4 Pole 200 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal, complete all as specified and as directed. Make : Cat part No. CM92109OON1OG of L&T or equivalent in Indo Asian/ Legrand

S&F in replacement connecting and testing MCCB 4 Pole 160 Amps, thermal magnetic type DN2-250D with breaking capacity 36 KA with thermal magnetic release at 415 volts,including spreader terminal, complete all as specified and as directed. Make : Cat part No. CM92109OON1OG of L&T or equivalent in Indo Asian/ Legrand

S&F in replacement connecting and testing MCCB 4 Pole 100 Amps, thermal magnetic type DN2-250D with breaking capacity 50 KA with thermal magnetic release at 415 volts, including spreader terminal, complete all as specified and as directed. Make : Cat part No. CM92108OOL1OG. of L&T or equivalent in Indo Asian/ Legrand

S&F in replacement connecting and testing MCCB 4 Pole 63 Amps, thermal magnetic type DZ1-160D with breaking capacity 50 KA with thermal magnetic release at 415 volts, including spreader terminal, complete all as specified and as directed. Make: Cat part No. DZ1F0063DXD1A of L&T or equivalent in Indo Asian/ Legrand

S&F in replacement LT digital Amp meter of size 96x96mm 0 to 200 Amp,Class 1, complete all as specified and directed. Make : L&T/Havells/ Indo Asian.

S&F in replacement LT digital volt meter of size 96x96mm 0 to 500 volts ,Class 1, complete all as specified and directed. Make : L&T/Havells/ Indo Asian.

S&F in replacement LT CTs of rating 200/5 Amp, complete all as specified and directed. Make : L&T/Havells/ Indo Asian.

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 25 sqmm 3.5 core to 50 sqmm 3.5 core, complete all as specified and directed.

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 70 sqmm 3.5 core to 95 sqmm 3.5 core,complete all as specified and directed.

Cutting out the burnt out cable end and reconnecting with providing new lugs,tapes etc for cable size 120 sqmm 3.5 core to 300 sqmm 3.5 core, complete all as specified and directed.

S&F in replacement of old unserviceable Four pole onload changeover switch with advanced neutral having current rating 200 Amp with phase barrier & handle with door interlock kit in Sheet Metal Enclosure complete all as specified and directed. Make : L&T/C&S/Havells.

Supply and fixing in replacement of old unserviceable Four pole onload changeover switch with advanced neutral having current rating 400 Amp with phase barrier & handle with door interlock kit in OPEN EXECUTION, complete all as specified and directed. Make : L&T/ C&S /Havells.

S&F two core Al Conductor 2.5 Sqmm for repair and replacement in panel / fixing of Street of repaired light complete all as specified and directed.

S&F Aluminium thimble for cable size of 300/400 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 95-120 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 70 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 50 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 35 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 25 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 16 Sqmm, complete all as specified and directed.

S&F Aluminium thimble for cable size of 10 Sqmm, complete all as specified and directed.

Replacement of old unsv rubber mat with the new rubber mat suitable for LT panel of size 2mx1mx15mm thick,ISI marked, complete all as specified and directed. Make : Deep Jyoti or equivalent make as approved by GE.

M&L straight through joint (epoxy type) including jointing kit complete for making joints suitable for UG aluminium conductor cable 3 ½ core of size 35 Sqmm to 50 Sqmm complete all as specified and directed.

M&L straight through joint (epoxy type) including jointing kit complete for making joints suitable for UG aluminium conductor cable 3 ½ core of size 70 Sqmm to 95 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised Iron strip of size 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised steel and GI Protection pipe light grade 40 mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC (1:3:6) type C2, excavation and earth work all as shown in electrical plate No 3 connected to earthing test point complete all as specified and directed or indicated including testing on completion. Note : The unit rate includes for protection pipe and GI strip from top of earth plate up to 5.00 meter above ground level.

S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws and run through wall provided with nonconducting plank etc.for down conductors for lighting arrester, complete all as specified and directed.

M&L Earthing complete with Copper earth plate electrode 60cm x 60cm x 3.15 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to Copper earth strip 20 x 3.15 mm thick drawn surrounded from all sides by mixture of charcoal and common salt alternately through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1 : 3 : 6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I, complete all as specified and directed. Note : Testing to be carried out after completion, if the earth resistance below 1 ohm is not obtained, earthing shall be renuated at no extra cost till the desired earth resistance is obtained.

S&F Copper strip of size 20 x 3.15 mm buried in ground / fix with saddle and screws etc. for roof and on wall as earth continuity conductor complete all as specified and as directed.

