PERIODICAL SERVICES TO CERTAIN BUILDINGS AND REPAIRS TO JOINERY SANITORY FITTINGS FLOORING PLASTERING REPAIRS TO ROOF SLAB AND ROOFING WORK IN POCKET D AND E UNDER GE AF TRIVANDRUM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for vitrified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Vitrified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exc 1.00 sqm in floors, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor sub base for receiving of floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in M 1:4, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint over a coat of primer complete all as specified and directed.

M&L one coat of exterior emulsion weather coat paint over the old wall surface including the preparation of the surfaces upto height 12mtr complete all as specified and directed.

M&L one coat of exterior emulsion weather coat paint over the old wall surface including the preparation of the surfaces for height more than 12 Mtr and upto 20 mtr which required necessary scaffolding etc. complete all as specified and directed.

M&L one coat of exterior emulsion weather coat terracotta paint over wall or floor/ MP tiles surfaces including the preparation of the surfaces, complete all as specified and directed.

M&L for preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new treated of ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old treated wall surface and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old treated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old treated surfaces of walls and applying two coat of oil emulsion distemper complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for 10 mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10 CM width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster including existing roof treatment and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc. and removing rubbish to a distance exc 250m and not exc 500m all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

Supply only liquid waterproofing compound (ISI grade only)

M&L for cleaning the surface and applying FOSROC Nitoproof 725 or equivalent product (minimum 0.8mm dry film thickness) over a priming coat of Nitoproof WB primer or equivalent product and apply Polyurethane water proofing coating on prepared concrete surface of roof slab & upto 300mm of parapets and crumple joints including junction of roof and parapet wall, complete all as specified and directed by Engineer -in-Charge. Make of chemical: The equivalent product of Pidilite Industries Ltd/Dr Fixit/Sico can be used in lieu of FOSROC subject to approval of GE in writing before incorporating in the work.

Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed.

M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed.

M&L for Roof tiles Mangalore pattern inter locking at side joints, laid dry, complete all as specified and directed.

All as per item No:42 above but except tiles

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6.

All as per item No: 44 above but except tiles

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc., complete all as specified and directed

M&L for 5mm thick WPC wall panelling colour WPC sheet inclusive of solvent cement & necessary frame work as per specifications and all as per directed by Engineer-in-Charge.

M&L for providing and fixing 10 mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40 mm long complete all as specified

M&L Perforated particle board/ tiles for insulation and acoustic purposes, 60x60 cm in size,12mm thick fixed with nails to timber frame work or with staples on snap grid, complete all as specified

M&L powder coated anodised aluminium snap grid frame work for false ceiling grid size 605x605mm all as specified

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down Chowkat or frames not exc. 1.5 sq. m each (without taking off shutters from the frames)

Taking down Chowkat or frames exc. 1.5 sq. m and n exc4.0 sqm each (without taking off shutters from the frames)

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 2.0 sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, and refixing after resecuring, making good and replacing hinges, pivot etc. as required in the same opening complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators not exc 1.5 Sqm each (without taking off shutters fro the frames) complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators exc 1.5 Sqm & not exc 4.0 Sqm each (without taking off shutters fro the frames) complete all as specified and directed.

Taking down aluminium shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

S& F power coated anodised aluminium frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc. complete all as specified .

S& F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and as shown on TD drawings.

S& F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and as shown on TD drawings.

S& F powder coated sliding window with three track shutters including (two glass and one wire mesh) powder coated anodised aluminium frame work and glazing clips of Jindal sections No. 20671 weight of section is 0.699kg/RM or equivalent, complete all as specified and as shown on TD drawings.

S & F powder coated aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles, hinges anodised aluminium snap beading screws etc. complete all as specified and directed and as shown on TD drawings.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Rate inclusive of frosted Glass pane or PVC sheet which is required) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Two track two panels sliding window above 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 2.50 sqm. upto 4.00 sqm.) comprising of uPVC multichambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ((Rate inclusive of Glass pane). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Rate inclusive of Glass pane and wire mesh ) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints including repairs to distrubed existing surfaces complete all as specified and directed.

S&F mild steel bands, straps, hooks and pintle hinges large hasps and staples chins, clamps, purlins etc. confirming Fe 290 Gde -E-165 complete all as specified and directed.

