Loading
Loading…
Loading…
Tender Value
₹63.8 L
EMD Value
₹1.2 L
Closing Date
1 Aug 2026, 5:00 pm6d left
Executive Engineer
Jal Shakti Division Kullu
SH Recovery and reconstruction of water supply schemes Dugilag Peej Mashana Fallan and L/O habitation in GP Choparsa Under PDNA
2026_HPIPH_139747_1
4553-4603 Choparsa
Open Tender
Civil Works
Item Rate
60 days
Lug Valley
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,000
Executive Engineer
₹1.2 L
23 Jul 2026
23 Jul 2026
3 Aug 2026
23 Jul 2026
1 Aug 2026
23 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. | |||||
| 2Providing, laying, jointing, lowering, aligning, fixing, testing and commissioning of G.I. Pipes conforming to IS:1239 (Part-I & Part-II), latest revision, ISI/BIS marked, of specified diameter and class (Light/Medium/Heavy) complete with all specials, G.I. fittings, sockets, bends, tees, reducers, unions, nipples, supports, hangers, nuts, bolts, washers, jointing materials including PTFE tape/hemp and approved jointing compound, cutting, threading, screwing, fabrication, making threaded joints, lowering in position, proper alignment, anchoring, hydraulic pressure testing, flushing, disinfection, trial run and commissioning, including all labour, tools & plants, machinery, loading, unloading, carriage, handling, storage, all leads and lifts, complete in all respects as per CPHEEO Manual, relevant IS Specifications, Departmental Specifications and the directions of the Engineer-in-Charge. | |||||
| 2.01 | 15 mm dia (Light Class) (S/S) | 800 | Rmt | - | - |
| 2.02 | 20 mm dia (Light Class) (S/S) | 3,260 | Rmt | - | - |
| 2.03 | 25 mm dia (Light Class) (S/S) | 3,635 | Rmt | - | - |
| 2.04 | 32 mm dia (Light Class) (S/S) | 4,390 | Rmt | - | - |
| 2.05 | 40 mm dia (Light Class) (S/S) | 2,400 | Rmt | - | - |
| 2.06 | 50 mm dia (Light Class) (S/S) | 900 | Rmt | - | - |
| 2.07 | 65 mm dia (Light Class) (S/S) | 600 | Rmt | - | - |
| 2.08 | 65 mm dia (Medium Class) (P/E) | 1,000 | Rmt | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
FORMSIX.pdf
Tender Documents • 0.40 MB
FORMEIGHT.pdf
Tender Documents • 1.43 MB
BOQ_207155.xls
BOQ • 0.25 MB
TERMANDCONDITION.pdf
Tender Documents • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].