Loading…
Loading…
Tender Value
₹31.3 Cr
EMD Value
₹31.3 L
Closing Date
21 Apr 2026, 6:00 pmClosed
Executive Engineer, Water Works Department.
Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP Bhavnagar including2-month trial run and 2 Years O &M.
291905
TENDER /WW/32/MARCH/2026
Open
Civil Works - Water Works
Bhavnagar
5 documents required · 3 mandatory · 2 optional
₹18,000
Commissioner, Municipal Corporation, Bhavnagar
₹31.3 L
31 Mar 2026
31 Mar 2026
31 Mar 2026
21 Apr 2026
31 Mar 2026
Online Downloading of Technical Bid & Price Bid As per Details Tender Notice
As per Details Tender Notice
Pre – Bid Conference
Last Date of Online Submission of Technical Bid As per Details Tender Notice
Last Date for Physical Submission of Tender Fee, As per Details Tender Notice
EMD and other Documents
Online Opening of the Technical Bid As per Details Tender Notice
INFINITE CIVIL SOLUTION PVT. City Engineer,
LTD. Bhavnagar Municipal Corporation.,
INFINITE HOUSE F.P.-25 Sir Mangalsinhji Road,
Nr. Aditya Elegance & Railway Track, Bhavnagar- 364
CIMS Hospital Road, Sola, Fax: -0278-2428628
Ahmedabad - 380 060. E-mail: [email protected]
Email : [email protected]
Web site : www.inficivil.com
Volume-IV, Price Bid
Bid Documents for
Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP
Bhavnagar including 2-month trial run and 2 Years O &M with 5 year defect liability.
D Schedule of Payment
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
1. Name of work: "Title as mentioned in Notice Inviting Tender"
2. The bidder shall quote his firm and fixed price for the entire work under this
Contract, defined in more details in various sections of this bid document.
3. The rates and prices shall be submitted in the electronic formats given by n-procure
4. which is called Schedule-B, rates and prices received in any other formats will be
rejected and the bids will be disqualified.
percentage of the entire project.
Schedule-B only will be considered for comparison and evaluation.
9. Wherever for a particular item the quantities have been specified in schedule B and
payment shall be done as per percentage quoted by contractor.
10. Payment shall be made as per percentage rate of quoted by contactor which is
above of below.
satisfactory working/safety of the system as specified, will not be separately paid for
by the Employer when executed and shall be deemed to be already covered by
other items and rates listed in the price sheets No extra payment shall be given for
any item which is required to complete and perform the project.
pendency of the Contract. In case of any discrepancy noted in the various price
schedules, those in Schedule B will be considered and binding on the Contractor.
any will be considered for financial evaluation of the bid.
14. Schedule-D gives the basis of interim payment for construction of civil works.
15. The bidder shall be deemed to have allowed in his price for provision, maintenance
and final removal of all temporary works of whatsoever nature required for
construction including temporary bunds, diverting water, pumping, de-watering etc.
for the proper execution of works. The rates shall also be deemed to include any
works and setting out that may be required to be carried out for laying out of all the
works involved.
16. Prices shall be filled online only.
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
the Specifications and other sections of these bid documents and these documents
are to be taken as mutually explanatory of one another.
18. The bidder shall interpret the data furnished and carry out any additional survey
work, or investigation work required at his own cost.
19. The prices quoted shall also include the cost of materials utilized for testing.
20. The bidder should acquaint himself with the site conditions including the access to
Work site. The successful bidder shall have to make suitable access to work sites at
his own cost. These accesses will be used by the other contractors working for
BHAVNAGAR MUNCIPAL CORPORATION.
prices shall include all the equipments / materials / accessories and services
22. The amount to be quoted for Defect Liability shall be as per Volume-II, General
Conditions of Contract, Clause No. 1 "Security Deposit".
23. 1% of the value of work will be deducted from the Running bill against labour cess,
which shall be non refundable.ss
24. The prices shall be quoted inclusive of all taxes (excluding GST), royalties and
duties prevailing at the time of submission of the bids. Statutory variation if any
during the currency of contract shall have to borne by the agency which shall be not
reimbursed by the BHAVNAGAR MUNCIPAL CORPORATION. GST shall be paid
25. The rates should be quoted inclusive of all taxes (excluding GST) as per Volume-II,
General Conditions of Contract, Clause.
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
B. BID FORM (WITH PRICE)
Bidders are required to fill up all the blank spaces in this Bid Form.
The Municipal Commissioner
Bhavnagar Municipal Corporation
SUB : “Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP
Bhavnagar including 2-month trial run and 2 Years O &M with 5 years defect liability.”
1. Having visited the site and examined the Bid Documents, Drawings, Conditions of Contract,
including Addenda / Amendments to the above, for the execution of the above Contract, we
the undersigned offer to Design, Engineer, Procure, Construct, Complete, Commission of
the whole of the said works for 60(Sixty) Months from the date of commissioning including
defects liability period as given in Conditions of Contract and in conformity with the
Schedules, Annexure, Bidding Documents, including Addenda
Nos.____________________ (insert numbers) for Lump sum fixed price of
______________________________________) for Construction or such other sum as
may be ascertained in accordance with the conditions.
2. I / We agree that;
(a) If we fail to provide required facilities to the Employer’s representative or any other
person / Agency by the Employer to perform on his behalf for carrying out the
inspection and testing of materials and workmanship.
(b) If we incorporate into the Works, materials before they are tested and approved by the
Engineer’s representative
(c) If we fail to deliver pure water of required quantity according to the conditions /
stipulations of the Contract, the Engineer will be at liberty to take any action including
termination of Contract and impose at his absolute discretion any penalties, and / or
reject the work.
3. We undertake, if our Bid is accepted, to complete and deliver the works in accordance with
the Contract within 21 Months, excluding of monsoons, from the date or receipt of Letter of
Acceptance issued to us by you.
4. We agree to abide by this Bid for a period of 180 days from the last date of submission of
bid and it shall remain binding upon us and may be accepted at any time before the expiry
of that period.
5. In the event of our Bid being accepted, we agree to enter into a formal Contract Agreement
with you incorporating the conditions of Contract there to annexed but until such agreement
is prepared this Bid together with your written acceptance thereof shall constitute a binding
Contract between us.
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
6. We agree, if our Bid is accepted, to furnish performance Security in the forms and of value
specified in the General Conditions of Contract.
7. We have independently considered the amounts of liquidated damages shown in Appendix
to Bid and agree that they represent a fair estimate of the damages likely to be suffered by
you in the event of the work not being completed by us in time.
8. We understand that you are not bound to accept the lowest or any bid you may receive.
(Name of the person)
(In the capacity of)
Duly authorized to sign Bid for and on behalf of
(Fill in block capitals)
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
1. As mentioned in the Conditions of contract, the Contract being a percentage rate, the provision
of measurement will be applicable only for the assessment of value of work done for inclusion
in any interim certificate for part payment to the Contractor.
2. The Schedule specifies the procedure for all such assessment of the items specified in
3. Each item of Schedule-B has been divided into broad components. The Employer's
Representative shall assess the value of each component as indicated in paragraph 6 herein
4. Percentage Rate are indicated against each component of each items specified in Schedule B,
based on the Employer's best appreciation of the value of the component as related to the total
costs of the concerned item as whole. A head titled (any other item(s)) is included in each
breakdown of schedule and the tenderer shall at the time of tendering indicate any additional
items which he considers necessary but cannot be covered by any of the heads indicated in
5. The percentage breakup as indicated in the Schedule may differ from that corresponding to the
tenderer’s scheme and design and he should take this into account while quoting his lump sum
prices for the items specified in Schedule-B.
