Construction of Custom Offices X-ray enclosure including allied works at Cargo Complex at Chandigarh International Airport. (SH Civil Works)

Amount

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (a) Electric resistance or induction butt welded tubes

Extra for providing MS sliding gates over and above BOQ item no.1 including all the accessories, wheels, hinges etc. required for smooth movement and operationalisation of sliding doors. (MS Section in sliding doors and its fixing arrangement will be measured for this item).

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a) Two or more coats on new work

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :- (a) For fixed Portion (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :- (a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) (i) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. (a) Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing aluminium handles, having Powder coated minimum thickness 50 micron aluminium to required colour or shade, with necessary SS screws etc. complete;- (a) 200 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, Powder coated minimum thickness 50 micron aluminium to required colour and shade, with necessary screws etc. complete. (a) Single Rubber Stopper

Providing and fixing aluminium tower bolts, ISI marked, Powder coated minimum thickness 50 micron aluminium to required colour or shade, with necessary screws etc. complete (a) 200x10 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality (make Link/Godrej/Harrison) with necessary screws etc. complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. (a) 12 x 160 mm

Providing and Fixing Rubber Rectangular Dock Bumper of size 450mm X 250mm X 100mm made up of fiber reinforced Prime Rubber containing nylon and Polyester complete as per Direction and satisfaction of EIC.

Providing & Fixing PVC 1 mm thick AC Curtains in strips along with rod and fixing arrangement complete as per site requirement and as per direction & satisfation of Engineer-in-charge

Providing and fixing polycarbonate multiwall sheet 5 - 6 mm thick (Both side U.V. coated) of approved make on the existing frame work of roof upto 4 mtr height including fixing on existing M.S. frame work with necessary screws and fasteners etc complete as per direction and satisfaction of Engineer-in-charge. (cost of M.S tube will be paid for seperately if required). The above item includes necessary fixtures and scaffolding etc. required for the installation. Note: For payment purpose only finished sqm area will be measured. Nothing extra will be paid.

Providing and fixing homogenous polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent including minor levelling, grinding, repairing of existing concrete surface and there after rolling with light wooden roller weighing about 5 kg all complete as directed by the Engineer-in-charge, in approved color and shade. (a) 2.00 mm thick sheet

S S BUILDERS