Microscope with Integrated Camera

Amount

Microscope with Integrated Camera

Technical Specifications • LED Illumination with continuous intensity adjustment (Life of more than 20000 Hrs) • 5 fold nosepiece Objectives should be inward inclined, • Objectives –Achromat 4x/0.10,10x/0.25, 20x0.40,40x/0.65,100x/1.25 OIL • 30 degree binocular tube (IPD 52 - 75 mm). • Eyepiece pair – 10x/ 20 FN with eyepiece locking screw, Foldable Eye guards • Condenser : Abbe Condenser 0.9Dry/1.25 Oil • Low position and self adjusting focusing mechanism. 300 microns per fine focus rotation. Calibrated in 3 microns Increments . • Hard anodized and rack less stage • One hand slide loading, 26x76mm stage travel • Antimicrobial treated with Proper Documents • Integrated vertical handle for easy lifting and storage. • Integrated cord warping facility. • Machine have auto cut off facility after 2 hours if not in use • Upgradable for phase contrast, dark field and fluorescence with minimum 3 filter block/turret • Point counting and non point counting mechanical stages • Hard anodized stage surface • Brake for securing rotation location Camera with Software • Camera should be integrated • Camera situated between binocular tube and objective. • HD Mode for Live image 1920x1080 directly to an HD display or for image capture to SD card (No PC required) • PC mode for use with PC and Imaging Software • Network mode for direct connection using Ethernet cable • Light distribution: 50% visual / 50% camera • Interfaces: USB2, HDMI, Ethernet Maximum Image size 5.0 M pixel (2592 x 1944) Complete camera kit contains Camera Module, USB2 cable 1.8m, HDMI cable 2.5m, imaging software for basic image capture and simple measuring and annotation applications, • Branded PC : 4GB RAM, 1TB HDD, 1 GB graphics card, i5 64 bit processor , • Windows 10 (Original) • Microscope camera and software should be same make.

ANTS Life Care Solutions LLP

HALLMARK MECHATRONICS