6. The contractor shall, after approval of his detailed designs and drawings furnish to the
Employer's Representative an initial bill of quantities to all major items, to be reviewed and
updated periodically with the Employer's Representative. This bill of quantities will be used for
assessment of percentage progress of the component at any stage. By measurement jointly
taken by the Employer's Representative and the Contractor, mutually agreed and entered in
the measurement books in the form and by the method approved by the Employer's
Representative, and signed jointly by both the parties.
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
D. SCHEDULE-D PAYMENT-SCHEDULE
BREAK UP FOR INTERIM PAYMENTS
(CIVIL, MECHANICAL, INSTRUMENTATION & ELECTRICALWORKS)
Item Description of Items Percentage Payment to be
1. RCC work (excluding M:10)
i After 7 Days of Construction (RCC Work) 70% of Quoted Rate
ii After 28 days Test reports. 25% of Quoted Rate
iii After EIC Approvals. 5% of Quoted Rate
2. Railing (Only Steel weight)
i For Fabrication work 60%
ii Installation of frame 25%
iii Finishing of welding 10%
iv Proper geometry, Line and level 5%
3. Electro – Mechanical component
i On supply of inspect and accepted major material at 75%
site such as pump motor, transformer, panel, valves
ii Erection – installation 15%
iii Trial testing, commissioning of the machinery 5%
iv After commissioning 5%
4. DI Pipe (all Type
i On supply of Pipe on site 65%
ii On laying and jointing 25%
iii Trial testing, commissioning 5%
iv After commissioning 5%
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Volume-IV, Price Bid
Schedule Amount
Item Description
Schedule B1-Raw Water Sump 31 14 12
Schedule B2-O&M 20 76
4 Net amount considering rebate (2+3)
Total Amount in Figures Rs. __ 31 34 88 000.00+GST___________________________
Total Amount in Figures Rs. __ 31 34 88 000.00+GST___________________________
1 The quantity mentioned in BOQ are tentative and provided for guidance purpose
only. Bidder shall conduct necessary Survey and Investigation and quote the rate
accordingly. No extra payment shall be given for any item which is required for
successful completion and commissioning of the project.
2 Items not specifically listed above but required to be executed for satisfactory
working/safety of the system as specified, will not be separately paid for by the
Employer when executed and shall be deemed to be already covered by bidder. No
extra payment shall be given for any item which is required to complete and perform
3 For the vendor follow the BMC approved vender list.
4 The BOQ is attached below with estimated rate.
5 The Concrete Shall be supplying form RMC plant compulsory.
6 The Reinforced steel should be provided as Fe-500 CRS steel as per BMC Vendor
7 L1 Bidder should provide work bar chart after receiving of LOA.
Bhavnagar Municipal Corporation Infinite Civil Solutions Pvt. Ltd.
Recapitulation sheet
Name of work - Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP
SR.NO Schedule Amount
1 Schedule B1-Raw Water Sump 31 14 12
5 Schedule B6-O&M Work of 2 Years 20 76
Grand Total 31 34 88
Grand Total 31 34 88
Infinite civil solution Pvt. Ltd.
Name of work - Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP Bhavnagar
Schedule B1-Raw Water Sump
Item Description Qty. Unit Rate Amount `.
Earth work excavation for foundation & depositing with an initial lead
of 50m & lift upto required depth in all sort of soils and soft murrum,
hard murrum, boulders including macadam roads, soft rock, masonry
in CM or LM or Lime concrete, Hard rock with blasting and chiseling or
1 by chielling only for finishing including dewatering of water as and Cmt.
when required, barricading with safety lamps etc. all complete as per
standard specification as directed by the EIC / approved drawing.
1.1 0 m to 1.5m A.) All type of soil 14172.00 Cmt. 194.54
1.2 1.5m to 3.0m A.) All type of soil 13900.00 Cmt. 210.41
1.3 3.0m To 5.0M A) All Type of soil 13100.00 Cmt. 225.46
Boring holes 4.0 m deep in ordinary soil (for cast in situ piles) and
getting out the soil and disposal of the surplus excavated soil as
directed within a lead of 50 Meter for following diameter of pipes.(iii)
Filling available excavated earth (excluding rock Black Cotton soil) in
trenches. plinth, sides of foundations etc. in layers not exceeding
cm. in depth consolidating each disposited layer by ramming and
Providing, Supply, and laying of Lime for Soil Stabilisation including
Preparation and leveling of ground, hydrateing spreading or injecting
of lime layer and compation etc. as per site condition and
requirements including traspotrtion and fright chaerges.
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to
prop. 1:2:4) (proportions as per mix design or as per Table 9 of 1IS456
2000 in masses by weigh batching ) using granite, quartzite trap metal
of size 6 mm to 20 mm for RCC work, including scaffolding centering,
5 form work, needle vibrated consolidation, curing comp. up to 6 meter 1357 Cmt. 5245.00
depth or height (excluding cost of reinforcement and neat finishing)
with centering and shuttering/deshuttering etc. comp. for structure
for other than water retaining . with form work
Providing RMC concrete of M-35 grade as per IS: 456 :2000, IS:10262 :
1982 and SP:23 and tender specification (incl plasticizer if needed) in
all items with smooth finishing incl. cost of form work and excluding
cost of reinforcement
M35 RCC Controlled concrete for sump
i) For bottom raft 7849.19 Cmt. 8213.00
ii) wall 1966.00 Cmt. 8083.00
iv) For beams 510 Cmt. 8486.00
v) Top Slab 1262.00 Cmt. 8213.00
vi) Column 795.00 Cmt. 9317.00
vii) Staircase 18.00 Cmt. 8083.00
Conveying, cleaning, straightening, cutting,bending, placing in
position, binding with M.S. binding wires including providing concrete
cover blocks, CRS-500 bars conforming to IS 1786 (latest revision) and
7 mild steel reinforcement (yield strength 2600 kg/cm2) confirming to 1589.00 MT 78577.00
IS:226 for various concrete members including freight,
loading,unloading and labour work etc. complete For ESR of brand as
per Vendor list.
Infinite Civil Solution Pvt. Ltd.
Providing and applying 20 mm thick waterproofing cement plaster
in cement mortar 1:2 with neat cement slurry finish with approved
8 water proofing compound in specified proportion inside of container 22185.00 Sqm. 202.00
at any height proportion as per specification including scaffolding,
curing etc. complete as directed.
Providing and applying asphalt painting on inner Surface of with
9 mechanical spreayer using bitumen VG -30 at the rate of 5.00 kg/10 6208 Sqm. 30.00
Providing and applying Epoxy paint of approved make to concrete
surface for RCC ESR of GSR or any other structure including cleaning
the surface by scrapping and air blowers to the satisfaction of
10 Engineer-in-charge necessary scaffolding etc. complete with all leads 22185.00 Sqm. 90.00
and lifts and giving satisfactory hydraulic test for water tightnessas
per IS codes. For new surface - Two coats
Providing and applying 3 coats of acrylic emulsion paint (Weather
Coat) to the exterior surfaces, Apex of Asian Paints or other
equivalent of approved make and shade as per Manufacturer's
11 instructions and specifications including Scaffolding, cleaning of 612.00 Sqm. 79.00
surfaces, labour, etc. complete to the external surface of tank, beams
&column at any level as directed. Samples shall be got approved
before actual execution of work..
