Supply Installation Testing and Commissioning with 5(Five) Years Comprehensive Operation AND Maintenance of Permanent Decorative Street Light at Ambaji

Street Light (Double Arm): Supplying and erecting approved make of 9 to 10 m high decorative steel street lighting pole complete with double arm bracket, foundation, earthing and wiring, in accordance with the following requirements. The pole shaft shall be fabricated from mild steel structural tubes conforming to IS 1161:2014, minimum grade YSt-240 (higher grades YSt-310/355 may be used if required), with wall thickness not less than 3mm. The shaft shall consist of a base section (~140 mm dia) and top section (~76 mm dia), welded to a 350×350×16 mm base plate of IS 2062 steel. Tubes may be manufactured by ERW/HFIW, HFS or CDS processes as permitted by IS 1161. For ERW/HFIW. The entire structure shall be galvanized (IS 4759/IS 2629) with appropriate zinc coating (IS 6745 test), followed by epoxy zinc-phosphate primer (IS 1477 Part 2) and polyurethane paint to achieve ≥80 μm DFT. The pole shall be fitted with a decorative double arm bracket of 1 m outreach on each side, galvanized and painted as above, and structurally designed for wind speed as per IS 875 (Part 3):2015. An in-built lockable junction box shall be provided with 6–10 A MCB (IS/IEC 60898-1) and heavy-duty terminal connectors and internal wiring. Note: Attractive innovatve pole desing given by agency suring the preseantion & Demo before execute the work, final design by consultant/department

Street Light (Single Arm): Supplying and erecting approved make of 4 to 6 m high decorative steel street lighting pole complete with double arm bracket, foundation, earthing and wiring, in accordance with the following requirements. The pole shaft shall be fabricated from mild steel structural tubes conforming to IS 1161:2014, minimum grade YSt-240 (higher grades YSt-310/355 may be used if required), with wall thickness not less than 3mm. The shaft shall consist of a base section (~114 mm dia) and top section (~60 mm dia), welded to a 300×300×12 mm base plate of IS 2062 steel. Tubes may be manufactured by ERW/HFIW, HFS or CDS processes as permitted by IS 1161. For ERW/HFIW. The entire structure shall be galvanized (IS 4759/IS 2629) with appropriate zinc coating (IS 6745 test), followed by epoxy zinc-phosphate primer (IS 1477 Part 2) and polyurethane paint to achieve ≥80 μm DFT. The pole shall be fitted with a decorative double arm bracket of 1 m outreach on each side, galvanized and painted as above, and structurally designed for wind speed as per IS 875 (Part 3):2015. An in-built lockable junction box shall be provided with 6–10 A MCB (IS/IEC 60898-1) and heavy-duty terminal connectors and internal wiringNote: Attractive innovatve pole design given by agency suring the preseantion & Demo before execute the work, final design by consultant/department

Supplying and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 2 mtr.with suitable welded stiffener reducer and with lock nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. Suitable for side entry fitting brackets of following nos of arms. [B] Double Arm Bracket 2 Mtr. Note: Attractive innovatve design given by agency suring the preseantion & Demo before execute the work, final design by consultant/department

Providing and erecting street light pole bracket comprising main B Class MS pipe of 4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr Note: Attractive innovatve design given by agency suring the preseantion & Demo before execute the work, final design by consultant/department

Supply and erecting innvoative steet light centre top bracket on the pole with religious theme like Trishule, Kalash, Flag Size as per pole height 9 to 10 mtr. or any other theme base desing element on top ot the pole, size & desing will be approved by consultant, Note: Attractive innovatve design given by agency during the preseantion & Demo before execute the work, final design by consultant/department

Supply and erecting innvoative steet light centre top bracket on the pole with religious theme like Trishule, Kalash, Flag or as per pole height 4 to 6 mtr any other theme base desing element on top ot the pole, size & desing will be approved by consultant, Note: Attractive innovatve design given by agency during the preseantion & Demo before execute the work, final design by consultant/department

Supply and erecting innvoative steet light centre CNC bracket on the pole with reuqire mounting arragment with religious theme like Trishule, Kalash, Flag or any other theme base desing element on centre portion of the pole, size minimum 1 mtr. or as per site condtion desing will be change, back side use dot free homogenious light. Desing will be approved by consultant, Note: Attractive innovatve design given by agency during the preseantion & Demo before execute the work, final design by consultant/department