S&F Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw complete all as specified and as directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 Metre below the Road Surface) with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. Note : GI Pipe laid will be measured and paid separately under relevant Item.

Taking down unservicable high mast light fittings of any height/watt/make, repair the same in site by opening cover, replace the unsv parts such as LED Driver, lamps, holder, capacitor etc and unsv/burnt cable etc as required at site, after repairing fixing at same position complete all as specified and directed. Notes: (a) Parts required for replacement shall be measured and paid separately under relevant items. (b) Labour element for replacement of unserviceable parts will be deemed to be included in quoted rates.

M&L for taking down unserviceable Street/security/Flood Light Fitting of any Watt/Make, repairing the same by opening Cover, re-wiring the Light Fitting with 2.5 Sqmm Copper Conductor Cable, multi-stranded, replacing unserviceable Parts as required/ordered, re-fixing Light Fitting in Original Position after repaired and connecting up, complete all as specified and directed. Notes : (a) Spare Parts such as SPD/LED Driver, etc. wherever required will be measured and paid under relevant Item(s) as ‘Supply only’. (b) Labour Element for replacement of unserviceable Parts is deemed to be included in the quoted rates.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 60 watts with pre wired and necessary mounting arrangements with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 2.5 sq mm twin core aluminium conductor cable multi stranded from fitting to over head line including necessary GI pipe, medium grade, 32 mm dia 1.5 mtr long bend to required shape and taking down old unserviceable Street Light Fitting form Electric Pole of any description complete all as specified and directed. Make : Cat part No. TRP-409-60-57-SL-GL-NSG of Crompton or equivallent in havells/ Surya.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 45 watts with pre wired and necessary mounting arrangements and with lumen efficiency >= 110 LPW incl SPD 10KV provision of 2.5 sq mm twin core Aluminium conductor cable multi stranded from fitting to over head line including taking down old unserviceable Street Light Fitting form Electric Pole of any description complete all as specified and directed. Make : Cat part No. TRP-409-60-57-SL-GL-NSG of Crompton or equivallent in havells/ Surya

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with pre wired and necessary mounting arrangement with lumen efficiency >= 110 LPW incl SPD 10KV and provision of 4.00 sq mm three core flexable aluminium conductor cable multi stranded ,connected to existing points in Hanger beam angle of any description complete all as specified and directed. Make : Catpart No. LFLN-120-CDL/60-M of Crompton or equivalent in Havells/Surya.

Supply only Electronic LED Driver of Capacity 45 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic LED Driver of Capacity 60 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic LED Driver of Capacity 90 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic LED Driver of Capacity 100 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic LED Driver of Capacity 150 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic Surge Protection device (SPD) 10 KV suitable for LED Security light of Capacity 45 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic Surge Protection device (SPD) 10 KV suitable for LED Security light of Capacity 60 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only Electronic Surge Protection device (SPD) 10 KV suitable for LED Flood light of Capacity 90/100 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

Supply only of Electronic Surge Protection device (SPD) 10 KV suitable for LED Flood light of Capacity 150 Watt, suitable for 220/230/240 Volt, complete all as specified and directed.

M&L Street Light Fitting Bracket made out of GI pipe medium grade, 40 mm dia 1.5 mtr long bend to required shape and fixing to pole poles, walls etc., including supply and fixing of MS Clamp, nut-bolts as required duly painted with two coats of aluminium paint over a coat of red oxide primer, including taking down old unserviceable Street Light Fitting bracket, complete all as specified and directed.

S&F Outdoor Powder coated CPRI Approved Busbar Chamber 400A for reliable distribution of cables made out of CRCA sheet 3.15 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal with provision for 4 Nos of Copper Busbar with suitable clamps, nuts, bolts and mounted on iron frame, complete all as per following as specified and directed. (a) 400 Amps rated copper bus bar TPN of length 60 cm each duly insulated with coloured PVC sleeve as per standard colour code (b) Incommer, MCCB 4 Pole 250 Amps, thermal magnetic type DN3B-400D with breaking capacity 36 KA with thermal magnetic release at 415 volts, including spreader terminal. Make : Cat part No. CM92109OOP1OG of L&T and equivalent in legrand/Indo/ Asian/Havells. - (01 No) Notes : 1. The rates for PCC shall be measured and paid separately under relevant item. 2. Cost of Iron Frame included in quoted rate.

S&F LEDs aviation light energy saving new generation environmental friendly long life versatile presure die cast aluminium housing with polycarbonate enclosure with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193, complete all as specified and as directed. Make : Cat Part No-110731 of BAJAJ or equivalent in Havells/AS Solar.

Saraswati Auto Works

M/S S.S.Corporation

RC Madan

United Traders