REPAIR TO JOINERY, WINDOWS, DOORS, ATT, ROOF TREATMENT ETC AND ALLIED WORKS AT OFFICERS MD ACCN IN NAVAL PARK, AMZARI PARK, BSO AND GE OFFICE PREMISES AREA UNDER OF GE (NB) VISAKHAPATNAM.

Amount

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description n,exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n,exc 1 Sqm each and re-fixing the shutter in same opening after necessary repairing work complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each and re-fixing the shutter in same opening after necessary repairing work complete all as specified and directed.

Resecuring or easing & adjusting without taking down the shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, clause 8.24 (a) complete all as specified and directed

S & F 35 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated, but with sash bars for window and ventilators etc are provided styles and rails any numbers and prepared to receive glass, gauze, etc edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I clause 8.24(b) complete all as specified and directed

S & F 30 mm thick, factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S & F Well seasoned 1st (first) class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 40 mm thick, 1st (first) class hardwood(Teak), factory made, Plain framed, panelled shutter (any number of panel) , panels of timber flat on both sides (feather edged) , lock rail and bead is provided and planted round the panels (for each side) The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L for Preparation of of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic varnish liquid transperant over a coat of wood filler complete all as specified and directed.

S&F in repair 600 mm long and minimum 25mm dia decorative type brass handles including all nuts and bolts complete all as specified and directed.

S&F brass barrel tower bolts, 200 mm long with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S&F brass barrel tower bolts, 150 mm long with cast or sheet barrel and rolled or cast bolts complete all as specified and directed.

S & F in repair 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm size, mild steel barrel tower bolts, stove enamelled black with bright bolt complete all as specified and directed.

S & F 100 mm size, butt hinges, of cast brass with mild steel hinge pin, bright polish, type B-11 complete all as specified and directed.

S & F in repair 100 mm size, butt hinges, of cast brass with mild steel hinge pin, bright polish, type B-11 complete all as specified and directed.

S & F in repair 100 mm size, butt hinges of medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 75 mm size, butt hinges of medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 50 mm size, butt hinges of medium weight cold rolled mild steel complete all as specified and directed.

S & F 150 mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F in repair 150 mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 125 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 125 mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 125 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repair 125 mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S & F Mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, etc complete all as specified and directed.

S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

S & F in repair Mild Steel sliding door bolts, 250 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, etc complete all as specified and directed.

S & F Floor door stopper, 140 mm overall length of cover plate, alluminium body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F Floor door stopper, 140 mm overall length of cover plate, brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair Floor door stopper, 140 mm overall length of cover plate, alluminium body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair Floor door stopper, 140 mm overall length of cover plate, brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

S & F in repairs, 100 mm, 2 lever, Brass, Mortice Lock, vertical type complete all as specified and directed.

S & F in repairs 100mm mortice latch brass body, 6 lever with two keys, polished bright; vertical type and fixed complete all as specified and directed.

S & F in repairs 150 mm size hasp & staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish outside MD land as directed .

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls using old size brick complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc by "Vacuum based sanding machine" and applying two coats of distemper oil emulsion over a coat of alkali resistant primer by "Auto Roller" and over one or more coats of wall care putty to a smooth surface complete all as specified and directed. (Note: Distempering shall be carried out by smart painting process as specified in PS here-in-after)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty, glazing pin in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty, glazing pin in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply only 5 mm thick, frosted glass, ordinary quality and glazing with wooden beading/rubber beading exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber beads and fixing included with the unit quoted rate of respective UPVC/aluminium shutter)

Supply only 5 mm thick, tinted glass, ordinary quality and glazing with wooden beading/rubber beading exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber beads and fixing included with the unit quoted rate of respective UPVC/aluminium shutter)

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for greasing of existing steel window & door (any type / size) and making suitable opening / closing of shutters including cutting of jambs / cills etc and making good disturbed surfaces as per existing complete all as specified and directed.