S & F second class hardwood plain, framed, panelled shutters of 40 mm thick (any number of panels), with panels of timber flat on both sides (feather edges) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S & F second class hardwood glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats complete all as specified and directed.

S & F second class hardwood glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers; edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats for windows, ventilators, etc. provided with stiles and rails complete all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and directed .

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 75 mm long complete all as specified and directed.

S & F 100 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

S & F in repair alum mum extruded section body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for aluminium doors openable in two directions complete all as specified and directed.

S&F in repairs aluminium body door closer, hydraulically regulated, designation No 2, universal type, suitable for door shutter of 701 to 850 mm in with and of weight between 36 to 60 Kg complete all as specified and directed.

S&F 25mm dia decorative curtain rods powder coated MS of approved pattern / colour / design of including decorative end fittings , brackets etc. fixed in repairs.

S&F in repairs 5mm thick glass mirror with double coat for protection and longevity, grounded edges for safety and silver plating on the back for better reflection of size 700x500mm, complete all as specified and directed.

S&F in repair floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel pring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed.

S&F in repair floor door stopper of brass body and tongue, with hard drawn steel pring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed.

S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperture 1.4 mm, fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs magnetic door stopper for cupboard, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section and size 150 mm long complete all as specified and directed.

S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed.

S & F in repairs 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminium all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F plain sheet glass 3 mm thick ordinary quality and glazing with oil putty/beading etc. n.exc 0.50 Sqm each all as specified including removal of old broken glass

S&F figured glass 3 mm thick pin head type and glazing with oil putty/beading in squares or any size shape and size fixed to at any sections complete all as specified and directed.

S&F plain sheet glass 4 mm thick ordinary quality and glazing with oil putty/beading etc. n.exc 0.50 Sqm each all as specified including removal of old broken glass

S&F plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty/beading etc. exc 0.50 Sqm each all as specified including removal of old broken glass

S & F in repairs Brass, 2 lever, locks, drawer, grade-I of 50 mm size complete all as specified and directed.

S & F in repairs mild steel 2 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

S & F in repairs mild steel 4 lever mortice lock, vertical type 100 mm size complete all as specified and directed.

S & F in repairs casement stays of size 250 mm with hinged joint and two plates, with studs complete all as specified and directed.

Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

M & L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work etc. complete all as specified and directed.

M & L 18/19 mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupboards, wardrobes, kitchen covered cabinet etc. including teak wood beading around the plywood/ teakwood lipping shall be finished with two coats of French polish.

S & F in repairs butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F in repairs Stainless steel peg rail having 6 Nos hook for hanging cloth complete all as specified and directed.

S&F in repairs aluminium plate type-II Gate and shutter, hooks and eyes 150mm complete all as specified and directed.

S&F in repairs brass wire type-I Gate and shutter, hooks and eyes 150mm complete all as specified and directed.

S&F in repairs 75mm long half folded auto hinges complete all as specified and directed.

S&F in repairs mortice lock of 4 lever 100 mm brass complete all as specified and directed.

S&F in repairs venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc. all as specified and directed.

S&F in repairs bathroom cabinet with mirror 250x400 mm size, including removal of existing cabinet complete all as specified and directed.

S&F in repair plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approved complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 0.90 x 0.60m and thickness of sheet 1mm complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 1.20 x 0.90m and thickness of sheet 1mm complete all as specified and directed.

S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed.

S&F in repairs fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Self-closing pillar taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed to 15mm bore dia pipe complete all as specified and directed.

S&F in repairs Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to pipe complete all as specified and directed.

S&F in repairs Stop valve/angle valves, cast copper alloy, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs glass corner shelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

S& F in repairs health faucet, CP with flexible arm for pipe 15mm bore dia complete all as specified and directed by Engr-in-Charge.

S& F in repairs basin mixer with 450 mm braided connection pipe complete all as specified and directed by Engr-in-Charge. Make : Jaquar/CERA/Prayag or equivalent

S& F in repairs brass chromium plated 3 in 1 wall mixer with the provision of overhead shower and telephonic shower arrangement complete all as specified and directed by Engr-in-Charge. Make : Jaquar/CERA/Prayag or equivalent

S&F in repairs hand shower 100 mm dia round shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system and easy flex tube in chrome finish 1.5m long with Nuts compete all as specified and directed.

S&F in repairs Grating doom 100 mm dia with waste hole of PTMT (minimum weight 40 grms) complete all as specified and directed.

