REPAIR/REPLACEMENT OF FLOORING, INTERNAL PLUMBING GI PIPES, PLINTH PROTECTION, SANITARY FITTINGS, ALUMINIUM JOINERY WORKS INCLUDING CONNECTED ITEMS IN OTM AND OMQ AT AF STATION TEZPUR UNDER GE (AF) TEZPUR

Amount

M&L Cement concrete in shunk portion filling in mass concrete Type E2 1:5:10 (using 40mm graded aggregate) Including demolition of cement concret complete all as specified and directed .

Material and labour coloured glazed ceramic tiles 450mm x 300 mmx 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick plaster in CM(1:3) on brick work for fixing of tile and dismantling of old existing wall tile including cement mortar bedding (but not backing), removing rubbish of the premises & complete all as specified and as directed

Material and labour non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300mm) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed orbedding layer in CM (1:6) for laying floor finishes and dismantling of old existing floor tiling including cement mortar bedding (but not backing), removing rubbish of the premises & complete all as specified and as directed

M&L for Rendering 10mm thick in CM 1:3 using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement and curved adqutely and after drying apply two coats of epoxy resin of Fosroc or equivalent both on floor and walls of sunken poriton and tested complete all as specified and directed .

Material and labour 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor including taking down or up the old steel tubing complete all as specified and as directed.

Taking down and refixing of galvanized steel tubing ,medium grade, 15mm bore with all fittings and fixed complete to walls and ceiling or laid in floor all as directed. Note:-(i) The rate including taking down or up the old rusted steel tubing (ii) While fixing of pipe new fittings as required shall be provided by the contractor and cost of same in included in the unit rates of this item. (iii)The old pipe shall be cleared properly before use in the work and cost of cleaning is included in the unit rate of this item.

Material and labour 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor including taking down or up the old steel tubing complete all as specified and as directed.

Taking down and refixing of galvanized steel tubing ,medium grade,20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor including taking down or up the old exisitng steel tubing complete all as directed. Note:- (i) While fixing of pipe new fittings as required shall be provided by the contractor and cost of same in included in the unit rates of this item. (ii)The old pipe shall be cleared properly before use in the work and cost of cleaning is included in the unit rate of this item

Material and labour cutting chases, pinning in brick wall and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills chases for concealed water tubing exc. 10cm but not exc. 20cm girth complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white incl pvc white colour seat cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. Make and model No Prayag Garnet 4018 White , Prayag seat cover Cat No -513 or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repairs vitreous china squatting pan,”Orissa” pattern, size 580mmX440mm, white, with integral foot rests, ‘S’ trap (excluding flushing cistern and flush pipe) and provision of lime concrete bedding including demolition fo existing WC and removal of debris from the site ccomplete all as specified and directed . Make and model No Prayag cat No- Orirsa Pan 4055-or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair 10 litres capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Make and model No Prayag Cat No -501 , Cera/Kohler/Hindware/Parryware

Supply and fix in repair for vitreous china wash basin, white, flat back, size of 550mm x 400mm including cutting for and pinning in ends of bracket or erecting stand and including 32mm dia waste pipe & brackets including waste coupling of size 32/40 of PTMT complete all as specified and as directed.

S&F in repair waste pvc pipe 950mm long for kitchen sink/ wash basin complete all as specified and directed Make Prayag and model No 3274 or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repairs 50mm bore low density poly ethylene pipes (LDPE) of pressure rating 6 Kg/Square cm fixed to walls, ceiling or in floors etc. complete all as specified and as directed.

Supply and fix in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)), complete all as specified and directed. Make and model No Prayag Cat No- 130-A or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. Make and model No Prayag Cat No- 323-HK or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair 15mm stop valve/ fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union (concealed type) complete all as specified and as directed.

Supply and fix in repair 15mm stop valve (PTMT) fancy type , screwed down, high pressure, screwed both ends for iron pipes or union (concealed type) complete all as specified and as directed. Make and model No Prayag Cat No- 146-Cor or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair 15mm stop valve/ angular stop cock fancy type chromium plated alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or union complete all as specified and as directed.

Supply and fix in repair stop valve (PTMT) Standard 15mm, screwed for steel pipes, complete all as specified and directed.

Supply and fix in repair 15mm bore bib taps, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair for 15mm Bib Cock (PTMT) , screwed for steel pipes, fixed in repairs, complete all as specified and directed Make- Pryag Cat No -121-A or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair 15mm bore long body bib taps,(PTMT) , screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make- Pryag Cat No -124-A or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair 15mm bore long body bib taps, chromium plated with CP flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make- Cera/Kohler/Hindware/Parryware/Pryag Cat No -8508

Supply and fix in repairs 15 mm CP health faucet with 1 mtr long stainless steel tube and hook complete all as specified and as directed. Make and model No /Prayag cat No- BEA- 95-S or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repairs CP soap dish complete all as specified and as directed. Make and model No.Prayag Cat No BA -15 or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair plastic water closet seat cover, white/ black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed. Make and model No. Prayag Cat No 513 or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Supply and fix in repair grating doom round with waste hole/ without hole, 125mm size of PTMT, (min weight 40 gms) complete all as specified and directed.

Supply and fix in repair grating doom round with waste hole/ without hole, 100mm size of PTMT, (min weight 25 gms) complete all as specified and directed.

S&F as in repairs PVC Nahani traps 75 mm with jali complete all as specified and directed .

Taking down & refixing 10 Ltr Capcity PVC flushing cistern after necessary repair work including connection to IWC/EWC and pvc connection complete all as specified and as directed.

S & F in repair Towel rail 600mm long of PTMT fixed with and including screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick or lavortary with plug, washers PVC Waste pipe 800mm long and waste coupling ;including bedding in cement mortar to wall including fixing cantilevers backets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x330mm x 160 mm complete all as specified and directed .

S & F in repair 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, including all fittings like PVC bend , Tee etc and taking down old unsv rainwater pipes complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including all necessary fittings like PVC bend, Tee etc and taking down old unsv rainwater pipes complete all as specified and as directed.

S & F in repairs 75mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F in repairs 110mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F 75mm bore PVC (SWR) junction single (Single ‘T’) equal or unequal with access door complete all as specified and as directed.

S & F 110mm bore PVC (SWR) junction single (Single ‘T’) equal or unequal with access door complete all as specified and as directed.

S & F in repair for 500 Litres capacity three layer rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC Float valve 20mm bore, Tank cover, wash out and overflow pipe necessary tank nipples, after disconnecting existing tanks from roof slab/ staging of single/double storey bldg, lowering, complete all as specified and as directed.

S & F in repair for 1000 Litres capacity three layer rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC float valve 20mm bore, tank cover, wash out pipe, overflow pipe, tank nipple,after disconnecting existing tanks from roof slab/ staging of single/double storey bldg, lowering, complete all as specified and as directed.

S & F in repair for 20mm bore ball/float valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, (min weight 210 gms), complete all as specified and directed Make and model No. Prayag Cat No 152 , Cera/Kohler/Hindware/Parryware

Taking down & refixing EWC Vitreous China after necessary repair work including connection to P/S trap, seat cover, flushing cistern, flush pipe etc complete all as specified and directed .

Taking down & refixing WHB Vitreous China after necessary repair work including connection to taps waste fittings etc complete all as specified and as directed.

S&F in repair PVC flush pipe for IWC/EWC including necessary connection & white cement work complete all as specified and directed.

S&F in repairs 40mm dia waste coupling, brass chromium plated for kitchen sink, etc with long screwed shanks and fly nuts, complete all as specified and as directed.

S&F in repair PVC water tank cover suitable for 250 to1000 Ltrs capacity with necessary fixing arrangement complete all as specified and directed.

S & F in repair shower rose 65mm size PTMT swivel joint with arm any size including fixing to steel pipe or union acomplete all as specified and directed . Make- Prayag -181 CERA, Essco, parryware and equivalent.

Opening of air lock in GI pipe 15mm/20mm by removing/taking down of GI pipes, bib taps (Including flushing out sand/silt by using electric driven water pumps/motors) and refixing as same, to obtain optimum water pressure complete all as specified and as directed.