Providing and fixing in position CI cowl air ventilators including fixing
12 of air filter and jali etc. complete (weight 40 Kg. approx.) dia 150mm 200.00 Nos. 2576.00
Providing and fixing Fiber reinforced seat and cover in line and level in
C.C. 1:2:4 and finishing Smooth etc. complete as directed. Fiber
reinforced Seat and cover Medium duty.(For Manhole at top slab)
Ultrasonic Level Transmitter : Range 0-10 mt Ultrasonic Type Level
Transmitter with Remote Display : Design, Supply, Installation, Testing
and Commissioning of NOn Contact Ultrasonic Type Level Transmitter
with Remote Display, Sensor:The sensor should be non contact type,
field mounting type, housing shall have minimum IP65 protection, PP/
PVC Sensor MOC, with sensor to transmitter cable. Remote Indicator
cum Transmitter: Microprocessor based indicator with LED / LCD
digital display,panel/ wall mounting type, power supply shall be 110-
240 Vac or 15 to 36 Vdc, 50 Hz ± 10 %. Accesories: Mounting bracket,
nut, bolts etc as per system requirement and Hook up diagram of the
Instruments. Level Transmitter shall be suitable for following Range.
providing and fixing water level indicator or depth guage painted TW
plank 25 mm /Ms 4 mm thick float level indicator sliding wire on
15 standarad pullies including necessary arragment to prevent swimming 2.00 Nos. 5520.00
etc. complete with calibration up to 6 mtr height
LED letters for capacity of reservoir with size of letters 45 cm. height
and 50 mm width etc. On top of ESR, in front of ESR.
Providing & laying cement concrete 1:3:6 (1 cement, 3 sand, 6 coarse
aggregate) as per IS:456:2000 and curing complete including cost of
17 formwork for foundation and 275.00 Cmt. 3972.00
Providing and fixing 25 mm dia. M.S. railing with three horizontal rows
of pipes and posts of angle iron of size 65 mm x 65 mm x 8 mm RCC
18 150 mm and 1.15 m. height and placed at 1.85 m C/C including two 6522 Kg. 77.00
coats of oil paint and anchorage in C.C. etc. complete.
Infinite Civil Solution Pvt. Ltd.
Providing Aluminium pole ladder made from channel size 44 mm x
mm x 3 mm and step made from non sleep corrugated aluminium
19 pipe 25 mm dia.complete with rubber shoes at top and bottom 18.00 Rmt. 992.00
available in aluminium for any height.
Conveying, carting and removing of the surplus excavated stuff from
site to lead stated below as directed by the Engineer-in-charge
20 including loading, unloading, carting, dumping or spreading etc. 30872.00 Cmt. 80.70
complete Upto 10.0 km
Construction of Valve Chamber by doing excavation, refilling the
excavated stuff providing PCC (1:3:6), Brick Work in CM(1:5) using fly
ash, RCC (1:1.5:3), TMT Fe 415, 10 mm thick plaster in CM 1:3,
21 providing CI steps and FRC manhole frame and cover i) 2000 mm x 6.00 Nos. 53330.00
2000 mm x 2000 mm for flow meter
Providing and installing copper lighting conductor system with
22 necessary fixtures, material etc. complete as required and as directed. 15.00 Nos. 878.00
Lightening Arrestor
Providing and fixing flanged D.I. D.F. K-9 grade pipes vertically ESR /
WTP Connecteting including providing clamps at every 3 mt including
jointing materials such as nuts,bolts,rubber packing,hydraulic testing
and necessary scaffolding etc. complete 400mm dia
Providing and supplying D.I. K-9 grade pipes for following nominal
bore diameter with internal cement mortar lining including all taxes,
insurance, transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to departmental stores, stacking etc.
complete. (IS 8329-2000). Rate for DI pipe based on Wholesale Price
index of Pig Iron as 124.6 for the month of Feb-2021. For sewerage
project cement mortor lining shall be with sulphate resistance cement
Manufacture, supply and delivery and fixing of ductile iron flange
ended specials complete as per IS : 8329-1994- or its latest revision if
25 any, suitable for D. I. pipe for various diameter and classes. The rate
includes taxes, loading, carting, unloading, stacking, insurance, Octroi,
inspection charges etc. complete.
a) duck foot bend
b) Cripling flange
Sluice Valve Providing and suppliying ISI mark CIDF Sluice valve of
following class and diameter including of all taxes , Insurance
26 Transportation, Fright charges , Octroie , Inspection charges, Loading,
Unloading , Conveynce to departmental stores, stacking , etc.complete
Sluice Valve (400 mm dia) (PN-1.6 gear operated pd
type short body)
Sluice Valve (600 mm dia) (PN-1.6 with hand wheel/
cap operated pd type short body)
Flowmeter:- Design, Supply, installation, testing and commissioning of
full bore electromagnetic flow meter with factory calibration, Inbuilt
power operated, flanged connection, flow sensor, Indicator,
Transmitter and totaliser with all accessories viz. surge arrestor, 7.00 no 278633.00
associated cables ,cabinetsm hardware, etc complete as per following
specifications. Size 400 mm Nominal Bore
Infinite Civil Solution Pvt. Ltd.
1). Flow meter/sensor:
DC pulsed type, IP 68 Protection, Flanged process connection as per IS 1538 or
equivalent standard, SS304/ Metallic Alloy Flow Tube, SS316/ SS 316 L/ Hastelloy
Sensor, SS316/ Hastelloy Grounding Ring/ Inbuilt Grounding Electrode,
Neoprene/Polyurethane/ Hard Rubber/ Rilsan lining, SS304/ Die Cast Aluminium/
Carbon steel with Anticorrosive Paint Coil Housing with Junction Box, CS flanges.
2). Flow Transmitter/Converter (Remote Field Mounted): Microprocessor based,
Modular design, 2 line LCD for indication of actual flow rate, forward, reverse, sum
totaliser display ±0.5% accuracy at 0.3 to 4 m/sec velocity, one scalable pulse/ one
status, one Modbus output, one GPRS/ GSM output, IP 67 protection, Die cast
aluminium/ polycarbonate/ SS316 with Anticorrosive Paint/ PU finish with glass
window enclosure, Inbuilt EEPROM and Data Logger, 20 meters cable length for sensor
to transmitter communication, Minimum 5 years battery lifetime, 3.6 VDC Non
Rechargeable Lithium-thionyl chloride/ Ni-Cd high power batteries, Hourly Basis
Worldwide transmission of measured data and events via e-mail and SMS by integrated
GSM/GPRS modem, Reliable data storage facility through integrated SD card etc
alongwith wall mounted/ stand mounted cabinet.
Full Bore Electomagnetic Flow Meter( Inbuilt Battery
Power Operated) -PN
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking
concrete block 80mm thick with grade of concrete M300 pnumatic
compressed / vibrated mechanically and as per approved design
Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line and level as per guidlines
of IRC : SP 63-2018 etc. Complete.
Providing And fixing Vertical MS Post and Pipe guard rail as per
29 detailed Drawing Including 3 coats of oil painting tow steel works 60.00 Rmt. 1089.00
etc.complete as directed.
Providing fixing new pre-cast concrete kerb stone of gray cement
based concrete block 30cm length,30cm height and 15cm thick of
30 M250 grade concret as per approved design and including excavation 500.00 Nos. 209.00
for fixing in proper line and level,filling the joint with C:M 1:3
(1cement: 3fine sand) ,1 coat primer and 2 coat paint etc complete.
Supplying & fixing big size (upto 10ft ) decorative trees including tree
gaurd As Directed By EIC..
Mud Pump, Max Flow Rate: 5.1LPS, 15mtr head with required pipe
incoming and outgoing, cable, starter and panel board
Pumps & Machineries 12V Self Priming & Automatic High Pressure
33 Washer with Adjustable Spray Gun Power Jet Wash Cleaner Pump 2 No. 4240.00
Rubble Soling: Providing, Supply, and laying of hard stones stable base
to the foundation and footing including Surface cleaning, Leveling and
compaction, Laying stones, Void filling, Hammering, Compaction etc
including trasportation charges.
Providing & Casting in situ C.C. in grade M20 (proportions as per mix design or
as per table 9 of IS 456-2000 in massess by weigh batching) using black trap
35 6 mm to 20 mm for RCC work, including scaffolding, centering, formwork, 322.00 Cmt. 6722.00
needle vibrated consolidation, curing, etc. complete (excluding cost of
reinformcement and finishing) with centering & shuttering etc. complete for
non-water retaining structures
Brick masonary in cement mortar 1:5 using common burnt clay building bricks
having crushing strenght not less than 35 kg/cm2 including scafolding ,curing
etc complete for walls parapates, etc at all levels and for soakpit and septic tank
Providing half brick masonry in common burnt clay building bricks having
crushing strength not less than 35 kg/cm2 in cement mortar 1:4 for partition
work including breaking out joints, curing, scaffolding, etc. complete as
directed for any height
Wall painting (2 coats+primer coat) with Exterior Apex Paint of approved
brand and manufacture on undecorated wall surface to give an even shade
including thoroughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
Infinite Civil Solution Pvt. Ltd.
Distempering (two coats) with oil bound distemper of approved brand and
manufacture and or required shade on undecorated wall surfaces to give an
even shade, over and including a priming coat with distemper primer of
approved brand and manufacturer after thoroughly brushing the surface
free from mortar dropping and other foreign matter also including preparing
the surface even and sand papered smooth.
Providing & Applying 2 coats Birla wall care putty of approved equivalent
make putty for smooth finishing of wall with necessary Admixture req.etc
the rate shall also include surface Preparing to make proper line & level etc.
complete as directed by engineer in charge.
Providing and laying polished Kota stone slab flooring over
20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse
41 sand) laid over and jointed with grey cement slurry including rubbing and 91 smt 962.33
machine polishing etc. complete at office area over plinth of HT Rooms,
Pump House and chlorine room.
Providing and laying polished Kota stone slab 25 mm thick in riser of steps,
dado & pillars, skirting, laid on 10 mm thick cement mortar 1:3 (1 cement :
3 coarse sand) and jointed with grey cement slurry including rubbing and
polishing etc. complete at HT ,LT & Office Room
Providing and laying white glazed tiles 6mm thick in flooring laid on a bed
43 of 12 mm thick cement mortar 1:3 and jointed with white cement slurry. 21 smt 848.93
Providing and laying white glazed tiles 6mm thick in skirting, risers of
44 steps and dado on 10 mm thick cement plaster 1:3 and lointed with white cement 24 smt 965.48
Providing and fixing water closet squatting pan (Indian type W.C. pan) size
580 mm x 450 mm white colour vitreous china long pattern type
conforming to IS : 2556 (Part III) together with 100 mm size vitreous China 'S'
45 trap as per IS : 2556 (Part XIII) both of an approved make including jointing 1.00 No 1241.11
the trap with the pan and soil pipe in C.
M. 1:1 (1 cement : 1 sand) with 32 dia. C. P. brass half turn flush cock complete
including earthwork, bed concrete of 1:4:8.
Providing and fixing C.P brass screws down stop tap 15 mm dia polished
46 bright , of approved make and design,with all necessary fittings. 4.00 No 203.79
Providing and fixing C.P brass screws down Bip tap 15 mm dia polished bright of
approved make and design ,with all necessary fittings.
Providing and laying(To level or slope) & jointing with stiff mixure of C.M 1:1 salt
48 glased stone ware pipes of 150 mm dia. Including testing of pipes and joints 20.00 Rmt 209.48
49 45 x 60 x 90 CM Chambers for Sewer line 2.00 No 3218.64
Provdg. & laying S.W. Gully trap with brick masonry chamber & water
50 tight G.T.Stone including fixing of cover Square mouth trap 100 mm x100 mm size 2.00 No 1279.40
Providing and fixing cast iron (Spun) Nahni trap of the following nominal
diameter of self cleaning design with C.I. screaed down or hinged grating
including cost of cutting and making good the walls and floor 100mm inlet and
50mm outlet. 100mm dia.
52 required wiring & points Electrician charge 3-phase wire 4.00 No 1600.00
SITC of Lighting Distribution Board as under:
3 Phase 4 Wire TPN, 6 way Prewired LDB (One each for Indoor & Outdoor
53 Lighting) Suitable to house : Incoming: 32A FP, ELMCB (30mA) Outgoing: 20A SP 4.00 No. 5028.81
MCB 'C' curve (9
nos.) & 16A SP MCB 'C' curve (9 nos.)
3C x 2.5 sq. mm. 2XWY/2XFY Cable (For Outdoor light / St. Light) (As per R&B SOR
2012-13, Page No.-87 Item no. 4-4- 2(a))
Supply, laying and erection of 25 mm approved make Double Walled
Corrugated pipes (DWC) of polyethelene (confirming to IS- 14930 II) with
necessary connecting accessoies of same material at required depth for laying of
cable below ground / road surface for enclosing cable and back filling the same to
make ground as per original. (For ICP earth pit wire, LT & Street light cables).
Infinite Civil Solution Pvt. Ltd.
INTERNAL WIRING
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated
ISI marked flexible stranded copper conductor wires with medium class
min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in /
to be run on B70 wall / ceiling with following sizes as mentioned below. The
unit rate wirings shall be with connector, PVC junction box, wires, holder,
ceiling rose, angle holder, switch, sockets, switch board, brass
chromium / cadmium plated machine screws, phase and neutral wires, green
Earth continuity wires etc. as required to complete wiring from LDB panel to
the final outlet termination points. The wiring shall be as per IS:732,
IS:4648 and as per tender specification / IS.
(a) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification &
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring &
earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multistrand copper wires with medium class Rigid PVC pipe
57 and accessories to be erected on wall / ceiling, complete with ISI marked 3 10.00 No. 245.76
/ 5 Pin socket and tissino type switch erected with earth continuity connection
erected on Metal / PVC box covered with 3 mm thick
PC(Polycarbonet) / Acrylic sheet.
58 providing UPVC SCH40 Pipe25 mm 200.00 Rmt 42.37
Providing & fixing in position aluminium fully glazed sliding windows with
15 micron natural matt brush finish anodised / poweder coating as per over all
size shown on the drawings and aluminium sections of approved make
conforming to IS:733 and IS : 1285, made out of 100.00 mm x 40.00 mm x
1.54 mm thick outer frame section weighing 1.139 Kg/m., bottom track
sections of 92 mm x
23.30 mm x 1.30 mm thick weighing 1.070 Kg/m., sides and top tracks of
92 mm x 23.30 mm x 1.90 mm thick section weighing 0.933 Kg/m., Shutter
inter lock of 40.00 mm x 18.00 mm x 0.80 mm thick section weighing
Kg/m. and Shutter top bottom & vertical made from 40.00 mm x 18.00 mm x
59 0.79 mm thick section weighing 0.289Kg/m fixed with rawl plugs and screws 9.00 smt 4250.00
or with fixing clips, or with expansion hold esters including necessary filling
up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. and aluminium snap beading for glazing / panelling, C.