S & F in repair 20 mm dia, Aluminium anodised, curtain rod with bracket complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M & L for Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down aluminium door, window and partition (of any type / size) and refixing the same in same position after carring out necessary repair / replacement such as changing of rolling wheels, straighting of edges, bringing at a level with required cutting, adjusting of any depression / projection complete all as specified and directed. (Note: Minor items as requirred like rolling wheels etc shall be supplied by the contractor without any extra cost to the Govt.)

Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+/-0.2)mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Taking down UPVC doors / Window shutters / ventilators of any size carrying out minor repairs / adjastment such as straightening of edges, bringing at a level with required cutting adjusting including replacement of damaged fittings as required size (if any) and refixing in same position complete all as specified and directed.

S&F aluminum powder coated window frame with sliding pattern shutter consisting of 03 (Three) track frame and three shutters using standard medium weight section of weight not less than 0.55 Kg/ Rm with and including necessary handles and locking arrangements for shutter complete all as specified and directed. (Note: (i) Thickness of alluminium section shall not be less than 1.50 mm thick. (ii) Powder coating shall be 50 micron thick minimum. (iii) sections shall be as per stadard engineering practice of approved make)

Supply fabrication and fixing alluminium doors, single shutter type fabricated with anodised alluminium extruded section consisting of frame and shutter as per specification given below with and including alluminium beading, rubber gasket olf suitable size, two Nos alluminium handle of size 230mm, 01 No. hydraulic floor spring, 02 Nos alluminium tower bolt of size 200 mm, 01 No. 5 lever brass lock with two keys shall be fixed on rawal plug, including necessary jointing cleats, glazing clips, rubber packing snap beadings and other accessories complete :- (a) Top and side member of frame shall be of size 63.50 x 38.10 x 2.00 mm. (b) Vertical style of door shutter, both sode shall be of size 85.00x 44.45 x 2.00 mm, (c) Top and bottom rail of door shutter shall be of size 95.25x 44.45 x 2.00 mm. (d) Middle rail of door shutter shall be of size 100.00 x 44.45 x 2.00mm (e) 5.00 mm thick tinted glass shall be provided to top half of the door above middle rail. (f) 12 mm thick prelaminated parrticle board, medium density, interior grade with both side decorative lamination shall be provided to bottom half of the door below middle rail complete all as specified and directed. (Note: (i) Thickness of alluminium section shall not be less than 1.50 mm thick.)

Supply and fixing in repairs Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

S & F 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed.

S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed.

S & F 12 mm thick, plywood, grade MR, fixed with screws, nails to timber frame work, etc complete all as specified and directed.

S & F 12 mm thick, plywood, grade BWP, type BB, fixed with screws, nails to timber frame work, etc complete all as specified and directed.

S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F in repairs Steel rolling shutters, manually operated, 1.25mm thickness of lath with out ball bearing, as specified including top cover, an-choring rod, hasp and staple and one shop coat of primer; erected in position as indi-cated, complete: push pull or manual type complete all as specified and directed.

M & L for Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S & F in repair 1.25 mm thick, Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S & F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of aluminium paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

Repair to existing shutter of rolling shutter of size n.exc 6.00Sqm each by welding in position, oiling, greasing of rollers etc including replacement of minor accessories to make shutter smooth functioning/movement complete all as directed by the Engr-in-Charge.

S & F in repair FRP sheet 2mm thick as covering to grills or as view cutter, fixed with self tapping screwscomplete all as specified and directed as per specification and directed

S & F In repairs, 5 mm thick rubber beading strips for entrance doors, Minimum 0.5mm thick, 30 to 50mm wide to arrest entry of insects including fabric dust remover fixed at the bottom of the strip complete all as specified and as directed.

M & L for post construction Antitermite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed.

M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

S & F in repair stainless steel sliding / telescopic channel of length 500mm with 03 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm with and including necessary fixing arrangement complete all as specified and directed.

Taking down and re-fixing stainless steel sliding / telescopic channel of length 500mm with 03 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm complete all as specified and directed.

S&F in repair gate and shutter , hooks and eyes 125 mm size aluminium plate type -II complete all as specified and directed.

S&F in repair magnetic catch for cupboards complete all as specified and directed.

JAYAM BUILD CONSTRUCTIONS (BID ID -3076615)

K NAGARAJU (BID ID -3075699)