Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC H NO 19 6 243 1 NGO S COLONY SHIV NAGAR NORTH BIDAR 585401 | BIDAR | KARNATAKA | 585401 | L1 | Accepted-AOC L1 and reasonable | |
| 2 | L2₹37.6 L+₹24,843 (0.66%)Rejected-AOC | L2 | Rejected-AOC Not L1 | |
| 3 | L3₹37.9 L+₹50,460 (1.35%)Rejected-AOC | L3 | Rejected-AOC Not L1 | |
| 4 | L4₹38.2 L+₹77,904 (2.08%)Rejected-AOC | L4 | Rejected-AOC Not L1 | |
| 5 | L5₹39.1 L+₹1.7 L (4.60%)Rejected-AOC | L5 | Rejected-AOC Not L1 |
| Sl No | Description | Qty | Unit | Mr Madhusudhan Kotarki L2 | M/s.Santosh Kotarki L4 | AMAR CONSTRUCTION L5 | Siddique constructions L6 | M/s S.L.Chablani L3 | NAYANA CONSTRUCTIONS L7 | RAMESH CONSTRUCTION COMPANY L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.00Schedules of Works | ||||||||||
| 1.00 | Removing / Taking out of sand (fine aggregate) and saw dust from small arms range / firing butt, segregating service materials of sand and raw dust by sieving and stacking aside for re-use complete all as specifed and as directed by Engineer-in-Charge.
Note: Removal of sand and saw dust mix where required will be measured and paid for separately under respective item. | 360 | CUBIC METRE | 240 ₹86,400 Lowest | 350 ₹1,26,000 | 250 ₹90,000 | 800 ₹2,88,000 | 310 ₹1,11,600 | 255 ₹91,800 | 300 ₹1,08,000 |
| 2.00 | Material & Labour, for forming traverse/bunds with compacted mix of saw and sand (approved sand) in ratio of 1:1 ratio i.e., one part of sand and one part of saw dust; spread, levelled, compacted and finishing surface, complete all as directed by Engineer-in-Charge. | 260 | CUBIC METRE | 1,500 ₹3,90,000 Lowest | 1,650 ₹4,29,000 | 1,550 ₹4,03,000 | 2,400 ₹6,24,000 | 1,520 ₹3,95,200 | 1,500 ₹3,90,000 Lowest | 1,500 ₹3,90,000 Lowest |
| 3.00 | All as per Ser Item No. 02 here-in-above, but except sand and saw dust complete all as specified and as directed.
Note- (i) Sand and Saw dust obtained from Sl item No.01 shall be re-used in rate of 1:1 ie., one part of sand and one part of saw dust. | 100 | CUBIC METRE | 245 ₹24,500 | 180 ₹18,000 Lowest | 250 ₹25,000 | 250 ₹25,000 | 205 ₹20,500 | 240 ₹24,000 | 200 ₹20,000 |
| 4.00 | Removal of sand and saw dust mix obtained from Ser item No.01 here-in-above to a distance exc 50m but not exc 1.5 Km and depositing where directed of a level not exc 1.5m above the starting point complete all as specified and as directed. | 260 | CUBIC METRE | 185 ₹48,100 | 150 ₹39,000 | 180 ₹46,800 | 99 ₹25,740 Lowest | 160 ₹41,600 | 200 ₹52,000 | 160 ₹41,600 |
| 5.00 | Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., complete all as specified and as directed.. | 300 | SQUARE METRE | 50 ₹15,000 | 30 ₹9,000 Lowest | 55 ₹16,500 | 96 ₹28,800 | 37 ₹11,100 | 50 ₹15,000 | 36 ₹10,800 |
| 6.00 | Demolition of brickwork or stone/ PCC block masonry, built in cement mortar or cement lime mortar complete all as specified and as directed. | 40 | CUBIC METRE | 510 ₹20,400 | 500 ₹20,000 | 500 ₹20,000 | 350 ₹14,000 Lowest | 455 ₹18,200 | 450 ₹18,000 | 450 ₹18,000 |
| 7.00 | Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed. | 27.2 | 10 SQUARE METRE | 490 ₹13,328 | 520 ₹14,144 | 500 ₹13,600 | 400 ₹10,880 Lowest | 450 ₹12,240 | 550 ₹14,960 | 450 ₹12,240 |
| 8.00 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (unreinforced) (below or above ground level) complete all as specified and as directed. | 20 | CUBIC METRE | 640 ₹12,800 | 650 ₹13,000 | 650 ₹13,000 | 700 ₹14,000 | 640 ₹12,800 | 600 ₹12,000 Lowest | 630 ₹12,600 |
| 9.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. | 10 | QUINTAL | 390 ₹3,900 Lowest | 500 ₹5,000 | 400 ₹4,000 | 600 ₹6,000 | 470 ₹4,700 | 450 ₹4,500 | 450 ₹4,500 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
18 Jul 2025, 6:00 pmClosed
GE (AF) Bidar
Garrison Engineer (Air Force) Bidar, Military Engineer Services, Air Force Station Bidar, Bidar 585401
REPAIRS, MAINT OF SECURITY FENCING, SECURITY WALL, GATES AND CONNECTED WORKS AT AF STATION BIDAR
2025_MES_715856_1
GE(AF)/BID/TOKEN/03 OF 2025-2026 8150
Open Tender
Civil Works
Item Rate
270 days
Bidar
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Bidar
₹80,000
Yes
24 Sept 2025
20 Jun 2025
25 Jul 2025
20 Jun 2025
18 Jul 2025
4 Jul 2025
20 Jun 2025 - 27 Jun 2025
Amount
Schedules of Works
Removing / Taking out of sand (fine aggregate) and saw dust from small arms range / firing butt, segregating service materials of sand and raw dust by sieving and stacking aside for re-use complete all as specifed and as directed by Engineer-in-Charge. Note: Removal of sand and saw dust mix where required will be measured and paid for separately under respective item.