P.brass/stainless steel screws, including standard anodised aluminium fittings
and fixtures of approved make and of adequate size and in adequate numbers,
with 5.5 mm thick wire glass of approved make including cost and fixing
of fixtures etc. complete as per detailed drawings with all lead and
Providing & fixing in position aluminium fully glazed fix ventilator with
micron natural matt brush finish anodised / poweder coating as per over all
size shown on the drawings and aluminium sections of approved make
conforming to IS:733 and IS : 1285, made out of 63.50 mm x 38.50 mm x 1.95 mm
thick outer frame section weighing
1.092 Kg/m. fixed with rawl plugs and screws or with fixing clips, or with
expansion hold esters including necessary filling up of gaps at junctions, at
top, bottom and sides with required PVC/neoprene felt etc. and aluminium snap
beading for glazing / panelling, C. P.brass/stainless steel screws, including
standard anodised aluminium fittings and fixtures of approved make and of
adequate size and in adequate numbers, with 5.5 mm thick wire glass of
approved make including cost and fixing of fixtures etc. complete as per
detailed drawings with all lead and lifts.
Infinite Civil Solution Pvt. Ltd.
Providing & fixing in position aluminum fully paneled doors with
micron natural matt brush finish anodized as per over all size shown on the
drawings and aluminum sections of approved make conforming to IS:733 and
IS : 1285, made out of 102 mm x 45 mm x 1.90 mm thick aluminum outer
frame section weighing 1.640Kg/m. and shutter sections with bottom / lock rail
2.7 mm, top rail 48 mm x 45 mm x 2.70 mm weighing 1.38 Kg/m. vertical styles
mm x 45 mm x 1.90 mm weighing 0.976 Kg/m. with rounded sides, fixed with roll
plugs and screws or with fixing clips, or with expansion hold esters including
necessary filling up of gaps at junctions, at top, bottom and sides with required
61 PVC/neoprene felt etc. and aluminum snap beading for glazing / paneling, C. 4.00 smt 4712.29
P. brass/stainless steel screws, including standard anodized aluminum fittings
and fixtures of approved make and of adequate size and in adequate
numbers, double action floor springs of approved make for each shutter
with standard pivot panels of 12 mm thick pre-laminated three layer medium
density, exterior grade particle board (termite proof, water proof and fire
proof)Grade 1, Type II conforming to IS : 12823 bounded with phenol
formaldehyde synthetic resin, of approved make including cost and fixing of
fixtures etc. complete as per detailed drawings with all lead and lifts.
MCC Panel : MEDIUM VOLTAGE PANEL BOARD (MCC) : S.I.T.C of LV
MCC Panel totally enclosed, dust & bermin proof, indoor type,
minimum degree of protection - IP 52 as per IS: 2147, operation on
3Phase, 4 Wire, 415V, 50Hz, Neutral effectively grounded, with
instrumentation compartments accomodating LED type indicating
lamps, control contactors as per IS: 13947, CT of accuracy class- I as
per IS: 2705, relays, meters & control MCBs, air insulated electrolitic
grade Aluminum busbar for three phase & neutral system with
incomming breaker- microprocessor based Air Circuit Breakers
(electrically operated drawout type)/ air break fixed type MCCB with
trip free mechanism, current limiting type as per IS: 8828, Motor
Contractor (as per type -2 coordination), Overload Relay with built-in
single phasing prevention feature & auxiliary feeders as per SLD
drawings, momentary contact type push buttons, equipment fittings,
bus bars, cable boxes, cable gland, incoming & ougoing cable
connection for 1100V grade, Aluminium/ Copper conductor XLPE/ PVC
insulated & PVC sheathed armoured cable, 10% spare terminals,
power wiring using 1100V grade, FRLS insulated copper conductor
wires conforming to IS: 694 & 8130, cable compartments/ alleys of
minimum 300 mm size, GI earth bus bar for entire length. MCC shall
be fabricated from cold rolled, coled annealed (CRCA) sheet steel &
minimum thickness of various members shall be as follows: Base
Frame/ Channel/ Gland Plate - 3 mm, Load Bearing Members/ Doors -
2 mm and Internal Partitions - 1.6 mm.
Microprocessor based Soft Starter with built-in by pass
contactor,Semiconductor Fuses, Harmonic Filters, cast resin type CT,
Digital MFM, Analog Ammeter & minimum 10 Channel Temperature
Scanner with RS 485 communication port. For 55 KW 2W+1S,
Infinite Civil Solution Pvt. Ltd.
APFC PANEL : Supply, installaton, testing & commissioning LV APFC
panel consisting of required capacitor banks for continuous duty to
improve P.F. 0.85 to 0.99 in required steps enclosed in dust & vermin
proof compartment, indoor type, fabricated from CRCA sheet steel
with minimum thickness of 3 mm for base frame / channel / gland
plates, 2.0 mm for load bearing members / doors & 1.6 mm for
internal partitions, minimum degree of protection - IP 42, busbar
chamber, required size of Al bus bar/ terminals, minimum 10 stage
APFC relay, metering, indicating lamps, push buttons, with detuned
reactor complete IS: 16636-2017 with latest ammendment & detailed
technical specification and data sheet as under. Up to 50 KVAR
capacity: APFC panel consisting following items. Above 50 & up to
KVAR: APFC panel consisting following items. Up to 50 KVAR capacity:
APFC panel consisting following items.
a) 125 A, 50 kA for 1sec. TP, TM based MCCB with spreader terminals
& rotary handle b) 0-125 A range analogue ammeter of 96 x 96 mm
size with selector switch c) 3nos. 125 / 5A, 10 VA CL-1.0 cast resin
type current transformer d) Suitable rating MCCB / MCB &Contactors
for each capacitor bank e) Suitable rating APP type capacitor banks
(vacuum impregnated with non-PCB / non toxic oil, internally delta
connected with built in internal fuses complete with discharge
resistances & terminal cover) of approoved make in required steps
with well suited detuned reactor is placed in series with each
capacitor step. (e.g., 50 KVAR capacity will be provided in steps of
nos x 5 KVAR, 2 nos x 7.5KVAR & 2 nos x12.5 KVAR). f) Enclosure.
dimensions- 1600 (H) x 1150 (W) x 600 (D)
MEDIUM VOLTAGE PANEL BOARD : S.I.T.C of 2 No.. (1W+1S) 55 KW
Auto Transformer Starter with MCCB, Contactor, O/L relay, cast resin
type CT, Digital MFM, Analog Ammeter, SPP, Timer etc.LV MCC Panel
totally enclosed, dust & bermin proof, indoor type, minimum degree
of protection - IP 52 as per IS: 2147, operation on 3- Phase, 4 Wire,
415V, 50Hz, Neutral effectively grounded, with instrumentation
compartments accomodating LED type indicating lamps, control
contactors as per IS: 13947, CT of accuracy class- I as per IS:
relays, meters & control MCBs, air insulated electrolitic grade
Aluminum busbar for three phase & neutral system with incomming
breaker- microprocessor based Air Circuit Breakers (electrically
operated drawout type)/ air break fixed type MCCB with trip free
mechanism, current limiting type as per IS: 8828, Motor Contractor
(as per type -2 coordination), Overload Relay with built-in single
phasing prevention feature & auxiliary feeders as per SLD drawings,
momentary contact type push buttons, equipment fittings, bus bars,
cable boxes, cable gland, incoming & ougoing cable connection for
1100V grade, Aluminium/ Copper conductor XLPE/ PVC insulated &
PVC sheathed armoured cable, 10% spare terminals, power wiring
using 1100V grade, FRLS insulated copper conductor wires conforming
to IS: 694 & 8130, cable compartments/ alleys of minimum 300 mm
size, GI earth bus bar for entire length. MCC shall be fabricated from
cold rolled, coled annealed (CRCA) sheet steel & minimum thickness
of various members shall be as follows: Base Frame/ Channel/ Gland
Plate - 3 mm, Load Bearing Members/ Doors - 2 mm and Internal
Partitions - 1.6 mm.size-2200 x 600 x
Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse
Unit Cubical Type suitable for Panel / Wall mounting complete with
65 operating mechanism suitable to operate on 415V AC with HRC Fuses 2 No. 8800.00
of suitable load confirming to IS 13947 (Part I & III) of following
capacity. 200 Amp Cat III
Infinite Civil Solution Pvt. Ltd.
MEDIUM VOLTAGE CABLES : Supply, laying, testing & commissioning
1.1 kV grade, XLPE insulated, stranded Aluminium conductor,
galvanised steel flat strip / round wire armoured, extruded PVC type
ST2 sheathed, heavy duty cable (to be laid on wall surface with
necessary clamps / in existing cable trench / cable trays / conduit /
pipe sleeves at road crossing or floor as per site requirement)
conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes
3.5 c X 70 Sq.mmAL XLPE Armoured (For MVDB to PMCC Panel)
67 1R X 3 c X 50 Sq.mmAL XLPE Armoured (For APFC Panel) 100 mtr 678.00
3 c X 35 Sq.mmAL XLPE Armoured (For PMCC Panel to for each 55 KW
motor) &APFC PANEL
4 C x 6 sq.mm. Al. XLPE ((For WR-DB with TPN MCB at Sump & Pump
House, Outdoor LDB, Indoor LDB, & Auxilury-PDB Feeders. Etc.) )
70 3 C x 2.5 sq.mm.2XWY/2XFY (For Indoor & Outdoor Lighting ) 150 mtr 61.00
CABLE GLAND : Supply, erection, testing and commissioning of Double
Compression Weather proof type Ni-Plated brass cable glands with
necessary tools and equipments as specified in specifications and
relevant IS. The glands and Lugs/ Sockets shall be suitable for cable
size and type mentioned below & as per specifications.
3.5 c X 185 Sq.mmAL XLPE Armoured (For TR. to MVDB )
72 3.5 c X 70 Sq.mmAL XLPE Armoured (For MVDB to PMCC Panel) 4 No. 270.00
73 3 c X 50 Sq.mmAL XLPE Armoured (For APFC Panel) 4 No. 720.00
3 c X 35 Sq.mmAL XLPE Armoured (For PMCC Panel to for each 55 KW
motor) &APFC PANEL
4 C x 6 sq.mm. Al. XLPE ((For WR-DB with TPN MCB at Sump & Pump
House, Outdoor LDB, Indoor LDB, & Auxilury-PDB Feeders. Etc.) )
76 3 C x 2.5 sq.mm.2XWY/2XFY (For Indoor & Outdoor Lighting ) 6 No. 73.00
Supplying and erecting Crimping type Aluminium/copper lugs
conforming to IS suitable for cable as below evenly crimped with high
77 pressure tools and connected to switch gear terminal with 10 No. 21.00
brass/cadmium plated nuts bolts in an approved manner.
3.5 c X 185 Sq.mmAL XLPE Armoured (For TR. to MVDB )
78 3.5 c X 70 Sq.mmAL XLPE Armoured (For MVDB to PMCC Panel) 10 No. 8.00
79 3 c X 50 Sq.mmAL XLPE Armoured (For APFC Panel) 8 No. 35.00
3 c X 35 Sq.mmAL XLPE Armoured (For PMCC Panel to for each 55 KW
motor) &APFC PANEL
4 C x 6 sq.mm. Al. XLPE ((For WR-DB with TPN MCB at Sump & Pump
House, Outdoor LDB, Indoor LDB, Auxilury-PDB Feeders) )
82 3 C x 2.5 sq.mm.2XWY/2XFY (For Indoor & Outdoor Lighting ) 12 No. 1.00
CABLE TRAY,Trench & Laying : Supply & laying GI ladder type cable
trays with side channels of size - 75 x 15 x 15 mm/ 100 x 15 x 15 mm
& rungs of size - 35 x15 x 15 mm spaced at 250 mm apart, fabricated
from 2 mm thick sheet steel in standard length of 2.5 meter, duly hot
dipped galvanized after fabrication as per IS 2629- 1989/ IS 4759-1984
including accessories such as coupler plates/ fish plates, bends, tees,
reducers, elbows, covers and electro-galvanized hardware etc, erected
on existing support as per specification and instruction of engineer in
a) 150(W) x 75(H) x 2.0 mm Thick
84 b) 300(W) x 75(H) x 2.0 mm Thick 120 mtr 388.00
Cable Trench, Laying & Installation of Cable: Making trench in soft soil
of suitable width of 90 cms deep for laying cable or locating the fault
all over the run and backfilling the same and making the surface as
Infinite Civil Solution Pvt. Ltd.
Cable Covering in Trench: Covering of cable with second class bricks or
cement tiles laid cover the cable crosswise & also on both sides with
covering of 7. 5 Cms. layer of sand above & below cable (16 bricks per
meter) as per IS & Specification. (For HT & LT cable trench)
EARTHING : Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron galvanising,
Inner pipe dia of 25 mm having 200-250 Micron galvanising,
87 connection terminal dia of 12mm with constant ohmic value 20 No.. 5701.70
surrounded by highly conductive compound with high charge
dissipation suitable for following type of applications.
(a) For Electrical installation up to 11 KV in normal soil. Length of Pipe
: 2.00 mtrs Back filling Compound :1 no.(50x25) Bag of 25 Kg (For
Transformer ,vcb)
Supplying & erecting earth pit of minimum bore dia.150mm size
approved make Earthing Electrode consisting Pipe-in-Pipe Technology
as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer
pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of
25 mm having 200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following type of
applications. (a) For Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer
System(like Automation, SCADA) i.e independent Earthing in normal
soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 No. Bags of
25 Kg. (For Transformer netural)
Supplying & erecting earth pit of minimum bore dia.150mm size
approved make Earthing Electrode consisting Pipe-in-Pipe Technology
as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer
pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of
25 mm having 200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for following type of
applications. (a) For Electrical installation up to 11 KV in normal soil.
Length of Pipe : 1.00 mtrs Back filling Compound :1 no.(50x25) Bag of
25 Kg (For MVDB)
Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with
necessary coupling buch buried in specially prepared earth pit & G.I.
90 earth wire of 8 SWG erected & connected as directed. For using salt 8 No. 983.05
and charcoal / coke as required for pipe type earthing.complete in all
respects. ( for PMCC Panel, Motors,APFC)
G.I. EARTH STRIP: Supply, laying and erection of 40mm(w) x 6mm(T)
etc. sizes as required, HOT deep GI Strip including supply & fixing
using GI spacers, saddles when laid inside the building and inclusive of
91 excavation & refilling of earth when laid outside the building & 374 KG 76.28
interconnection with earth pit & all electro-mechanical equipments.
(40X6 G.I Strip wt.1.87 kg/m, 1.87x100Mt.=187kg.) ( for PMCC Panel,
Supply, laying and erection of HOT Dip Galvanized iron strip wire
92 SWG (For LDB, PDB, LCS, lighting, etc.) (8 SWG G.I Strip, 0.101 Kg/m, 150 KG 76.27
0.101 x 100Mt.=10Kg)(for ldb & pdb)
Infinite Civil Solution Pvt. Ltd.
POINT WIRING : Point wiring for Individual Plug with earthwire of
sq.mm (Green) both are of ISI marked 1.1kV grade FRLS PVC insulated
multistrand copper wires, in following type of to be erected concealed
in/ on surface of wall/ ceiling complete with Modular type switch &
pin Plug erected on PVC/ Metallic box covered with appropriate front
plate modules erected on/ in wall/ ceiling as per pipe erected with
following type of accessories For 6A Plug with 2-1.5 sq.mm Cu. Wire
with medium class Rigid PVC pipe and accessories type of Cat.i.