S&F in repairs 32 mm dia waste pipe suitable for wash hand basin and sink complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull or lever, if any complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs Vitreous China wash basin of size 630x450mm, white, pedestal type excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs 32 mm dia waste coupling of PTMT half or full thread suitable for kitchen sink or wash hand basin (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) including connect to outgoing pipe and flush pipe (excluding fixing bolts, flushing cistern) complete all as specified and directed by Engr-in-Charge.

S&F Cascade type water closet with flushing cistern including seat cover and all necessity connections etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repairs straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed by Engr-in-Charge.

S&F in repairs toilet paper holder, brass, CP brass fitted to wall complete all as specified and directed by Engr-in-Charge. Make: Jaquar/CERA/Prayag or equivalent

S&F in repairs Towel rack with Lower Hanger (stainless steel) with hooks of size 600mmx200mm complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repairs 20mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs 32mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe

S&F in repairs 110mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc. and including necessary scaffolding where is required, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc. including necessary scaffolding where is required, complete all as specified and directed.

Removing bib taps, stop cocks, pillar taps, angle cock etc. and refixing in the same position after repairs/replacement of washer/plunger etc. for arresting leakages complete all as specified and directed. Note: Rate of washer/Plunger etc. shall be deemed to be included in contractor quoted rate.

S&F in repairs spindle for stop cock complete all as specified and directed.

Cleaning of pipes of any dia after opening of bib taps, stop cock, angle cock, pillar taps and gate valve etc. and refixing in same position after cleaning of pipes complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 1000 ltr including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 500 ltr including locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore complete all as specified and directed.

S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks of capacity exc 500 and not exc 1000 ltrs and from mouth of circulation pipes etc. complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks of capacity exc 250 and not exc 500 ltrs and from mouth of circulation pipes etc. complete all as specified and directed.

S&F in repairs ball brass valve, high pressure, with polyethene float and fly nut complete, screwed for iron pipe of brass ferrule of 25mm dia bore complete all as specified and directed.

Dismantling water tanks and removing to store exc 250 ltr and not exc 500 ltr complete all as specified and directed.

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 ltr and not exc 1000 ltr complete all as specified and directed.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1

Repairs only to flush pipe, soil waste pipe of WC for arresting leakage by providing bushes, washers, white cement, putty etc. complete all as specified and directed.

Arresting leakage from joints between sink and granite slab by providing white cement, putty, M Seal etc. complete all as specified and directed.

Repairs only to high/low level flushing cistern and arresting leakage of its internal fittings/washers complete all as specified and directed.

S&F in repairs internal fittings such as ball valve and float for flushing cistern complete all as specified and directed.

S&F in repairs complete set of internal fittings of Cascade type EWC for arresting leakage complete all as specified and directed.

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash on wall surfaces complete all as specified and directed.

M&L for preparing old plastered decorated surface of ceiling and applying one coat of white wash on ceiling all as specified and directed

M&L preparation of old decorated wooden surface of any description over 10 CM width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for one coat of Plastic emulsion surfaces of any description over 10cm girth or width, not otherwise describe including clearing and preparing the surfaces of old works etc. complete all as specified and directed

M&L for French polishing one or more coat on old decorated surfaces of any description, any width or girth including clearing and preparing the surfaces of old works etc. complete all as specified and directed

M&L preparation of treated surfaces of wall and applying one coat of cement base paint on walls all as specified and directed

Obliterating old writing of any description, not exc 0.1 Sqm with paint to match existing work complete all as specified.

M&L for removing weed growth including complete removal of penetrated root parts and applying standard anti weed solution as per manufacturer's instruction any position upto and including four storied building on wall, roof etc. complete all as specified and directed.

M&L for 3mm wall care putty on ceiling including complete removal of existing treatment, complete all as specified and directed.

Complete removal of existing treatment on walls with wire brush and wash down with water including stopping to holes and surface as smooth complete all as specified and directed.

M&L for 3mm thick wall care putty on wall, surface as even and smooth finish complete all as specified and directed.

M&L for one coat of primer with alkali resistant primer paint on plastered wall surfaces complete all as specified and directed.

M&L for preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

ARCHITRAVE CONSTRUCTIONS

SCION ENTERPRISES

DEFT GROUP ELECTROMECHANICAL