Supply and fix in repair for vitreous china urinal flat back, Half stall type with grating and union for discharge pipe (excluding flushing cistern, flush pipe and ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long screws, pointing around urinal back in cement, fixed in repairs,waste pipe 800mm long complete all as specified and directed. Make- Prayag -181 or equivalent model No. of Make Cera/Kohler/Hindware/Parryware

Material & Labour for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) incuding demoiton of Brickwork complete all as specified and directed .

M&L for half thick brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius with old size bricks locaaly available built in cement mortar 1:4 complete including dismantling the existing brick works all as specified and directed.

M&L 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement and preparation of the newly plastered surfaces and applying two coat of Oil bound distemper over a coat of primer etc all as specified and directed .

M&L 15 mm thick cement plaster in CM (1:4) in two layers (5mm thick with approved water proofing compound over backing layer of 10 mm thick )on fair faces of brick work incl finished even and smooth without using extra cement. (WPC @ 2% of cement, will be paid separately ) and preparation of the newly plastered surfaces and applying two coat of cement based paint over a coat of primer etc complete all as specified and directed .

Supply only integral water proofing compound.

M&L 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement including taking down cement plaster , raking out joints, hacking for key, scrubbing down with water and preparation of the newly plastered surfaces and applying two coat of Oil bound distemper over a coat of cement primer etc all as specified and directed .

Material & Labour for 75mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection including finishing surfaces even and smooth without using extra cement including demoliton of cement concrete (unreinforced) complete all as specified and directed .

Material and labour for RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) as in slab supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs and in shelves including demoliton of RCC of any description , in any position , complete all as specified and as directed. (Note : Reinforcement shall be measured and paid seperately under relevant)

Material and labour TMT bar 10 mm and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed.

Material and labour form work to edges of concrete flats sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed .

Material and labour form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 5cm but not exc 10cm wide for rough finished surfaces of concrete, flat complete all as specified and as directed.

M&L for Kota Stone slab 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed orbedding layer in CM (1:6) for laying floor finishes and dimantling the existing stones complete all as specified and directed.

Material and labour granite tiles/stone 20mm thick machine cut as in floor/slabs etc, bedded and jointed with grey cement slurry and pointed wikth white cement with admixture of pigment to match shade of granite stone including grinding and polishing including screed bed 15mm thick in CM (1:4) and dismantling the existing granite tiles/stone complete all as specified and directed.

Taking down chowkat or frame (without taking off shutter from the frame) exceeding 1.5 and not exceeding 4 sqm complete all as directed.sqm each complete all as specified and directed .

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed .

Taking down shutter of any description not exc. 1.00Sqm complete all as specified and directed .

Taking down shutter of any description exc. 1.00 Sqm and not exc 2.00 Sqm ccomplete all as specified and directed .

Supplied and fixed Pressed steel frames for doors mild steel sheet of 1.25mm thick size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed .

Supplied and fixed Pressed steel frames for doors mild steel sheet of 1.25mm thick size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed .

Supply and fix for 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (a) complete all as specified and as directed.

Supply and fix for 30 mm thick 2nd class hard wood glazed and skeleton shutters, for window /ventilators open rebated and prepared to receive glass, gauze etc divided in to squares with plain, chamfered or rounded, fitted with cut or mitred sash bars (any numbers) timber beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (b) complete all as specified and as directed.

Supply and fix 35mm thick factory made plain framed, panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix butt hinges 100mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix butt hinges 75mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix 150mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

Supply and fix 100mm long mild steel pressed handles, oval type, stove enameled black complete all as specified and as directed.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed .

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 150 mm long complete all as specified and directed .

Supply and fix 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

Supply and fix for mild steel works as in hold fast and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for PCC(1:3:6) type C1 (using 20mm graded broken stone aggregate) for fixing hold fast complete all as specified and as directed.

Taking down shutter and re-fixing in same opening of shutters of any description not exceeding 1 sqm with existing chowkat , frame or wiith new chowkat or frame each complete all as specified and directed .