Point wiring for Individual Plug with earthwire of 1.5 sq.mm (Green)
both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand
copper wires, in following type of to be erected concealed in/ on
surface of wall/ ceiling complete with Modular type switch & 5 pin
Plug erected on PVC/ Metallic box covered with appropriate front
plate modules erected on/ in wall/ ceiling as per pipe erected with
following type of accessories For 16A Plug with 2-2.5 sq.mm Cu. Wire
with medium class Rigid PVC pipe and accessories type of Cat.i.
LED LIGHT FIXTURES : SITC of Indoor wall mounting LED indoor fitting
with LED s of wattage 0.2 watt to 0.5 watt assembled on single
MCPCB with housing used as a heat sink shall be made of thick sheet
steel confirming to IS :513/CRCA polyester powder coated and high
U.V. & corrosion resistance with diffuser and/or Poly carbonate optics
with company mark/name 120 to 300V, Power Factor more than 0.9,
THD <10%, CCT 4000K to 6500K, Uniformity ration >0.7, Luminare
efficancy > 85 Lumens/watt, LED driver efficiency >85% (Each fitting
required LM-79 & LM-80 Certificates) Tube Light with integral/
nonintegral driver 20-22 Watts, Surge - 4KV,IP-20, 4 feet Cat III
SITC of Surface mounting LED indoor Flood fitting withHigh Power
white LED s of wattage 1 watt to above assembled on single MCPCB,
efficiency more than 130lm/w and corrosion free High pressure die
cast ailuminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and polycarbonate
optics/lenses with company mark/ name engraved 120 to 300V,
Power Factor more than 0.95, THD <10%, CCT 5000K to 5700K,
Uniformity ration >0.45, Luminare efficancy > 85 Lumens/watt,LED
driver efficiency >85% (Each fitting required LM-79 & LM-80
Certificates) 200 Watt Indoor Flood Light (IP-65), Surge -4KV Cat-III
CEILING FAN : Providing and erecting Approved make 1200mm sweep
ceiling fan, capacitor type, having double ball bearing 450mm down
97 rod, canopies, shackle, rubber bush, blades, electronic speed 3 Set 1440.68
regulator, suitable to operate on 230V,50Hz AC supply conforming to
IS: 374/1979.Fan shall be painted with white colour.
EXHAUST FAN :Supplying & erecting single phase approved make
industrial exhaust fan suitable for medium duty ring mounted low
98 noise operation suitable for medium duty having 380mm dia size and 3 No. 3561.09
maximum speed in 900RPM as per specifications & of approved make
of category-III for Pumping Station.
SAFETY ACCESSORIES : SITC of following safety accessories complete
with necessary fixing brackets, other accessories and tools etc. as
required to complete the job.Supply & Erecting carbon dioxide (CO2)
fire extinguisher of 6.5kg capacity with necessary clamps made from
50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. (for
Infinite Civil Solution Pvt. Ltd.
Supplying stand first AID box with anticeptic cream, medicine for use
on wounds due burn, crepe bandage, guage bandage, medicated
100 ready to use bandage (Band-aid) adhesive tape for medicinal user, 1 No. 296.62
scissors, anticeptic solution (Savlon or similar) etc. (All above contents
shall be of standard makes) (For Pump house / LT Room)
Providing printed instruction chart both in English and Gujarati and
101 duly framed with front glasses for treatment of person suffering from 1 No. 127.12
Electric shock.. (1no. for 1no. For LT Room)
Supplying rubber matting of 12 mm thickness as per IS 5424 and of
102 required length and breadth with good insulation property for 22 KV 12 Smt. 3051.00
Providing and laying broken chine mosek flooring for terrace using 12mm to
20mm broken pieces of glazzed tiles to be laid over cement mortar 1:3 to plain or
103 slope and to be tempered to bring mortar crème out up to surface using white 42 Smt. 739.89
cement including rounding off junction and extending them up to 15cm along the
wall clearing with water and oxalic acid etc. as directrd.
Supplying and fixing gear operated type, 20 gauge rolling shutter of approved
make for the sizes indicated on drawings including hood cover channel sliding
assembly, helical coil springs, brackets, interlocking latches, locking
arrangements, painting with 2 coats of enamel paint over one coat of approved
primer paint etc. complete. (A) Shutters having width below 3.5.M.
Providing and fixing window having extruded aluminum Colour Powder Coated
section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,
horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07
Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt
105 with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 6 Smt. 1576.14
0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of
0.456Kg/mt with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon sealant
glass fixing to frame as per details etc
SITC of Lighting Distribution Board as under: 3 Phase 4 Wire TPN, 6 way Prewired LDB
(One each for Indoor & Outdoor Lighting) Suitable to house : Incoming: 32A FP, ELMCB
106 (30mA) Outgoing: 20A SP MCB 'C' curve (9 nos.) & 16A SP MCB 'C' curve (9 nos.) 4 No. 6474.58
Providing Control Pannel Board for submersible Pump set with sutable capactior
as per required capacity of pump.
SUBMERSIBLE CENTRIFUGAL PUMP-MOTOR SET:
Supply, Installation, Testing and Commissioning of Submersible Centrifugal Pump-
Motor set for water with SS CF8M enclosed type Impeller with CI Casing & casing
cover, SS 410 shaft suitable with 3Phase, 415 V. 50 Hz., AC induction dry type
submersible motor of mini, rating as specified having max. 1500 RPM sync, speed,
Class F insulation and IP-68 protection. The scope shall include all required
accessories viz. Pump, 250mm dia. 6mm thick MS delivery pipe and MS 500mm
dia Header having thick 8mm in P.H. including MS specials, automatic coupling
device, double guide pipes, chain with shackle, 25Mt. length round submersible
108 Power & control cable, (25m, 4 core round copper conductor, PVC insulated 4 No. 633424.00
power cable of reqd size & 1.5 sq mm control cables of required core for each
pump motor set) with necessary electrical termination connection at junction box
/ starter panel and precast foundation blocks for auto coupling & delivery bend,
guide pipe etc. as per the specification / IS. (2W+1
Pump Capacity: 750m3/hr. Head: 25 m,
Standbye.) Motor mini. Rating:75 kW/ 100HP, (Total flow of two working pump
not less than 1500 m3/hr at 25 mt head)
Pump Capacity: 600m3/hr. Head: 25 m,
Standbye.) Motor mini. Rating: 68kW/ 90HP,
Providing hook of 16 mm dia in the beam for loading & unloading
109 the E.O.T crane as per requirement and as directed by Engineer in Charge.( R.A) 4 No. 76.00
Steel work, riveted in built up sections framed work including cutting, hoisting,
fixing in position and applying a priming coat of red lead paint. (A) In beams and
110 joists, channels angles Tees, flats, with connecting plates or angle cleats as in 4 Qun. 5761.04
main and cross beams. Hip and jack rafters, purlins conneted to common rafters
Infinite Civil Solution Pvt. Ltd.
