Improvements to Road

Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3 for the A-B Road to Maniga.

Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3 for the PH Road to Jonaga(via) Narayanaguda.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work. for the A-B Road to Maniga.

Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work for the PH Road to Jonaga(via) Narayanaguda.

Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-charge. for the A-B Road to Maniga.

Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion pressure distributor on prepared surface of granular base including clearing of road surface and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and as directed by the Engineer-in-charge.for the PH Road to Jonaga(via) Narayanaguda.

Providing and applying tack coat with bitumen Emulsion (VG-10) (Bulk) using Emulsion pressure distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge. for the A-B Road to Maniga.

Providing and applying tack coat with bitumen Emulsion (VG-10) (Bulk) using Emulsion pressure distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with primer cleaned with mechanical broom for finished item of work as per MoRT&H Specification 503 (5th revision) and as directed by the Engineer-in-Charge. PH Road to Jonaga(via) Narayanaguda.

Providing and applying Tack coat with Bitumen (VG-10) (Bulk) using Bitumen pressure distributor @ 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom, etc., complete for finished item of work as per MoRT&H Specification 503 (5th revision) for the A-B Road to Maniga.

Providing and applying Tack coat with Bitumen (VG-10) (Bulk) using Bitumen pressure distributor @ 0.20 kgs per sqm on the prepared bituminous/granular surface cleaned with mechanical broom, etc., complete for finished item of work as per MoRT&H Specification 503 (5th revision) for the PH Road to Jonaga(via) Narayanaguda.

Providing and laying of Bituminous Concrete with 100 - 120 TPH batch type hot mix plant/40-60 TPH mix plant using HBG crushed aggregates of Grading -II as per Table 500-17 of Spacification 507 of MoRT&H (5th Rivision), premixed with bituminous binder of VG 30 grade as per job mix formula with a minimum of 5.4 % of mass of mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction, etc., as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer - in - Charge. for the A-B Road to Maniga.

Providing and laying of Bituminous Concrete with 100 - 120 TPH batch type hot mix plant/40-60 TPH mix plant using HBG crushed aggregates of Grading -II as per Table 500-17 of Spacification 507 of MoRT&H (5th Rivision), premixed with bituminous binder of VG 30 grade as per job mix formula with a minimum of 5.4 % of mass of mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction, etc., as per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by Engineer - in - Charge.for the PH Road to Jonaga(via) Narayanaguda.

Forming shoulders with borrowed useful seclected earth having MDD of not less than 1.75 gms/cc from outside road boundary by mechnical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2 of MORT&H including all hire and operational charges of T&P , complete for finished item of work as per MORT&H specification 305 (5th revision). for the A-B Road to Maniga.

Forming shoulders with borrowed useful seclected earth having MDD of not less than 1.75 gms/cc from outside road boundary by mechnical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2 of MORT&H including all hire and operational charges of T&P , complete for finished item of work as per MORT&H specification 305 (5th revision). for the PH Road to Jonaga(via) Narayanaguda.

Providing B.T. patch work for pot holes using 40 to 45mm HBG metal with required quantity of 10 to 12mm size HBG key chips and 42 Kgs of 80/100 grade bitumen per one cum of work for filling the pot holes including removal of loose material in the pot holes trimming the edges to provide form vertical faces cleaning applying tack coat filling the pot holes compacting and finishing including cost and conveyance of materials, T&P charges and all labour charges for all operations etc., complete for finished item of work as directed by the Engineer-in-charge in the following reaches.for the PH Road to Jonaga(via) Narayanaguda.

Providing B.T. patch work for pot holes using 20 mm HBG machine crushed metal with required quantity of 10 to 12mm size HBG key chips and 80/100 grade bitumen at 72 Kgs / 1 cum of work for filling the pot holes including removal of loose material in the pot holes, trimming the edges to provide form vertical faces, cleaning, applying tack coat, filling the pot holes compacting with power Road roller of 8 to 10 T and finishing including cost and conveyance of materials T&P charges and all labour charges for all operations etc., complete for finished item of work as directed by the Engineer-in-charge in the following reaches. for the PH Road to Jonaga(via) Narayanaguda.