Taking down shutter and re-fixing in same opening of shutters of any description exceeding 1 sqm and not exceeding 2 sqm with existing chowkat , frame or wiith new chowkat or frame complete all as specified and directed .

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed .

Supply and fix for 150mm long aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fix in for 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in repairs for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs up to G+2 )complete all as specified and as directed.

Supply and fix in repairs for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars (wire mesh shutter) dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 ) complete all as specified and as directed.

Supply and fix in repairs for factory made steel ventilator top hung shutter including hinges steel peg stay, complete dovetailed or welded and making good the disturbed surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2 ) complete all as specified and as directed.

Supply and fix in for mild steel frame works such as grills, gratings etc with ends of bars shouldered and/ or reveted, or forged in to spikes, framed guard bars, framed balusters, railing and similar works conforming to Fe-290 Gde-E-165 complete including dismantling the existing grills all as specified and as directed.

Supply and fix for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass of any thickness or any size complete all as specified and as directed.

Supply and fix for 6.3mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane including hacking out old broken glass of any thickness or any size complete all as specified and as directed.

Supply and fix for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

M& L for glazing oil putty for existing glass of window exc 1 sqm and n, exc 2 sqm

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples or with wooden beading or any other fixing arrangements complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix for 2nd class hard wood timber in fillets, square, rectangular or triangular in section, clean sawn, fixed with nails, sectional area exc 13 Sqcm but not exc 25 Sqcm complete including dismantling the existing fillets all as specified and as directed.

Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Resecuring or easing and adjusting without taking down the shutter of size exc.1 Sqm and not exc.2 Sqm complete all as specified and directed .

Material and labour for greasing of existing steel window and door (of any type/ size) and making suitable for easy opening/ closing of shutters including cutting of jambs/ cills etc and making good the disturbed surfaces including necessary welding work etc complete all as specified and directed .

Supply and fix in repair for 20mm dia anodised aluminium alloy tubular curtain rod with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Taking down aluminium door, window and partition (of any type/ size) and refixing the same including necessary repairs such as straighting of edges, bringing at level with required cutting/ adjusting of any depression/ projection to the same opening complete all as directed.

Supply and fix in for anodized aluminium frame for window with one or more rebates, anodized aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, fittings such as suitable anodized aluminium locking type handle etc. and of 4mm thick sheet glass, tinted including taking down the exsting windows complete all as specified and as directed.

Supply and fix in for anodized aluminium frame for door of size 65 X 38mm with anodized aluminium push/ pull glazed type shutter with lock rail , top rail and stiles of size 84 x 44mm and size 115 X 44 for bottom rails and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium handles, including supply and fixing of 5.5mm thick sheet glass, tinted and minimum 4 Nos 100mm size aluminium hinges per shutter including taking down the existing doors complete all as specified and as directed.

Supply and fix in for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fix with screw to timber frame work as in shutter, shelves of cupboard including suitable beading to cover the exposed edges complete including dismantling the existing boarding all as specified and as directed.

Supply and fix butt hinges 50mm long cold rolled medium weight complete all as specified and as directed.

Supply and fix in 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Supply and fix in for 30mm witdth of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 40 mm dia cup board Knobs fixed with nut scrwed and washers mild steel , bright complete all as specified and directed .

S&F in magnetic catch in wooden frames including necessary fixtures complete all as specified and directed .

S & F in repair mild hinges for steel window including fixing nut bolts washer and necessary welding work if required to refix/radjust old hanging/fallen Ms window shutters in same opening at any height incl necessssary scafolding/ladders ( Tripple/double/single storey complete all as specified and directed.

Supply and fix in repair forbrass 2 levers mortice lock, vertical type, size 100mm complete all as specified and as directed.

Supply and fix in repair for aluminium (extruded section) body door closer hydraulically regulated designation No 3 universal type suitable for door shutter for a door shutter of 851 to 1000mm in width and weight of 61 to 80 Kg complete all as specified and directed

Supply and fix in repair 0.56mm thick aluminium plain sheet as in door, making 'U' shape as per site requirement complete all as specified and as directed.

M&L 10 mm thick cement plaster in CM (1:6) on lath fair faces of brick work incl finished even and smooth without using extra cement including taking down cement plaster , raking out joints, hacking for key, scrubbing down with water and preparation of the newly plastered surfaces and applying two coat of Oil bound distemper over a coat of cement primer etc complete all as specified and directed .

M&L GI wire netting of 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings etc. including all laps, cutting and waste fixed with tinned tacks of wire staples and rendering 18 mm thick in two layers (12mm + 6mm) externally on one side of lathing in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement mixed with and including water proofing compound @ 2% on top layer of 6mm thick, and applying two coats of cement based paint over a coat of cement primer ,including Demoliton of lathing plaster including batterns and plaster or chicken wirelating complete all as specified and directed .

Material and labour for 2nd class hard wood timber scantling, clean sawn as in frame work, fixed with nails including dismantling frame work timber scantling 40 Sqcm and over in section complete all as specified and as directed.

Supply and fix 2nd class HW plain fillets,square,rectangular, triangular in section exc 06 Sqcm but n exc 13 Sqcm wrought finished fixed with nail including dismantling the existing fillets complete all as specified and directed .

S & F Sheet glass 5.5 mm thick ordinary quality and glazing with rubber packing in square n exceeding 0.5 sqm in each plane after hacking out old broken glass( any thickness,size,quality or description) from aluminium frames or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix in anodized aluminium snap grid frame work with size of grid 605x605mm made out of aluminium ‘T’ section as main runner/ cross Tee and ‘L’ angle as wall angle for false ceiling including 4mm dia suspender, making position for light fittings, including provision of 6mm thick non asbestos fibre cement building, E-board (decorative) , fixed or laid/ inserted to timber/GI/ aluminium frame work with screw including dismantling of ceiling board of any type complete all as specified and as directed.

Supply and fix 6mm thick plywood, grade BWR type BB fixed with screws timber frame work in ceiling, flat or sloping all as specified including dismantling the existing ceiling boards of any type and directed

M & L for asbestos cement plain building boards , 6mm thick fixed to timber framework with screws in ceiling flat or slopping including dismantling the exising ceiling borads of any type including three coat of white wash all as specified and directed

Dismantling AC sheets corrugated or semi corrugated plain in roof coverings

S& F 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs , walls etc fixed with J type hook botls , all as specified and directed

Fixing only 6mm asbestos cement sheets corrugated or semi corrugated sheets in roofs, walls etc fixied with J type hook bolts all as specified and directed Note : Serviceable sheets obtained from item No 128 above can be used for fixing

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type hook as in roof, walls etc. with grade of zinc coating 275 including dismantling the existing sheets all as specified and directed

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling the exisiting sheets all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel steet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwes including dismantling of existing roof sheets in single storey bldgs all as specified.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling the ridge portion or valley gutter , etc all as specified and directed

M & L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions incl 1 mm wall care putty over three coat white wash including dismantling of ceiling board of any type complete all as specified

Material and labour for prepration of old plastered or unplastered surfaces and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint complete all as specified and directed.

Material and labour preparation of old decorated plastered surfaces and applying one coat of white washing on wall complete all as specified and as directed.

All as per serial item No.139.00 here-in-before but on ceiling.

S & F mild steel flat iron wind ties for for roof including secruing bolts, including necessary driling and similar works conformig to Fe-290 Gde E-165 including dismantling all as specified and directed

M & L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including dismatnling the existing steel members all as specified and directed

M&L for repair steel rolling shutters pull and push type or gear operated including cleaning the side of shutters suspension shafts and guide channels and greasing all the moving parts of rolling shutters and straightening of bolts and nuts as required for smooth functioning of shutters and re fixing the same including hood cover complete (any extra nuts and bolts required of appropriate size are to be supplied and fixed by contractor) complete all as specified and directed.

S & F in repair MS Helical Door springs 300mm long ordinary rat tail pattern including roller and roller palate complete all as specified and as directed.

s & F in repair floor door pring 150mm long stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed.

M/S A K MITRA

Evergreen Firm

KAILSON