Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹1.8 L
Closing Date
16 Oct 2026, 5:00 pm
Krishna Bhagya Jala Nigam Limited
Amregouda
Supplying & Fixing of Air Valve to Raising Main for Pump No. 1 & 2 at CLIS Headwork
KBJNL/2026-27/LI/WORK_INDENT3551
KBJNL/2026-27/LI/WORK_INDENT3551
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KBJNL Division ALBC Division Almatti
8 documents required · 8 mandatory
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. Satisfactorily completed (at least 90% of the contract value) as prime contractor, at least one similar work such as Repair of Electro-Mechanical Components in major LIS / AME of Major LIS Headwork with 110/6.6 KV Sub-station and above of value not less than Rs. 58.60 Lakhs. (Usually not less than 50% of Estimated Value of Contract). (Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weightage of 10% per year to bring them to the price level of FY in which the tenders are invited and the necessary work done certificate issued by an officer not below the rank of Executive Engineer / Equivalent officer of the concerned division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government under taking within India)
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. To qualify for award of this contract, Executed in any one financial year, for the following minimum quantities of work (Usually 80% of the peak annual rate of construction). 1) Supplying, Erection, Commissioning & Testing of 11 kV, 630 Amps, 12.5 KA Auto reclosures - 3 Sets. 2) Providing and Fixing 6 mm clear/ Opal white/ Solar bronze / Blue/ Green tinted multi wall poly carbonate sheet for tubular structures - 600 Sqm. (The necessary work done certificate issued by an officer not below the rank of Executive Engineer / Equivalent officer of the concerned division and counter signed by the Superintending Engineer of the same circle or equivalent in case of other Government under taking within India)
Assessed available tender capacity-AxNx1.5-B where A-Maximum value of civil engineering works executed in any one year during the last five years at 2026-27 price level (updated to the Financial year in which the tender is invited) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which Tenders are invited - 0.50 years (6 Months) . B-Value at 2026-27 price level (updated to the Financial year in which the tender is invited) of existing commitments and on-going works to be completed during the next 0.50 years (6 Months) (period of completion of the works for which Tenders are invited). Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. Achieved in at least two financial years a Minimum financial turnover (in all classes of civil engineering construction works only of Rs.234.20 Lakhs usually not less than 2 times the estimated annual payments under this contract) and updated to the financial year in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the financial year in which the tenders are invited
Liquid Assets And / Or Availability of Credit Facilities of Not Less Than Rs. 58.60 Lakhs from any Nationalized / scheduled bank (credit lines / letter of credit / certificates from banks for meeting fund requirement etc) Usually Equivalent to The Estimated Cash Flow For 3 Months in The Peak Construction Period.
A copy of the valid Super Grade Electrical Contractor Registration Certificate
Copy of Valid Employees Provident Fund Registration Certificate
Copy of Valid GST Registration Certificate.
The requisite Earnest Money Deposit in e-cash
Annual Turnover Certificate
Bid Capacity Details
A copy of PAN Card
The intending bidder shall upload self-attested letter pad mentioning latest communication address, land phone & mobile Phone.
The amount put to tender is Exclusive of GST and the tenderer should quote without GST. However, GST will be paid at prevailing Rate during billing.
The Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.
₹2,930
₹1.8 L
24 Sept 2026
24 Sept 2026
19 Oct 2026
12 Oct 2026
12 Oct 2026
Supplying & Fixing of Air Valve to Raising Main for Pump No. 1 & 2 at CLIS Headwork
Supplying, fixing and commissioning C.I Tamper proof Air valve of approved make body and seat ring of bronze PN 1.6 conforming to IS: 14845 of specified diameter with all fixtures including cost of al...
Supplying, Erection, Commissioning & Testing of 11 kV, 630 Amps, 12.5 KA Auto reclosures with control panel including necessary hardware structure protection system etc., as per specification of make ...
Oil filled Current Transformer 0.2s/PS/5P20 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification complete with all leads and...
Single phase, oil filled, outdoor type VT with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification complete with all leads and lifts a...
Supply, Erection, Installation and Commissioning of Netural Current Transformer of 11kV class CT with PS accuracy class of 11kV NCTs 600-300/1-1-1A complete with all leads and lifts and as per directi...
Supply, Installation and Commissioning of Numerical Back up protection relay suitable for 400 kV and 220 kV, 110 kV and 66 kV System compatible to IEC 61850 protocol complete with all leads and lifts ...
Supply, Installation and Commissioning of Three Phase Trip Relay / Master Trip Relay suitable for C & R panels at 110 kV and 66 kV Stations complete with all leads and lifts and as per directions of E...
Supply, Installation and Commissioning of Numerical Restricted Earth Fault Relay for 400 kV, 220 kV class ICTs/Power Transformers and 110 kV, 66 kV class Power Transformers with IEC 61850 communicatio...
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...
Supply of 1.1kV LTUG XLPE Insulated Cables as per IS-7098 (Part-1) with following parameters and as per BESCOM Requirements: H2/H4 grade Aluminium Conductor having purity of 99.7 percentage, Conductor...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Work of supply, erection and commissioning of indoor upto 250 Amps distribution panel as specified below: Supply, erection and commissioning of Indoor type upto 250 Amps MCCB distribution panel with o...
Work of supply and fixing of 40 amps star delta panel Boards upto 15Hp backwash pump motor as specified below: a. Supply and fixing of new upto 15 Hp star delta starter panel board for back wash motor...
Supply of Hydraulic oil for pumps at ALBC and CLIS Headworks.
Supply of Grease GEM-RR3 for pumps and motors at ALBC & CLIS Headwork.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...
Providing and fixing on wall face unplasticised Rigid water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion (i) ...
Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments. For 110 mm dia PVC REDUCER complete wit...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Scope of Work.docx
Others - Scope of Work • 0.07 MB
mile_stone-3351.pdf
Others - mile stone • 0.19 MB
KW-4 - 3551 - General.docx
Tender Document • 8.00 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .