Kerala

Technical BO

Works

Repair and Maintenance Works

DBUPS Angadikkal in Aranmula group -Repair and maintenance to the school building in connection with school opening for the academic year 2026-27

Travancore Devaswom Board

Mavelikkara | Alappuzha, Kerala

Amount: ₹8.1 LCloses: 11 May 2026Closed

Timeline

Published7 May 2026
Closed11 May 2026
Technical Evaluation—
Award—

Tender Value

₹8.1 L

EMD Value

₹20,300

Closing Date

11 May 2026, 11:00 amClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER, TDB, MAVELIKKARA

Address

OFFICE OF THE EXECUTIVE ENGINEER, TDB, MAVELIKKARA-690101

Work Description

DBUPS Angadikkal in Aranmula group -Repair and maintenance to the school building in connection with school opening for the academic year 2026-27

Tender Information

Tender ID

2026_TDB_849491_1

Reference Number

EEM/ET-03/2026-27

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Period of Work

20 days

Location

Mavelikkara

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical/Finance

RequiredSCANNED COPY OF REGISTERED CONTRACTOR LICENSE AND GST REGISTRATION FORM (.pdf)

RequiredPRELIMINARY AGREEMENT (.pdf)

RequiredQUOTED SCHEDULE (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,947

EMD Fee Amount

₹20,300

Important Dates

Last Activity

12 May 2026

Published

7 May 2026

Bid Opening

12 May 2026

Download Starts

7 May 2026

Download Ends

11 May 2026

Submission Starts

7 May 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (53 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix I - Annual maintenance to the School building, providing Lean roof to the school building front side to prevent water from falling on the verandah during the rain and certain urgent works.
1.01	Labour engaged for attending necessary repairs and maintenance to Wooden Windows and doors -Carpenter 2nd class	-	each	1,197.94	-
1.02	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	-	M2	56.51	-
1.03	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	-	M3	9,235.97	-
1.04	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	-	M2	1,776.49	-
1.05	Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm	-	M2	1,839.01	-
1.06	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	-	kg	116.69	-
1.07	Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	-	kg	182.51	-
1.08	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	-	M2	842.14	-
1.09	Water washing and cleaning the old painted surface with pressure pump including hire charges of pump etc complete	-	M2	6.23	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.01 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.58 MB

Work Item Documents

priliminaryagreement.pdf

Tender Documents • 0.32 MB

BOQ_1435503.xls

BOQ • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Appendix I - Annual maintenance to the School building, providing Lean roof to the school building front side to prevent water from falling on the verandah during the rain and certain urgent works.
1.01	Labour engaged for attending necessary repairs and maintenance to Wooden Windows and doors -Carpenter 2nd class	-	each	1,197.94	-
1.02	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	-	M2	56.51	-
1.03	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	-	M3	9,235.97	-
1.04	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.	-	M2	1,776.49	-
1.05	Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm	-	M2	1,839.01	-
1.06	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	-	kg	116.69	-
1.07	Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	-	kg	182.51	-
1.08	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	-	M2	842.14	-
1.09	Water washing and cleaning the old painted surface with pressure pump including hire charges of pump etc complete	-	M2	6.23	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Appendix I - Annual maintenance to the School building, providing Lean roof to the school building front side to prevent water from falling on the verandah during the rain and certain urgent works.

1.01

Labour engaged for attending necessary repairs and maintenance to Wooden Windows and doors -Carpenter 2nd class

each

1,197.94

1.02

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

56.51

1.03

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

9,235.97

1.04

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

1,776.49

1.05

Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

1,839.01

1.06

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

116.69

1.07

Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

182.51

1.08

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

842.14

1.09

Water washing and cleaning the old painted surface with pressure pump including hire charges of pump etc complete

6.23