Mains with isi marked, 1.5KV grade electrolyte multi stranded,
annealed copper conductor with heat resistant PVC insulated
conforms to IS 694 IEC-227 erected in existing pipe af following size
specifically for control panel, relays, power switchgears, motor
starters& control wiring) with required size of copper lugs, nuts and
bolts if required (f) One wire 10.00 sq.mm SOR it. no. 1-4-4F
supplying and Fiexible PVC insulated multistrand multicore 1.1 kv
grade ISI marked 45.45 Ea 1363 500 copper wires of following size to
be erected as directed . e) 1.50 sq mm 3 core round PVC sheathed
SOR it. no. 1-4-5E
providing & erecting 415V MCB Four Pole for Lighting Load(B curve)
having 10KA breaking capacity & confirms 1o IS 8828 in existing box
having following capacity, (b) 40 Amp Cat - III SOR it. no. 3-10-4
Supplying & erecting earth pit min. dia 150mm size approved make
Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free GI Pipes having outer of 50mm having
80.200 Micron galvanising Inner pipe dia of 25 mm having 200
114 Micron galvanising, connection terminal dia of 12mm with constant 7.00 No. 5363.00
ohmic value surrounded by highly conductive compound with high
charge applications(a) For Electrical Installation up to 44ov in normal
soil Length of pipe 1 Mtr Back filling compound I Nos Bag of 15 Kg.
SOR it. no. 3-14-9A
Providing and erecting XLPE is (IS : 7098) (i)-88 ISI armoured cable
multistrand Aluminium conductor or 1.1 KV to be laid on wall with
necessary clamps or in existing trench / pipe of following size 4 core
Providing & erecting PVC Corrugated Flexible Conduit with required
116 nos. of coupling, PVC bushes, Check-nuts etc. complete of following
20 MM PVC Corrugated Flexible PIPE 580.00 MTR. 18.00
32 MM PVC Corrugated Flexible PIPE 50.00 MTR. 29.00
Supplying and erecting approved make Segment time switch suitable
for 230V + 10% 16A. fioating contacts with 24 hour dial having 15/30
min segments with early manual override switching for on & off
117 without influencing the program sequence with quartz time switch 10.00 No. 2600.00
With power reserve, housed in fire proof thermoplastic enciosure
hansparent cover terminal covers erectod as required wire necessary
connection erected as directed It-6-7-3
Supplying and erecting LED street light / Flood light fittings with High
power White LEDs wattage of 1Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High
pressure die cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser and
Polycarbonate optics/ lenses with company mark/name engraved or
118 embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %, 20.00 No. 4000.00
CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficiency>
lumens/watt . LED driver efficiency > 85 %. CREE / OSRAM / PHILIPS
Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for
luminaire. ( Each fittings required LM-79 & LM-80 certificates) With
Bracket & reflective cover - above 24 to 36 watts Cat-lll
Infinite Civil Solution Pvt. Ltd.
Supplying and erecting approved make Octagonal/Round decorative
pole made from HR sheet steel. The pole should be made as per IS.
and shall be coated with hot dip galvanizing as per IS
2629/2633/4759, suitable suspend local wind speed with integral
Junction box consist of terminal plate of min 6mm Hylam sheet,
standard profile 35mmX7.5mm Din-Rail for MCB Mounting, and with
119 MCB box stud type terminal and arrangement for cable termination to 20.00 No. 9735.00
be erected With Suitable foundation (Included) as per details given by
manufacturer considering site requirement. - With half Round
decorative arm of 0.5meter length as directed by E.I.C. (A) 7.5 Mtr.
Long 70 mm Top X 130 mm bottom dia.3 mm thickness with
200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long J-
Bolt.Approx weight 29 kq
LEGEEN Light Black Waterproof Garden Light Gate Light Bollard Light
120 Entryway Pathway Garden Area Dimensions 30L x 12W x 80H 25.00 No. 5600.00
(Pumpset-10HP) Dewatering by pumping set of required capacity
including temporary platform carting pumping at site and fixing the
same in position including all accessories, and fuel and labour etc.
Providing laying and spreading granual material in required proportion
so as to have mix material gradation of GSB grade ll, oncluding
122 sprending in uniform thickness, rolling with vibratory roller 80-100 kn 932.00 Cmt. 999.00
tatic wt. to proper grade and camber including watering etc. complet
Providing , laying , spreading and compacting graded stone aggregate
to Wet Mix Macadam (as perv Table 400-10 and 400-11) specification
including premixing the material with water at OMC in machenical mix
plant as per approved design mix, carriage of mixed material by tipper
to site, laying in uniform layers with motor grade/front end loader/
paver finisher in sub base/base course on a well prepared under base
and compacting with vibratory roller to achieve the desired density
including lighting, gauriding barrication and maintenance of diversion
et. (MoRTH specification : ckause 406) By mechanical means
Table for operator room As per Instruction of EIC. 1.00 No 15000.00
steel chairs as per instruction EIC 4.00 No 2500.00
Supplying Steel Cupboard of Size 2'-11" x 6'-0" Godrej brand or
Approved equivalent brand as 1.00 No 5000.00
specified/Approved by Engineer in charge.
Electric ceiling Fan as per Vendor list 2.00 No 1441.00
124 Tube light as per Vendor list 2.00 No 304.00
LED Bulb 5Watt as per Vendor list 2.00 No 88.00
Sintex tank for Toilet Block of 1000 Ltr. as per Vendor list 1.00 No 4000.00
sofa 3 Seat as per Approved by Engineer in charge. 1.00 No. 20000.00
FRC Manhole COVER 2.00 No.s 1608.00
Lawn in garden area landscapping including supply , lawn prepration , soil supply
labour and take caring till 45 days
Providing, supplying and fixing sluice gate valve on sump for incoming water inlate
125 portion to store the water in sump and maintanace work of size -600x600 mm as 4.00 Nos. 150568
per requirement and instruction of EIC.
Making hole of following dia pipe in RCC. Rate includes electrical hand operated
126 braker set, gas cutting set with all required equipment & removing debris etc. 15.00 Nos. 1866
complete. (00 to 600mm dia )
Infinite Civil Solution Pvt. Ltd.
Unforeseen items from this project which are not included of this tender schedule
Follwing things can be consider in this item:-
1. Extra Item which is execute on site EIC have right to consider item in this on
basis of Previling SOR Rate or if the item is not in the SOR then Mutually
Discussion with work agency and finalised rate of perticuler item (detailed rate
analysis of the item shall be submitted and approved with supporting documents
127 (quatation, GST Bill etc. ) . 1 L.S. 1000000.00
2. Extra Work which is Required to execute in this project on site EIC have right
to consider item in this on basis or Previling SOR Rate or Mutually Discussion with
work agency and finalised rate of perticuler item.
Note - The payment shall be done on the basis of work excuted on site and the
item which is not consider in this project.
Infinite Civil Solution Pvt. Ltd.
Name of work - Construction of 40 ML Capacity of Raw Water Sump at Tarsamiya near New WTP
Water Operation (O.&M.)
Sr No Item Description Qty Unit Rate (Rs) Amount (Rs)
Providecomprehensiveoperationandm
aintenance services for 24 months
with all materials and labour work
including all supply of manpower,
repairs and maintenance of all
units,spares,consumables,services of
any expert as required and any other
1 work required for smooth operation 12 Month 84000.00
and maintenance of entire facility as
per instruction given by eic.The
taxes,insurance of whole property and
staff will be borne by contractor.
O&M period for 1st
Year(Pumpoperator-1+Lineman-
1+Chowkidar-1 in a day)
O&M period for 2nd
2 Year(Pumpoperator-1+Lineman- 12 Month 89000.00
1+Chowkidar-1 in a day)
Total 2 Year O&M for 24months
Infinite civil solution Pvt. Ltd.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
DETAILED TENDER NOTICE (NIT).pdf
Vol - 1 Tech Bid.pdf
Vol - 2 GCC.pdf
Vol - 3 Item specifications.pdf
Vol - 4 Price Bid.pdf
vol - 5 Drawing.pdf
BMC Vendor list-2023.pdf
vendor list - 30.03.2026.pdf
Download all tender documents and submit your bid