Supply, Erection and Commissioning of 12M Height Mini Mast with 6Nos 84W All In One Solar LED lamp Fittings with automatic ON/OFF arrangements at vasantha nagar and Viswas Nagar junction in Ward No16.

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct-ed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Providing and laying in position, standardised concrete Mix M 20 Orade by iaitu machine mix concrete adopting weighing batch method in accordance with 18 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55 including admixture iplasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crashed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, jeuring, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc .complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). SI No. 158

Supply, Erection, Testing and Commissioning of 12M mini High mast with the following on turn key system with 6 Nos of 84W Solar LED light fittings. Supply, Erection and Commissioning of 12 M mini High mast system complete hot dip galvanized and suitable for 45 Met/s wind Celocity and above. The High mast structure should have head frame, whinch set, with steel wire rope of 4/5 MM dia, single drum and provided with galvanized lantern carriage suitable for 1 x 6 Nos Luminaries and control panel board system with Automatic Hoisting arrangements and wiring including 84W LED Solar light fittings and all labour charges etc as directed by the departmetal officers.(Excluding GST)

Supply and Fixing of 84W Solar LED Lamp with Inbuilt of Solar Panel , battery, Automatic ON/OFF Arrangments and Other Accessories With Suitable for above Solar LED Lamp. The Following Specifications detailed Below:- Luminaire Wattage : 84W Solar PV Module :25.6V 120W Panel Type:- Mono crystalline Battery Type :- (LifeP04) with Solar Charge Controller MPPT Efficiency >=90 % CRI > 70 Color Temperature 5700 K Luminous Efficacy > Minimum140 lumen / Watt Life Span > 50000 hours Sensor:- Microwave Charger Type :- MPPT (Built-in) and Open Ciruite protection, Short Circuite protection, Reverse polarity, Ingress protection IP65 Insulation Class- III IK for Lence :- IK08 Driver In Built DC- DC type, Body:-Aluminum Extruded Body As per standard specification , as directed by the departmental officers.(Excluding GST)