Tender ID

CPPP

Technical Eval

Works

Electrical Works

Providing and fixing of street light poles at main gate simultala BSF campus under SHQ BSF Krishnanagar

DG,BSF,MHA

Simultala BSF campus | Nadia, West Bengal

Amount: Refer DocsCloses: 29 Apr 2026Closed

Timeline

Published24 Apr 2026
Closed29 Apr 2026
Technical Evaluation5 May 2026
Award—

Bids

1 Bid5 May 2026

#	Company	Status
1	ALOKA ENTERPRISE Accepted-Technical	Accepted-Technical DOCUMENTS CORRECT

Tender Value

Refer Docs

EMD Value

₹1,946

Closing Date

29 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

AC(ELECTRICAL)

Address

SHQ BSF Krishnanagar

Work Description

Providing and fixing of street light poles at main gate simultala BSF campus under SHQ BSF Krishnanagar

Tender Information

Tender ID

2026_BSF_906384_1

Reference Number

09/SHQ KNR/AE(E)/NIT/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

90 days

Location

Simultala BSF campus

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredAs per documents asked in NIT (.pdf)

Finance

RequiredAs per BOQ document (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1,946

Important Dates

Last Activity

5 May 2026

Published

24 Apr 2026

Bid Opening

30 Apr 2026

Download Starts

24 Apr 2026

Download Ends

29 Apr 2026

Submission Starts

24 Apr 2026

Clarification Period

24 Apr 2026 - 29 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.1INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (6 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surace/recessed conduit/submain wiring/cable as required.
2Supplying and embedding following dia G.I. pipe(medium class) in pole collar/foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.
2.1	40 mm dia	-	Mtr	-	-
3Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.
3.1	2 x 16 sq mm(22 mm)	-	Each	-	-
4Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.
4.1	63 mm dia (OD-63 mm & ID-51 mm nominal)	-	Mtr	-	-
5	Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%,Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K /5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (i) 50 Watt	2	Each	-	-
6Supplying and drawing 3 core x 1.5 sq. mm size FRLS PVC sheathed and insulated multi stranded copper conductor in the existing GI octogonal pole for making connection from SP MCB to LED street light fitting including testing etc as required.
7	Providing & fixing and erection of hot dip galvanized GI octogonal pole of length 5 mtr top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimensions 200 x 200 x 12 mm PCD 200 mm with 04 Nos foundation bolts of 450 mm length 16 mm dia with single arm standard bracket of 0.5 mtr length on the foundation made of cement concrete base 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 40 mm nominal size)including excavation and refilling etc as req as per direction of Engg-in-Charge.	2	Each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.78 MB

Work Item Documents

BOQ_952702.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ALOKA ENTERPRISE

Accepted-Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surace/recessed conduit/submain wiring/cable as required.
2Supplying and embedding following dia G.I. pipe(medium class) in pole collar/foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.
2.1	40 mm dia	-	Mtr	-	-
3Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.
3.1	2 x 16 sq mm(22 mm)	-	Each	-	-
4Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.
4.1	63 mm dia (OD-63 mm & ID-51 mm nominal)	-	Mtr	-	-
5	Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%,Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K /5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (i) 50 Watt	2	Each	-	-
6Supplying and drawing 3 core x 1.5 sq. mm size FRLS PVC sheathed and insulated multi stranded copper conductor in the existing GI octogonal pole for making connection from SP MCB to LED street light fitting including testing etc as required.
7	Providing & fixing and erection of hot dip galvanized GI octogonal pole of length 5 mtr top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimensions 200 x 200 x 12 mm PCD 200 mm with 04 Nos foundation bolts of 450 mm length 16 mm dia with single arm standard bracket of 0.5 mtr length on the foundation made of cement concrete base 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 40 mm nominal size)including excavation and refilling etc as req as per direction of Engg-in-Charge.	2	Each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surace/recessed conduit/submain wiring/cable as required.

2Supplying and embedding following dia G.I. pipe(medium class) in pole collar/foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

2.1

40 mm dia

Mtr

3Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

3.1

2 x 16 sq mm(22 mm)

Each

4Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required.

4.1

63 mm dia (OD-63 mm & ID-51 mm nominal)

Mtr

Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%,Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K /5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (i) 50 Watt

Each

6Supplying and drawing 3 core x 1.5 sq. mm size FRLS PVC sheathed and insulated multi stranded copper conductor in the existing GI octogonal pole for making connection from SP MCB to LED street light fitting including testing etc as required.

Providing & fixing and erection of hot dip galvanized GI octogonal pole of length 5 mtr top dia 70 mm, bottom dia 130 mm, sheet thickness 3 mm, base plate dimensions 200 x 200 x 12 mm PCD 200 mm with 04 Nos foundation bolts of 450 mm length 16 mm dia with single arm standard bracket of 0.5 mtr length on the foundation made of cement concrete base 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 40 mm nominal size)including excavation and refilling etc as req as per direction of Engg-in-Charge.

Each