SITC of New, unique and innovative theme (Religious) based installations, selfie points with require civil, electrical & Require lighting as per the structural, Design, Construction and installation of Selfie Booth made up of Bricks/Stone of width 8 to 10 Ft and height sould be 6 to 8 ft, depth as per site condition, (Size maybbe defer depend of final design).LED lights appropriate to design should be used like Linear wall washer, pixel Light, RGB Flood Light, RGB Spot Light etc.. As per design requirement and mention in drawings with necessary M20 RCC foundation according to the design of structure, desing will be approved by consultant. Note: Attractive innovatve design given by agency during the preseantion & Demo before execute the work, final design by consultant/department

Providing 1:2:4 cement concrete foundation & 70 percentage PCC from bottom including excavation for the pole of size 60 x 60 x 150 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 9 & 10 mtr pole)

Providing 1:2:4 cement concrete foundation & 70 percentage PCC from bottom including excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved manner. ( for 4 & 6 mtr pole)

Supplying & erecting approved make street light box comprising CNC Processed robust housing made from single sheet multi folded with high grade powder coating ( RAL-7032 Structure finish as Standard) of IP-55 degree of Protection Gasket(PU Gasketing) of following size of Box.(ii) 300mm X 200 mm X 150 mm

Providing and erecting Three Phase IoT GSM/GPRS Central Control & Monitoring System (CCMS) Panel for Streetlights Smart Feeder Panel with 3 Phase GSM/GPRS CCMS Streetlight Controller with LCD Display (1 Nos.). Streetlight Controller with Individual each Phase Control (Energy Saving feature) and Spare relay facility. Streetlight Controller having 10 years of reserved battery for RTC. With 50 programmable schedule, month-wise offset settable facility, Astronomic sunrise/sunset time programming in-built for year long schedule. Operating Voltage @ 440 V AC with Over Voltage & Short Circuit protection. 2 hour Battery Back-up for Streetlight Controller. Panel to have 1 Nos. of 3 Phase – Class 1 Energy Meter for Energy & Fault monitoring on CCMS Web Dashboard. Panel consisting of 3 Nos. of 3 Pole Contactors (3 x 18 A), 7 Nos. of 1 Pole Miniature Circuit Breakers (32 Amp.) for Bypass, Input / Output supply functionalities, 1 Nos. of 4 Pole Earth leakage circuit breaker for safety protection. Standard lock & key facility for Panel security. Door Switch for unauthorized access & tamper detection. Accelerometer for panel movement detection & tamper alerts. Suitable amount of Wires, Connectors, Terminal Blocks included in Panel. 16/18 gauge M S with industrial exterior powder coated PP with seven tank process RAL 7035 All weather-proof Enclosure Panel having IP65 rating. Waterproof Glands & Grounding Stand included. Dedicated IoT communication GSM/GPRS SIM Card (with minimum 5 years of recharge) for Wireless Communication with CCMS Web Dashboard. 5 Years Data Hosting & Server Charges to be included with CCMS Web Dashboard. Load status, Live analytics, Energy Meter monitoring (Parameters such as kW, kWH, PF, I, V), comparative analytics, reports generation facility. Fault detection on web dashboard. GIS Mapping of CCMS Panel on Web Dashboard. Secured MQTT Communication for Cloud. Includes Android & iOS Mobile Application. Local communication facility via Mobile Application in case of GPRS connectivity failure.

EARTHING for Pole : Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire.

For using salt and charcoal / coke as required for pipe type earthing.

EARTHING : Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. (1) For electrical installation up to 440 V Length of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable, (A)50 mm outer dia

Providing & erecting 16 gauge HGS conduit pipe (as per IS) painted black surface/concealed of following size complete to be erected on/in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following (Nominal Bore) dia of pipes, in approved manner as directed, 38/40 mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding power supply by making up to following size of holes at both ends complete. (B) Up to 150 mm bore dia

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed.e) 1.50 Sq.mm 3 core round PVC sheathed

Cable for STreet Light:Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (Make -Havells/Polycab/RRKable/Finolex/Anchor) (C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables, A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A) 3 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (Make -Havells/Polycab/RRKable/Finolex/Anchor) (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(C) 2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(D) 35/50 Sq.mm.

(C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

SP MCB : (1) Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with operating mechanism A.C.23 duty confirming to IS for (C)100-125A , Cat- III