Material & Labour, for forming traverse/bunds with compacted mix of saw and sand (approved sand) in ratio of 1:1 ratio i.e., one part of sand and one part of saw dust; spread, levelled, compacted and finishing surface, complete all as directed by Engineer-in-Charge.
All as per Ser Item No. 02 here-in-above, but except sand and saw dust complete all as specified and as directed. Note- (i) Sand and Saw dust obtained from Sl item No.01 shall be re-used in rate of 1:1 ie., one part of sand and one part of saw dust.
Removal of sand and saw dust mix obtained from Ser item No.01 here-in-above to a distance exc 50m but not exc 1.5 Km and depositing where directed of a level not exc 1.5m above the starting point complete all as specified and as directed.
Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., complete all as specified and as directed..
Demolition of brickwork or stone/ PCC block masonry, built in cement mortar or cement lime mortar complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (unreinforced) (below or above ground level) complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling posts or struts (Steel or RCC) any section of security/cattle fencing including taking out embedded portion and making good disturbed ground, posts embedded in Concret complete all as specified and as directed.
Dismantling of wire mesh chain link fencing any type complete all as specified and as directed..
Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Material and labour for mild steel Posts and Struts in fencing, including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets, bolts and round bars (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Supply only Chain link MS galvanized fencing of any size or type complete all as specified and as directed.
Fixing only Chain link fencing including lines wire, any mesh, ize and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed.
Taking down unserviceable barbed wire fencing, providing material and labour for, barbed wire fencing with Galvanised 2 strand steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 75mm spacing and type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.
Taking down and re-fixing of galvanized 2 strand steel barbed wire fixing to any type of standard rails straining bolts including securing or tyting and crossing with the provision of galvanized MS wire staples or steel pins etc complete all as specified and as directed.
Supply and fixing in Repairs for concertina coil of 600mm dia fixed to angle iron brackets with necessary accessories like straining wires, fixing clips etc complete all as specified and as directed.
Supply and Fixing in repairs Stainless steel railing 304 grade of tubular, square, rectangular pipes including all fittings fixed with staircase, floors with complete all as specified and as directed. (Make- Jindal raw Material or equivalent)
Welding in Repairs exc 25mm but not exc 50mm in length and thickness of metal to be welded n.exc 6mm complete all as specified and as directed.
Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:4 complete all as specified.
All as per Serial item No. 21 here-in-above, but except PCC blcocks. Note : - Serviceable PCC blocks obtained from Sl item No.06 shall be re-used under this item.
Material and Labour for Plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.
Material and Labour for plain cement concrete 100mm thick 1:4:8 type D2, (40mm graded stone aggregate as in sub base complete all as specified and as directed.
Material and Labour for Plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and as directed.
Material and Labour Granite (of any type) 18-20 mm thick, work table, rubbed and polished in steps, jambs, piller, window cills, cooking platforms and like including pointing in white cement (1:2),with admixtures of pigment to match with shade of granite complete all as specified and as directed.
Material and Labour for Non-skid heavy duty tile 400 mm x 400 mm x 10 mm thick coloured jointed free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match and including provision 15mm thick screed bed layer in CM (1:4) etc complete all as specified and as directed. (Make: Kajaria, Johnson, Somany, Orient Bell or equivalent)
Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for Preparation of New Plastered Surfaces of wall and applying two coats of cement base paint over a coat of primer on surfaces of walls complete all as specified and as directed.
Material and Labour for Preparation of New steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
Complete removal of existing treatment on old wall surfaces, preparing surfaces, providing material and labour and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
Complete removal of existing treatment on old wall surfaces, preparing surfaces, providing material and labour and applying two coats of acrylic Smooth exterior paint of any shade over one coat of priming coat of exterior primer complete all as specified and as directed
Preparation of Old painted plastered surfaces of wall, providing material and labour and applying one Coat of cement base paint complete all as specified and as directed.
Preparation of Old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed.
Preparation of new steel and iron surfaces of any description, not exc 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc primer complete all as specified and as directed.
Preparation of Old painted Steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Mr Madhusudhan Kotarki (BID ID -3353191)
M/s S.L.Chablani (BID ID -3354531)
M/s.Santosh Kotarki (BID ID -3353351)
AMAR CONSTRUCTION (BID ID -3353505)
Siddique constructions (BID ID -3354182)
NAYANA CONSTRUCTIONS (BID ID -3352411)
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .