Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
27 Nov 2026, 3:30 pm5d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
Executive Engineer D W and S Mech Div Gumla
Supply Installation Testing and Commissioning of centrifugal pump set having dishcharge 65 m3hr and head 90 meter and other electro mechanical allied works at Clear Water Pumping Plant for kuru Rural Water Supply Scheme
2026_DWSD_121323_1
E-QUOTATION - 13/2026-27 2nd Call
Open Tender
Pumps/Motors
Empanelment
90 days
GUMLA
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
21 Nov 2026
21 Nov 2026
28 Nov 2026
21 Nov 2026
27 Nov 2026
21 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying, installation and commissioning of HSC Centrifugal pump set (make: Kirloskar / WPIL/ Mather & Platt) as per IS:5120, capable for discharging 65M3/Hrs against a head of 90 M, consisting of stainless steel impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (IE3) TEFC squirrel cage induction motor having 15% more BHP than that of pump, operating on 1400-1500 rpm, 415V, 3 PH, 50 HZ [make: Kirloskar /ABB/CGL/Marathon] all complete with pressure gauge, required size of sluice valve and non- return valve standard fitting, strainers, reducer, foot valve,common header, nuts & bolts, packings, fitting & fixing, labour & technician etc. including transportation, loading & unloading charge etc. all complete job as per site requirement and direction of E/I.
Discharging – 65 m³/hr and Head –90 M | 2 | Job | - | - |
| 2 | Cost towards supplying, Installation, testing & commissioning of free standing type floor mounted cubical LT motor control panel fabricated with MS sheet of suitable gauge and size duly painted with two coats of red oxide primer comprising of 200 Amp, 440V copper busbar arrangement 4 pole consisting of following accessories:
(i) 200 Amp MCCB – 1 No. (Incoming feeder)
(ii) 160 Amp MCCB – 02Nos (outgoing feeder).
(iii) 160 Amp MCCB – 01No. (As spare)
(iv) 32 Amp MCB -1 No. for lighting load and other utility load.
(v)Fully Automatic Star Delta (FASD) Starter (L&K/Havell’s/Siemen’s/Schneider/BCH make) suitable for Above pump set or more etc.- 2 Nos.
(vi) 3-phase Digital display Voltmeter & Amp Meter -2 Sets, Phase indicating light R-Y-B -3 Nos.
(vii) Copper Bus Bar- 04 Pole 200 Amp, 415V Copper strip bus bar enclosed in MS sheet along with overload relay, Dry Run Protection, Motor protection device (MPD), Proper power & control wiring inside by suitable size of copper conductor and wires etc. all complete set including transportation and fitting & mounting charges at P/Plant. | 1 | Job | - | - |
| 3 | Dismantling of old Foundation and removing the residuals out of the pumping plant and making of new PCC foundation 4.5’x3’x2.5’ size and MS joint 4’’x6” -02 Nos with supplying all mortar materials and foundation bolts 06 Nos with all labour tools and tackles loading unloading with alignment leveling and jointing as per P.W.D specification (1:2:4) | 2 | Job | - | - |
| 4 | Cost of supply & laying, commissioning of 3 core 25 mm² copper conductor cable 1.1 KV grade PVC insulated and PVC sheathed unarmored cable from panel to starter to motor (for air blower) with lugs socketing. Make- Polycab / Havell’s /KEI, ISI marked. | 50 | Mtrs | - | - |
| 5 | Cost towards complete overhauling of 75 kva,3 phase, 50 hz servo controlled voltage stabilizer by replacing its damaged parts such as operating motors,control card,R.C. unit,control transformer,neon lamp,pot switch,voltmeter,ammeter,micro switches DPDT & SPDT etc. all complete including labour,tools and technician cost. | 1 | Job | - | - |
| 6 | Supply and fitting 320 amp TPN switch fuse unit-01 no. before stabilizer on the wall, including required materials such as clamp, nut, bolts, etc, for the job. make – L&T/ Havell’s /C&S any Reputed make ISI Marked. | 1 | No | - | - |
| 7 | Providing and fixing 320 Amp. TPN on/off load change over switch with side handle operation, in sheet enclosure with allied materials including drilling hole in metal board,making connection.earthing the body etc as required. Make- Havells/ BCH/ C&S or ISI marked. | 1 | Job | - | - |
| 8 | Supplying and fitting of lightening arrester suitable for building protection with Earthing electrode, Earthing Compound copper wires, and earth works etc.All complete job. | 1 | Set | - | - |
| 9 | Chemical earthing 10 feet and 80mm hole size with electrode and chemical compound etc. with watering pipe and locking arrangements including soldering, riveting, jointing G.I. flat strip 50mmX 6mm to all equipments or as per direction of E/I | 1 | Job | - | - |
| 10 | Cost towards making earthing connection from earth pit to change over, stabilizer, panel, starter, motor with 6 SWG G.I wire. | 200 | Mtrs | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
tc.pdf
Tender Documents • 0.22 MB
BOQ_164141.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .